I installed Win 7 on a triple boot with Vista and Linux and meant to keep Linux and Win 7, expecting Vista to be overwritten. Unforeseen Vista remained installed.
Using a special boot cdrom, I get entries for all 3 OS, but Vista boots into my Lenovo laptop's rescue software and proposes to "rescue" the Vista and I can't get passed that. I expect it means deleting the other OS?
I imagine I could uninstall Vista in some way placed in the folder Windows_Old or maybe being able to boot it, as I would be able to get some registration keys off software as well as using some software that doesn't work on Windows 7. How can I now uninstall Vista safely?
I expect a partition manager like in Linux could recover the partitions for new data.
I have four SATA II drives, four gig memory, etc, in my machine that have Windows XP and Vista dual-booting. Both OS's are installed on the same physical drives; about 150 gig each partition.
I've freed up one of the drives, changed the BIOS to boot from the DVD, and installed Windows 7, 64-bit. The installation completed without a hitch and the setup detected everything, sans the Viewsonic monitor. Windows did have a driver for the monitor, but I used the one for Vista 64-bit from Viewsonic and we are good.
After rebooting Windows 7, I expected to have couple of boot option but there's none. No XP and/or Vista, just Windows 7. I've tried to locate the bootmanager in Windows 7, but I couldn't find it and that worried me. There was no backup made since it should've picked up the other OS's.
I didn't touch any of the bootsectors, nor did Windows 7; the latter one did make the drive a primary disk and installed the boot record there. After modifying the BIOS, making the the XP/Vista drive the first drive to be booted, XP and Vista came back, but Windows 7 disappeared. I can boot either OS's by changing the order the drives are booted by the BIOS, but I rather have the choice for XP/Vista/7 in the boot menu.
I am not sure why Windows 7 didn't pick up on the other OS's; the reason could be the SATA drives, if I'd have to guess. Since "disk 1" was set as the first drive to boot by the BIOS, Windows 7 did not check other drives and declared itself the only OS.
The question is, how do I add Windows 7 to the Vista's boot menu, or alternatively, how do I add XP/Vista to 7's boot menu?
i'm try to make my laptop triple boot.i've installed windows 7 and xp, now i created a partition for vista but it became LOGICAL instead of PRIMARY so when i enter the vista setup i try to install it to the LOGICAL drive but of course it won't install.so i go to windows 7 and try to install it from the OS but it says that i don't have enough storage in my temp folder, i mean common..?!it probably goes by default to the first volume wich is SYSTEM PRESERVED and has only 100MB.
Let me get right to the point (details to follow). I want to be able to triple boot Windows 7, Mac OS X and Ubuntu and I don't know how or if it is even possible. For the past few weeks I have been looking for a guide on how to triple boot using Windows 7, OS X and Ubuntu. However, I have not been able to find a guide that pertains to my situation; my situation is that I have Windows 7 already installed which I am currently using and now I want to install and use OS X and Ubuntu in a triple boot configuration. The guides that I have seen so far have OS X as the starting operating system and go on to show how to install Windows 7 then Ubuntu, or the guides force me to repartition the drive with my Windows 7 installation and start all over, or the guides only show me how to install all three operating systems on a single drive with three partitions. Ideally here is what I would like...1. Keep my original Windows 7 installation intact. I have quite a few programs installed and would very much enjoy not having to set up everything again.2. Have each operating system (Windows 7, Mac OS X, and Ubuntu) on their own hard drive. Or at the very least have OS X and Ubuntu on a single drive, each with their own partition3. Be able to triple boot and select the operating system I wish to use.
Recently I had a drive failure and I need to have an extra Windows 7 x32. The remaining drive a WD 320gb drive has a dual-boot Windows 7 and XP. How can I triple boot in just one hard drive?
On that particular system I am using Neosmart's iReboot/EasyBCD so when I want to boot to either of the former arrangment I can do that easily and not be bothered by the boot selection.
Now I am using ATI Home 2011 and I was planning to make recover an image from the drive that failed to a 3rd partition on the WD320gb drive. I really need to get this one going in the meantime I do not have the money to buy a new one.
I had windows 7 originally Installed on my Laptop. I then Installed Ubuntu 9.10 Desktop version, and it installed the grub boot loader
(All on 1 single HD, each OS is on its own partition.)
This boot loader was used to dual boot between windows and Linux. However now the grub boot loader is broken, and I was talking to some people how knew about Ubuntu, and they said to just delete its partition, which I did.
Now when I boot from my HD I just get a broken grub boot loader, and can’t get even get into my Win 7. Now I just want to get ride of this Grub boot loader, and get Windows 7 MBR back. I have booted from my windows 7 recovery disc, and have done:
Startup Repair – It found no problems, but HD still only boots to broken grub boot loader
System Restore – I restored to before I was having this problem, but HD still only boots to broken grub boot loader
I am trying to figure out what commands to enter in the command prompt to repair the MBR, or maybe just view what partitions are in my computer, and then completely delete the one with Grub on it.
Windows Boot Loader Identifier:{default} Device:partition = D: Path:Windowssystem32winload.exe Description:Windows 7 Inherit:{bootsequencesettings] Recoveryenabled: yes Osdevice:partition = D: Systemroot: windows Nx:OptIn
According to this everything looks fine, The C partition is that 100MB system reserved boot partition that windows 7 creates, and the D partition is a 100GB partition that I created on the HardDrive that windows 7 was installed to. I don’t understand why the windows boot loader will not boot, somehow the grub boot loader is still over riding it, even though I deleted the partition that ubuntu was installed on, and where the grub should have been installed as well.
From the command prompt, if I use diskpart, there are only 2 partitions, a 100MB one, and a 100GB one. Those are C and D respectively, so I am not sure how the grub is still loading unless it installed itself to a NTFS partition if that is even possible.
Does anyone know what commands I can try to repair or recreate the MBR so that windows 7 will load, or maybe commands to delete this Grub boot loader?
How do i uninstall any linux distro after successfully installing both windows and linux.i dont want to lose my MBR. [or] will it (Windows) rewrite it again.i am a bit scared to do it myself as i was going to do a secure deletion of the partition.
I currently have a 64 bit version of Windows 7 and Ubuntu 11.04 64 bit installed but I want to try out the beta release of Windows 8 Milestone 3 Build 7989 that is floating around.
I posted here a little less than a week ago asking how to reclaim the free space from the linux partition I deleted. Today I restarted my computer for the first time and it won't recognize win7 on my computer. Was I supposed to do something after I deleted linux? I tried using my win7 cd to see if I could boot like that, but it just wants to reinstall windows, which I would rather not do.
i want to dual boot Linux and windows 7 (whats already installed )
i have 2 hdd one with windows 7 installed on(c drive) and drivers etc . and on my second one i have my media .
so my question is if i make a partition on my c drive and install Linux as well will i still be able to access my media on the second hard disk if i boot Linux or windows 7 .
I would like to learn some linux and for that i need a secondary OS, I want to keep my Internal as my Windows 7 drive and that has boot priority but i want the linux to run from partition 2 (or 1) on an external HDD
I want to install linux along with windows 7 on my Dell studio 15. For this as i have read on the threads that C: drive needs to be shrunk as it is the active partition . And for linux at least 10 GB should be kept as unallocated space . But when i tried to shrink my C: drive then the available space for shrinking is shown to be just 39 MB which is highly insufficient. how to increase this size and install linux on my PC .
My system dual boots to either Windows 7 or Vista Ultimate, or, at least it is supposed to. Something happened and now the system just boots to Winodows 7 without giving me the choice to boot to either. When I use F6 I find that only Windows 7 is listed in the Operating Systems box.
New laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
I have been using Linux Mint, which is based on Ubuntu, since the last time I visited the forums but now I want to dual boot with Windows 7. So, I have just Mint 8 (based on Ubuntu 9.10) installed on my laptop (nothing else), and I if I wanted to dual boot with Windows 7, how would I do it? I know I could use VirtualBox to run Windows 7 but I want to dual-boot.
I've Linux Debian installed at my workstation. We are not allowed to remove it. But I would like to make the system dual-boot. Debian Lenny is already installed, How can I safely install Win7RC along with the Debian without losing any of the files/system/partition etc.
i had two os win 7 and backtrack5 in separate partitions and today i reinstalled win 7 but now it does ask me to choose between the two even i can't see boot screen to choose ,it automaticaly loads win 7 without asking me to choose , i waant see the boot screen with where i can choose which os should be loaded.
I have two drives (C and D) with Vista on one and Win 7 on the other (not sure if they're actual drives or partitions of a single drive, how do I tell?). I am dual booting and never use Vista. Starting to need the disk space and want to delete Vista. Is this difficult in this scenario?
I had recently installed windows 7 on my laptop running windows vista. I did not remove the existing windows vista installation, and thus win 7 was installed in a dual boot combination. Now, i want to remove vista from my laptop and use windows 7 only.The problem is that during installation, win 7 was installed on logical drive and windows vista was on the primary drive. Thus, i cannot delete/format the windows vista partition. Also I cannot transfer the boot drive to the partition containing win 7 because the vista partition is the active one.
I am dual booting with windows 7 and ubuntu linux. I recently found an xp install disk and decided I want to try it out. I heard I will need to migrate SATA drivers or something?
I used MSconfig to set my computer to always boot in safe mode, but booting in safe mode results in a BSOD. Now I have no way of accessing MSconfig to change it back.
I have a puppy linux live cd that I am using to view my windows files, but I don't know what to edit since windows doesn't use a boot.ini file.
I'm using multiple hard drives to install both fedora and Windows 7. I've followed this online tutorial exactly: Dual-booting Fedora 14 and Windows 7 on a computer with 2 hard drives
The problem I seem to be facing is on the "Add a new Entry Step". His secondary OS partition has a drive letter assigned to it and I do not. I've gone into computer management and have tried to assign a drive letter to either of my secondary OS's hard drive partitions and it will not let me.
All I need is the boot loader to link to my second hard drive when the second option (OS) is chosen.
I have dualboot XP SP3 and Vista Ultimate on my system,,and now i want to install Windows 7 over the XP OS. I wish to keep Vista with Windows 7 without reinstalling Vista.
Can I just install Windows 7 over XP , or should i be careful for MBR,or boot....
I have a PC with 2 hard drives- the first hard drive has a single partition and windows 7 64-bit is installed on this hard disk.Now I wish to install CentOS 6 on the first partition of the second hard disk.I have created the dvd for installing Cent OS also.How do I configure the boot loader in Windows? If I install Linux on second hard disk, will this overwrite the Windows Boot Loader? How do I create a dual boot system so that the windows boot loader correctly shows linux as an option, so that I am able to load either Windows 7 (existing) or Linux(on second hard disk- not yet installed)
I set it up so that I could access my E: drive from either the windows or ubuntu operating system. It has worked perfectly so far (about 6 months). But, here is the problem:For some reason as the share drive (my E: drive / sda3) grows Windows thinks that the windows system drive (sda2/c:drive) is also growing. So that now I have a low storage warning stating that there is only 8.76 GB of free space left on my 99 GB C: drive. When, in reality, there should be about 77 GB of free space. I've made hidden files/folders viewable and downloaded treesizefree so I know what should be on the drive. The Treesizefree output shows the expected 22 GB of space but also shows only 9 GB of free space. So, the missing space is nearly exactly the size of my shared drive (sda3/E:drive). So somehow, I think the windows OS is double counting my shared E: drive against my C: drive.
I would like to install Linux Ubuntu on my laptop alongside Windows using dual boot. However, people keep telling me that it is not a good idea this to be done on a laptop because of driver comparability and stuff like that. So is it OK if dual boot Ubuntu and Windows on a laptop or it is a terrible idea?
I'm going to make a clean install of windows 7 and therefor have some question
1)As I want to make a dual boot install with a Linux distribution I thinking about the Partitioning. I want to make following Partitions: [code] Windows 7 also always creates this small 100MB system restore partition. So what would be the best way to prepare these Partions. I would use GParted Live CD to create the Partition in advance, that everything is the way I like it. But I'm not sure if this works without problems for the 100 MB system restore partition (lasts time I got 2 100 MB partitions)
2) I want to move the Users data to a separate partition and found this guides: User Profiles - Create and Move During Windows 7 Installation [2]=User%20Accounts User Folders - Change Default Location(Don't know which one I chose to do so till now) But I see in Windows 7 there are much more useless directories in the users home directory:I've already learned the new Library system, but I still want to use the Users directory. But there is a great mess. Is there a useful/possible way to prevent the directory to mess up with all the sub directories, often created by some apps, don't really using the directory. Or are you just ignore the users home directory? Usually I got about 5 to 8 sub-directories in each Directory for a tidy system to find everything and have a good ordered system.
