So I am not getting any audio through my speakers anymore this happened after I unplugged my headphones but it doesn't disable that they are unplugged I open my Realtek HD Audio Manager and it shows that the front jack has headphones in when they indeed aren't. I can plug in my USB headset/mic and get sound through there due to it coming up as its own device so its something to do with my speakers in headphone mode.
View 9 RepliesI have HP DV4 Pavillion core i3 with Windows7 operating system.I would like to know if we could use the inbuilt speakers and headphone simultaneously forexample...headphone for voice chat and inbuilt speakers for music playing.
View 3 Replies View RelatedI have my headphones plugged in but sometimes when I open programs and CPU % goes high then sound switches to speakers. It only happens for a short time (under a second).
View 1 Replies View RelatedI've got a Compaq Presario CQ61, Windows 7 SP1 installed, fully patched. I've got no sound from internal speakers and headphone jacks. I've uninstalled drivers and re-installed, I've used DriverMax to find drivers as well, uninstalled and reinstalled. No luck. Thats what's showing in my Device Manager. Volume Control is not muted, and maxed out for volume, and there is movement when clicking on the volume control just no sound.
View 3 Replies View RelatedOk, i've searched for the solution the whole night yesterday but couldn't find it. For some reason My laptop speakers won't output any audio when running windows 7. However when I plug something in like a headphone it works just fine!
View 0 Replies View RelatedI have Dell Inspiron N4050 Laptop with Integrated Webcam and running Windows 7 Ultimate edition - 64 bit.I normally call using Gmail's Call phone service. I want to setup so that I can use Internal microphone in laptop to transmit my voice and hear the incoming call voice using external speakers.I normally keep external speakers connected to laptop for listening to music, but whenever I have to make a call, I have to remove the speaker cables and connect headphone cables in audio jack. So, I am looking up for solution to do make audio/video calls using external speakers and without needing to connect headphones to transmit my voice to caller.
View 2 Replies View RelatedI have an Hp625 running Windows 7 Basic 32 bit - I can play music through my laptops built in speakers without any problems, but when I plug headphones (or external computer speakers) into the headphone jack no sound comes through them (and simultaneously the laptop speakers go mute). My computer is dual boot with ubuntu, and this problem appeared when I upgraded my Ubuntu version - still, I know that the jack works as it is working fine in Ubuntu, and Im sure the problem is fixable within windows!
My computer is using the IDT audio control panel, and according to windows everything us up to date and fine.
My laptop is 5 months old ,it is hpdv6 3079tx. My laptop got i7 processor with win 7 64 bit. Currently I am facing a problem with my laptop. The sound is not coming out from the in built speakers as headphone is working very well. The sound from in built speakers last for just 2 to 3 mint and then goes off.
View 4 Replies View RelatedI have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
View 3 Replies View RelatedMy parent's Desktop was having a side x side error and i've been trying to help her get it repaired. Her problem is that none of the programs will open except for internet explorer. All other applications give the sxstrace.exe error and won't open. I advised her to hit F8 and get into safe mode so I could try and help her further. She couldn't get that to work so I had her force safe mode through msconfig. That worked and got her into safe mode and she's still getting the sxs error and can't get anything to work for her. I advised her to go back into mconfig and uncheck the safe mode boot and wait til I come home and fix it. Now the problem is when she tries opening the msconfig, she gets an error on that saying it can't open the application with the error code 0xc000142 Now she's stuck in safe mode with no networking and the computer is basically useless. I'm 800 miles from home and won't be there until thanksgiving and i'm trying to help her over the phone so im kind of limited here. I was trying to get remote assist going for her but she couldn't install that either without the sxstrace.exe error.
they're running windows 7, If i remember correctly it's the x64 version.
So this might be the wrong place for this thread but I didnt see a computer specific section so i picked this just incase it is related to my windows. Anyway the problem i am having is that every so often, more often then not actually, when my computer hibernates from inactivity, it cannot be woken up. I click the mouse, press everything on the keyboard and nothing will happen. I even try pressing the power button yet that does nothing. The power button just keeps blinking as normal when in sleep mode. I also tried Holding down the power button, in hope to force shutdown the computer but that did not work either. The only way anything happens is if i unplug the computer and then plug it back in. Unfortunately i know thats really bad for the computer but i dont really have a choice.[CODE]In addition, i have restored my computer to factory defaults, aswell as installed all the latest drivers
View 4 Replies View RelatedMy pc appears to be stuck in sleep mode. Earlier today I put my pc in sleep mode before going to the gym. When I came back and clicked the mouse the fans and lights came on but nothing appeared on the monitor. I turned the power off and turn it back on and the lights and fans come on again but nothing appears on the monitor. No boot menu, nothing. Also after turing it on, the fans and lights randomly goes off and on, usually with an interval of 30 seconds. During this nothing appears on the monitor.
I have had the same exact problem happen once before - about 4 months ago. When me and my friend tried fixing it we tried some of the following with no result:
- Using a different monitor.
- Using a different graphics card.
- Using different RAM.
- Removing dust.
Specs
- Antec 900
- Intel E8500
- ASUS P5Q SE2
- Sapphire HD 6870
- 4GB DDR2 Crosshair-something
Basically my hp 2000 screen is busted so I have been using a external display with that being said I had accidentally toggled te safe mode minimal option in MSCONFIG and my computer rebooted I have no way of seeing what's on the screen right now because it is not loading to my external display what are my options? I called hp and they just told me to get the display of the laptop changed
View 4 Replies View Relatedim having problems with my monitor, it doesnt want to get out of sleep mode. Right now I have the comp apart which is no problem for me to put it back together. Im assuming its either the battery not giving enough power or the connection where you plug the monitor into is bad.
View 14 Replies View RelatedI have a problem with my keyboard (set to US keyboard); but for some reason it is in an alternate mode where instead of the 'white' keys on the keyboard it prints alternate 'blue' keys. I don't know how it got into this mode - or how to get out. To me (when I go to adjust my keyboard settings) everything seems normal
View 2 Replies View RelatedI can only boot up in safe mode Ive tried loading windows 7 disc to repair wont work in safe mode,did restore no luck,did panda safe disk reload did virus scan clean,did dskchk,tried start windows normal from f8 menu,last known good config etc.
View 3 Replies View RelatedMy windows 7 toshiba laptop wont get past a screen that says
Intel UNDI, PXE-2.1 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8101E/8102E PCI-E Ethernet Controller v1.07 (080320)
PXE-E61:Media test failure,check cable
PXE-M0F:Exiting PXE ROM.
No bootable device--insert boot disk and press any key"
The problem is I dont have a boot disk and i cant get past this screen. P.S. it happens when i turn it on, it goes to a black screen saying that.
I have just finished my first custom build pc and everything is up and running great. But there is a couple of problems, the biggest one being that windows 7 seems to be stuck in classic theme. I am running windows 7 home on my core i5 2500k with a radeon hd 6770. I have tried all sorts of things and can not get this fixed.
View 6 Replies View RelatedHow do I unstick my computer? It is a Gateway DX4350 Win 7, integrated graphics. Monitor only shows "In Power Save Mode" after pushing a button on the monitor, even after I turn computer off (unplug). There is no POST screen, although I'm sure the computer is turning on and booting, after I installed a PCI video card. Monitor shows nothing from the computer, but does indicate a connection by telling me it's in Power Save mode.
View 4 Replies View RelatedYesterday morning I started my laptop and it was frozen at the Acer screen. After I restarted a few times I called acer tech support. Via remote access the tech support agent was able to see that, even though I have McAfee installed, my computer had trojans and a lot of files had been affected. He told me he could fix it but it would cost $200 which I can't afford right now. So I ordered the windows 7 reinstall disc and hung up. I decided to try doing a system resore back to factory settings. I began the restore and had no problems. Then when the computer went to automaticaly restart it continued to remain stuck on the acer load screen but I found that if I left it alone for about 45 minutes it would automatically restart and continue with the restore process, adding files and whatnot. My newest problem is that the restore is stuck. It started loading Office 2010 and has been doing it for 12 hours now.
View 4 Replies View RelatedI've been trolling Google for about an hour now and haven't found anyone with this exact problem (which worries me a bit).My boyfriend got several viruses on his Asus desktop computer. After multiple attempts and anti-virus programs we decided that it was best to just go ahead and restore his computer to factory defaults.We backed up files that he wanted to keep then followed the instructions from the online manual (Asus CM1630 Manual page 66) to do a System Recover since we didn't have the CD.Everything looked like it was going well, no errors during recovery, but after the reboot when the recover was finished, the computer brought us back to the Recovery Window after an error "RDVD folder not exist!", an error I can't find much information on. You can click "OK" then exit out of the Recovery window, but it gives you a "Disk 0 doesn't exist", restarts, and throws you back to the "RDVD" error.
Only thing I can gather from this is that for some reason it's not writing to the partition properly. Again, we don't have the $50 CD to resintall the OS (Essentio Recovery Software).However, I did find this site that clams to have official ISO images for Windows 7: Download Windows 7 ISO (Official 32-bit and 64-bit Direct Download Links) � My Digital Life I'm tempted to just burn the ISO image to a CD and try to reinstall it that way, but he doesn't have any of the paper work or anything so if those installs require an activation code, we're plumb out of luck.
If I close my laptop, half the time, the computer freezes after I put in my password. It just gets stuck on the welcome screen with the spinning wheel. It doesn't always happen, but I have to do a hard reset everytime it does. I already set the HD to never turn off, so I am just wondering what else i can do to stop this freezing?
View 6 Replies View RelatedI left my computer running overnight as I usually do. When I went back to it this morning, it was stuck in power saving mode. When I rebooted, everything looked fine and the windows logo loaded but when I reached the login screen it went directly to Power Saving mode and got stuck there.
I am posting this from Safe Mode with Networking.
i have toshiba satellite A205 win 7 its been freezing a lot lately i dont know why so i tried to install Windows 7 OS again (its not genuine) i usually do this successfully if i get virus but i dont think its virus this time but during the installation it got stuck it passes the copying windows file up to completing installation but it says it needs to be restarted and i did this several times it either hangs up or tells me cannot be installed restart.whenever i start all over again a black screen comes up with listing windows 7 several times asking me to select 1.i select the latest but same thing happens allover cannot access safe mode either i tried to install win 7 ultimate geniune but same thing happens.i also tried the repairing option its not working keeps telling me to restart..i believe its the hdd thats corrupted.i need to get my files.
View 4 Replies View RelatedMy laptop just shut itself down saying something about it being damaged if it didn't. I didn't see the error myself someone else was on it at the time. It will not boot in any mode, safemode it gets stuck at random drivers it won't even boot from my OS disc to repair. It will load all the files from the disc then it shows the initial Windows start screen then is just black with the mouse pointer.
Toshiba Satellite a665-s5173
Processor Intel - core i5-480m processor
Operating System - Genuine Windows 7 Home Premium (64-bit)
Graphics Engine - Mobile Intel HD Graphics
My system is stuck in a boot loop while booting in safe mode,I was updating the drivers on my video card. I used driver cleaner pro to remove my old drivers. I then used msconfig to boot in safe mode with the minimal option selected. When the computer reboots I get to the screen to type in my password for 5 seconds an the computer reboots itself.
View 5 Replies View RelatedWhen I start my computer everything seems to be working fine but after login it says Please Wait then freezes at Welcome screen and the cursor can be moved around the screen and shows the loading icon and the screen also flashes black every few seconds. I've restarted and attempted to access Safe Mode however it also freezes at Welcome screen. I went into the repair system screen and tried a system restore but it says there are no restore points available and I know I haven't deleted my restore points. I've tried disconnecting any of the hardware I've had installed but that hasn't helped either. There also isn't any faulty hardware. When it was last working it said there was a Windows update so I installed the update but when I tried to turn on the computer the next time thats when the problem started and I don't remember what the update was for. I upgraded from Windows Vista Home Basic 32-bit to Windows 7 Home Premium 32-bit about 2 months ago and up until now I've had no problems with it. What can I do?
Here are the system specs:
Dell Inspiron 530s
Intel Celeron 2.00 Ghz
3.00 GB DDR2 RAM (I added 2.00 gigs myself came with 1.00 gig from factory)
Windows 7 32-bit upgrade from Windows Vista Home Basic 32-bit
250 Gb Hard Drive
My Windows 7 ultimate x64 is rebooting itself at the welcome/logon screen, in safe mode only. Normal mode is fine. The reboot happens instantly, after a few seconds at the welcome screen, the screen goes black and the system is rebooted as though I had hit the "reboot" button on the case, with no clean shutdown taking place. I am at a loss to know what could be starting in safe mode, that _doesn't_ start in normal mode, to cause this.
I have recently done a repair install of windows (the problem was there before that), I have tried replacing the safe mode parts of the registry with clean ones downloaded from an AV vendor website (mcafee if I remember correctly), and have tried doing sfc /scannow which resulted in a corrupted boot.sdi being replaced with the archived copy. None of these have fixed the problem.
Obviously, given that I have a usable normal mode, and good backups, this isn't the biggest problem ever, but it would be nice to get it fixed especially for the next time I need to fix a dodgy driver install or similar. What I can check next, particularly in regards to understanding the startup process and what will be loading at the welcome screen that might be causing the reboot.
I went into msconfig on the work laptop and changed the boot to safe boot network, as soon as I went to boot up the laptop and get into safe mode, the laptop freezes at CLASSPNP.sys then I have to reboot.I need to get it to boot back into windows normally, but even selecting "Start windows normally" sends it to safe mode because I set it to boot there in msconfig. What can I possibly do? I've tried running start up repair but says it cannot repair the issue. Due to security, the laptop hard drive has been encrypted with truecrypt, and therefore when I put the OS DVD in to try and do something from the command prompt, there are no OS's listed as installed so cannot alter the bootmbr or any windows files.
View 1 Replies View RelatedSatellite A505 is stuck on the Windows 7 recovery screen. I launched the recovery back to a date when the system was working and now the system is stuck on this screen.
View 1 Replies View RelatedHow do you put the Touchpad into the Horiz/Vert mode, and more importantly, how do you get it out of that mode?
View 1 Replies View Related