When I say at "double or triple speed" I do not mean make it run smoother, as in it's lagging.I have a program that does tasks, it waits about 20-30 seconds between tasks (I can't change that, I want to shorten the time it takes, so I want to change the speed of the whole program.I haven't found anything like that, all I get is how to stop lag on your computer, since it's referred to as
'running your computer faster'.
I seem to have a problem, it keeps happening all the time with my Laptop. 4 times I have reinstalled to get rid of this error, and it has happened a 5th time! I log on and my mouse speed is slow and double click is disabled! I looked around in mouse settings and it doesn't show anything about it...
View 1 Replies View RelatedI'm using Windows 7 Home Premium 64-bit, and I'm using the program Expressit 3.1 to create my CD labels.I downloaded it from here: exPressit SE - Free software downloads and software reviews - CNET Download.comow, the files it creates, of which I have several made using its previous version, 3.0, are suffixed .exp. I have set my Windows 7 installation so that ExpressIt is the default program to open these files. Double-clicking an .exp file should therefore open that CD label in the ExpressIt program.However, when I double-click an .exp file, the ExpressIt program does not open so that I can work with the file. If I run the ExpressIt program first, then 'Open' the file from within the program, it all works fine.(The problem with this 'workaround' is that when going to Open the file, its default directory is nowhere near the directories containing my .exp files and takes ages to browse to, so I don't want to do it like that).
View 6 Replies View Relatedjust wondering is there a known program to adjust mouse acceleration speed in Windows 7?
View 3 Replies View RelatedI just want to be able to increase the speed of my fans beyond their spec, and have complete manual control over their RPMs without a care about the temps. I have a liquid cooling setup and the fans on my radiator as they are right now simply aren't cutting it. I have them hooked up to the motherboard in hopes of finding something to just boost their speed via software, but SpeedFan is the only thing I could find and it simply sucks for that purpose.
View 5 Replies View RelatedCan i make a triple boot XP/Vista/7 on a Virtual Machine ?
(Split up into 30GB partitions each)
So, I am trying to get triple monitors set up on my computer, and for some reason windows 7 isn't seeing the third monitor. [code] This Motherboard has a monitor output, as well as a video card port. The video card has two monitor outputs, one HDMI and one VGA. The Video card is an NVIDIA GeForce FX 5500.I have tested all three monitors and they all work. It seems that the only port that isn't being recognized is the one in the motherboard. (Dual monitors work fine through the video card)how to get windows to recognize that I have a third monitor plugged into the motherboard?
View 8 Replies View Relatedso I bought a new computer recently that came stock with a GTS 250 videocard, and was looking to add another video card for triple monitor display. my only options for expansion are PCI and PCIe x1. what videocards are compatible/would work with this setup?
View 9 Replies View Relatedim running build 7100 and after hearing that windows 7 supported heterogeneous graphics cards i was excited to try it out.
ive tried but i can't seem to get it working.
i am using a 8800GT PCIe and a FX5200 PCI.
my first question is, is it not working cos the fx5200 is too old?
I recently added a fairly old PCI card to my 8800 PCIe Card running on windows 7 on a gigabyte GA 965P S3 and cannot get three screens working together...
With the BIOS set to use PCI first,
Windows boots on the PCI Card, The other two screens do not come on, Both cards are visible in device manager, only one card is shown in the Screen Resolution options.
With the BIOS set to use PEG first,
Windows boots on the 8800, two screens on, pci card off, pci card NOT visible in device manager, pci card not shown in the screen resolution options...
There doesnt appear to be any other bios settings to do with the screens.... im at a bit of a loss as to what to try next...
I would consider buying a PCIe x1 card to work along side the PCIe x16 card, will this not work for any other reason??
Any ideas anyone?
Are there any tricks to running games well on a three monitor setup?
I only have 2 x16 slots running dual evga 275 gtx oc on a tyan s2915 motherboard with 16 gb ram, dual quad core 2356s,raid x-25m ssds and three 24 in monitors under windows 7U 64. This is loads better than vista 64 (I can't even talk about it) but it still chokes when the action gets heavy. Obviously this computer is used for manuscript creation-writing model analysis by day but I like to have a little fun at night. Hence I would like to tweak what I can without going to two monitors (can't stand the line in the middle) or going to a new MB.
I'm planning on taking advantage of the price cuts announced today and would like to run W7 home Premium. I am currently triple booting with partitions for XP, W7-RC, and Linux. Would installing an upgrade version of W7 overwrite or otherwise disable the XP system, or would I need to purchase a 'full' version? I want to be able to keep that as is for the other member of the household.
View 3 Replies View RelatedI never setup a triple-boot system before. I kind of have an idea of how I'm going to attempt this little project but wanted to see what you guys thought. I have a 320GB asus laptop and plan on using Gparted live cd to do all my partitioning. I plan to create 2 NTFS partitions and then create an EXT3 partition plus a swap partition..
View -1 Replies View RelatedI installed Win 7 on a triple boot with Vista and Linux and meant to keep Linux and Win 7, expecting Vista to be overwritten. Unforeseen Vista remained installed.
Using a special boot cdrom, I get entries for all 3 OS, but Vista boots into my Lenovo laptop's rescue software and proposes to "rescue" the Vista and I can't get passed that. I expect it means deleting the other OS?
I imagine I could uninstall Vista in some way placed in the folder Windows_Old or maybe being able to boot it, as I would be able to get some registration keys off software as well as using some software that doesn't work on Windows 7. How can I now uninstall Vista safely?
I expect a partition manager like in Linux could recover the partitions for new data.
Does anyone have some comments on this?
I have four SATA II drives, four gig memory, etc, in my machine that have Windows XP and Vista dual-booting. Both OS's are installed on the same physical drives; about 150 gig each partition.
I've freed up one of the drives, changed the BIOS to boot from the DVD, and installed Windows 7, 64-bit. The installation completed without a hitch and the setup detected everything, sans the Viewsonic monitor. Windows did have a driver for the monitor, but I used the one for Vista 64-bit from Viewsonic and we are good.
After rebooting Windows 7, I expected to have couple of boot option but there's none. No XP and/or Vista, just Windows 7. I've tried to locate the bootmanager in Windows 7, but I couldn't find it and that worried me. There was no backup made since it should've picked up the other OS's.
I didn't touch any of the bootsectors, nor did Windows 7; the latter one did make the drive a primary disk and installed the boot record there. After modifying the BIOS, making the the XP/Vista drive the first drive to be booted, XP and Vista came back, but Windows 7 disappeared. I can boot either OS's by changing the order the drives are booted by the BIOS, but I rather have the choice for XP/Vista/7 in the boot menu.
I am not sure why Windows 7 didn't pick up on the other OS's; the reason could be the SATA drives, if I'd have to guess. Since "disk 1" was set as the first drive to boot by the BIOS, Windows 7 did not check other drives and declared itself the only OS.
The question is, how do I add Windows 7 to the Vista's boot menu, or alternatively, how do I add XP/Vista to 7's boot menu?
i'm try to make my laptop triple boot.i've installed windows 7 and xp, now i created a partition for vista but it became LOGICAL instead of PRIMARY so when i enter the vista setup i try to install it to the LOGICAL drive but of course it won't install.so i go to windows 7 and try to install it from the OS but it says that i don't have enough storage in my temp folder, i mean common..?!it probably goes by default to the first volume wich is SYSTEM PRESERVED and has only 100MB.
View 9 Replies View RelatedLet me get right to the point (details to follow). I want to be able to triple boot Windows 7, Mac OS X and Ubuntu and I don't know how or if it is even possible. For the past few weeks I have been looking for a guide on how to triple boot using Windows 7, OS X and Ubuntu. However, I have not been able to find a guide that pertains to my situation; my situation is that I have Windows 7 already installed which I am currently using and now I want to install and use OS X and Ubuntu in a triple boot configuration. The guides that I have seen so far have OS X as the starting operating system and go on to show how to install Windows 7 then Ubuntu, or the guides force me to repartition the drive with my Windows 7 installation and start all over, or the guides only show me how to install all three operating systems on a single drive with three partitions. Ideally here is what I would like...1. Keep my original Windows 7 installation intact. I have quite a few programs installed and would very much enjoy not having to set up everything again.2. Have each operating system (Windows 7, Mac OS X, and Ubuntu) on their own hard drive. Or at the very least have OS X and Ubuntu on a single drive, each with their own partition3. Be able to triple boot and select the operating system I wish to use.
View 3 Replies View RelatedHow To Speed Up Windows 7 - Speed Tweaks by doing the following:-
Disable indexing
Disable defragmentation
Disable Write Caching
Configure Superfetch
Disable the Page File
Disable System Restore
Disable Hibernation
I have done this before for myself without any problems and while bragging to my friend I was roped into setting up his computer with a third monitor. As the system is not mine I am trying to keep costs low and avoid buying anything. In short. I am trying to run three monitors, 2 through a ATI4600 series and 1 through an el-cheapo ATI Radeon 9250 256MB, however when both cards a plugged into the mobo the second (el-cheapo) will not run displaying a cannot start message.
View 2 Replies View RelatedRecently I had a drive failure and I need to have an extra Windows 7 x32. The remaining drive a WD 320gb drive has a dual-boot Windows 7 and XP. How can I triple boot in just one hard drive?
On that particular system I am using Neosmart's iReboot/EasyBCD so when I want to boot to either of the former arrangment I can do that easily and not be bothered by the boot selection.
Now I am using ATI Home 2011 and I was planning to make recover an image from the drive that failed to a 3rd partition on the WD320gb drive. I really need to get this one going in the meantime I do not have the money to buy a new one.
I have 3 monitors set up technically although one is my 54'' TV to play movies on while I work and play. Ultimately what I would like to do is while I'm playing movies and not using the other monitors (such as laying down to take a nap or playing movies with friends) I want to have a screensaver display on the unused monitors. I'm not sure if this is actually possible with a movie up on the TV but if anyone has any idea of a program i could use
I'm also running windows 7 ultimate if that matters any to you...
It may be because there are 3 DVI ports on the one card but Win 7 does not recognise all 3 monitors, only 2.
On the contrary the Nvidia control panel recognises all 3 monitors and I am able to configure all 3 screens with a res of 5760 / 1080. All is fine until I reboot and then nothing. All monitors blank. I can only assume that it's because of a conflict with the Nvidia driver (latest) and windows.
My question is, is it possible to force windows to recognise all 3 monitors?
ASUS SKT-1366 P6T Deluxe V2
Windows 7 64 bit
i7 975 Extreme OC to 4.2GHZ
6gb of 1866mhz Dominator DDR3
1TB Samsung F1 SATA II
Nvidia GeForce 590 GTX
Acer 3D 27 inch X 3
3D Vision Surround.
For some reason I now keep needing to double-click on everything - in order to execute a single-click.
View 4 Replies View RelatedOk I just noticed that I have 2 yes 2 of the exact same SSID and I have checked my other PC's and the only one that is showing this is my Asus Laptop?I have uploaded a PNG of the SSID's that I see the WNR1000v3 2 is the Duplicate the original is the WNR1000v3,I have the SSID broadcast disabled so I dought anyone could crack it and get past my password.
View -1 Replies View RelatedI just got a new computer in the office, and it uses windows7 (professional edition, placed in domain...)The setting is at single click, and i cannot change it to double click. I even see that the double click option is activated and the single click option is grayed out...I tried the tutorial of the forum (even the registry donwload - Single-Click or Double-Click to Open an Item) but no result.
View 9 Replies View RelatedHas any of you ever experienced this problem before, i set the DVD and bluRay drives to be associated with powerDVD however i have the following issue:Works:- If i insert the DVD/BluRay then powerDVD automatically launches - If i right click on the DVD/BluRay then i can select "Play with powerDVD" DOESNT work.If i try double clicking on the DVD/BluRay drives.If i right click on the drives and press play When i say it doesnt work i mean windows throws up an error saying: "This file does not have an associated program for performing this action. Please install a program.I know for a fact that i HAVE associated the drives with powerDVD yet it still complains If anyone have any idea how i can resolve this i would be very grateful
View 7 Replies View Relatedmy laptop wont let me log in
View 2 Replies View RelatedWhen I start Windows and the welcom screen comes up thee is a flash andit welcome screen shows again. How do I get rid of the scond one or is this just a glitch?
View 1 Replies View RelatedI currently have a 64 bit version of Windows 7 and Ubuntu 11.04 64 bit installed but I want to try out the beta release of Windows 8 Milestone 3 Build 7989 that is floating around.
View 7 Replies View RelatedI have the Microsoft Sidewinder x6 keyboard and have had it for quite a long time now. My problem is that when i want to type fx '^' over an 'e' or any other symbol, that i have on my keyboard.
View 5 Replies View RelatedVaio VGN-FW510F with W7 Home Premium - This has happened a few times but I can usually fix it by running system restore. Whenever I try to open a folder by simply double-clicking, it brings up an error message stating that I do not have a program assigned to perform the requested action. I checked my defaults and windows search is assigned to handle folder browsing. The only way into the folders is to right-click and hit Open, but along with that, cmd (in bold) is the first option in the right-click menu. If I click it, it says the same thing as trying to double-click.
View 8 Replies View Related