I'm using a bridged connection so that my ps3 can connect through my computer (better speed then with ps3s wireless), but I have a small problem.
the ps3 can connect to the internet and everything seems to work fine, but after 10 min of gaming I will get a network error saying that I'm not connected to the internet.
After repairing it'll work again. Any idea whats wrong and how to fix it?
Well ive heard that Ivy bridge boost 20% performance and huge in GPU.I dont need Built in GPU.Ivy has integrated USB3.0, PCI 3.0 and thunderbird.Is it really worth to wait for the new Ivy Bridge i5 3570k? versus i5 2500k?I have a lesson for the previous CPU. Bought 3 computer Socket 1156 after 2 months of release!The result? i always got a BSOD.The Sandy bridge 1st release has a problem also with the chipset.If i remember they fix after 2 weeks with the new B3 design.Now guys because im really excited on Ivy bridge.The release date is April 08, 2012 What can you say? is it really safe buying for only a 1 month old after the release? Lets say i wait to buy on May 01, 2012?.Amd is creating a PCI 3.0 Hd 7 Series.
View 9 Replies View RelatedI use a network bridge between my wireless and wired adapters to put my 360 on Live, because the 360 Wireless Network Adapter is just waaaay too expensive. Anyway, it all worked completely fine under XP, but I just installed 7 and there's a couple of things I'm having trouble with...
The network icon in the sytem tray shows either... well, I'm not sure exactly what icon it is when the 360 is on, or a disconnected wireless network icon when it isn't...
what I'd like is the normal wireless network icon with the signal bars (this is more of an annoyance, but I get really annoyed by stuff like this). More seriously, under (as far as I can tell) the same configuration as XP, the 360 can't get an IP address from my router.
If I set it to a static IP, it connects to Live, but complains about "moderate NAT" or some crap, and says that will stop me connecting to some games or players (and it does).
i normal run windows xp on my machine but currently trying out windows 7 but i have a small problem. ok so in xp i create a network bridge with my wireless card and ethernet so that i can connect my xbox 360 to the internet without buying the wireless adapter. now when i try to do this in windows 7 i get an error that says. To create a Network Bridge, you must select atleat two LAN or High-Speed Internet connections that are not being used by Internet Connection Sharing. im useing a lan connection and a high speed wireless connection isnt that all i need....and if it's because of intnert connection sharing how do i turn that off in windows
View 29 Replies View Related I have two network adpatro in win 7 one is lan card network adpator that use ip 10.1.4.100/16 Gw 10.1.1.249 one is VPN network adpator .If it enable , the IP will ber 192.168.2.X /24 .
I want to make bridge and so , the computer from 10.1.4.XXX /16 can use my computer to reach the 19.1.68.2.x . In this case , my PC work as a router .
I try to make bridge with above two adaptor . But after enable the bridge, I still cannot ping ,telnet 192.168.2.XXX from 10.1.4.xxx PC even after setup the route table .
my wireless USB network adapter crapped out on me recently, so I'm trying to run internet through my wireless laptop to my PC using a network bridge but for some reason the internet speed wont stay high. its starts out good and then gets really slow. both laptop and pc are running windows 7 enterprise. keep the internet running at a steady pace?
View 1 Replies View RelatedI am having some issues with Windows 7 and my network bridge. I currently have it setup like this...modem -> router -> laptop -> wireless bridge. The problem is whenever I have the bridge enabled, the port I have open for utorrent is blocked. When I disable the network bridge the port is open again. I have the port open on my router so I dont think thats the problem.
When the bridge is disabled, I use a static IP and everything works well. When the bridge is enabled and I use a static IP, nothing works (not even firefox) and if I don't use a static IP utorrent gets blocked but Firefox works fine.
I was running WinXP before I moved to Windows 7 and there was never a problem...I could have the bridge enabled and it wouldn't effect my utorrent at all.
I recently bought myself a new Netgear Stora MS2110 (network storage), my network situation is a bit strange. I've got my computer connected to a wireless network with internet access, and the Stora now connected to the computer by a wired LAN without internet. I just now discovered that I needed to have internet to setup the Stora, so my question is this - Can I somehow Bridge the wireless network onto the wired network through my computer? giving the Stora internet access and access to the wireless network.
View 5 Replies View Relatedi just installed PC Lin-Q (USB 2 High Speed Bridge Cable) between tow of my Desktop Computers #1 Windows 7 RC1 and #2 Windows XP Pro SP3, installed to Windows 7 RC1 as Windows XP SP3 compat and it works fine !
View 8 Replies View RelatedI was fixing my other laptop and I wiped my external HDD thinking it was the laptop's HDD by mistake. I cleaned it via CMD(SELECT DISK 1, CLEAN) Any ideas to make it back to normal?
View 1 Replies View Relatedi have just built a new rig and i'm having a couple of problems. as i said in the title i have a msi 560 on a asus p67 mobo with a intel i5 2500.i've had the computer for about 2 months now and a few days ago, when i started the computer, a message saying "disk read error, push ctrl + alt + delete" came up. i restarted my comp' a few times and it eventually booted. then today the same message came up and i went through the same process and i got the computer to boot again.this i could deal with however, my computer now has been on for about 16 hours (no big deal) but now it wont play Internet videos and huge artifacts and random triangles and things com up in games like battlefield bc2. the reason i put the time up here is that when i first started the computer it was doing video things fine.
View 1 Replies View RelatedI've been having some BSOD probs, so I'm currently updating all of my drivers. The only one I can't find an update for is called PCI Standard Host CPU Bridge. Could you point me in the right direction, so I can get the update?
Also, for some reason, PCI Standard Host CPU Bridge is listed twice in Device Manager... and both entries seem identical. Would this mean I have to update both?
Some spec info:
Dell Inspiron 1764 Laptop
64 Bit Windows 7 Home Premium (SP1)
Intel Core i5 2.27 GHz
Motherboard: Dell 0TKV96
4 GB RAM
The other thread was really poorly titled, and im getting an issue: Could not find file 'C:msinfo32.nfo'.I have a pc with a 3770k intel cpu and a msi-g45 mobo long story short im getting BSOD's.what seems to happen is ill turn the pc on and it will gradually slow down untill it bsods, it doesnt seem to be affected so much by what i do it seems to inevitably crash though.Ive noticed through CPU-Z where my CPU will jump between around 800-1600mhz to 3700 which of course is a feature with the new chips but after some time itll stop jumping and sit at 1600 and then 800 then my core freq will drop between 100 and 50 and kind of swap around there before crashing.I thought maybe my psu wasnt giving enough power to the chip but i tested that and it seems to be working fine.
View 1 Replies View RelatedLet me explain to you my setup before I explain my problem. I have a desktop computer with a wireless network card which connects to the router and the internet. I have a LAN cable attached from the desktop to my xbox 360. I have both my wireless connections and LAN connection bridged so I can play xbox 360 on xbox live without using the proprietary wireless adapter. My wireless network is capable of connecting to my wireless n router upto 300mbps.
So here is the issue:
When my xbox 360 is on, the Mac Bridge Miniport speed is listed as either 300mbps or sometimes 1Gbps which is good. As soon as I turn it off, the speed drops to 54mbps and stays there. In order for me to get it back to 300mbps I have to delete the Mac Bridge Miniport and recreate it or I have to turn my xbox back on. Is there someway I can make the Mac Bridge Miniport stay at 300mbps always, even when the xbox is off?
I just built desktop with ASUS M4A78 Plus mobo and was getting BSODs constantly using windows 7 64-bit. I just installed XP 32-bit and ti's running fine. One thing I noticed is on XP the south bridge drivers installed but on Windows 7 whenever I tried to install them using catalyst manager or driver from ATI's site it would not install. It would attempt to install the north bridge drivers which the log would say successful but catalyst manger would always say they weren't installed.
Has anyone experienced this problem or now a fix for it?
I bought a new Acer Aspire V3 laptop last week, with the new intel processor. Using it only for 3 days, it started to crash (blue screen). Can you help me please?I have attached the BSOD dump and the system health report.Here is the spec of my pc: x64 bit - windows OS - came pre-installed on system (OEM ) - What is the age of system (hardware)? just a week.What is the age of OS installation (have you re-installed the OS?) NO, it come pre-installed, and I didn't reinstall it.
View 5 Replies View RelatedI'm doing a clean install of 7 ultimate x64, I've got another hd with the rc installed that has been running for a while so I know the hardware works under 7.
If I boot the new install with my 5 port usb pcix card, it detects a "pci-to-pci bridge" starts to install drivers, and then the whole system hangs. I've tried taking everything else out, no joy.
Any suggestions on how to get this device installed?
SYBA PCI-Express USB 2.0 5 Ports Controller Card Model SD-PEX-NEC5U - Add-On Cards
I'm running Windows 7 Enterprise 64-bit edition, not the Beta or RC. I have 3 video cards in my possession (listed below).
- (PCIe) Evga GTX260
- (PCI) Evga 9400GT
- (PCI) Evga Fx5500
Out of those 3 cards I only use the GTX260 and the 9400GT. I had to 'retire' the Fx5500 because the latest WHQL (certified) drivers only provide support as far down as the "6 series" Nvidia cards. Unfortunately the Fx5500 is a "5 series" and falls below that line. I have already tried to use the GTX260 and Fx5500 in previous versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same make of video card - you'll get nothing but errors.
There is the option of going to a place like guru3d.com and downloading a custom supported driver that covers both the GTX260 and Fx5500, but the drivers are not certified and lack support. Therefore, I purchased and now use the 9400GT which is covered under the drivers for the GTX260 and eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.
I've been comparing the specs on the following processors and as a non-gamer the Xeon processors look very attractive. What I like is that Intel offers the choice of a Xeon 80 watt non-graphics processor versus it's 95 watt on-board graphics processor. It would have been nice if Intel offered that same choice in it's Core line. Many users prefer a PCI graphics card and don't use the on-chip graphics, so why not a choice, like with the Xeon line?
View 2 Replies View RelatedAfter a ton of speculation, a bit of denial, and a ton of testing we finally have our answer. The thermal interface material change made by Intel when it went from Sandy Bridge to Ivy Bridge is indeed the cause of the excessive temperatures weve observed while overclocking. The first accusation was made in late-April by Overclockers.com, however proving it wasn't easy. The Japanese division of PC Watch somehow managed to remove the integrated heat spreader from a Core i7 3770k, along with the stock binding and grease. They then proceed to replace it with aftermarket alternatives, and the results speak for themselves.
View 9 Replies View RelatedMy windows 7 machine is unable to connect to my internet through the wireless bridge I've set up on my WRT54G using DD-WRT. It seems to be connected to the network as it sees the other computers that are on it but there is no internet access. Every once in awhile it gains access and then abruptly loses it in a matter of minutes. The router supplies internet to anything else I plug into it, be it my Xbox or laptop running XP.
View 2 Replies View RelatedI installed WinXP-mode to regain the use of a scanner for which there are no Windows 7 drivers; and then I found I could continue using Outlook Express as my email client. I also discovered that dragging items from one desktop to another is NOT possible; BUT from WinXP, I can 'look into' the Windows 7 system. So I created a folder in the root of Windows 7 as a 'clearing house' for file exchange between Windows 7 and WinXP. For convenience, I put a shortcut to that folder on the WinXP desktop. Sad to say, its viability lasts only for the session. When the Windows 7 PC shuts down, the link to that shortcut is broken. Is there a way to make it permanent?
View 2 Replies View Relatedhow can i install Bicycle Bridge (Windows 98 disc)on my Windows 7 computer
View 2 Replies View RelatedI have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies View RelatedUnable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies View RelatedI disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
View 7 Replies View Related