Installation Of Snow Leopard And Triple Boot (Windows + Windows + Snow)
Jun 30, 2010
I have a ASUS G72 with Intel Core 2 Duo P8700 2.53 GHz.I have one HDD and 4 partitions in it(c is windows 7 home premium x64, d is windows 7 ultimate x64, e is empty and i am planning to install snow leopard on e and f is just my important files.).my dvd writer seems to be only compatible with dvd + r dl.i have a 8 gb microsd (SD) card.as i said, i want to install snow leopard on e: and i want to have triple boot (windows 7 home premium x64, windows 7 ultimate x64 and snow leopard).simply, just with a windows pc (notebook that is), how can i install snow leopard by the 8 gb SD or by dvd + r dl and how can i make a triple boot?
Note: Snow Leopard Installation DVD is 6 GB so it requires a DL DVD if being installed from DVD, the thing is -for some reason- people are advising DVD - R DL.
For my studies in Brussels, they all use mac os x. I have a compaq laptop with an upgrade from vista on it (so now Windows 7 ultimate). I do not want to buy a new macintosh laptop because i do not want to ruin my savers (like 900 euro's)... So I bought my self a upgrade DVD (20 euro's) to Mac OS X 10.6 Snow Leopard. Is there any way I can just install that thing WITHOUT deleting my windows 7 (it has a lot of giveawayoftheday programs installed wich I use daily) so I do not want to lose them... and then set up a dual boot so I can just hit mac or windows? My laptop is complex and I do not know a lot about computers...
I'm trying to dual boot windows 7 and snow leopard. The problem that I am getting is, that when I try to boot into Mac it says kernel panic or something like that and tells me I need to restart my computer. I keep restarting it and keep on getting the same thing. I'll start from the beginning on how I started off. First I put in snow leopard cd then when the installer loaded i went into utilities, then disk utilities. I then split my hard drive into two partitions. First one I named Snow Leopard the second windows 7. Then after it erased everything and partitioned I installed snow leapord on partition 1 then windows 7 on partition 2. When I put in the Iboot CD and chose Mac it gave me the problem that I mentioned above. So right now I'm on the second partition the one named Windows 7.
Is this possible? I do not have a windows 7 cd, is this necessary? What version of Snow leopard do I need, and what other programs? If you know of a good tutorial, please post it! I'm new to partitions and bios and stuff.
currently running Windows 7 home,64 bit and would like to partition for Mac's Snow leopard too. thought I saw the partition option somewhere in the control panel options.
i have made the jump from mac osx which i have used since windows 98 second edition!) as a result i am behind quite a bit and wanted to know recommended apps for general productivity and pc use.
here are my system specs i7-870 gigabyte p55 ud3 4gb corsair dominator ddr3 1333 sapphire radeon 4870 1gb 1tb samsung spinpoint f3 (going to purchase a vertex 3 ssd when i becomes available for the sata 6) ultra 600 watt psu haf-x case
im moving up from a 2ghz core due macbook white so i am making a big upgrade
So I'm a computer engineering student and I would love to be able to dual-boot Windows 7 and Mac OS X 10.6 (Snow Leopard) on my Dell computer. However, I'm worried things will go terribly wrong and I'll end up screwing my computer up. I'm no expert (yet) when it comes to installation of OS's, partitioning, etc., but I'm pretty sure I could figure most of it out... if I had a guide.
Does anyone have/has anyone made a step-by-step Windows 7/OS X dual-boot procedure that is relatively simple to understand?
* As a note: I will be installing Windows 7 from a CD in about a week when I delete my Vista partition (after backing up all of my files). I'm assuming I would have to order Snow Leopard (a single use license) in order to install it!
I downloaded Animated Desktop Wallpaper Snow but now I want it to stop and off my computer! When I remove it from my computer it's still keeps on snowing.
Let me get right to the point (details to follow). I want to be able to triple boot Windows 7, Mac OS X and Ubuntu and I don't know how or if it is even possible. For the past few weeks I have been looking for a guide on how to triple boot using Windows 7, OS X and Ubuntu. However, I have not been able to find a guide that pertains to my situation; my situation is that I have Windows 7 already installed which I am currently using and now I want to install and use OS X and Ubuntu in a triple boot configuration. The guides that I have seen so far have OS X as the starting operating system and go on to show how to install Windows 7 then Ubuntu, or the guides force me to repartition the drive with my Windows 7 installation and start all over, or the guides only show me how to install all three operating systems on a single drive with three partitions. Ideally here is what I would like...1. Keep my original Windows 7 installation intact. I have quite a few programs installed and would very much enjoy not having to set up everything again.2. Have each operating system (Windows 7, Mac OS X, and Ubuntu) on their own hard drive. Or at the very least have OS X and Ubuntu on a single drive, each with their own partition3. Be able to triple boot and select the operating system I wish to use.
Recently I had a drive failure and I need to have an extra Windows 7 x32. The remaining drive a WD 320gb drive has a dual-boot Windows 7 and XP. How can I triple boot in just one hard drive?
On that particular system I am using Neosmart's iReboot/EasyBCD so when I want to boot to either of the former arrangment I can do that easily and not be bothered by the boot selection.
Now I am using ATI Home 2011 and I was planning to make recover an image from the drive that failed to a 3rd partition on the WD320gb drive. I really need to get this one going in the meantime I do not have the money to buy a new one.
I currently have a 64 bit version of Windows 7 and Ubuntu 11.04 64 bit installed but I want to try out the beta release of Windows 8 Milestone 3 Build 7989 that is floating around.
I tried and tried but never succeeded. I have dell inspiron e1505 and I am trying to dual boot Window 7 and Leopard. Has anyone successfully done this?
I am dual booting with windows 7 and ubuntu linux. I recently found an xp install disk and decided I want to try it out. I heard I will need to migrate SATA drivers or something?
I installed Win 7 on a triple boot with Vista and Linux and meant to keep Linux and Win 7, expecting Vista to be overwritten. Unforeseen Vista remained installed.
Using a special boot cdrom, I get entries for all 3 OS, but Vista boots into my Lenovo laptop's rescue software and proposes to "rescue" the Vista and I can't get passed that. I expect it means deleting the other OS?
I imagine I could uninstall Vista in some way placed in the folder Windows_Old or maybe being able to boot it, as I would be able to get some registration keys off software as well as using some software that doesn't work on Windows 7. How can I now uninstall Vista safely?
I expect a partition manager like in Linux could recover the partitions for new data.
I have four SATA II drives, four gig memory, etc, in my machine that have Windows XP and Vista dual-booting. Both OS's are installed on the same physical drives; about 150 gig each partition.
I've freed up one of the drives, changed the BIOS to boot from the DVD, and installed Windows 7, 64-bit. The installation completed without a hitch and the setup detected everything, sans the Viewsonic monitor. Windows did have a driver for the monitor, but I used the one for Vista 64-bit from Viewsonic and we are good.
After rebooting Windows 7, I expected to have couple of boot option but there's none. No XP and/or Vista, just Windows 7. I've tried to locate the bootmanager in Windows 7, but I couldn't find it and that worried me. There was no backup made since it should've picked up the other OS's.
I didn't touch any of the bootsectors, nor did Windows 7; the latter one did make the drive a primary disk and installed the boot record there. After modifying the BIOS, making the the XP/Vista drive the first drive to be booted, XP and Vista came back, but Windows 7 disappeared. I can boot either OS's by changing the order the drives are booted by the BIOS, but I rather have the choice for XP/Vista/7 in the boot menu.
I am not sure why Windows 7 didn't pick up on the other OS's; the reason could be the SATA drives, if I'd have to guess. Since "disk 1" was set as the first drive to boot by the BIOS, Windows 7 did not check other drives and declared itself the only OS.
The question is, how do I add Windows 7 to the Vista's boot menu, or alternatively, how do I add XP/Vista to 7's boot menu?
i'm try to make my laptop triple boot.i've installed windows 7 and xp, now i created a partition for vista but it became LOGICAL instead of PRIMARY so when i enter the vista setup i try to install it to the LOGICAL drive but of course it won't install.so i go to windows 7 and try to install it from the OS but it says that i don't have enough storage in my temp folder, i mean common..?!it probably goes by default to the first volume wich is SYSTEM PRESERVED and has only 100MB.
I never setup a triple-boot system before. I kind of have an idea of how I'm going to attempt this little project but wanted to see what you guys thought. I have a 320GB asus laptop and plan on using Gparted live cd to do all my partitioning. I plan to create 2 NTFS partitions and then create an EXT3 partition plus a swap partition..
It may be because there are 3 DVI ports on the one card but Win 7 does not recognise all 3 monitors, only 2.
On the contrary the Nvidia control panel recognises all 3 monitors and I am able to configure all 3 screens with a res of 5760 / 1080. All is fine until I reboot and then nothing. All monitors blank. I can only assume that it's because of a conflict with the Nvidia driver (latest) and windows.
My question is, is it possible to force windows to recognise all 3 monitors?
ASUS SKT-1366 P6T Deluxe V2 Windows 7 64 bit i7 975 Extreme OC to 4.2GHZ 6gb of 1866mhz Dominator DDR3 1TB Samsung F1 SATA II Nvidia GeForce 590 GTX Acer 3D 27 inch X 3 3D Vision Surround.
From my windows DVD, I've made an ISO image of it so I can copy it fully onto my USB(making it an ONLY install USB). The copying process took about 1-2 hours. I checked if the file were all there and it was. I then attempted to boot it from USB at the start of computer. I chose BOOT MENU > USB DEVICE, it takes about 1 minute then it says "Selected device is not available - press F11 to try again and F12 for setup" I think it was like this."The files were all there, with the autorun.inf and all codes are good but how come it won't boot?
I currently have 4 drives. I had Vista on my primary drive1, no OS secondary slave drive, Linux on my sata drive1, and Windows 7 64x on my sata drive2. I recently deleted Vista and installed windows 7 86x on my primary drive. Before installing Windows 7 86x the windows boot option gave me the choice to choose between the three OS and now it does not. The Windows 7 x64 drive is accessible and I'm able to view all folders but I can't get it to boot and that is where I have all my programs and work.
How can I get the boot manager to recognize my windows 7 64x drive which is not the primary drive?
well I'm having a bit of a problem. I got Windows 7 Pro 64bit installed on my computer but it won't boot up into it. It just sits at the screen "Loading Operating System." and does nothing.I'm at a loss at what I need to do. I can reinstall 7 if needed which will get me to the desktop but once I restart, it doesn't boot into it (ok I haven't tried a second time but I will in a sec).So does anyone have any idea on what I need to do?My motherboard Newegg.com - GIGABYTE GA-880GM-UD2H AM3 AMD 880G HDMI Micro ATX AMD MotherboardI have an old 80gb hdd as my main drive. Brand: Seagate
Recently i decided to stick some extra RAM in my old computer as 2GB didn't seem like enough. After removing the 2x 1gb sticks and putting in everything (2x 2gb and 2x 1gb) when i got to windows boot up screen it took a while to load, and then froze. I played around with the RAM, tried only one of the 2gb in all 4 DDR2 slots and it booted perfectly, i did the same with other 2gb stick and same result so it isnt the RAM, and neither does it seem its the slots. Did the same thing with the 1gb and fine. tried every permutations involving the 4 sticks but whenever i top 2gb windows freezes.I read around first and looked at similar problems people have had on this, and so i cleared the CMOS and updated the BIOS but still the same result (didn't do all permutations this time). Here is the specs for everything:
Mobo- P5N32 SLI SE DELUX http://uk.asus.com/Motherboards/In [...] SE_Deluxe/ RAM- Corsair 2GB 800 DDR2 and Corsair 1GB 667 DDR2 Relevant Info from CPU-Z: Memory
Have dual boot; XP and 7. 7 will no longer boot, asking for the installation CD. I don't have an installation CD, only the one that puts everything back as it was when purchased. Can I get a boot file that will boot from USB? Or since I can see the 7 drive from XP, could I add a file to Win7? I checked on EasyBCD that is supposed to work, but I' use RollBack and it won't work with RollBack installed. I'm afraid to uninstall RollBack since it has saved me so many times in the past.
i have hp pavilian core to dou system with 2.2 Gh processor, 1 gb ram. it was running successfully with windows ultimate new but it was corrupted and i have lost the dvd of ultimate new. Now i am installing window7 ultimate it installs successfully but after installation when i boot my system from hard drive then it is unable to boot.a blank black screne appears with blinking cursor. but no message to display.
My friend's Gateway laptop has problems and I want to install Windows again. But when I try to boot to the installation disk, after I select the DVD in the boot selection menu, I just get a blank screen with a flashing cursor. After a few minutes, one time I saw a message that said something like "bootmgr cannot be found" or is missing or something like that.
But the computer can successfully boot to a Puppy Linux boot disk.
My mate had trouble with wayyyy too low fps in a game.W decided to install Windows 7 ultimate x64 on his laptop then.We couldn't upgrade vista to it, so we chose the "custom install" option, where Windows 7 gets installed separately and vista gets moved into a folder called windows.old.We were almost done with the install and had just passed the time and network setup, suddenly a small window flashes with the text "windows failed to complete...." we couldnt see the rest and the laptop rebooted.Then we got continually stuck on "press any key to boot from CD or DVD...".Sometimes we get it to continue and it gets stuck on "Windows is loading files". And 2 times it completed loading files and shut down instantly after.
After formatting and setting a new partition using the installation disk, I install Windows 7, all goes well. But as soon as the installation is finished and my laptop restarts, it wont boot from the HDD. I keep getting error messages saying:
Windows Boot Manager
Windows failed to start.... File: ootBCD Status: 0xc000000e
[Code].....
A copy of the current boot configuration data will be saved as c:ootcd.backup.0001
However when i hit the "ok go ahead and fix it then!"-button i get another error saying Startup Repair cant save the new boot options. Anyone know if i can fix this problem with BCDedit or bootrec.exe
My computer has been unable to boot to the Windows 7 installer for the past two days. My boot order is correct I have confirmed that the drive works (It runs a live CD of Ubuntu just fine). I have checked that the disk works (it boots fine in another machine). I have used this same disk on this computer before several times before with successful outcomes.
My diagnostics come back successful as well. I'm on a Dell Studio 1735 (from 2008). I'm really at a lost as to why it's not booting to the DVD. I'm currently typing this from my Ubuntu partition; I don't have convenient access to a Windows machine at this point.
