I had a copy of windows on my computer for about 3 months (non legit key) and with being happy with the O/S i decieded to go out and buy a copy and do a fresh install.Since installing, my 200gb HDD will no longer boot past BIOS post. I dropped it from the system and left my other 300gb HDD in and installed it to the HDD no worries, boots up fine and can use win 7. I then did a software update and now it gets stuck on the windows startup screen....
Systems hangs after seemingly OK boot. Logged in as user but no desktop icons. Rebooted in Safe Mode - seemed OK.Looked @ Event Log. Errors
[code]...
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Dnscache serviceRestarted in Normal Mode. Booted fine and logged in OK. Still get the 7003 errors but system works OK.Has only recently started to happen but I have had to remove a Trojan Virus. All virus checking is OK but I suspect something got damaged.
I have the official RC1. I checked the MD5 sum and it came out fine (for once). I did not burn the DVD at max speed so I could avoid write errors. However, I have tried to boot from the DVD on 3 computers and cant get past the "Press any key to boot from CD" prompt. the weird thing is, all 3 computers display "Press any key to boot from CD o"
I press a key and nothing happens. Why is that little "o" appearing at the end?
Recently, with no system changes, suspicious downloads, or drops in recent history, my 6 Month old Clevo build began exhibiting two very bizarre symptoms:
1) Upon booting, Windows will start normally ,up until the mouse is rendered before the log in screen appears, then the system seems to power down. However, upon pressing the power button, the computer resumes booting right from where it left off as if it had entered a very rapid hibernation mode.
2) When the lid is closed during normal use, even when the system is not set to sleep or hibernate upon a lid closing, the system will hang permanently, with indicator lights like caps lock getting stuck either on or off and the hard drive light not turning on. This requires a hard reset to fix.
I have scanned memory, boot sectors, and the entire hard drive for malicious programs like worms, packers, and rootkits with Avast and Kapersky boot time scans to no avail.The system behaves normally otherwise, except during boot or lid closing. No overheating, screen flashing, or abnormal system processes are occurring. Though I have not yet checked the exact temps or checked the contents of rundll.I have a hunch it is the motherboard, but I don't have the screwdrivers to check or try to reset the SODIMMS.I have found a few questionable errors in the event log, but no strange processes in system resource manager.This is transcript of said questionable error log with all events from past 7 days (as of 11/27/2011) (with said issue arising on the 25th)The Download is 215 Kb compressed and 5 Mb uncompressed with over 7,000 events.On an unrelated note, the event log reports the processor getting underpowered, is this just a momentary thing during bootup or something that could hinder performance?
I have an annoying issue and it only happens about half the time my computer is turned on. When I run a program in "admin mode", the screen goes black and hangs for about 5 seconds, the prompt comes up asking me to approve, I click yes, screen goes black for another 5 seconds then the program comes up. This also happens sometimes when I wake the computer from the screensaver. I also happens when I try to open task manager. With the specs of my computer, there's no reason this should be happening. The computer is only 2 months old. I have run CHKDSK, did sfc /scannow, all are supposedly clean now. I checked my registry for errors, repaired those. Ran an AVG scan, also clean. My graphics drivers are up to date. All of my other drivers should be up to date as well. If I go into the device manager, there are no dreaded "!" icons next to any devices.
I am having a similar problem using the "blank" screen saver with a password...
Purchased a new Dell XPS 8000 three days ago and everything appeared to be working fine. I was using the wired keyboard and mouse supplied with the computer.
Connected my old usb Microsoft Wireless Comfort Keyboard/Mouse 1.0A to the system and suddenly the system would never go to screen saver. I checked for windows updates and it recommended an update for the wireless keyboard and mouse. Installed the update and now my system goes to screen saver.
The problem now is that it doesn't return from screen saver consistently. I am still characterizing the problem... When I move the mouse I get the login screen, type the password, hit return, and the screen goes blank (as if it is back in the blank screen saver).
I have had the desktop reactivate very quickly (normally) if the screen saver was on only for a few minutes. I have had it take 2 minutes plus to get to the desktop. I have also had the system freeze and ended up power cycling.
I thought this was a power management issue. I tried setting up power settings so nothing would ever go into power save mode but this hasn't made a difference.
I just reconnected my wired keyboard and mouse to see if the issue goes away. I am expecting this to solve it, but I really would like to use the wireless.
Update...
1. Went back to wired mouse/keyboard and the issue persisted.
2. Rolled back updates from last Windows 7 update: Dell Monitor 6/21/2009 1.0.0.0, Microsoft (HID Class) 5/8/2009 7.00.258.0, and Microsoft (USB) 11/03/2009 7.10.344.0. Problem still persisited.
3. Did a "reset to defaults" on the Dell power settings profile and removed the password from the blank screen saver. Seemed to resolve the issue, but only tried it once with the screen saver on for an hour.
4. Added the password back to the screen saver. Worked once and then hung the computer the 2nd time. I move the mouse, get the login screen, type my password, hit return, and the monitors go blank (as if it is in the blank screen saver). At this point it is hung, no mouse, no keyboard, ... must power cycle to get the system back up and running.
Yet another update...
Found a "solution" (let's call it a work around) for this issue in another thread: Seven locks up after an hour or so idle. I had my task bar set to auto hide, changed it to be visible all of the time and no more system hangs.
While I am thrilled to not have to power cycle everytime I go to screen saver, I would still like to auto hide the task bar. I wonder if there isn't a better fix that would allow me to still configure the task bar.
XPS 8000, 8 GB Ram, 1 TB Hard Drive, ATI 4630 graphics.
im having an issue frequently with my hp pavilion dv6 laptop.the thing is the cursor starts to freeze and becomes so slow which leads to a system crash.the system begins to hang/cursor freezes,at the same time i can hear the cpu fan sound high.and wen i restart it,it works fine for some sessions.c
I have installed sony vegas pro 11 and been working for some time. Recently I have added ASUS 210Silent ( GE Force Physx HDMI) 1 GB DDR3 Graphics card. All went well for one month. Now, whenever I try to import video clips into vegas pro 11, I am unable to import the clips. The vegas pro hangs up and I get the following message every time."Windows has detected your computer's performance is slow. This could be because there are not enough sourcesto run the windows Aero colour scheme. To improve performance, try changing the color scheme to Windows 7 Basic"Not only vegas pro, but the entire system hangs up including internet.The following is my PC configuration OS Windows 7 Ultimate 32 bits OS Pentium (R) Dual core CPU E 5400 @ 2.70 GHZ Ram 2.00 GB No Pen or Touch input for the display Hard disc Nearly 466 GB System Rating 4.3 Windows Experience Index
I was having this problem earlier too, but i reinstalled windows 7 and now it was fine till i today used windows update to install service pack one. Now im getting hangs again.
No BSOD's have been seen yet, but its hanging up yeah(Screen freezes, keyboard lights go out and voice outputs a big 'ZZZZZZZZ' ) I cant provide much more detail
System hangs after installations like Windows 7 update,tune up utilities,new hardwares(data cards) etc which requires windows restart.windows hangs and blue screen appears after several minutes.Pls help. [code]
I'm doing a clean install of 7 ultimate x64, I've got another hd with the rc installed that has been running for a while so I know the hardware works under 7.
If I boot the new install with my 5 port usb pcix card, it detects a "pci-to-pci bridge" starts to install drivers, and then the whole system hangs. I've tried taking everything else out, no joy.
Any suggestions on how to get this device installed?
SYBA PCI-Express USB 2.0 5 Ports Controller Card Model SD-PEX-NEC5U - Add-On Cards
why system hangs when i try to upload any file to any site eg. i m trying to upload a photo in Facebook, my system hanged uo and no mouse, keyboard or Alt+Ctrl+ Del is working 1st time when this happens i wait for around half and hour and press the power Switch to shutdown.when i tried again the same problem happens, i tried in other sites also in Naukri.com, Monster.com in Orkut.com with JPEG, Doc and Pdf files.
I have just built a new system consistsing of the following:
Asus M5A78L/USB3 AMD Socket AM3 Kingston 8GB (2x4GB) DDR3 1333MHz i5 Memory Kit Non-ECC CL9 AMD Phenom II X2 555 Black Edition 3.2GHz Socket AM3 6MB Cache Western Digital WD20EARS 2TB Hard Drive SATAII 64MB Cache - OEM Caviar Green Powercool 550W 80plus Certified Efficienty PSU - 1x PCI-E 4x SATA Arctic Cooling Freezer 7 Pro rev 2 Socket 775, 1156, 1155, 1366, AM2, AM3 Heatpipe CPU Cooler Windows 7 Home Premium 64-Bit SP1
The initial build of the system went as planned until I activated the CPU overclocker on the ASUS motherboard. When this is on the system seems to boot ok and starts to load windows but then hangs and all I get is a blank black screen.I have had to reboot and reset the motherboard to the default values to get it to work ok.
I've a problem that the Downloads folder on my system is opening very slow and at times it makes the system to freeze. This happens only when I try to access the contents of that folder. I've tried the following till now and havn't yet solved this problem.Scanned for viruses or spywares in the system. Used MBAM and TDSSKiller. No infections.Switched the View of that folder from Large Icons to Detail or List View.Customized the folder for "General" items. Right click on folder->Properties->Customize tab->Optimize this folder for General ItemsDefragmented the folder using Piriform Defraggler.So anyone knows what's going wrong with my system.
I recently had a really annoying virus which would not go away, after 7 days of fighting with it I decided the best course of action would be to format and reinstall win 7. However now my PC is super slow, I cannot open desktop items, without right clicking and selecting "Run as Admin" and even that is really slow. If I right click and select "Personalize" it hangs for ages then says "Server Execution Failed".
I had a power loss while installing a windows update about two months ago. Ever since then my system will hang either on logging off or shutting down.I have tried making a new user (No Help)it hangs in safe mode also.I also do not have a list of prior updates in control panel since this problem.The system works fine other than that.
Dell inspiron 580 with core i5-760 @ 2.8ghz and 4gb DDR3 RAM, windows 7 home premium an nvidia geforce 310. My system gets hang at windows logo while starting, while system is shutting down. Have nayone come across about this problem earlier. Is the nvidia Graphic card causing the problem? I have even restored my PC by the problem still the same.
I have spent all day failing to install Windows 7 on my system. The only thing I have done since the last successful install is to create a RAID 5 using 3 259GB HDDS. The system worked when the 3 HDDs were not RAIDed, but now installation hangs after the second restart. All I get is the black screen with the mouse arrow; nothing else. I tried the cmpmgmtloader solution and disabled the network adaptor and usb controller which were showing as having problems. I even tried un-RAIDing the HDDs and going back to the original state and still it hangs.
I have been having problems trying to install Steam on my computer. Everything is up to date on the system. When I click on link through steam to install it starts the process however it gets to a window where it says updating steam and it hangs.I have no idea what else to do.Tried different browsers still same problem.I have Windows 7 pro 64
I have downloaded SP1 for W7-x64 with Windows Update. It's trying to install now, but has been on "installing update 1 of 1" for over two hours at about 1/3 of the progress bar.
Is this a known issue? I have had problems installing other Windows updates too and hoped installing SP1 would fix this once and for all.
I'm putting together a HTPC using a ASUS E35M1-I Deluxe (AMD Zacate mobo/cpu combo), 30GB Kingston SSD, and 4Gb Crucial DDR3 1066.Problem is when I boot from the Windows install disk I get the "Windows is Loading Files" status bar but when it gets the end it just hangs there. Usually it boots right into the next Windows loading screen. So before I start troubleshooting I want to make sure there's nothing special I need to do with the SSD before installing Windows. Its a brand new drive but I'm pretty certain during the installation process there's a Format option. The Windows install disk was burned from an ISO using IMG Burn at 16x. Before I left for work I started another burn (with img verification) at 8x. But I'm not certain that will help. I've burned plenty of images at 16x speeds without issue.
I recently did a clean install from Windows XP to Windows 7 64 bit on my computer. Setup works just fine and installs correctly. After setup is finished windows tries to startup but it hangs after the starting windows screen.
My specks are (custom computer I bought from friend) Asus A8N SLI motherboard AMD Athlon 64 X2 Dual 3800+ OCZ PC 3200 400 MHZ 1024 MB Dual channel (x2) memory Zotac nvidia GeForce 210 graphics card
I've been trying to perform a clean install the latest 32-bit Windows 7 RC and keep encountering indeterminate problems.
After updating to the latest BIOS, resetting all BIOS settings, and removing all of my peripherals, sound card, and video card (I used built-in video for the most recent install attempt), I still get either a BSOD (Stop 0x0000001a MEMORY_MANAGEMENT) or a hang (with misc. video distortion) at some point during the install, usually after 'expanding files' during the windows install. A few times the screen has just gone blank.
(Before doing all this, I was getting IRQL_NOT_LESS_THAN_OR_EQUAL BSODs, but those seem to have gone away after I removed everything).
As background, the system successfully passed the upgrade advisor and completes the memory test available from the boot loader and has been a rock-solid XP machine for 2 years (although I'm not doing an upgrade install)
I'm at a bit of a loss as to what to do next. I could sit around and twiddle BIOS memory settings, I suppose, but I'm hoping someone can suggest a more principled approach.
I attempted a windows 7 install on an x64 and x32 system several times with the same result. The Upgrade runs until the last stage and then hangs. I looked at the logs but didn't see any errors. All my systems are custom built using Vista ultimate OEM additions.I was successful installing the software as a new install.I updated all the drivers.
I haven a brand new pc with intel 8 core i7 and 16 gb ram and a asus p8z77-LX motherboard
So I go and buy all this and I then go to install windows 7 ultimate and then nope it just hangs on starting windows ahh I can't find anything that works in the forums and ite not the PSU.
1) Download Cumulative Security Update for Internet Explorer 8 for Windows 7 (KB2647516) 2) PC crashes while making a restore point.3) Reboot - normal startup. But when I shut down later, the update tries to install and the installation hangs. After disc activity ceases, I shut down manually.4) Reboot - normal startup.At this point, I decided to use System Restore to clean out any residue from the failed install before downloading the patch again. Yup, you guessed it, I used the damaged restore point. D'oh!5) PC reboots as part of restore process - I get a startup error.6) Scan for problems - attempt repair - recieve the following error. "StartRep.exe Application Error. The instruction at 0x75bc9a45 referenced memory at 0x538e0e85. The memory could not be read"7) I try to restore to an earlier point, but the restore fails."System Restore failed while mounting the registry from the restore point. Unspecified error (0x80070020)"8) I close System Restore window and PC reboots automatically - normal startup.9) I recieve a notification from "Solve PC Issues" in the taskbar saying Microsoft Security Essentials is out of date and would I like to update?
So here I am. My PC appears to be running smoothly, but I don't know if there's any hidden damage in the system. I still want to clear out any residue from the failed install before I download the patch again, but now I'm wary of using System Restore. Also, the MSE update notification has me puzzled - the last restore point I tried to restore to preceeded an MSE definitions update, but that restore failed (didn't it?) and anyway, I don't normally recieve definitions update notifications from "Solve PC Issues". This las left me unsure where my system is at restore point-wise right now.
I've spent my whole day trying to figure out what is going on with this to no avail What I've Done: Installed Windows 7 ultimate 64-bit OS on Crucial M4 drive that was acting up and freezing Continued freezing after installing drivers, stable for 10-30mins then freeze, requires hard reset every time updated FW to 000F as recommended, same deal
Specs as follows: Acer Aspire 8943G Intel Core i3-350M processor @ 2.26GHz, 3MB L3 cache ATI Mobility Radeon HD 5650 8GB memory 500GB Western Digital mechanical HDD 128GB Crucial M4 SSD
I have an Acer Aspire One A0751H that's been running Windows XP on a HDD. I've replaced that drive with a 120GB Sandisk SSD and I'm trying to install Windows 7 from an external DVD. I select the custom install path and select the single unallocated partition for installation. It works fine up to the point where it says "Copying Windows files (0%)..." where it hangs. No progress, cursor freezes, no response. The only other change I've made to the machine is to upgrade the RAM to 2GB of Corsair.I've disabled all other boot devices in bios (no floppy drive)