I recently added a fairly old PCI card to my 8800 PCIe Card running on windows 7 on a gigabyte GA 965P S3 and cannot get three screens working together...
With the BIOS set to use PCI first,
Windows boots on the PCI Card, The other two screens do not come on, Both cards are visible in device manager, only one card is shown in the Screen Resolution options.
With the BIOS set to use PEG first,
Windows boots on the 8800, two screens on, pci card off, pci card NOT visible in device manager, pci card not shown in the screen resolution options...
There doesnt appear to be any other bios settings to do with the screens.... im at a bit of a loss as to what to try next...
I would consider buying a PCIe x1 card to work along side the PCIe x16 card, will this not work for any other reason??
So, I am trying to get triple monitors set up on my computer, and for some reason windows 7 isn't seeing the third monitor. [code] This Motherboard has a monitor output, as well as a video card port. The video card has two monitor outputs, one HDMI and one VGA. The Video card is an NVIDIA GeForce FX 5500.I have tested all three monitors and they all work. It seems that the only port that isn't being recognized is the one in the motherboard. (Dual monitors work fine through the video card)how to get windows to recognize that I have a third monitor plugged into the motherboard?
so I bought a new computer recently that came stock with a GTS 250 videocard, and was looking to add another video card for triple monitor display. my only options for expansion are PCI and PCIe x1. what videocards are compatible/would work with this setup?
Are there any tricks to running games well on a three monitor setup?
I only have 2 x16 slots running dual evga 275 gtx oc on a tyan s2915 motherboard with 16 gb ram, dual quad core 2356s,raid x-25m ssds and three 24 in monitors under windows 7U 64. This is loads better than vista 64 (I can't even talk about it) but it still chokes when the action gets heavy. Obviously this computer is used for manuscript creation-writing model analysis by day but I like to have a little fun at night. Hence I would like to tweak what I can without going to two monitors (can't stand the line in the middle) or going to a new MB.
I'm planning on taking advantage of the price cuts announced today and would like to run W7 home Premium. I am currently triple booting with partitions for XP, W7-RC, and Linux. Would installing an upgrade version of W7 overwrite or otherwise disable the XP system, or would I need to purchase a 'full' version? I want to be able to keep that as is for the other member of the household.
I never setup a triple-boot system before. I kind of have an idea of how I'm going to attempt this little project but wanted to see what you guys thought. I have a 320GB asus laptop and plan on using Gparted live cd to do all my partitioning. I plan to create 2 NTFS partitions and then create an EXT3 partition plus a swap partition..
I installed Win 7 on a triple boot with Vista and Linux and meant to keep Linux and Win 7, expecting Vista to be overwritten. Unforeseen Vista remained installed.
Using a special boot cdrom, I get entries for all 3 OS, but Vista boots into my Lenovo laptop's rescue software and proposes to "rescue" the Vista and I can't get passed that. I expect it means deleting the other OS?
I imagine I could uninstall Vista in some way placed in the folder Windows_Old or maybe being able to boot it, as I would be able to get some registration keys off software as well as using some software that doesn't work on Windows 7. How can I now uninstall Vista safely?
I expect a partition manager like in Linux could recover the partitions for new data.
I have four SATA II drives, four gig memory, etc, in my machine that have Windows XP and Vista dual-booting. Both OS's are installed on the same physical drives; about 150 gig each partition.
I've freed up one of the drives, changed the BIOS to boot from the DVD, and installed Windows 7, 64-bit. The installation completed without a hitch and the setup detected everything, sans the Viewsonic monitor. Windows did have a driver for the monitor, but I used the one for Vista 64-bit from Viewsonic and we are good.
After rebooting Windows 7, I expected to have couple of boot option but there's none. No XP and/or Vista, just Windows 7. I've tried to locate the bootmanager in Windows 7, but I couldn't find it and that worried me. There was no backup made since it should've picked up the other OS's.
I didn't touch any of the bootsectors, nor did Windows 7; the latter one did make the drive a primary disk and installed the boot record there. After modifying the BIOS, making the the XP/Vista drive the first drive to be booted, XP and Vista came back, but Windows 7 disappeared. I can boot either OS's by changing the order the drives are booted by the BIOS, but I rather have the choice for XP/Vista/7 in the boot menu.
I am not sure why Windows 7 didn't pick up on the other OS's; the reason could be the SATA drives, if I'd have to guess. Since "disk 1" was set as the first drive to boot by the BIOS, Windows 7 did not check other drives and declared itself the only OS.
The question is, how do I add Windows 7 to the Vista's boot menu, or alternatively, how do I add XP/Vista to 7's boot menu?
i'm try to make my laptop triple boot.i've installed windows 7 and xp, now i created a partition for vista but it became LOGICAL instead of PRIMARY so when i enter the vista setup i try to install it to the LOGICAL drive but of course it won't install.so i go to windows 7 and try to install it from the OS but it says that i don't have enough storage in my temp folder, i mean common..?!it probably goes by default to the first volume wich is SYSTEM PRESERVED and has only 100MB.
When I say at "double or triple speed" I do not mean make it run smoother, as in it's lagging.I have a program that does tasks, it waits about 20-30 seconds between tasks (I can't change that, I want to shorten the time it takes, so I want to change the speed of the whole program.I haven't found anything like that, all I get is how to stop lag on your computer, since it's referred to as 'running your computer faster'.
Let me get right to the point (details to follow). I want to be able to triple boot Windows 7, Mac OS X and Ubuntu and I don't know how or if it is even possible. For the past few weeks I have been looking for a guide on how to triple boot using Windows 7, OS X and Ubuntu. However, I have not been able to find a guide that pertains to my situation; my situation is that I have Windows 7 already installed which I am currently using and now I want to install and use OS X and Ubuntu in a triple boot configuration. The guides that I have seen so far have OS X as the starting operating system and go on to show how to install Windows 7 then Ubuntu, or the guides force me to repartition the drive with my Windows 7 installation and start all over, or the guides only show me how to install all three operating systems on a single drive with three partitions. Ideally here is what I would like...1. Keep my original Windows 7 installation intact. I have quite a few programs installed and would very much enjoy not having to set up everything again.2. Have each operating system (Windows 7, Mac OS X, and Ubuntu) on their own hard drive. Or at the very least have OS X and Ubuntu on a single drive, each with their own partition3. Be able to triple boot and select the operating system I wish to use.
I have done this before for myself without any problems and while bragging to my friend I was roped into setting up his computer with a third monitor. As the system is not mine I am trying to keep costs low and avoid buying anything. In short. I am trying to run three monitors, 2 through a ATI4600 series and 1 through an el-cheapo ATI Radeon 9250 256MB, however when both cards a plugged into the mobo the second (el-cheapo) will not run displaying a cannot start message.
Recently I had a drive failure and I need to have an extra Windows 7 x32. The remaining drive a WD 320gb drive has a dual-boot Windows 7 and XP. How can I triple boot in just one hard drive?
On that particular system I am using Neosmart's iReboot/EasyBCD so when I want to boot to either of the former arrangment I can do that easily and not be bothered by the boot selection.
Now I am using ATI Home 2011 and I was planning to make recover an image from the drive that failed to a 3rd partition on the WD320gb drive. I really need to get this one going in the meantime I do not have the money to buy a new one.
I have 3 monitors set up technically although one is my 54'' TV to play movies on while I work and play. Ultimately what I would like to do is while I'm playing movies and not using the other monitors (such as laying down to take a nap or playing movies with friends) I want to have a screensaver display on the unused monitors. I'm not sure if this is actually possible with a movie up on the TV but if anyone has any idea of a program i could use
I'm also running windows 7 ultimate if that matters any to you...
It may be because there are 3 DVI ports on the one card but Win 7 does not recognise all 3 monitors, only 2.
On the contrary the Nvidia control panel recognises all 3 monitors and I am able to configure all 3 screens with a res of 5760 / 1080. All is fine until I reboot and then nothing. All monitors blank. I can only assume that it's because of a conflict with the Nvidia driver (latest) and windows.
My question is, is it possible to force windows to recognise all 3 monitors?
ASUS SKT-1366 P6T Deluxe V2 Windows 7 64 bit i7 975 Extreme OC to 4.2GHZ 6gb of 1866mhz Dominator DDR3 1TB Samsung F1 SATA II Nvidia GeForce 590 GTX Acer 3D 27 inch X 3 3D Vision Surround.
I currently have a 64 bit version of Windows 7 and Ubuntu 11.04 64 bit installed but I want to try out the beta release of Windows 8 Milestone 3 Build 7989 that is floating around.
I am dual booting with windows 7 and ubuntu linux. I recently found an xp install disk and decided I want to try it out. I heard I will need to migrate SATA drivers or something?
I have a ASUS G72 with Intel Core 2 Duo P8700 2.53 GHz.I have one HDD and 4 partitions in it(c is windows 7 home premium x64, d is windows 7 ultimate x64, e is empty and i am planning to install snow leopard on e and f is just my important files.).my dvd writer seems to be only compatible with dvd + r dl.i have a 8 gb microsd (SD) card.as i said, i want to install snow leopard on e: and i want to have triple boot (windows 7 home premium x64, windows 7 ultimate x64 and snow leopard).simply, just with a windows pc (notebook that is), how can i install snow leopard by the 8 gb SD or by dvd + r dl and how can i make a triple boot?
Note: Snow Leopard Installation DVD is 6 GB so it requires a DL DVD if being installed from DVD, the thing is -for some reason- people are advising DVD - R DL.
As of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
Replaced my VGA cable with and HDMI cable because screen wouldn't leave power save mode due to lack of communication between tower and screen. HDMI solves that. Now I have no internet connection. No signs of life. Cable guy comes over plugs his laptop into the..box thing where the internet comes from... says the internet is working fine must be your computer and he leaves. So now that my screen is working I can trouble shoot - can't find a network adapter. I have no idea what that means, and it is not listed anywhere on my control panel list of drivers and things. Tried to reinstall whatever that is.. which is hard when your just guessing and clicking things. Bottom line is after using the drivers and devices disc and reinstalling everything that said "network" in the title there is still no signs of life. I don't have wireless so the whole adapter thing isn't making sense either.
one day it suddenly crashed while i was watching a movie. it displayed random patterns on screen. kinda like part of the image from the video is on the screen then a black strip and random colors. I restarted the unit to safe mode and left it on and browsed the net and downloaded some big files for how many hours and nothing happened.. there are also times when windows is still loading with the windows logo on screen, it crashes. there are also times when the login screen is displayed and it crashes. it just crashes randomly! so i tried to reformat it. i deleted the partitions and created a new one, formatted it then fresh installed windows 7 ( my previous OS is windows 7 by the way) and started installing the basic drivers and after a few hours, it crashed again...thinking that the driver installed might not be compatible, i tried another fresh install of windows (same execution, delete partition, create, install OS) and this time, without installing the drivers, it crashed again after a few hours... sometimes it crashes immediately after turning it on from cold start!
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
My computer has a problem with crashing while playing a video in full screen. When it crashes the screen turns black while the speakers give out a buzzing noise. Everything is unresposive the only solution is to turn it off with the power button. It happens in any full screen video online or offline and even visualizations from windows media player and iTunes, but only in full screen. I don't think it's overheating either because sometimes it takes 30 mins to crash and other times it will crash immediately when put in full screen. *I've tried setting it back to factory settings thus reinstalling windows. *All the directx features are working with no reported problem there.* I don't think it's a memory issue in the computer, as my specs are:
Windows 7 64-bit Processor: intel core i5 3.20 GHz Ram: 8 GB Graphics card: NVIDIA GeForce GT 220 Graphics card memory: 0.5 GB Any other ideas?
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
Okay so lately I've noticed that my PC isn't displaying the BIOS splash screen anymore and skips straight to the Windows login screen.It didn't really bother me until today when I wanted to boot into Ubuntu and I couldn't select which OS I wanted to use.I'm pretty sure the problem isn't the BIOS itself since I unplugged all the peripherals except the speakers, removed all the RAM and the BIOS did beep repeatedly. And given enough time, I can boot into windows (and only windows ).Apparently people have had this problem before and all the solutions I've read such as "Press 'del' to go into your BIOS!" really doesn't help since I can't see anything in my BIOS menu.The only solution that made sense to me was that my CMOS battery could be dying. I haven't changed my rig since I built it in 2009. The only significant event that happened recently might be that Windows updated itself.
-PC doesn't display BIOS splash screen -Can't see messages displayed by system -When windows does bootup, everything runs just fine -Haven't changed rig for ~3 years
