Shrew Soft VPN With RV042 In Windows 7(64)?
Dec 19, 2009
I can't get Shrew to work with my RV042 in Windows 7 (64-bit). All computers are using Windows 7 Professional. Here's the rest:
Shrew Version 2.1.5
Firmware 1.3.12.19-tm
Firewall disabled
Multicast Pass Through enabled
IKE with preshared key
VPN Pass Through enabled
Shrew hangs on "bringing up tunnel," right after preshared key configured.The debug log states that IKE packet gets sent with no response, and negotiation times out.
View 3 Replies
ADVERTISEMENT
Feb 26, 2010
I would like to know if Shrewsoft VPN Client can be installed on Windows 7 (32 Bit) with Checkpoint & Cisco Clients already installed. I have both Checkpoint & Cisco Clients installed on Windows 7, with the respective services set to manual, and both clients are co-existing without any problem. Since I also support Juniper SSG boxes, and since Juniper has NOT YET come out with a client which supports Windows 7, I was wondering if I can use Shrewsoft client instead (which is reported to work fine with Juniper SSG).
Previously I had Vista on which all the 3 - namely Checkpoint, Cisco & Juniper (SafeNet) clients were working beautifully. But Vista being Vista, I had no choice but to upgrade to Windows 7.
View 2 Replies
View Related
Dec 10, 2012
As I'm sure many of you already know, older Windows versions 95/98/XP had a way of soft-rebooting Windows; it essentially allowed you to reboot the system without actually turning the machine off.
In the older versions, I believe you just held the shift button down after clicking Restart until it rebooted back to desktop without turning the mechanical parts off completely.
Does Win7 have a function like this? Or does there exist at least some kind of workaround for all the reboots required during software install/Uninstall?
View 2 Replies
View Related
Oct 9, 2011
Is the intel provide the graphic driver for the D865GSA Board for windows seven if provide then give me thread that from where i download these drivers. information about these drivers.Beacause i want to play games like Need for Speed games on the windows 7.
View 2 Replies
View Related
Aug 30, 2012
I am not able to understand the concept of "Soft" bad sectors. Can software be the cause of bad sectors?
View 1 Replies
View Related
Oct 24, 2012
I am working with Windows 7 on a Dell Optiplex 755, but teh issue is with the System Volume setting. When I go to the audio mixer and do the test and configuration, the SoundMax audio level is loud and clear. The problem is with the Windows system settings somewhere, is there a limiter or cap setting in teh registry that I can set to maximum? I know that it is not the standard slide bars/levels but somewhere that Windows 7 Professional is cutting the volume on any Windows application. The drivers are fine, if I invoke the card directly it will blast the sound out. But in any application it is too soft.
View 4 Replies
View Related
Jun 6, 2011
anyone know of a soft AP with ICS?
View 1 Replies
View Related
Jun 8, 2012
I just did some upgrades to my pc. Here are the current specs:
Motherboard: Crosshair V
CPU: AMD FX 6100
GPU: eVGA GTX 680 HC
RAM: 4x4GB Ballistix Tactical Tracer
PSU: Corsair 750Watt
OS: Windows 7 x64 Clean Install
HD: WDC-WD2500KS-00MJB0
Like it says above, this is a clean install. I have tested the RAM with Memtest86+ for 8 hours and found no errors. I have tested the HD with Seatools and found no errors. I have run Prime95 for hours without errors. I water cool my CPU and GPU and temps max at 37C.The OS constantly hangs, freezes, or whatever its called NONSTOP. Most of the time I'm able to move the mouse but can't DO anything with it. Eventually (within minutes) it comes back to life and does everything I'd been trying to do while it was frozen. I don't get much time inbetween freezes (a minute max between freezes). I've reinstalled the OS several times and no joy. At first I thought it was a bad motherboard, so I RMA'd it and it is still having the same issue. These freezes began happening well before video drivers were even installed (or any other drivers for that matter). It even does the same thing in SAFE MODE.from the EVENT VIEWER:
In the last hour: 19 Service Control Manager Error 7001
In the last hour: 44 amd_sata Warning 129 (this one always comes in pairs and always 30 seconds apart)
In the last hour: 169 Service Control Manager Information 7036
View 9 Replies
View Related
Jan 7, 2013
I have a USB DVB card that works good! 3 days ago I have working on virtual com ports in matlab soft! and after that when I connect dvb card to my laptop usb ports the dvb software doesn't detect dvb card! and shows this message: all capable dvb adapters are busyno free device has been found after that I try to reinstall matlab and dvb soft and dvb driver too, but it hasn't work yet
View 6 Replies
View Related
Mar 28, 2012
so i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
View 2 Replies
View Related
Oct 23, 2011
My computer hangs after a soft boot (reboot). Cold boots are fine.
View 1 Replies
View Related
Jul 13, 2012
Hi everyone. I installed Windows 8 today. I did partition the disk like in a guide, however, I missed where to install...I downloaded a Windows 7 iso image today and burned it to a disk, will I be able to install Windows 7 again from a disc? I still have Windows.old folder in my C drive, is there any way to dual boot Win8 and Windows 7?
View 9 Replies
View Related
Jun 8, 2011
I am getting the following error from past 2 days :-It says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your Computer".
Status: 0xc0000225.
Since i dont have the recovery disc so i downloaded the one from torrent but of no use as it failed to read from the USB.
View 5 Replies
View Related
Jan 25, 2012
I installed Win 7 Ultimate onto my brothers Win 7 Home Edn laptop. I didn't realise at first and he has done quite a bit of work on it since the installation, on iTunes and the like. I only noticed the error when trying to activate windows and, of course, as the laptop is Home Edn, and I used an Ultimate disc it didn't take the key on the laptop. So I have now installed Home edition and have the Windows.old folder present. I basically need to put all the programs and file/folders etc into the new OS.
View 4 Replies
View Related
Oct 18, 2012
the XF's are lost after rebooting Windows and it does not happen every time, ie occur alternately eg after 2 and sometimes 10 days...then i go to device manager sound and i have sb x-fi but at sound i havnt sound icon so i click right at sb x-fi icon at dm and uninstall...reboot windows..after rebooting sond install by itself my sound card from motherboard is disabled at bios.
View 7 Replies
View Related
Nov 26, 2011
the stellar customer service at Dell I have had to recently reinstall windows 7. I was running windows 7 prior to this installation and therefore those files have been moved to windows old. How do I reinstall this file? I'm assuming the process is the same as for other versions but being as I'm not that technically savvy I don't know how to change the command scripts to suit my situation.
View 9 Replies
View Related
Aug 18, 2011
I have a PC running Windows 7. It is constantly being locked out, and windows XP and windows 2000 both allow you to use the windows tool ALockout.dll to discover which process is causing the lockouts. Does anyone know if there is a similar program for Windows 7?
View 6 Replies
View Related
Apr 22, 2011
MS and their mail systems are giving me grief. I have a Vista 32 PC using "Windows Mail" and want to transfer email folders (lots) and messages to Windows 7 using Windows Live Mail 2011.Windows Mail was a replacement for Outlook express on Vista.Windows Live Mail 2011 is a replacement for Windows Mail on Windows 7.I tried a couple of things.
1) Basic Export and ImportI exported relavent files: Account info, Contacts and all the messages to a folder (in Windows Mail format) on old computer and used the old "Addias" transfer - copied folder to stick and RAN it over to the new computer.
- Imported (using the Windows Mail format) the Account info successfully,
- imported the Contact info successfully.
- Import Messages - appeared at first to be successful
Issue: Message folders appear to be renamed and some folder names have been truncated, not all folders appear to be there. (Looks like "long Name folders greater that 8 characters get truncated)
2) Tried the "Easy transfer mechanism (Vista and Win7 transfer utility) - but couldn't get the new computer to see the Vista even though I could see them on the network. I thought that this would transfer the folder names correctly.I'm about to try a time consuming effort of coping folder by folder (export/Import)What I am more concerned about is that the individaul messages may have the same issue Ie not all coming accross and subject names being lost. Looking for alternative or third party transfer solutions?
View 3 Replies
View Related
Jul 17, 2012
I just bought myself some new parts for a new computer I built. After buying the parts and assembling it I tried to install windows 7, keeping in mind that this computer has no previous os installed in it, completely blank. I somehow managed to get to safe mode and install till the part where it says expanding windows files completing that step fully and rebooting to continue the installation, I have no idea why but after when it restarts, it freezes at the "starting windows" screen with the four orb animation. It should just go to the next screen with the blue wallpaper asking me for the language I would like and what not. But it just gets stuck there and doesn't move on, I tried
rebooting
removing as much devices I had plugged into the motherboard
removing everything but the mouse and key board
removing the graphics card
removing one of the two sticks of ram
[code]...
I have tried everything I know of and I don't think I need to update my bios because no one else has encountered this problem. Swell I am not very good with computers I am very new to this so...I also heard about updating drivers , but don't u need to actually be able to login to your computer to download and install them? I can't even log in, I wait for the windows logo to pass but it never does please help Tom Hardware community.
View 4 Replies
View Related
Apr 8, 2011
I bought a new computer that came with a Win 7 HP license, however I already have a copy of Win 7 Ultimate on another smaller HDD that dual boots with XP.I have copied the Win 7 HP partition to the smaller HDD that has dual boot Win 7 Ultimate / XP using EASUS Partition Manager. Then I disk copied the smaller HDD to the new larger HDD thus wiping the original contents of the HDD.So far so good, the larger HDD now has C: Windows 7 Ultimate; D: XP Pro; E: Windows 7 HP. Of course the boot manager only has entries for the C: and D: partition.I think I can use bcdedit to add another entry but I am a little confused about how to do this, I've seen examples for Win 7 and XP or Vista but not for 2 copies of Win 7. Can anyone tell me what bcdedit commands I need to run? For instance I could run "bcdedit /create {} /d "Win 7 HP" but I don't know what to put inside of the {}, I think I need a new UUID but I don't know if I should be running "bcdedit /createstore" first or something else.
View 1 Replies
View Related
May 2, 2012
Yesterday i wanted to change my OS to windows 7 64bits (I had windows 7 32bits before and worked just fine). The installation goes well but when windows install tries to reboot to complete the installation it hangs on "windows start" and reboot again and again. I tried several solutions such as
- Install using a different cd (3 different cds and same problem)
- Install from USB flash (not even working)
- Fix boot system (from command prompt using windows repair cd)
- Re-install windows 32 bits (same problem)
- boot in Safe mode (same problem it reboots again and again)
- Windows system repair (from cd)
PS:I have a Dell inspiron M 560 (Core 2 Quad, 4Go in RAM).
View 9 Replies
View Related
Feb 20, 2012
I have a Toshiba Satellite A505-S69803; serial number Y9340538Q, with Windows 7, 500Gb HDD at 5400rpm and 4Gb RAM... I think that's all correct.Anyway, long story short, I got a b!tch of a virus, which apparantly was doing all sorts of nasty things to the explorer.exe file in particular. So I backed up all my important stuff: files, Uni work, writings, music and photos etc onto an external hard-drive and went about restoring the laptop to out-of-box factory settings by making the Windows 7 Recovery Media Discs. But when I try to use the discs I get told after about 30 minutes The Toshiba Recovery Wizard "Can't read from the source file or disk: PREINST5.SW5" with options to: Try Again (The same thing happens), or Skip (Same message again), or Cancel (in which case I'm back where I started).After the Recovery Wizard failed I chose the option to erase the hard-drive; it then appeared that when I turn on the laptop as normal I was told <Error>: F3-F200-0002 and the Recovery Media Disks still refuse to work.Now, if I turn on the laptop as normal a message telling me to insert the installation disc, choose language and click "repair your computer". So I put in the recovery disc and get the same message.
Toshiba can't help as my A505 is an American model in Britain and out of warranty anyway. Europe Toshiba HQ don't supply the recovery media for the A505 and the American based Toshiba aren't allowed to send the Recovery Media to Europe; so apparantly I get no help from them. And Microsoft can't help me because my laptop was purchased with everything pre-installed so the codes associated with my Windows and Office are comletely irrelevent.I have been told that I need to purchase a compeltely new hard-drive and purchase Windows 7 brand new to get my laptop back up and running. Purchasing a new OS isn't too much of an issue because I can just get XP for a tenner, validate it with Microsoft and then get a student upgrade onto W7-Ult for �60. So �70 in total, I'm fine with that. But do I need a new hard-drive too? Or can I rescue everything I already had?
View 3 Replies
View Related
Aug 30, 2012
I just installed Windows 7 Ultimate on my Dell Optiplex 755. It originally had Windows Vista Business. 64 bit OS. After Win 7 Ultimate installed I immediately want to access files or folders and I'm hit with a Explorer.EXE
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.So after doing some research I re-installed a second time this time formatting the drive first. Then installing Windows 7 Ultimate. As soon as I get to the desktop I received the same error as mentioned.
View 4 Replies
View Related
Feb 6, 2011
I can neither download files from internet nor Windows player runs properly after installin Windows7.
View 1 Replies
View Related
Apr 22, 2011
I am unable to download windows updates KB2524375 and KB9478321 for my windows 7 home premium. I have downloaded Hot Fix KB947821 but still get error. Log shows MUM 0X00F0900. Its seems that I have a registration problem but my windows was downloaded on my new acer computer. These are the only updates I have been unable to install.
View 2 Replies
View Related
Mar 4, 2012
Had a bad storm last night, so I shut down the comp. Restarted this a.m. tried to stream the Arsenal match and mozilla would crash every time I tried to leave the home page. Went to IE, watched the match, and then began to TS moz. After a bit I decided to unistall. Upon trying to reinstall i get a corrupt file error msg during extraction. I then tried to d.l. Chrome and had problems w. that too. Yet amazingly enough, IE works fine. Is this Microsoft just f'in w. me 'cause I'm not amused?I also notice that in my start menu I have no quick select icons for network connections, control panel, etc.
Mobo: Biostar A880GU3
CPU: AMD Phenom II 965
GPU: ATI HD 5770
PSU: Corsair 750w
RAM: 4GB (2x2) DDR 3
HDD: WD 320gb
OS: Win 7 Pro 64bit
View 2 Replies
View Related
Apr 12, 2012
I've just recently purchased a generic wireless mouse from eBay. more specifically, this one: 2.4GHz USB Receiver Wireless Optical Mouse F PC Laptop | eBay it doesn't work. I'm running Windows 7 64bit and it started installing the drivers, first it was installing "HID Wireless Mouse", then it switched to "USB Input Device" but failed after 3 seconds. now it's listed in Device Manager as "USB Input Device" with yellow sign that indicates it doesn't work. I tested it in 2 other Windows 7 32bit computers and it works just fine! installing drivers and everything. moreover - I testes my bro's logitech wireless mouse on my 64bit Windows 7 computer and it works fine. I think Windows fails on recognizing it. I mean the drivers are there.. the Logitech Mouse works but mine doesn't.. how do I make it work?
[URL]
View 9 Replies
View Related
Oct 28, 2011
Formatted Windows 7 loads shows Win 7 Logo and Screen blank with cursor
I have an Acer laptop 4551, got hit by nasty viruses and on top no restore intact.
I formatted the hard drive which gave me an error 83% and stopped. Today I turned on laptop to install fresh genuine Windows 7, I popped in the DVD and done everything in BIOS selected Boot from CD. Everything was Ok I hit enter to Continue then comes the Windows 7 logo and after that a blank black screen with Cursor, that's it! I done that some 5/6 times but no luck.
View 1 Replies
View Related
Dec 5, 2012
I have a lenovo pc 9210 all diags pass all hardware is good. was running xp fine loaded vista ok loaded windows 7 32 bit runs ok, needs windows 7 64 bit...loaded windows 7 64, reboots after load begins first time setup then completes as normalreboots ....and hard drive light blinks .... then starts to start windows 7 but gets the four colored dots then just sits there no more hd lights no , no nothing.
View 2 Replies
View Related
Aug 14, 2012
I transferd all of my music files from my old laptop whih is a toshiba windows vista. Most of the files have the artist, album and genre. Howvere, when i view them on my new laptop a lenovo ideapad iwndows 7, it isn't showing the properties for most of them...some yes...but very few. i just dont get it. I tried t save to a hard drive and then save to the new comp and to save to a flash drive and upload...same result both ways. I dont want to have to go through all 2000+ musc files and reenter all the properties..
View 7 Replies
View Related
Jan 28, 2011
After i press any key to reboot from DVD, the windows is loading. But when it reach to the screen where we suppose to select language, currency & time format and keyboard layout, the screen become stuck. Mouse cursor doesn't appear and keyboard also not available to use.
View 6 Replies
View Related
