Acer Reinstall Of System 7 Hangs At 83%
Sep 7, 2012Tried to reinstall system 7 from the 3 disk backup and it hangs at 83%.
View 3 RepliesTried to reinstall system 7 from the 3 disk backup and it hangs at 83%.
View 3 RepliesIll try to make this short and simple, i had same pc for around 3 years now, finally managed to ruin my first win 7 instalation by being lazy, that resulting in long needed reinstall, no problem there,But after everything was done, my pc started randomly freezing for around 1-5 mins ( depends, usually around 3 mins ) then it just comes back alive like nothing happened, sometimes video driver crashes My first thought was that my hdd finally dying on me, but after numerous test found nothing wrong on any of them and freezes doesnt always occur on hdd usage i ruled that out, some googling blamed it on new video drivers, got other ones, same, still freezing, reseted my bios to default, still same, sometimes i can turn on a game and play 2 hours straight and nothing will happen, next time i can startup movie and it will freeze 2 times in 5 mins, already reinstalled coddecs and video players i am just running out of ideas here, never had this issue before, using same windows 7, same install, same pc and all of my drivers/programs are same ones i used
View 11 Replies View RelatedI have an Acer Aspire One A0751H that's been running Windows XP on a HDD. I've replaced that drive with a 120GB Sandisk SSD and I'm trying to install Windows 7 from an external DVD. I select the custom install path and select the single unallocated partition for installation. It works fine up to the point where it says "Copying Windows files (0%)..." where it hangs. No progress, cursor freezes, no response. The only other change I've made to the machine is to upgrade the RAM to 2GB of Corsair.I've disabled all other boot devices in bios (no floppy drive)
View 7 Replies View Relatedmy laptop is contiguously hanging by plugging it in?
View 1 Replies View RelatedI already have windows 7 fom start on my acer aspire 521. Then it got slower, so I installed 2Gb memory. Now its getting slower again.So I want to fully reinstall the software from scratch. I do not have an recovery disk from the binning. So what is the procedure and do i have to reformat the c drive or can it be done without?I don't want the old registry and so on, because thats one of the problems I think.
View 1 Replies View RelatedI re installed Windows 7 64 bit and now my laptop runs very very slow. When I look in system resources only 733mb are used
View 3 Replies View RelatedI need to reinstall Windows 7 on my Acer Aspire 7540, but I can't find the disks needed.
View 4 Replies View RelatedHow can i reinstall the sound card on my acer aspire 5750-6589
View 1 Replies View Relatedmy webcam on my acer aspire 5733 does not work i have error 43 on device manager possibly need to reinstall driver but can not found driver software
View 1 Replies View RelatedSystems hangs after seemingly OK boot. Logged in as user but no desktop icons. Rebooted in Safe Mode - seemed OK.Looked @ Event Log. Errors
[code]...
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Dnscache serviceRestarted in Normal Mode. Booted fine and logged in OK. Still get the 7003 errors but system works OK.Has only recently started to happen but I have had to remove a Trojan Virus. All virus checking is OK but I suspect something got damaged.
I had a copy of windows on my computer for about 3 months (non legit key) and with being happy with the O/S i decieded to go out and buy a copy and do a fresh install.Since installing, my 200gb HDD will no longer boot past BIOS post. I dropped it from the system and left my other 300gb HDD in and installed it to the HDD no worries, boots up fine and can use win 7. I then did a software update and now it gets stuck on the windows startup screen....
View 3 Replies View Relatedmy system hangs without any message i have to disconnect the power to shutdown
View 2 Replies View RelatedI have the official RC1. I checked the MD5 sum and it came out fine (for once). I did not burn the DVD at max speed so I could avoid write errors. However, I have tried to boot from the DVD on 3 computers and cant get past the "Press any key to boot from CD" prompt. the weird thing is, all 3 computers display "Press any key to boot from CD o"
I press a key and nothing happens. Why is that little "o" appearing at the end?
Recently, with no system changes, suspicious downloads, or drops in recent history, my 6 Month old Clevo build began exhibiting two very bizarre symptoms:
1) Upon booting, Windows will start normally ,up until the mouse is rendered before the log in screen appears, then the system seems to power down. However, upon pressing the power button, the computer resumes booting right from where it left off as if it had entered a very rapid hibernation mode.
2) When the lid is closed during normal use, even when the system is not set to sleep or hibernate upon a lid closing, the system will hang permanently, with indicator lights like caps lock getting stuck either on or off and the hard drive light not turning on. This requires a hard reset to fix.
I have scanned memory, boot sectors, and the entire hard drive for malicious programs like worms, packers, and rootkits with Avast and Kapersky boot time scans to no avail.The system behaves normally otherwise, except during boot or lid closing. No overheating, screen flashing, or abnormal system processes are occurring. Though I have not yet checked the exact temps or checked the contents of rundll.I have a hunch it is the motherboard, but I don't have the screwdrivers to check or try to reset the SODIMMS.I have found a few questionable errors in the event log, but no strange processes in system resource manager.This is transcript of said questionable error log with all events from past 7 days (as of 11/27/2011) (with said issue arising on the 25th)The Download is 215 Kb compressed and 5 Mb uncompressed with over 7,000 events.On an unrelated note, the event log reports the processor getting underpowered, is this just a momentary thing during bootup or something that could hinder performance?
I have an annoying issue and it only happens about half the time my computer is turned on. When I run a program in "admin mode", the screen goes black and hangs for about 5 seconds, the prompt comes up asking me to approve, I click yes, screen goes black for another 5 seconds then the program comes up. This also happens sometimes when I wake the computer from the screensaver. I also happens when I try to open task manager. With the specs of my computer, there's no reason this should be happening. The computer is only 2 months old. I have run CHKDSK, did sfc /scannow, all are supposedly clean now. I checked my registry for errors, repaired those. Ran an AVG scan, also clean. My graphics drivers are up to date. All of my other drivers should be up to date as well. If I go into the device manager, there are no dreaded "!" icons next to any devices.
View 3 Replies View RelatedI am having a similar problem using the "blank" screen saver with a password...
Purchased a new Dell XPS 8000 three days ago and everything appeared to be working fine. I was using the wired keyboard and mouse supplied with the computer.
Connected my old usb Microsoft Wireless Comfort Keyboard/Mouse 1.0A to the system and suddenly the system would never go to screen saver. I checked for windows updates and it recommended an update for the wireless keyboard and mouse. Installed the update and now my system goes to screen saver.
The problem now is that it doesn't return from screen saver consistently. I am still characterizing the problem... When I move the mouse I get the login screen, type the password, hit return, and the screen goes blank (as if it is back in the blank screen saver).
I have had the desktop reactivate very quickly (normally) if the screen saver was on only for a few minutes. I have had it take 2 minutes plus to get to the desktop. I have also had the system freeze and ended up power cycling.
I thought this was a power management issue. I tried setting up power settings so nothing would ever go into power save mode but this hasn't made a difference.
I just reconnected my wired keyboard and mouse to see if the issue goes away. I am expecting this to solve it, but I really would like to use the wireless.
Update...
1. Went back to wired mouse/keyboard and the issue persisted.
2. Rolled back updates from last Windows 7 update: Dell Monitor 6/21/2009 1.0.0.0, Microsoft (HID Class) 5/8/2009 7.00.258.0, and Microsoft (USB) 11/03/2009 7.10.344.0. Problem still persisited.
3. Did a "reset to defaults" on the Dell power settings profile and removed the password from the blank screen saver. Seemed to resolve the issue, but only tried it once with the screen saver on for an hour.
4. Added the password back to the screen saver. Worked once and then hung the computer the 2nd time. I move the mouse, get the login screen, type my password, hit return, and the monitors go blank (as if it is in the blank screen saver). At this point it is hung, no mouse, no keyboard, ... must power cycle to get the system back up and running.
Yet another update...
Found a "solution" (let's call it a work around) for this issue in another thread: Seven locks up after an hour or so idle. I had my task bar set to auto hide, changed it to be visible all of the time and no more system hangs.
While I am thrilled to not have to power cycle everytime I go to screen saver, I would still like to auto hide the task bar. I wonder if there isn't a better fix that would allow me to still configure the task bar.
XPS 8000, 8 GB Ram, 1 TB Hard Drive, ATI 4630 graphics.
im having an issue frequently with my hp pavilion dv6 laptop.the thing is the cursor starts to freeze and becomes so slow which leads to a system crash.the system begins to hang/cursor freezes,at the same time i can hear the cpu fan sound high.and wen i restart it,it works fine for some sessions.c
View 1 Replies View RelatedI have installed sony vegas pro 11 and been working for some time. Recently I have added ASUS 210Silent ( GE Force Physx HDMI) 1 GB DDR3 Graphics card. All went well for one month. Now, whenever I try to import video clips into vegas pro 11, I am unable to import the clips. The vegas pro hangs up and I get the following message every time."Windows has detected your computer's performance is slow. This could be because there are not enough sourcesto run the windows Aero colour scheme. To improve performance, try changing the color scheme to Windows 7 Basic"Not only vegas pro, but the entire system hangs up including internet.The following is my PC configuration OS Windows 7 Ultimate 32 bits OS Pentium (R) Dual core CPU E 5400 @ 2.70 GHZ Ram 2.00 GB No Pen or Touch input for the display Hard disc Nearly 466 GB System Rating 4.3 Windows Experience Index
View 1 Replies View RelatedI was having this problem earlier too, but i reinstalled windows 7 and now it was fine till i today used windows update to install service pack one. Now im getting hangs again.
No BSOD's have been seen yet, but its hanging up yeah(Screen freezes, keyboard lights go out and voice outputs a big 'ZZZZZZZZ' ) I cant provide much more detail
System hangs after installations like Windows 7 update,tune up utilities,new hardwares(data cards) etc which requires windows restart.windows hangs and blue screen appears after several minutes.Pls help. [code]
View 9 Replies View RelatedI'm doing a clean install of 7 ultimate x64, I've got another hd with the rc installed that has been running for a while so I know the hardware works under 7.
If I boot the new install with my 5 port usb pcix card, it detects a "pci-to-pci bridge" starts to install drivers, and then the whole system hangs. I've tried taking everything else out, no joy.
Any suggestions on how to get this device installed?
SYBA PCI-Express USB 2.0 5 Ports Controller Card Model SD-PEX-NEC5U - Add-On Cards
why system hangs when i try to upload any file to any site eg. i m trying to upload a photo in Facebook, my system hanged uo and no mouse, keyboard or Alt+Ctrl+ Del is working 1st time when this happens i wait for around half and hour and press the power Switch to shutdown.when i tried again the same problem happens, i tried in other sites also in Naukri.com, Monster.com in Orkut.com with JPEG, Doc and Pdf files.
View 1 Replies View RelatedI have just built a new system consistsing of the following:
Asus M5A78L/USB3 AMD Socket AM3
Kingston 8GB (2x4GB) DDR3 1333MHz i5 Memory Kit Non-ECC CL9
AMD Phenom II X2 555 Black Edition 3.2GHz Socket AM3 6MB Cache
Western Digital WD20EARS 2TB Hard Drive SATAII 64MB Cache - OEM Caviar Green
Powercool 550W 80plus Certified Efficienty PSU - 1x PCI-E 4x SATA
Arctic Cooling Freezer 7 Pro rev 2 Socket 775, 1156, 1155, 1366, AM2, AM3 Heatpipe CPU Cooler
Windows 7 Home Premium 64-Bit SP1
The initial build of the system went as planned until I activated the CPU overclocker on the ASUS motherboard. When this is on the system seems to boot ok and starts to load windows but then hangs and all I get is a blank black screen.I have had to reboot and reset the motherboard to the default values to get it to work ok.
Recently my computer has a problem, I want to try to reinstall the system.But I do not know how to do! Who has a simple method to reinstall the system?I just need win7 Home Edition?
View 7 Replies View Relatedmy system32 is crackaed so how to reinstall it
View 1 Replies View RelatedI've a problem that the Downloads folder on my system is opening very slow and at times it makes the system to freeze. This happens only when I try to access the contents of that folder. I've tried the following till now and havn't yet solved this problem.Scanned for viruses or spywares in the system. Used MBAM and TDSSKiller. No infections.Switched the View of that folder from Large Icons to Detail or List View.Customized the folder for "General" items. Right click on folder->Properties->Customize tab->Optimize this folder for General ItemsDefragmented the folder using Piriform Defraggler.So anyone knows what's going wrong with my system.
View 1 Replies View RelatedI recently had a really annoying virus which would not go away, after 7 days of fighting with it I decided the best course of action would be to format and reinstall win 7. However now my PC is super slow, I cannot open desktop items, without right clicking and selecting "Run as Admin" and even that is really slow. If I right click and select "Personalize" it hangs for ages then says "Server Execution Failed".
View 7 Replies View RelatedI had a power loss while installing a windows update about two months ago. Ever since then my system will hang either on logging off or shutting down.I have tried making a new user (No Help)it hangs in safe mode also.I also do not have a list of prior updates in control panel since this problem.The system works fine other than that.
View 1 Replies View RelatedDell inspiron 580 with core i5-760 @ 2.8ghz and 4gb DDR3 RAM, windows 7 home premium an nvidia geforce 310. My system gets hang at windows logo while starting, while system is shutting down. Have nayone come across about this problem earlier. Is the nvidia Graphic card causing the problem? I have even restored my PC by the problem still the same.
View 6 Replies View RelatedA few weeks ago I bought a DELL computer with the Windows 7 Home Premium. Is there a way to reinstall Windows with the preinstalled system?
View 1 Replies View RelatedAcer Aspire 17.3 laptop. had black screen with a few words eg. no system. used F10 and now have Windows Boot Manager black page with Windows failed to start and 1,2,3 insert disk and restart. choose Enter and it offers Window 7 Enter or F8. all choices come back to these same 2 pages. Ctrl+Alt+Del brings me back as well. the following words apper each time. FILE windowssystem 32win load.exe STATUS oxc 000000f INFO the selected entry could not be loaded because the application is missing or corrupt
View 5 Replies View Related