so I bought a new computer recently that came stock with a GTS 250 videocard, and was looking to add another video card for triple monitor display. my only options for expansion are PCI and PCIe x1. what videocards are compatible/would work with this setup?
View 9 RepliesIt may be because there are 3 DVI ports on the one card but Win 7 does not recognise all 3 monitors, only 2.
On the contrary the Nvidia control panel recognises all 3 monitors and I am able to configure all 3 screens with a res of 5760 / 1080. All is fine until I reboot and then nothing. All monitors blank. I can only assume that it's because of a conflict with the Nvidia driver (latest) and windows.
My question is, is it possible to force windows to recognise all 3 monitors?
ASUS SKT-1366 P6T Deluxe V2
Windows 7 64 bit
i7 975 Extreme OC to 4.2GHZ
6gb of 1866mhz Dominator DDR3
1TB Samsung F1 SATA II
Nvidia GeForce 590 GTX
Acer 3D 27 inch X 3
3D Vision Surround.
im running build 7100 and after hearing that windows 7 supported heterogeneous graphics cards i was excited to try it out.
ive tried but i can't seem to get it working.
i am using a 8800GT PCIe and a FX5200 PCI.
my first question is, is it not working cos the fx5200 is too old?
Are there any tricks to running games well on a three monitor setup?
I only have 2 x16 slots running dual evga 275 gtx oc on a tyan s2915 motherboard with 16 gb ram, dual quad core 2356s,raid x-25m ssds and three 24 in monitors under windows 7U 64. This is loads better than vista 64 (I can't even talk about it) but it still chokes when the action gets heavy. Obviously this computer is used for manuscript creation-writing model analysis by day but I like to have a little fun at night. Hence I would like to tweak what I can without going to two monitors (can't stand the line in the middle) or going to a new MB.
I have 3 monitors set up technically although one is my 54'' TV to play movies on while I work and play. Ultimately what I would like to do is while I'm playing movies and not using the other monitors (such as laying down to take a nap or playing movies with friends) I want to have a screensaver display on the unused monitors. I'm not sure if this is actually possible with a movie up on the TV but if anyone has any idea of a program i could use
I'm also running windows 7 ultimate if that matters any to you...
I have been trying to get my dual monitors working on my Windows 7 machine. It used to work under XP but now with both monitors plugged in, I get no mouse curser on the log in screen, and after logging in, the screen goes blank.
The second monitor (VGA) doesnt even show the POST startup and never gets any input. If I unplug the primary monitor (DVI) the second (VGA) monitor works and vice versa. I have installed the latest Nvidia drivers but no change. Any ideas please anyone?
I installed Win 7 on my tablet HP TC1100.
Windows 7 doesn't recognize the graphic card nvidia GeForce 4 Go 420 (32 MB, 4x AGP).
The display of the tablet ist running correctly (1024x768),
the second monitor (1280x1024) shows the same screen in the simple resolution.
There's no second monitor in the system settings, only the standard vga-graphiccard and a pnp-monitor.
I tested some nvidia-driver (185.20vista32 Guru3D.com), but its not possible to install (there a incompability error).
I installed the windows 7 on a partitioned drive. And the Os works alright but i get these random and lately consistent error that when I run the OS, My monitor does not displaying anything after the windows logo startup. Its a black screen, the monitor displays information in safe mode but not in regular mode. If I go back to windows vista everything runs fine. I need to restart the OS constantly before it finally displays the windows bar etc etc.
My graphics driver is Nvidia Geforce 8600 GT, My monitor is acer P223w.
My resolution is 1680 X 1050.
I have installed latest windows 7 update also on the driver.
I have noticed one thing that windows 7 gives me an option. To display images on two monitors but I only have one installed. So i think that might actually be the problem on boots. So i modified the setting.
Original install of Windows 7 did not support dual monitors. Symptom was primary display blue and right display black with no way out. Went back to single monitor and installed the same driver I got to work in Vista and it worked great - 158.24_forceware_winvista_32bit_english
View 3 Replies View RelatedJust tried to install an old 17 inch dell flatscreen as a second monitor and want to extend displays so that my desktop and all programs are shown across two monitors.
Selecting extend displays just shows my desktop background image on the second screen, regular desktop on the first screen. duplicate displays works as intended.
I'm on a Sony Vaio laptop with a second monitor connected with a VGA cable. I just switched from Vista to Windows 7 and my second 22" monitor is not being recognized under the resolution screen. It worked perfectly fine on vista just hours prior. I tried hitting the detect button, reconnecting the monitor, and restarting. What am i doing wrong?
It might be my graphics card, im pretty sure i have a nvidia geforce 7200m gt. cant seem to find drivers for it anywhere. My computer keeps telling me all my drivers are up to date, yet my second monitor is still not recognized. this doesn't make sense. Should i just go back to vista?
Yesterday i bought new grafic card geforce GT440 after my old 9800 GT stoped functioning normaly(memory failure). So here is the problem, when I start any program or do anything the computer the computer is functioning normally, but when I turn to desktop(which has black wallpaper) the monitor goes so dark that I can't see almost nothing. I tryed to find some power saving options in windows(win 7 pro, 64 bit) and on envidia control panel but i cannot find any cause for that dark screen. Even if I load a black page on my mozilla the monitor goes dark. As it cannot represent dark colors normally.
View 4 Replies View Relatedi am getting a NVIDIA GeForce GT 430 i want to know is it better and by how much
View 2 Replies View RelatedCan i make a triple boot XP/Vista/7 on a Virtual Machine ?
(Split up into 30GB partitions each)
So, I am trying to get triple monitors set up on my computer, and for some reason windows 7 isn't seeing the third monitor. [code] This Motherboard has a monitor output, as well as a video card port. The video card has two monitor outputs, one HDMI and one VGA. The Video card is an NVIDIA GeForce FX 5500.I have tested all three monitors and they all work. It seems that the only port that isn't being recognized is the one in the motherboard. (Dual monitors work fine through the video card)how to get windows to recognize that I have a third monitor plugged into the motherboard?
View 8 Replies View RelatedI recently added a fairly old PCI card to my 8800 PCIe Card running on windows 7 on a gigabyte GA 965P S3 and cannot get three screens working together...
With the BIOS set to use PCI first,
Windows boots on the PCI Card, The other two screens do not come on, Both cards are visible in device manager, only one card is shown in the Screen Resolution options.
With the BIOS set to use PEG first,
Windows boots on the 8800, two screens on, pci card off, pci card NOT visible in device manager, pci card not shown in the screen resolution options...
There doesnt appear to be any other bios settings to do with the screens.... im at a bit of a loss as to what to try next...
I would consider buying a PCIe x1 card to work along side the PCIe x16 card, will this not work for any other reason??
Any ideas anyone?
I'm planning on taking advantage of the price cuts announced today and would like to run W7 home Premium. I am currently triple booting with partitions for XP, W7-RC, and Linux. Would installing an upgrade version of W7 overwrite or otherwise disable the XP system, or would I need to purchase a 'full' version? I want to be able to keep that as is for the other member of the household.
View 3 Replies View RelatedI never setup a triple-boot system before. I kind of have an idea of how I'm going to attempt this little project but wanted to see what you guys thought. I have a 320GB asus laptop and plan on using Gparted live cd to do all my partitioning. I plan to create 2 NTFS partitions and then create an EXT3 partition plus a swap partition..
View -1 Replies View RelatedI installed Win 7 on a triple boot with Vista and Linux and meant to keep Linux and Win 7, expecting Vista to be overwritten. Unforeseen Vista remained installed.
Using a special boot cdrom, I get entries for all 3 OS, but Vista boots into my Lenovo laptop's rescue software and proposes to "rescue" the Vista and I can't get passed that. I expect it means deleting the other OS?
I imagine I could uninstall Vista in some way placed in the folder Windows_Old or maybe being able to boot it, as I would be able to get some registration keys off software as well as using some software that doesn't work on Windows 7. How can I now uninstall Vista safely?
I expect a partition manager like in Linux could recover the partitions for new data.
Does anyone have some comments on this?
I have four SATA II drives, four gig memory, etc, in my machine that have Windows XP and Vista dual-booting. Both OS's are installed on the same physical drives; about 150 gig each partition.
I've freed up one of the drives, changed the BIOS to boot from the DVD, and installed Windows 7, 64-bit. The installation completed without a hitch and the setup detected everything, sans the Viewsonic monitor. Windows did have a driver for the monitor, but I used the one for Vista 64-bit from Viewsonic and we are good.
After rebooting Windows 7, I expected to have couple of boot option but there's none. No XP and/or Vista, just Windows 7. I've tried to locate the bootmanager in Windows 7, but I couldn't find it and that worried me. There was no backup made since it should've picked up the other OS's.
I didn't touch any of the bootsectors, nor did Windows 7; the latter one did make the drive a primary disk and installed the boot record there. After modifying the BIOS, making the the XP/Vista drive the first drive to be booted, XP and Vista came back, but Windows 7 disappeared. I can boot either OS's by changing the order the drives are booted by the BIOS, but I rather have the choice for XP/Vista/7 in the boot menu.
I am not sure why Windows 7 didn't pick up on the other OS's; the reason could be the SATA drives, if I'd have to guess. Since "disk 1" was set as the first drive to boot by the BIOS, Windows 7 did not check other drives and declared itself the only OS.
The question is, how do I add Windows 7 to the Vista's boot menu, or alternatively, how do I add XP/Vista to 7's boot menu?
i'm try to make my laptop triple boot.i've installed windows 7 and xp, now i created a partition for vista but it became LOGICAL instead of PRIMARY so when i enter the vista setup i try to install it to the LOGICAL drive but of course it won't install.so i go to windows 7 and try to install it from the OS but it says that i don't have enough storage in my temp folder, i mean common..?!it probably goes by default to the first volume wich is SYSTEM PRESERVED and has only 100MB.
View 9 Replies View RelatedWhen I say at "double or triple speed" I do not mean make it run smoother, as in it's lagging.I have a program that does tasks, it waits about 20-30 seconds between tasks (I can't change that, I want to shorten the time it takes, so I want to change the speed of the whole program.I haven't found anything like that, all I get is how to stop lag on your computer, since it's referred to as
'running your computer faster'.
Let me get right to the point (details to follow). I want to be able to triple boot Windows 7, Mac OS X and Ubuntu and I don't know how or if it is even possible. For the past few weeks I have been looking for a guide on how to triple boot using Windows 7, OS X and Ubuntu. However, I have not been able to find a guide that pertains to my situation; my situation is that I have Windows 7 already installed which I am currently using and now I want to install and use OS X and Ubuntu in a triple boot configuration. The guides that I have seen so far have OS X as the starting operating system and go on to show how to install Windows 7 then Ubuntu, or the guides force me to repartition the drive with my Windows 7 installation and start all over, or the guides only show me how to install all three operating systems on a single drive with three partitions. Ideally here is what I would like...1. Keep my original Windows 7 installation intact. I have quite a few programs installed and would very much enjoy not having to set up everything again.2. Have each operating system (Windows 7, Mac OS X, and Ubuntu) on their own hard drive. Or at the very least have OS X and Ubuntu on a single drive, each with their own partition3. Be able to triple boot and select the operating system I wish to use.
View 3 Replies View RelatedI have done this before for myself without any problems and while bragging to my friend I was roped into setting up his computer with a third monitor. As the system is not mine I am trying to keep costs low and avoid buying anything. In short. I am trying to run three monitors, 2 through a ATI4600 series and 1 through an el-cheapo ATI Radeon 9250 256MB, however when both cards a plugged into the mobo the second (el-cheapo) will not run displaying a cannot start message.
View 2 Replies View RelatedRecently I had a drive failure and I need to have an extra Windows 7 x32. The remaining drive a WD 320gb drive has a dual-boot Windows 7 and XP. How can I triple boot in just one hard drive?
On that particular system I am using Neosmart's iReboot/EasyBCD so when I want to boot to either of the former arrangment I can do that easily and not be bothered by the boot selection.
Now I am using ATI Home 2011 and I was planning to make recover an image from the drive that failed to a 3rd partition on the WD320gb drive. I really need to get this one going in the meantime I do not have the money to buy a new one.
I currently have a 64 bit version of Windows 7 and Ubuntu 11.04 64 bit installed but I want to try out the beta release of Windows 8 Milestone 3 Build 7989 that is floating around.
View 7 Replies View RelatedI am dual booting with windows 7 and ubuntu linux. I recently found an xp install disk and decided I want to try it out. I heard I will need to migrate SATA drivers or something?
View 1 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.