my wireless USB network adapter crapped out on me recently, so I'm trying to run internet through my wireless laptop to my PC using a network bridge but for some reason the internet speed wont stay high. its starts out good and then gets really slow. both laptop and pc are running windows 7 enterprise. keep the internet running at a steady pace?
View 1 RepliesI recently bought myself a new Netgear Stora MS2110 (network storage), my network situation is a bit strange. I've got my computer connected to a wireless network with internet access, and the Stora now connected to the computer by a wired LAN without internet. I just now discovered that I needed to have internet to setup the Stora, so my question is this - Can I somehow Bridge the wireless network onto the wired network through my computer? giving the Stora internet access and access to the wireless network.
View 5 Replies View RelatedMy windows 7 machine is unable to connect to my internet through the wireless bridge I've set up on my WRT54G using DD-WRT. It seems to be connected to the network as it sees the other computers that are on it but there is no internet access. Every once in awhile it gains access and then abruptly loses it in a matter of minutes. The router supplies internet to anything else I plug into it, be it my Xbox or laptop running XP.
View 2 Replies View RelatedWell ive heard that Ivy bridge boost 20% performance and huge in GPU.I dont need Built in GPU.Ivy has integrated USB3.0, PCI 3.0 and thunderbird.Is it really worth to wait for the new Ivy Bridge i5 3570k? versus i5 2500k?I have a lesson for the previous CPU. Bought 3 computer Socket 1156 after 2 months of release!The result? i always got a BSOD.The Sandy bridge 1st release has a problem also with the chipset.If i remember they fix after 2 weeks with the new B3 design.Now guys because im really excited on Ivy bridge.The release date is April 08, 2012 What can you say? is it really safe buying for only a 1 month old after the release? Lets say i wait to buy on May 01, 2012?.Amd is creating a PCI 3.0 Hd 7 Series.
View 9 Replies View RelatedI use a network bridge between my wireless and wired adapters to put my 360 on Live, because the 360 Wireless Network Adapter is just waaaay too expensive. Anyway, it all worked completely fine under XP, but I just installed 7 and there's a couple of things I'm having trouble with...
The network icon in the sytem tray shows either... well, I'm not sure exactly what icon it is when the 360 is on, or a disconnected wireless network icon when it isn't...
what I'd like is the normal wireless network icon with the signal bars (this is more of an annoyance, but I get really annoyed by stuff like this). More seriously, under (as far as I can tell) the same configuration as XP, the 360 can't get an IP address from my router.
If I set it to a static IP, it connects to Live, but complains about "moderate NAT" or some crap, and says that will stop me connecting to some games or players (and it does).
I'm using a bridged connection so that my ps3 can connect through my computer (better speed then with ps3s wireless), but I have a small problem.
the ps3 can connect to the internet and everything seems to work fine, but after 10 min of gaming I will get a network error saying that I'm not connected to the internet.
After repairing it'll work again. Any idea whats wrong and how to fix it?
i normal run windows xp on my machine but currently trying out windows 7 but i have a small problem. ok so in xp i create a network bridge with my wireless card and ethernet so that i can connect my xbox 360 to the internet without buying the wireless adapter. now when i try to do this in windows 7 i get an error that says. To create a Network Bridge, you must select atleat two LAN or High-Speed Internet connections that are not being used by Internet Connection Sharing. im useing a lan connection and a high speed wireless connection isnt that all i need....and if it's because of intnert connection sharing how do i turn that off in windows
View 29 Replies View Related I have two network adpatro in win 7 one is lan card network adpator that use ip 10.1.4.100/16 Gw 10.1.1.249 one is VPN network adpator .If it enable , the IP will ber 192.168.2.X /24 .
I want to make bridge and so , the computer from 10.1.4.XXX /16 can use my computer to reach the 19.1.68.2.x . In this case , my PC work as a router .
I try to make bridge with above two adaptor . But after enable the bridge, I still cannot ping ,telnet 192.168.2.XXX from 10.1.4.xxx PC even after setup the route table .
I am having some issues with Windows 7 and my network bridge. I currently have it setup like this...modem -> router -> laptop -> wireless bridge. The problem is whenever I have the bridge enabled, the port I have open for utorrent is blocked. When I disable the network bridge the port is open again. I have the port open on my router so I dont think thats the problem.
When the bridge is disabled, I use a static IP and everything works well. When the bridge is enabled and I use a static IP, nothing works (not even firefox) and if I don't use a static IP utorrent gets blocked but Firefox works fine.
I was running WinXP before I moved to Windows 7 and there was never a problem...I could have the bridge enabled and it wouldn't effect my utorrent at all.
I have a Sony Vaio laptop, running Windows 7 Home Premium 64bit, Up until 2 days ago I had absolutely no problem using its wifi and/or staying connected to the Internet. Two days ago, however, while being on Skype, my Internet connection got disconnected unexpectedly. �With windows Network Diagnostics,I sometimes get "The DNS server isn't responding", and sometimes "Local Area Connection/Wireless Network Connection doesn't have a valid IP configuration"OR "computer is trying to use a DNS server that is incorrect or doesn't exist."Even with the cable I am not able to connect to the internet so I can't update the network adapter or fix the problem online. Looking at the 'Basic network information and set up connections' (in Control Panel - �Network and Sharing Center) I see my laptop (sometimes connected, sometimes however the line between the laptop and the 'unidentified network' has a yellow triangle on it) �and I can see the 'internet' with a red X on the connection line between that and the 'unidentified network.�When checking the 'Wireless Network Connection Status' it's showing �that it's connected, activity's showing 'sent and received bytes' but says 'no Internet access' to both IPv4 and IPv6 connectivity.I read lots of blogs and advice and tried many of those 'fixes' that were recommended, some of which were the following (shorter versions):�
- unplugging and replugging the power cable to the modem
- resetting the wireless router
-rolling back driver
- �obtaining IP address and DNS server address automatically for Internet Protocol V4 and V6
[code].....
None of the above worked. Right now under 'status' it's showing:
IPv4 connectivity: no Internet access
PIv6 connectivity: no network access
�I've used this network for a while and this is the first time this problem has occurred.�Be it network driver issue or a patch of some sort i may need to download, until i can connect to the internet, I can't fix this problem on my own. In the meanwhile no other computer or phone with wifi in the house has any problem connecting to the Internet.�I took it to a computer technician who said I need to reinstall Windows 7.
I have recently purchased two new notebooks both running windows 7 ultimate 64 bit and I have a 400 Billion Telkom Router with wireless internet capabilities. During the first few days the wireless connection between the router and the laptops worked perfectly and both had internet but then all of a sudden all internet access was lost.
The network was still running and the laptops could connect without any problem but nothing I do will allow me internet access. The same thing happened with a wireless network adapter i purchased for my pc also running windows 7 ultimate 64 bit edition. I should note that the pc using the router is running windows xp and I wonder if it has something to do with a compatibility issue between the two operating systems. I have already tried changing the DNS server and ip adress but nothing seems to work.
I've been battling this problem for a few months now. On my lenovo x100e laptop with windows 7 I can connect to my wifi network and sometimes go to a website before it says "no internet access" while still being connected to the network. Any other laptop or phone connects and has internet just fine except for mine. Just one day out of the blue this started and I cannot find what's wrong and this is only with my laptop. The strange thing is that my laptop connects just fine with other wifi networks and has internet. What I have tried is re installing my wireless router countless times and also I re formated my laptop and re-installed windows twice. Problem is still re accuring.
View 9 Replies View RelatedMy laptop does not connect to the internet on the wireless networks in my flat. It will connect to the network, but will not have internet access. There are several unsecured wireless networks available run by the flat and I can't connect to the internet on any of them, whereas other members of the flats and my flatmates are able to. This suggests there is not a problem as such with the router, turning it off and on again has already been attempted. When I moved in, the man in charge of maintaining/organising etc the flats took my MAC address and allowed my laptop access. Yet I cannot connect to the internet. I went to my uni's library and connected to the internet no problem. I have tried turning off my internet security, looking at the properties of the wireless connection and attempting to edit settings (changing them back again afterwards), and nothing seems to be working.
View 13 Replies View RelatedI have my ip config below:
Windows IP Configuration
Ethernet adapter new:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::ddc2:bdfa:e412:c367%12
Autoconfiguration IPv4 Address. . : 169.254.195.103
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : ............
My laptop does not connect to the internet on the wireless networks in my flat. It will connect to the network, but will not have internet access. There are several unsecured wireless networks available run by the flat and I can�t connect to the internet on any of them, whereas other members of the flats and my flatmates are able to. This suggests there is not a problem as such with the router, turning it off and on again has already been attempted. When I moved in, the man in charge of maintaining/organising etc the flats took my MAC address and allowed my laptop access. Yet I cannot connect to the internet. I went to my uni�s library and connected to the internet no problem. I have tried turning off my internet security, looking at the properties of the wireless connection and attempting to edit settings (changing them back again afterwards), and nothing seems to be working. I have taken a printscreen of my network status here
View 3 Replies View RelatedI'm having a connection issue with my new computer running Windows 7 Professional x64. When I first set it up, the wireless connection worked flawlessly, and then the next day the internet cut out and has not connected since (currently 2 days). Note that I can still connect to the Network, it is just the internet connection that is the issue. Other computers and devices can still connect to the network and internet, and as a temp fix I am using a wired connection to the same router.
My router is a Dynalink RTA1025W Rev2 using WPA2-Personal security, and my computer has a 802.11n Wireless LAN Card.
Release / Renew the IPFlushing the DNSCreating a static IP addressUpdating the wireless driverUninstalling / re-installing the network card / driverResetting the modem/routerResetting the computerDisabling the firewallChanging the security type (tried WEP and none)System restoring the computerWiping the computer back to it's original state I've probably tried a couple more things that have now slipped to the back of my mind in the many hours of frustration which I have encountered. None of the above have worked, even temporarily.
I have also attempted to connect to a neighbor's unsecured wireless network, however I was also unsuccessful with that.
I'm using DELL D620 laptop with Win 7 Ultimate OS, and I have trouble connecting to a wireless network, in fact I can connect to a network but I dont have internet access, I'm using TP-LINK (WR 741 ND (Annex B)) router.Does anyone know how to fix this? My boardband connection is working on a PC, and laptop, but I cant make wireless internet access on my laptop...
View 5 Replies View RelatedI've been searching this forum and other resources for days now with no luck. I'm connected to our apartment's wireless network, but about a week ago I found the infamous yellow triangle and "No Internet Access." I was going along fine for about a month and this came out of nowhere've tried every imaginable ipconfig command that has been suggested, including flushdns, ipreset, all the winsock commands, etc. I've tried resetting everything: modem, router, laptop... I've tried enabling/uninstalling my wireless adapter, changed my TCP/IPv4 settings, used trusted DNS settings, the whole 9 yards. I've renamed my computer, deleted the network profile, deleted my computers profile on the router, booted on safe mode, you get the picture.
View 9 Replies View RelatedI have a Dell XPS 8300 (running Windows 7 Home Premium) that has lost Internet access. It was fine until yesterday. It shows that it's connected to my home wireless network, but cannot acces the Internet. All our other computers (desktops, laptops & iPad - all running different OS) are able to connect.
I checked the network card, using the Windows Device Manager, and it shows that it is "working properly" and that there are no conflicting devices. What should I do next?
M wireless is flaky to say the least. Realtek 8185 adapter connects sometimes to the interwnt but is painfully slow. Drops connection all the time. My network name changes intermittently between "xxxxxx" and "xxxxxx 2", my network switches between home and public.
View 2 Replies View RelatedCan't delete Norton's, when trying to uninstall I get a blank Norton's window.Thinking it could be related to Norton's.
View 3 Replies View RelatedI am having a confusing time trying to figure out why my internet went from 10+ Mbps down to <1 Mbps after simply downloading a wireless card driver.From the beginning: My wireless download speed was 10+Mbps, and I was using the Dell Wireless 1505 Draft 802.11n WLAN Mini-Card. This information is found in the Device Manager, under "Network".The driver for the card was 5.30.x.y (I can't remember the specific version number, but I do remember it was 5.30.something.something). Upon navigating to the Dell webpage, I wanted to see if there were any drivers for the same wireless card that were more updated, to perhaps increase performance.I navigated to the page for my computer (Dell Latitude D830), here. That page is for my model laptop. You'll notice that, in the drop down for "Operating System", there is no option to select Windows 7.Regardless, I navigated to the driver under "Network", the Dell Wireless 1505 Draft 802.11n WLAN Mini-Card, and downloaded it. It was version 5.60.188.1, from 11/9/2009. This is where my problem began. After installing the driver and rebooting, my internet speed instantly went to below 1 Mbps. I have no clue why installing a later wireless card driver would mess up my speed.
My only hypothesis is that the driver I downloaded is only compatible with Vista. Do I just re-download driver version 5.30.x.y or something to get it back? Why did it get so slow? How do I get my computer back to the download speed it was/should be?
For the last 3 months my internet keeps dropping in and out, sometimes for a long period of time. But it always shows full bars in the wireless network connection on our computers. I have been on the phone to the internet company for hours and hours (each time speaking to a different person-so no help there) and they can't figure out what is wrong.
They sent me a new modem which worked for 10 mintues and then was dropping in and out again. The same issue is happening on my roommate's computer too, and I am able to access other wireless networks in other locations too with no trouble. So not an issue with our computers.
I have recently been having difficulties with connecting with my wireless connection. We have a in-home router that is connected to two computer's downstairs by cable. I however own a Acer, Windows 7 laptop that I mainly use upstairs and I get a Excellent signal strength.I have connected to my Home wireless connection before with no problem but recently the connection keeps coming up as ~Identifying... No Internet Access.Also when I have had connection to this network prior to this problem the connection is under Home. But when I try to connect to the same network it comes up as Public or just keeps Identifying. I have the connection set to Connect Automatically.Also the yellow triangle with the exclamation point almost always pops up immediately when I reboot my system or after I Disconnect and Connect the network again. I have tried Disabling and Enabling the network in the adapter settings and this does not work either. In the manage wireless networks tab, I have repeatedly deleted the connection and reentered the security password and again put it as automatically connect but it still comes up as Identifying. I have seen many people with this same problem and have tried many of the suggestions to no avail.It is rather bizarre because my connection will be in this Identifying state for a while and randomly connect properly and I have no idea what makes it go off and on so erratically. I just had it working again for a few days and it is again acting up.
View 4 Replies View Relatedhow to configure my wireless router WNR500 to my existing wireless network
View 1 Replies View RelatedI have a Dell Inspiron N5110, Intel core 3 processor, and Windows 7 ultimate 64 bit os. I have recently reinstalled windows 7 from the windows 8 os. I can't access my wireless internet, I can only get to the internet via hard wire. I have searched Dell and Intel for the network controller driver and the sm bus controller driver, but to no avail.
View 3 Replies View RelatedAm using dell inspiron laptop with windows 7 home premium 64 bit , i have a free wifi in our collage when i give connect it was getting connected but there is no internet access i had tried with trouble shoot it was giving problem regarding DNS
View 2 Replies View RelatedA few days ago the public wireless internet i used worked fine and i had no problems with my computer. Now when i try to connect to it, it isn't allowing me access. It works just fine on my sisters laptop that is the same model and brand as mine.
View 1 Replies View Relatedhow come can't get signal internet in my houese althogh have a wifi in theh building my computer is dell kind? what need to do or something.
View 3 Replies View RelatedMy rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies View RelatedRecently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
View 2 Replies View Related