Getting Triple Monitors To Work
Feb 5, 2011
So, I am trying to get triple monitors set up on my computer, and for some reason windows 7 isn't seeing the third monitor. [code] This Motherboard has a monitor output, as well as a video card port. The video card has two monitor outputs, one HDMI and one VGA. The Video card is an NVIDIA GeForce FX 5500.I have tested all three monitors and they all work. It seems that the only port that isn't being recognized is the one in the motherboard. (Dual monitors work fine through the video card)how to get windows to recognize that I have a third monitor plugged into the motherboard?
View 8 Replies
ADVERTISEMENT
Feb 26, 2012
I have done this before for myself without any problems and while bragging to my friend I was roped into setting up his computer with a third monitor. As the system is not mine I am trying to keep costs low and avoid buying anything. In short. I am trying to run three monitors, 2 through a ATI4600 series and 1 through an el-cheapo ATI Radeon 9250 256MB, however when both cards a plugged into the mobo the second (el-cheapo) will not run displaying a cannot start message.
View 2 Replies
View Related
Oct 28, 2012
I have 3 monitors set up technically although one is my 54'' TV to play movies on while I work and play. Ultimately what I would like to do is while I'm playing movies and not using the other monitors (such as laying down to take a nap or playing movies with friends) I want to have a screensaver display on the unused monitors. I'm not sure if this is actually possible with a movie up on the TV but if anyone has any idea of a program i could use
I'm also running windows 7 ultimate if that matters any to you...
View 5 Replies
View Related
Dec 28, 2009
I came home from work today and both my monitors were completely black even though computer was up and running. Browsing through my iphone I noticed that dual monitors were a possibility. So I unplugged one and restarted with success.
I then proceeded to update my video drivers (I have a nvidia 6800) but the problem persists.
Any ideas??
View 9 Replies
View Related
Feb 20, 2012
setting up a brand new computer. had dual monitors before. go to add the second monitor and the computer will not even recognize it is there.
View 5 Replies
View Related
Jan 5, 2010
1. Is there a way i can make a single wallpaper be stretched across both monitors (not just the image twice)
2. Is there a way to stretch the taskbar across both displays?
View 9 Replies
View Related
Nov 4, 2009
Can i make a triple boot XP/Vista/7 on a Virtual Machine ?
(Split up into 30GB partitions each)
View 4 Replies
View Related
Sep 25, 2010
so I bought a new computer recently that came stock with a GTS 250 videocard, and was looking to add another video card for triple monitor display. my only options for expansion are PCI and PCIe x1. what videocards are compatible/would work with this setup?
View 9 Replies
View Related
Jun 2, 2009
im running build 7100 and after hearing that windows 7 supported heterogeneous graphics cards i was excited to try it out.
ive tried but i can't seem to get it working.
i am using a 8800GT PCIe and a FX5200 PCI.
my first question is, is it not working cos the fx5200 is too old?
View 6 Replies
View Related
Nov 19, 2009
I recently added a fairly old PCI card to my 8800 PCIe Card running on windows 7 on a gigabyte GA 965P S3 and cannot get three screens working together...
With the BIOS set to use PCI first,
Windows boots on the PCI Card, The other two screens do not come on, Both cards are visible in device manager, only one card is shown in the Screen Resolution options.
With the BIOS set to use PEG first,
Windows boots on the 8800, two screens on, pci card off, pci card NOT visible in device manager, pci card not shown in the screen resolution options...
There doesnt appear to be any other bios settings to do with the screens.... im at a bit of a loss as to what to try next...
I would consider buying a PCIe x1 card to work along side the PCIe x16 card, will this not work for any other reason??
Any ideas anyone?
View 9 Replies
View Related
Nov 16, 2009
Are there any tricks to running games well on a three monitor setup?
I only have 2 x16 slots running dual evga 275 gtx oc on a tyan s2915 motherboard with 16 gb ram, dual quad core 2356s,raid x-25m ssds and three 24 in monitors under windows 7U 64. This is loads better than vista 64 (I can't even talk about it) but it still chokes when the action gets heavy. Obviously this computer is used for manuscript creation-writing model analysis by day but I like to have a little fun at night. Hence I would like to tweak what I can without going to two monitors (can't stand the line in the middle) or going to a new MB.
View 3 Replies
View Related
Jun 25, 2009
I'm planning on taking advantage of the price cuts announced today and would like to run W7 home Premium. I am currently triple booting with partitions for XP, W7-RC, and Linux. Would installing an upgrade version of W7 overwrite or otherwise disable the XP system, or would I need to purchase a 'full' version? I want to be able to keep that as is for the other member of the household.
View 3 Replies
View Related
Apr 11, 2011
I never setup a triple-boot system before. I kind of have an idea of how I'm going to attempt this little project but wanted to see what you guys thought. I have a 320GB asus laptop and plan on using Gparted live cd to do all my partitioning. I plan to create 2 NTFS partitions and then create an EXT3 partition plus a swap partition..
View -1 Replies
View Related
Oct 25, 2009
I installed Win 7 on a triple boot with Vista and Linux and meant to keep Linux and Win 7, expecting Vista to be overwritten. Unforeseen Vista remained installed.
Using a special boot cdrom, I get entries for all 3 OS, but Vista boots into my Lenovo laptop's rescue software and proposes to "rescue" the Vista and I can't get passed that. I expect it means deleting the other OS?
I imagine I could uninstall Vista in some way placed in the folder Windows_Old or maybe being able to boot it, as I would be able to get some registration keys off software as well as using some software that doesn't work on Windows 7. How can I now uninstall Vista safely?
I expect a partition manager like in Linux could recover the partitions for new data.
Does anyone have some comments on this?
View 8 Replies
View Related
May 10, 2009
I have four SATA II drives, four gig memory, etc, in my machine that have Windows XP and Vista dual-booting. Both OS's are installed on the same physical drives; about 150 gig each partition.
I've freed up one of the drives, changed the BIOS to boot from the DVD, and installed Windows 7, 64-bit. The installation completed without a hitch and the setup detected everything, sans the Viewsonic monitor. Windows did have a driver for the monitor, but I used the one for Vista 64-bit from Viewsonic and we are good.
After rebooting Windows 7, I expected to have couple of boot option but there's none. No XP and/or Vista, just Windows 7. I've tried to locate the bootmanager in Windows 7, but I couldn't find it and that worried me. There was no backup made since it should've picked up the other OS's.
I didn't touch any of the bootsectors, nor did Windows 7; the latter one did make the drive a primary disk and installed the boot record there. After modifying the BIOS, making the the XP/Vista drive the first drive to be booted, XP and Vista came back, but Windows 7 disappeared. I can boot either OS's by changing the order the drives are booted by the BIOS, but I rather have the choice for XP/Vista/7 in the boot menu.
I am not sure why Windows 7 didn't pick up on the other OS's; the reason could be the SATA drives, if I'd have to guess. Since "disk 1" was set as the first drive to boot by the BIOS, Windows 7 did not check other drives and declared itself the only OS.
The question is, how do I add Windows 7 to the Vista's boot menu, or alternatively, how do I add XP/Vista to 7's boot menu?
View 9 Replies
View Related
Jul 11, 2010
i'm try to make my laptop triple boot.i've installed windows 7 and xp, now i created a partition for vista but it became LOGICAL instead of PRIMARY so when i enter the vista setup i try to install it to the LOGICAL drive but of course it won't install.so i go to windows 7 and try to install it from the OS but it says that i don't have enough storage in my temp folder, i mean common..?!it probably goes by default to the first volume wich is SYSTEM PRESERVED and has only 100MB.
View 9 Replies
View Related
Feb 7, 2013
When I say at "double or triple speed" I do not mean make it run smoother, as in it's lagging.I have a program that does tasks, it waits about 20-30 seconds between tasks (I can't change that, I want to shorten the time it takes, so I want to change the speed of the whole program.I haven't found anything like that, all I get is how to stop lag on your computer, since it's referred to as
'running your computer faster'.
View 9 Replies
View Related
Jun 26, 2012
Let me get right to the point (details to follow). I want to be able to triple boot Windows 7, Mac OS X and Ubuntu and I don't know how or if it is even possible. For the past few weeks I have been looking for a guide on how to triple boot using Windows 7, OS X and Ubuntu. However, I have not been able to find a guide that pertains to my situation; my situation is that I have Windows 7 already installed which I am currently using and now I want to install and use OS X and Ubuntu in a triple boot configuration. The guides that I have seen so far have OS X as the starting operating system and go on to show how to install Windows 7 then Ubuntu, or the guides force me to repartition the drive with my Windows 7 installation and start all over, or the guides only show me how to install all three operating systems on a single drive with three partitions. Ideally here is what I would like...1. Keep my original Windows 7 installation intact. I have quite a few programs installed and would very much enjoy not having to set up everything again.2. Have each operating system (Windows 7, Mac OS X, and Ubuntu) on their own hard drive. Or at the very least have OS X and Ubuntu on a single drive, each with their own partition3. Be able to triple boot and select the operating system I wish to use.
View 3 Replies
View Related
Mar 22, 2012
Recently I had a drive failure and I need to have an extra Windows 7 x32. The remaining drive a WD 320gb drive has a dual-boot Windows 7 and XP. How can I triple boot in just one hard drive?
On that particular system I am using Neosmart's iReboot/EasyBCD so when I want to boot to either of the former arrangment I can do that easily and not be bothered by the boot selection.
Now I am using ATI Home 2011 and I was planning to make recover an image from the drive that failed to a 3rd partition on the WD320gb drive. I really need to get this one going in the meantime I do not have the money to buy a new one.
View 9 Replies
View Related
Dec 1, 2011
It may be because there are 3 DVI ports on the one card but Win 7 does not recognise all 3 monitors, only 2.
On the contrary the Nvidia control panel recognises all 3 monitors and I am able to configure all 3 screens with a res of 5760 / 1080. All is fine until I reboot and then nothing. All monitors blank. I can only assume that it's because of a conflict with the Nvidia driver (latest) and windows.
My question is, is it possible to force windows to recognise all 3 monitors?
ASUS SKT-1366 P6T Deluxe V2
Windows 7 64 bit
i7 975 Extreme OC to 4.2GHZ
6gb of 1866mhz Dominator DDR3
1TB Samsung F1 SATA II
Nvidia GeForce 590 GTX
Acer 3D 27 inch X 3
3D Vision Surround.
View 2 Replies
View Related
Aug 18, 2011
I currently have a 64 bit version of Windows 7 and Ubuntu 11.04 64 bit installed but I want to try out the beta release of Windows 8 Milestone 3 Build 7989 that is floating around.
View 7 Replies
View Related
May 13, 2012
I am dual booting with windows 7 and ubuntu linux. I recently found an xp install disk and decided I want to try it out. I heard I will need to migrate SATA drivers or something?
View 1 Replies
View Related
Jun 30, 2010
I have a ASUS G72 with Intel Core 2 Duo P8700 2.53 GHz.I have one HDD and 4 partitions in it(c is windows 7 home premium x64, d is windows 7 ultimate x64, e is empty and i am planning to install snow leopard on e and f is just my important files.).my dvd writer seems to be only compatible with dvd + r dl.i have a 8 gb microsd (SD) card.as i said, i want to install snow leopard on e: and i want to have triple boot (windows 7 home premium x64, windows 7 ultimate x64 and snow leopard).simply, just with a windows pc (notebook that is), how can i install snow leopard by the 8 gb SD or by dvd + r dl and how can i make a triple boot?
Note: Snow Leopard Installation DVD is 6 GB so it requires a DL DVD if being installed from DVD, the thing is -for some reason- people are advising DVD - R DL.
View 1 Replies
View Related
Apr 11, 2011
I've got a setup that is running 2 ATI 5850s with dual monitors. I tried to add a 3rd monitor but when I do, I get the error message "to extend the desktop, a desktop or display must be disabled". Basically it's only letting me run 2 at a time, any 2 works.I've got 2 monitors using the DVI??? (whatever the white port is) and one using HDMI. I have tried running all 3 from one card, and I've tried doing various combinations using both cards and I can only get 2 monitors to run.
View 6 Replies
View Related
Jun 23, 2012
I have Gtx 460 and gtx 670 currently and I have two monitors i wanna hook up to each of those. (25" and a 19") I tried installing the 2nd one but nothing happened and it wasn't being recognized. how do i set up the two monitors and is it possible. Edit i solved the other problem. I when the gtx 460 was recognized both of them stopped working so i had to disable it. how do i make it so they are both enabled and work with each other?
View 6 Replies
View Related
Dec 9, 2009
I'm thinking of having 3 monitors. Right now I have two, and my setup is so that the desktop scales across both so I can just drag a window from one screen to another.
If I put in a second video card and setup a 3rd monitor, will it scale on over one more time? I'm not sure how to set that up since I've never seen it in person before.
Any ideas on how that would work? I currently have an 8800GT that's got the two hooked into it, and I'm planning on getting some other cheap nVidia card just for the 3rd monitor. I just want to make sure it will scale on across to the 3rd monitor as well.
View 3 Replies
View Related
Apr 14, 2009
Has anyone here had experience with 3D monitors? I've just seen on Engadget that JVC are launching a 46" 3D HDTV for around $7,000.
I'm really excited for when true 3D content really takes off
I started a PhD on autostereoscopic monitors just a couple of years ago, which is a type of 3D display that doesn't need any glasses to view 3D images (but has some drawbacks compared to polarised displays, like the JVC one above).
Most nVidia graphics cards are capable of displaying many existing 3D games on a 3D monitor/TV without much extra configuration. So you could be playing Flight Sim, Team Fortress or other 3D games quite easily in true 3D
Admitedly, it's more novel than useful for many games - but flight sim is amazing in 3D. I'd love to have a setup like this in my living room!
View 2 Replies
View Related
Apr 7, 2012
This problem started a few months ago when I updated the video drivers on my NVIDIA card. What happens is that when the pc goes to sleep, either by my command or after timing out for inactivity, the pc will wake up when prompted by mouse or keyboard, but the monitors don't. I know the pc wakes because when tapping on keys or clicking the mouse button I will occasionally hear pings from the pc. I'm not convinced that the problem is NVIDIA's, but this does coincide with an updated driver of theirs.Ultimately, in order to get my machine working again I have to press the power button and restart cold. Also, and I'm not sure if this is worth noting, upon cold start, my Kaspersky and clock gadgets, which are normally placed in the upper-right corner of the right monitor, display in the left monitor somewhere off-center.
I'm diligent with keeping drivers updated, but I really have no idea what to do now. I'll post the stuff that may be relevant:Logitech wireless mouse M310 (unified w/ keyboard)Logitech wireless Solar keyboard K750 (unified w/ mouse)(2) LG monitors E2050NVIDIA GeForce GTX 460 video cardWindows 7 Home Premium (service pack 1)64-bit OSAMD Phenom II x4 945 processor 3.00 GHz8.00 GB ram
View 9 Replies
View Related
Nov 24, 2009
I am using two monitors on my system at work, and for some reason my "Monitor 2" goes blank when "Monitor 1" is showing the screensaver in action.
Is there any way to have the screensaver on both monitors simultaneously.
View 8 Replies
View Related
Mar 27, 2009
Are there any decent Monitoring gadgets for measuring Core / gpu / HDD Temps out there, as I can not seem to find any?
I have been overclocking so need to monitor my temps for at least the next few weeks and a gadget would be handy, instead of speed fan etc, etc
View 9 Replies
View Related
Oct 7, 2012
Can get two taskbars for two monitors
View 3 Replies
View Related
