I'm planning on taking advantage of the price cuts announced today and would like to run W7 home Premium. I am currently triple booting with partitions for XP, W7-RC, and Linux. Would installing an upgrade version of W7 overwrite or otherwise disable the XP system, or would I need to purchase a 'full' version? I want to be able to keep that as is for the other member of the household.
View 3 RepliesI never setup a triple-boot system before. I kind of have an idea of how I'm going to attempt this little project but wanted to see what you guys thought. I have a 320GB asus laptop and plan on using Gparted live cd to do all my partitioning. I plan to create 2 NTFS partitions and then create an EXT3 partition plus a swap partition..
View -1 Replies View RelatedBy default, to upgrade you have to start the install from a running OS. Is it possible to boot from the DVD and perform the upgrade if for various reasons your current OS won't boot properly?
View 2 Replies View RelatedI upgraded my pc components and now it will not start at all. As far as I can see all the bios settings are correct. On first start up a message come up first saying no disks found, then when I click onto the bios menu i have AHCI mode enabled and it detects SSD and CD drive absolutely fine. First I tried booting from original SSD with windows 7 already installed. Kept getting BSOD every time I get to windows loading screen.
Then after reading on forums people were re-installing windows back on to the SSD, but when trying to boot from the cd drive(yes its a bootable disc) nothing happens and it just goes to the windows repair screen then does nothing after attempting to repair. i have tried removing the SSD so only the cd drive is visible but then it comes up with the message "reboot and select proper boot device or insert boot media in selected boot device and press any key"
I have removed graphics card and tried on board graphics.
I have tried barebones.
I have tried new cables.
I have cleared Cmos + update
My Components:
Mobo: AsRock Z68 Extreme4 Gen3 (NEW)
CPU: intel core i3 processor LGA1155 (NEW)
Memory: Corsair Dominator 4GB 133mhz (TW3X4G1333C9D) (OLD)
PSU: Hyper 630w (OLD)
SSD: ocz sata 2.0 120gb (OLD) 1month old
Graphics Card: EVGA GeForce GTX 460 (OLD) 1month old
Cooler: Corsair H80 (NEW)
Case: Coolermaster 690II advanced nVidia edition (NEW)
All the old components were working previously.
Can i make a triple boot XP/Vista/7 on a Virtual Machine ?
(Split up into 30GB partitions each)
So, I am trying to get triple monitors set up on my computer, and for some reason windows 7 isn't seeing the third monitor. [code] This Motherboard has a monitor output, as well as a video card port. The video card has two monitor outputs, one HDMI and one VGA. The Video card is an NVIDIA GeForce FX 5500.I have tested all three monitors and they all work. It seems that the only port that isn't being recognized is the one in the motherboard. (Dual monitors work fine through the video card)how to get windows to recognize that I have a third monitor plugged into the motherboard?
View 8 Replies View Relatedso I bought a new computer recently that came stock with a GTS 250 videocard, and was looking to add another video card for triple monitor display. my only options for expansion are PCI and PCIe x1. what videocards are compatible/would work with this setup?
View 9 Replies View Relatedim running build 7100 and after hearing that windows 7 supported heterogeneous graphics cards i was excited to try it out.
ive tried but i can't seem to get it working.
i am using a 8800GT PCIe and a FX5200 PCI.
my first question is, is it not working cos the fx5200 is too old?
I recently added a fairly old PCI card to my 8800 PCIe Card running on windows 7 on a gigabyte GA 965P S3 and cannot get three screens working together...
With the BIOS set to use PCI first,
Windows boots on the PCI Card, The other two screens do not come on, Both cards are visible in device manager, only one card is shown in the Screen Resolution options.
With the BIOS set to use PEG first,
Windows boots on the 8800, two screens on, pci card off, pci card NOT visible in device manager, pci card not shown in the screen resolution options...
There doesnt appear to be any other bios settings to do with the screens.... im at a bit of a loss as to what to try next...
I would consider buying a PCIe x1 card to work along side the PCIe x16 card, will this not work for any other reason??
Any ideas anyone?
Are there any tricks to running games well on a three monitor setup?
I only have 2 x16 slots running dual evga 275 gtx oc on a tyan s2915 motherboard with 16 gb ram, dual quad core 2356s,raid x-25m ssds and three 24 in monitors under windows 7U 64. This is loads better than vista 64 (I can't even talk about it) but it still chokes when the action gets heavy. Obviously this computer is used for manuscript creation-writing model analysis by day but I like to have a little fun at night. Hence I would like to tweak what I can without going to two monitors (can't stand the line in the middle) or going to a new MB.
I installed Win 7 on a triple boot with Vista and Linux and meant to keep Linux and Win 7, expecting Vista to be overwritten. Unforeseen Vista remained installed.
Using a special boot cdrom, I get entries for all 3 OS, but Vista boots into my Lenovo laptop's rescue software and proposes to "rescue" the Vista and I can't get passed that. I expect it means deleting the other OS?
I imagine I could uninstall Vista in some way placed in the folder Windows_Old or maybe being able to boot it, as I would be able to get some registration keys off software as well as using some software that doesn't work on Windows 7. How can I now uninstall Vista safely?
I expect a partition manager like in Linux could recover the partitions for new data.
Does anyone have some comments on this?
I have four SATA II drives, four gig memory, etc, in my machine that have Windows XP and Vista dual-booting. Both OS's are installed on the same physical drives; about 150 gig each partition.
I've freed up one of the drives, changed the BIOS to boot from the DVD, and installed Windows 7, 64-bit. The installation completed without a hitch and the setup detected everything, sans the Viewsonic monitor. Windows did have a driver for the monitor, but I used the one for Vista 64-bit from Viewsonic and we are good.
After rebooting Windows 7, I expected to have couple of boot option but there's none. No XP and/or Vista, just Windows 7. I've tried to locate the bootmanager in Windows 7, but I couldn't find it and that worried me. There was no backup made since it should've picked up the other OS's.
I didn't touch any of the bootsectors, nor did Windows 7; the latter one did make the drive a primary disk and installed the boot record there. After modifying the BIOS, making the the XP/Vista drive the first drive to be booted, XP and Vista came back, but Windows 7 disappeared. I can boot either OS's by changing the order the drives are booted by the BIOS, but I rather have the choice for XP/Vista/7 in the boot menu.
I am not sure why Windows 7 didn't pick up on the other OS's; the reason could be the SATA drives, if I'd have to guess. Since "disk 1" was set as the first drive to boot by the BIOS, Windows 7 did not check other drives and declared itself the only OS.
The question is, how do I add Windows 7 to the Vista's boot menu, or alternatively, how do I add XP/Vista to 7's boot menu?
i'm try to make my laptop triple boot.i've installed windows 7 and xp, now i created a partition for vista but it became LOGICAL instead of PRIMARY so when i enter the vista setup i try to install it to the LOGICAL drive but of course it won't install.so i go to windows 7 and try to install it from the OS but it says that i don't have enough storage in my temp folder, i mean common..?!it probably goes by default to the first volume wich is SYSTEM PRESERVED and has only 100MB.
View 9 Replies View RelatedWhen I say at "double or triple speed" I do not mean make it run smoother, as in it's lagging.I have a program that does tasks, it waits about 20-30 seconds between tasks (I can't change that, I want to shorten the time it takes, so I want to change the speed of the whole program.I haven't found anything like that, all I get is how to stop lag on your computer, since it's referred to as
'running your computer faster'.
Let me get right to the point (details to follow). I want to be able to triple boot Windows 7, Mac OS X and Ubuntu and I don't know how or if it is even possible. For the past few weeks I have been looking for a guide on how to triple boot using Windows 7, OS X and Ubuntu. However, I have not been able to find a guide that pertains to my situation; my situation is that I have Windows 7 already installed which I am currently using and now I want to install and use OS X and Ubuntu in a triple boot configuration. The guides that I have seen so far have OS X as the starting operating system and go on to show how to install Windows 7 then Ubuntu, or the guides force me to repartition the drive with my Windows 7 installation and start all over, or the guides only show me how to install all three operating systems on a single drive with three partitions. Ideally here is what I would like...1. Keep my original Windows 7 installation intact. I have quite a few programs installed and would very much enjoy not having to set up everything again.2. Have each operating system (Windows 7, Mac OS X, and Ubuntu) on their own hard drive. Or at the very least have OS X and Ubuntu on a single drive, each with their own partition3. Be able to triple boot and select the operating system I wish to use.
View 3 Replies View RelatedPer microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
View 9 Replies View RelatedI have done this before for myself without any problems and while bragging to my friend I was roped into setting up his computer with a third monitor. As the system is not mine I am trying to keep costs low and avoid buying anything. In short. I am trying to run three monitors, 2 through a ATI4600 series and 1 through an el-cheapo ATI Radeon 9250 256MB, however when both cards a plugged into the mobo the second (el-cheapo) will not run displaying a cannot start message.
View 2 Replies View RelatedRecently I had a drive failure and I need to have an extra Windows 7 x32. The remaining drive a WD 320gb drive has a dual-boot Windows 7 and XP. How can I triple boot in just one hard drive?
On that particular system I am using Neosmart's iReboot/EasyBCD so when I want to boot to either of the former arrangment I can do that easily and not be bothered by the boot selection.
Now I am using ATI Home 2011 and I was planning to make recover an image from the drive that failed to a 3rd partition on the WD320gb drive. I really need to get this one going in the meantime I do not have the money to buy a new one.
I have 3 monitors set up technically although one is my 54'' TV to play movies on while I work and play. Ultimately what I would like to do is while I'm playing movies and not using the other monitors (such as laying down to take a nap or playing movies with friends) I want to have a screensaver display on the unused monitors. I'm not sure if this is actually possible with a movie up on the TV but if anyone has any idea of a program i could use
I'm also running windows 7 ultimate if that matters any to you...
It may be because there are 3 DVI ports on the one card but Win 7 does not recognise all 3 monitors, only 2.
On the contrary the Nvidia control panel recognises all 3 monitors and I am able to configure all 3 screens with a res of 5760 / 1080. All is fine until I reboot and then nothing. All monitors blank. I can only assume that it's because of a conflict with the Nvidia driver (latest) and windows.
My question is, is it possible to force windows to recognise all 3 monitors?
ASUS SKT-1366 P6T Deluxe V2
Windows 7 64 bit
i7 975 Extreme OC to 4.2GHZ
6gb of 1866mhz Dominator DDR3
1TB Samsung F1 SATA II
Nvidia GeForce 590 GTX
Acer 3D 27 inch X 3
3D Vision Surround.
is it possible on a Windows 7 laptop to install Windows 8 from the "upgrade" in such a way as to have a dual boot setup offering the option of running either OS? And if so, how exactly can this be done? I have a laptop running Win7 and ideally would like the option of trying, or being able to run, Win 8 without losing the original and familiar Win7 OS.Some websites say this is possible and suggest partitioning the hard drive (C) and installing Win8 in a separate partition. But it is not clear whether this requires a complete, separately-purchased original Win8, or whether it can be done using the Win8 upgrade (as in theory I assume the upgrade would normally use, or overwrite and replace, the existing original Win7 OS).As a separate but related question, I would also be interested to know - if a dual boot installation is indeed possible using the Win8 upgrade - whether the Win8 OS can be installed and run from a separate external hard drive connected via USB, rather than from a partition on the C drive.
View 2 Replies View RelatedEarlier xp but after win7 the booting not show xp at booting time
View 1 Replies View RelatedI currently have a 64 bit version of Windows 7 and Ubuntu 11.04 64 bit installed but I want to try out the beta release of Windows 8 Milestone 3 Build 7989 that is floating around.
View 7 Replies View RelatedI am dual booting with windows 7 and ubuntu linux. I recently found an xp install disk and decided I want to try it out. I heard I will need to migrate SATA drivers or something?
View 1 Replies View RelatedI have a ASUS G72 with Intel Core 2 Duo P8700 2.53 GHz.I have one HDD and 4 partitions in it(c is windows 7 home premium x64, d is windows 7 ultimate x64, e is empty and i am planning to install snow leopard on e and f is just my important files.).my dvd writer seems to be only compatible with dvd + r dl.i have a 8 gb microsd (SD) card.as i said, i want to install snow leopard on e: and i want to have triple boot (windows 7 home premium x64, windows 7 ultimate x64 and snow leopard).simply, just with a windows pc (notebook that is), how can i install snow leopard by the 8 gb SD or by dvd + r dl and how can i make a triple boot?
Note: Snow Leopard Installation DVD is 6 GB so it requires a DL DVD if being installed from DVD, the thing is -for some reason- people are advising DVD - R DL.
I installed Win 7 RC on a new build and purchased Vista Home Premium 64bit OEM with upgrade to Win 7 Home premium. The Win 7 upgrade disc has arrived. I understand that Vista must be installed and activated for the upgrade to work. Attempts to install Vista with Win 7 RC running or booting from the Vista disc lead to error code 0x80070103, insufficient free space. My HDD has > 450 Gb free space in 2 partitions. Do I need to reformat the HDD in order to install Vista over Win 7?
View 9 Replies View RelatedI ordered the 50$ Windows 7 upgrade disk. I realize that Windows 7 will need vista or XP already installed for the upgrade version of Windows 7. But if I want to upgrade my Vista 32-bit to Windows 7 64-bit, Will I be able to do it with this upgrade disk? after all I will need a fresh install (because 32 to 64) and this is the upgrade version...
View 9 Replies View RelatedCustomer dropped off a laptop telling me that his Windows upgrade had failed.
It's a new HP DV6 that had Vista pre-installed on it.
I've taken a look at it, and there's a "Windows.old" folder on the root of C:, which is of course a back up of all his data.
There's also a batch file inside the folder with the following inside of it:
"REM Dummy file for NTVDM"
I'm wondering if there's a way to "continue" the upgrade / merging process? He has asked me to re-install all of his software the way he had it. So i'm hoping there's an easier way to continue where he left off.
I know Windows 7 creates a "Windows.old" folder when upgrading from XP. Not sure why one was created for a Vista to Windows 7 upgrade though.
I have a pc with Windows XP pro 32bit retail version. First I have made an image, just in case. Then I have upgraded it to windows 8, 64bit by using the retail upgrade DVD and clean install. However, I found out that my motherboard is so old (5 years old) that there are no drivers for win8 and after asking ASUS they said that the motherboard is not supported any more and that there will be no new drivers for it. I tried using win7 drivers but it did not work and without correct drivers a lot of things does not work (in particularly hdmi port).What I want to do now is to revert to my image (windows xp), buy a Windows 7, 64bit upgrade retail DVD and upgrade windows xp to windows 7 for which there are drivers for my motherboard.
1) Can I use windows xp retail (whose product key has already been used to upgrade to win8) image to upgrade to windows 7 retail? will the activation of windows 7 succeed? I want to use clean install again since i upgrade from 32bit to 64bit
2) If the answer to question 1 is a yes, how does microsoft prevent users from using the same windows image file to upgrade different pc's? I mean, theoretically, I can make an image of pc1, copy it to a hard drive of pc2 (even if it will result in erroneous installation due to different specs) and upgrade both systems by using two VUP product keys which are cheaper than one VUP + one retail product keys
3) Can I use windows 8 upgrade DVD which is not used any more to upgrade another PC?
I purchased Windows 7 Professional through the Ultimate Steal.
Downloaded it, put it on a disk also.
It will go through the start of the setup and copy files etc, and then it will give an error and say to install from a current version of windows I need to use the upgrade anytim through windows.
But when I go to upgrade anytime it asks for an upgrade key, but all I have with the purchase was a product key and it says that I can't use the product key.
any help?
edit: also i have windows 7 home premium installed right now
and here is exactly what it says:
"To upgrade from one edition of Windows 7 to another edition of Windows 7, use Windows Anytime Upgrade. Cancel the upgrade, open the Start menu, and search for Windows Anytime Upgrade. "
can i use the windows 7 professional student upgrade to upgrade from windows 7 home premium?
View 4 Replies View Related