every time i'm doing a restart to my computer i see on the network icon next to the clock a yellow triangle that indicate on a problem. when i open it i see "no network..."
in order to fix it i need to DISABLE & ENABLE my network card and after this step the connection is back & i have internet. Someone know why i have this problem & how to fix it for good?
the screen going on the fritz only when playing a video. i have not tried playing a video on vlc or wmp to test this but it seems almost every time a video pops up on a website, or if i go to Internet, my screen goes crazy.per the other thread, i swept my old drivers and re-installed the newest (which was 12.9 beta) and everything is ok, cept these videos. to fix it, i have once or twice gotten lucky and been able to hit escape and it goes back to normal. otherwise, i have to hit the power button and make it go into sleep/lock mode. i have a second monitor hooked up and it doesn't do what monitor one does, which is very odd.card is xfx radeon r7770 ultra overclocked black edition (factory overclocked)p.s. tried to use the uploader for pic and it wasn't working for me at all. tried to use imgur also, said it was down for maint.
I have a computer with a P4MST890 Pentium D 3.0GHz, 9800GTX+ and a 500GB SATA. When I put Windows 7 on it the first time it worked perfect and I restarted it a few times and it loaded each time but the next morning I turned it on and it would fall into a reboot loop. If I remove the Graphics card and use the onboard card it works fine. This has really puzzled me on what could make it do that because it worked the first time with it in there.
My son has a problem on his PC where everytime he starts up his computer or reboots he can't connect to the internet and the little network icon in the corner of the screen has a yellow warning sign. If you disable the network adapter and then re-enable it then the problem goes away.
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
I have a laptop with a Intel N6230 wireless card which I'm having a strange issue with. I can be connected fine to my wireless network but if I perform a reboot the laptop 'connects' to the network however has no internet access (nor can I access the router via its ip address).The only way i can get it working again is delete the wireless adapter via the device manager, let windows re discover and install it, and all is fine again - nothing else is required. It continues to work fine until I shut down and reboot where it drops again (sleep modes or hibernation do not cause any problem).
I have two NIK's onboard the MB I thought had given out so I installed another in a available PCI slot.They work if I go into Device manager and remove them, then scan for new hardware, the drivers automatically install and it works, but when I reboot they no worky until I do the above step. [CODE]
I'm running 7 Home Premium 64bit on an HP box we got about a month ago.
Lately, when I restart the system, I can't get any internet connection. I can access shares on my home network, so the nic is working and I'm getting an ip address from my router. If I disable and reenable the nic, the internet connection works again. I've tried disabling firewalls and things like that, but the only thing that fixes it is the disable/enable.
The network "troubleshooter" can't see anything wrong, and everything looks like it's configured properly, and nothing has been changes since the initial setup. It worked fine for a couple weeks and now doesn't.
Anyone seen this before? Hints? The disable/enable isn't a big deal but I know at some point I won't be home and my wife will have a problem and I'd rather not deal with that!
I have a wired network that has the following connected:1) My Main PC (Quad Core) with all the Shared HDD's (Windows 7 Ultimate 64bit)2) My Wife's PC (HP Touchsmart) Windows 7 Home Premium 32bit3) WD TV LiveHub (Media Player)4) WD TV Live (Media Player)5) My Second PC (Windows 7 Ultimate 64bit)6) My Third PC (Windows 7 Ultimate 64bit)and occasionally my laptop which has Windows 7 Ultimate 64bit and Ubuntu 10Often my ADSL connection drops and I have to restart my router to get it running.Once I do that, and My Main PC is on AND any other PC is on too, the network shares disappear. If I go to "Network" on any PC only the Media Servers are shown and if I go to the Media Players, no shares are shown.If I turn off all other PC's and THEN restart my main PC all shares appear again.I have been searching the Internet but haven't found anything that worked.
So, I have a class "A" IP Subnet in my home and a class "C" subnet. one is outside the "corporate" firewall and one is inside. My Laptop wireless always loves to obtain the 10.0.0.1 which is the ISA router/firewall. Obviously there is an IP conflict here because the TMG/ISA server/GATEWAY already has that..
This only happens after a reboot and the IP settings that it "desires" are the following: IP: 10.0.0.1 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 DNS: 192.168.1.1
It should be.... IP: 10.0.0.101 Subnet Mask: 255.0.0.0 Gateway: 10.0.0.1 DNS: 10.0.0.4 = MY DNS DNS: 10.0.0.5 = MY DNS
Should I delete the network controller, or do I have to delve into the registry to get this crap sorted out? The Laptop ALWAYS connects to the N router but has a problem assigning the IP where it will just assign a bad IP or "first ip" in the sequence. There are times that I need to get beyond the firewall, and I need to assign it a class "c" but I don't understand why this should be having a bearing upon future connections. I have repeatedly reset the "arp" and DNS; to no avail.
I have typed this command at my last chance: "netsh int ip reset c: esetlog.txt"
Windows tells me that I am connected to the network but I do not get internet access after turning the pc on, waking it from sleep or restart. However, if I disconnect from the network and reconnect I have internet access immediately.
I have Win 7 ver 6.1 (build 7600) on Desktop and I have a Linux server. I don't use a password to logon to windows.
I successfully mapped Linux drives using my Linux user (which happens to be the same as the windows user) but on Linux I have a password. All the mappings were OK (4 directories) asking me on each one username + password + ticking the box called "retain credentials".
All went OK until I rebooted, then a message pop-up that "could not reconnect all network drives"...appeared: => the old stupid message from win XP.
Ok I opened My computer and surprise: My user and my password from the sharing pop-up window were gone! I've inserted them again and all went OK.
I thought they solved the old windows XP problem which clears the user + password from the Network drive mapping IF you do not have the SAME password as the mapped drives.
What can I do to retain that User+Password combination for good in Win 7 Mapping?
I've been having this problem ever since Windows Vista 64bit, a problem I've been trying to find a solution to for the last 3 weeks. It's REALLY frustrating to realize that the problem was the network card. I was using a RT2561 branded as a Sabrent wireless card. This card would work fine in normal use, downloading, but when it came to uploading or anything JAVA, it would crash and hardlock the computer. So I thought it might be the OS, then I installed Windows 7 and I still have this problem, even after switching hdds/memory. The problem lies within the network card because once it's removed, theres no crashing.
So I want to ask, what wireless network cards do you guys use that work with Windows 7 64bit. I know there are a few RT61 chipsets out there (Linksys WMP54G) but the RT61 doesn't work well with my machine as it has more than 4GB of memory (article: Ralink RT61 or (RT256x/RT266x) causes freezing Windows 7 x64)
Sad but funny, I went to the store to buy a bunch of network cards to try, and low and behold, most of them use the RT61 chipset . Unfortunately, my location doesn't permit any wired connection. What network cards have you guys found compatible? Do you have 4GB Ram+?
Card is a 3com pci card - 3Com EtherLink 10/100 PCI NIC (3C905-TX).
Now, I have just decided to go 64bit, and all is installed driver wise aside from this card.
So, I have just downloaded a 3c90x1.exe package, (the site I have it from suggests it is 64bit compatible), but when I try to run the exe i get an error suggesting that it is not compatible with the version I am running.
Can anyone offer any suggestions on this please. or a location for a verified working 64bit driver?
Hi guys a couple of months ago I tried Windows 7 but I had to change back to vista due to a Asus P5K inbuilt network card problem, for some bizarre reason it would restart my computer randomly when using anything heavy on bandwidth.
Does anyone know whether or not this has been solved?
I have recently installed windows 7 (64) and wanted to put more RAM in. I started off with 2Gb and added 1 Gb of ram to make 3Gb (No problems Here). I then added another 2Gb of ram bringing it up to 5 Gb (Now the fun begins!)
Windows 7 runs fine and I can play games with the 5Gb...but... I can't seen to get on the internet! It comes up saying unidentified network! I take out the 2Gb and everything is ok again and i can get back online and everything.
I was told to make sure all my drivers are updated which I did and they are all up to date.
we just installed window 7 and it's not comaptible with DWL-G510 pci network card(Dlink) it needs a driver upgrade and can.t find one , anyone can help what to do?
When I start the computer, everything goes fine until the OS starts loading network connection. I get the "device plug in sound" and then everything freezes completely. I have to wait about ten seconds and after "device unplugged sound" the computer works, but only for five second or even less. This continues for about 10-20 minutes every time I boot up the computer.
The problem does NOT occur if I plug of the lan cable. That is not the solution though because the problem continues immediately after I connect the lan cable back. I have tried system restore, installed different network drivers but with no luck. What could be the problem, maybe it is some hardware problem?
My brother has a laptop - wireless network card just stopped . I am going to:
1. Uninstall network card and reboot to see if the system picks it back up. 2. Update the drivers. 3. Check for Malware.
If they don't work then I'll do a restore point.If all the above doesn't work what would you suggest before getting a new network card - presuming it can be replaced and not an on board type ?? System recovery ?
Each time i load up my computer everything is running nice and smoothly when i start to open up alot of things that uses internet (or simply play a game) all of a sudden my network card dies and starts saying "An Ethernet cable is not plugged in" blah blah. Anyways the cable works 100% I've tried about 6 different cables all resulting in the same thing..
I've tried updating the driver that still didn't fix
I've tried uninstalling the network adapter and reinstall didn't fix it
I've disabled Ivp6 thingy still doesn't fix it
I'm connected to a Router/homenetwork using a REALTEK PCIe GBE Family Controller and computer specs are in my profile.
Each time I put the PC on, I can't use Internet before I deactive then reactive the network card. When it's run fine, I have a domestic network but when I start the Pc I have two networks, the domestic one and a new public one.
As soon as I desactive - reactive the network card, the public network desappear and all is ok as long as the PC stay on..
I'm a brand new user of Seven so perhaps it's just a simple tune I didn't do..
I'm having problems with my wireless networkcard. Sometimes i can connect to the Internet with it but at other times, I am simply unable to connect. Windows detects that there is a problem between my computer, the router, and the Internet. There are five other devices in my house that are able to connect flawlessly. I am currently only able to connect using a wi-fi adapter but this soultuion is awkward as i have only two available USB ports.
i just built a brand new pc, and installed the D-Link DWA-510 network card.
I put in the D-Links DVD and click install drivers. It then comes up with an error saying i ineed to install the network card when it is installed just fine!
I am running Windows 7 64-bit and think the problem may be itisn't windows compatable.
The computer device manager shows that with the wireless network card is okay, and drivers and everything ok, but the network settings show that the wireless network card is disabled. Network card can not be enabled. I tried with several wireless network cards, nothing changes. The problem arose after the computer's motherboard replacement. Everything is working as before, except for a wireless network card.Where would be a problem in Windows
Win7 as a host for VPC - Network card not recognized. I've just installed VPC over Windows 7 7077 but on the network settings I cant choose my LAN connection, I only have the option of Shared NAT?
Is there any problem reported regarding this subject?
I have a D-Link AirPlus Xtreme G+ (DWL-G520+) network card but after installing the Windows7 Release Candidate, can't get any drivers to work for the card.
Does anyone know of any drivers or firmware that can sort this? Can't see anything on the D-link site and tried both the latest G520 and 520+ drivers (they don't show anything for G520+)
It is the 64bit version i have downloaded - ordered the Home version, but that's not released until October in the UK.
I would like to reduce the speed of my 1Gbps network card but cannot change auto negotiation. There are no speed & duplex options other than "auto negotiation." How can I enable the normal options in the "speed & duplex" field?
I have a network card that doesn't have a Windows 7 driver but some googling dug up a driver that made it work with a side affect of freezing the computer every now and again. Maybe once a day max.
My problem now though is it randomly decided to go haywire today. The computer won't last more than a minute now without freezing. I have it disabled at the moment so I can use the computer but whenever I try to enable it again, it's frozen about a minute later.
I didn't change anything, didn't do anything at all, it just started happening. I'm not sure what to check, what to do at all really since it was working fine before.