My Windows 7 Ultimate 32bit OS got messed up so I restored the original image I made from DriveImage XML successfully. Now when my PC boots, I get the mobo splash screen and then just a cursor. When I put my Win 7 install disk in I can "press any key" to boot from it and the DVD goes right to where I can repair my installation. It sees my partition and when I use the cmd prompt using diskpart, I can see that the win 7 volume is c:, active, and all my files are in the right spot. However when I look at the volume numbers, my c: is volume 2 and my DVD drives are volumes 1 & 2. So how do I change my c: drive to volume 0? I've read that this is how you set the c: to boot properly.
My Windows 7 Ultimate 32bit OS got messed up so I restored the original image I made from DriveImage XML successfully. Now when my PC boots, I get the mobo splash screen and then just a cursor. When I put my Win 7 install disk in I can "press any key" to boot from it and the DVD goes right to where I can repair my installation. It sees my partition and when I use the cmd prompt using diskpart, I can see that the win 7 volume is c:, active, and all my files are in the right spot. However when I look at the volume numbers, my c: is volume 2 and my DVD drives are volumes 1 & 2. So how do I change my c: drive to volume 0? I've read that this is how you set the c: to boot properly.
The Win 7 drive is a WD 500gb IDE. When I put this drive into any other PC, it does the same thing. Mobo splash or POST screen then just a cursor. I can't enter Safe Mode or anything except to put a disc in the DVD drive and boot from it. I tried fiddling with my mobo settings and they are normal. If I take my Win 7 drive out and put it as a slave or as a USB external drive, I can see everything and do whatever with the files.
My Windows 7 Ultimate 32bit OS got messed up so I restored the original image I made from DriveImage XML successfully. Now when my PC boots, I get the mobo splash screen and then just a cursor. When I put my Win 7 install disk in I can "press any key" to boot from it and the DVD goes right to where I can repair my installation. It sees my partition and when I use the cmd prompt using diskpart, I can see that the win 7 volume is c:, active, and all my files are in the right spot. However when I look at the volume numbers, my c: is volume 2 and my DVD drives are volumes 1 & 2. So how do I change my c: drive to volume 0? I've read that this is how you set the c: to boot properly.
My Old HDD crashed, it had windows 7 x64 on a D: logical drive with an extended partition. My old HDD also had two other primary partitions one of which probably had some system/boot files etc,. I do not have a backup of these two primary partitions, however, I do have a paragon backup of my logical drive D: extended partition. I got me a new HDD, created a new NTFS primary partition with a drive letter C:. I then restoed the paragon backup of my windows D: drive on to this new primary C: partition. Now, I am not able to boot windows 7. Seems like I need to create a new system partition with boot files to be able to boot my Win 7.
I created a system image on an AHCI system, then I replaced the hard drives & re-imaged the system. Now Windows won't boot in AHCI mode, it has to be it IDE mode. Why is it not booting in AHCI mode?
My sister was on my laptop, when the screen froze, she pushed the power-off button to turn it off. When I tried to restart it later, there was this green screen giving me the option of making a backup or to restore. I chose to restore, and after that was completed, my computer would load normally, except now it says msn "stopped working" and when I go to my homepage (google) it loads normally, but when I tryto search something, it says Internet explorer stopped working and tells me to close the program.
I have restored 7 Ultimate from backup, HDD crash. Only thing, it will not sleep/suspend. I have tried tweaking the power options to no avail. Thought it may be Crap Cleaner deleting a registry key but restoring reg from backup, then rebooting did not work. When I hit sleep it justs goes to logon screen, if I deselect password on resume it just dims screen & dumps at desktop.
I periodically create a disk image of a RAID 1 Volume consisting of two 500 GB SATA drive containing my Windows 7 system and data, and a RAID 0 Volume consisting of of three 320 GB SATA drives containing my Windows Vista. I tried to do a recovery from the disk image, but my VISTA volume does not restore. Is there anyway to restore both volumes? The recovery indicates the both volumes are to be restored, both only the Windows 7 volume is restored.
After restoring an image made with Clonezilla that used to work, Windows 7 is unable to start. When prompted, I used the DVD, but it still fails with "Startup Repair could not detect a problem".When rebooting, it says "Windows Error Recovery: Launch Startup Repair (recommended) and Start Windows Normally": Launch Startup Repair fails with "Windows Boot Manager: 0xc000000e The Boot selection failed because a required device is inaccessible".FWIW, to investigate, I deleted both partitions (#1 to hold the OS, #2 to hold images) and re-created them with enough space to hold (#1 was made a bit bigger because I didn't know how to specify infos in cfdisk accurately), and Clonezilla happily restored the image.
My laptop died but the HDD was okay. I've taken the laptop HDD out, bought an USB/caddy for it and attached it to another laptop as an external drive.The trouble is the new machine sees the external drive, but all its seeing is system reserved and the reserved part of the HDD is tiny. So its not the total drive size and defintley not the data I need to rescue. How would I see the whole drive and access the data?
I restored my friend's HP Vista desktop to factory defaults. When I attempted the first round of 91 Windows Updates, 50 of them came back as Failed to Install. I thought maybe the Recovery went bad, so I re-did the recovery to factory defaults. I was able to install half of the updates, (I decided to do half at a time), but now it is locking up at random times. I ran the Windows Memory Diagnostics, found no errors. I ran chkdsk /r from a command prompt, it found no errors. Any ideas where to look next? I'm thinking to open it up and look for swelled up capacitors
I am running Windows 7. I had an old .tex file (from about 6 months ago) in the recycle bin that I wanted to restore. I right-clicked on the file and selected restore. Now, I cannot find the file anywhere. I searched on the date, name,
my aunt restored 2 deleted files from the recycle bin but she claimed she couldn't find them in the original location where they were deleted. She couldn't quiet recall the names of the files except that they were .pptx files.
Due to needing to clean C drive and re-install Windows, I backed up just the user profiles to an external hard drive using the Windows 7 utility. I have restored the profiles using the same utility but the profile names and logo's do not appear on the welcome screen. I can see the files and folders in Explorer but I thought that the profiles would be automatically re-created. Have I missed something?
Incidentally, when I reloaded windows I created an Admin profile for setting everything up and did not use my actual profile name.
I have a Lenovo B560 with Windows 7 x64. Sequence of events: Played music from a WD external HD with WMP. Music stopped playing and a terrible constant sound is coming out of the speakers (which began a year ago and happens sporadically), no other programs running besides WMP.2. BSOD appeared while the noise kept going, so I held down the power button to turn off the laptop before reading the error message.
I'm trying to repair my Windows 7 ultimate installation. When the procedure reaches its final step, I keep getting a message that the repair failed and that my system is being restored to its former state.Is there a way to depict the cause of this failure? Does Windows 7 keep a log? Is it accessible?Do you know of any other method to overcome this obstacle?
My Win7 HP x64 PC has two hard drives, each partitioned into two volumes:
My C: and E: drives are each half of a 200GB drive, both NTFS. My D: and F: drives are each half of a newer, 1TB drive, both NTFS. My F: drive has around 400GB of 'stuff' that I want to preserve.
I've been trying to migrate the win7 installation from C: to the first partition of the 1TB drive with two different tools (Norton Ghost and the built-in Windows backup utility) and both fail identically.The backup procedure itself appears to work in both cases.Restoring the backup to the first partition of the 1TB drive "works" in so much as I don't get any errors either way.Creating the requisite boot structures also work, as the O/S appears to be bootable.However, when the restored O/S makes it to the login screen, two flaws are evident:
1. The keyboard absolutely does not work.
2. If I log in on an account that doesn't need a keyboard (no password), I see "Loading desktop", then a few seconds "Logging out" and I'm back at the login screen.
If I look at the event viewer logs (booting up with the O/S on the smaller drive), I see numerous events like this:"The AVGIDSAgent service failed to start due to the following error: The system cannot find the file specified.""The Windows Live ID Sign-in Assistant service failed to start due to the following error: The system cannot find the file specified."
I just installed a new hard drive after my previous one failed to start up. I have a backup image stored on an external WD Passport. The install went well. I turn on my tower with the Windows 7 recovery disc in, start up System Image Restore and plug in my Passport. The system restore recognizes my Passport and when I go through the wizard to reformat and partition the disk to match the layout of the recovery image, I get an error message saying "The system image restore failed. No disk that can be used for recovering the system disk can be found. *hyperlink* Details."Details states, "No disck that can be used for recovering the system disk can be found. Try the following: 1) A probable system disk may have been excluded by mistake. a. Review the list of disks that you have excluded from the recovery for a likely disk. b. Type LIST DISK command in the DISKPART command interpreter. The probable system disk is usually the first disk listed. c. If possible,, remove the disk from the exclusion list and then retry the recovery.Tried that, my disk is not listed as an exclusion.2) A USB disk may have been assigned as a system disk. a. Detach all USB disks from the computer. b. Reboot into Windows Recovery Environment then reattach USB disks and retry the recovery.
I had just restored my laptop to a backup that I had created when I just bought it. But now after the Starting Windows screen it says " Setup is starting up services " and it just stops there. I waited for hours and nothing has happened. What should I do?
having a total nightmare with my laptop, Ive had it for about a year and for some reason whenever I tried to download files/applications it would come up "curupt file", after a very long time trying to look for answers, i decided to save all my files and I used system restore and wiped everything off my laptop and restored the laptop to "factory settings".After doing this I tried to download firefox and then "invalid digital signature" poped up underneath the download, so i ran the file anyway and "curupt file" appeared.I tried downloading google chrome and the same thing happend, its happens to everything now that i try and download seems what I can do, also I was toled to try and download mulwarebytes, but everytime i try and download it the same things happens.
I recently restored my computer to factory settings after getting many blue screen messages. I thought that restoring the laptop to factory settings would help to fix whatever the problem was. After restoring my computer, I get a message saying 'Setup is starting services', and then a pop up saying 'Windows could not complete the installation.To install Windows on this computer, restart the installation.'
When attempting to upgrade from Windows Vista to Windows 7 the upgrade attempt may fail with the message “This version of Windows could not be installed, Your previous version of Windows has been restored, and you can continue to use it." However, the next reboot of the machine will launch the upgrade process again only to fail with the same message.
So a couple of days ago, my PC started hanging up on a "Please Wait" loading screen in between the "Starting Windows" screen (where the Windows logo forms from coloured orbs) and the user account selection screen. Sometimes I'd leave it half an hour and it still wouldn't load.To start with, I simply gave my PC a hard reboot, and the problem would go away. When this stopped working, I system restored, and then the problem disappeared. This morning however, I performed a system restore from safe mode, and now when I boot my PC, in whatever mode, I get the "Starting Windows" screen, then the PC hangs up on a black screen with only the mouse pointer active.
I'm fixing my sisters computer, It froze on her, when she tried to start it up again it went into some sort of system repair mode and after about 20hrs of this (no joke) it gave me the option to restore the computer to factory settings, it also gave me the option to install some sort of backup on the hard drive, however i tried this and it said there was no room on the hard drive (if i didn't know any better I'd say the problem was with the hard drive) i went ahead with the system recovery as it seemed to be the only way to fix the computer (i know i sound like an oaf) now the computer is showing me a screen which states that i need to insert my windows installation disc, however the laptop has no disc drive!
Additional information
HP Pavilion dm1-4004sa AMD Dual-Core E-450 processor 4GB memory 320GB Hard Drive
I cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered) Path: Windows Windows Device: Partition=C: (476938MB) Name: Windows Recovery Environment (recovered) Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found: No OS files found on disk. Repair action: Partition table repair Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.
My Windows 7 has stopped booting after a restart, the system would just endlessly play the boot animation and not boot properly... system restore won't work, startup repair won't work, chdsk and sfc won't work. I have yet to try and see whether a Registry fix works. Windows loads the WRE VERY slowly.
