Map Network Drive Fails To Retain Password After Reboot
Dec 21, 2009
I have Win 7 ver 6.1 (build 7600) on Desktop and I have a Linux server. I don't use a password to logon to windows.
I successfully mapped Linux drives using my Linux user (which happens to be the same as the windows user) but on Linux I have a password. All the mappings were OK (4 directories) asking me on each one username + password + ticking the box called "retain credentials".
All went OK until I rebooted, then a message pop-up that "could not reconnect all network drives"...appeared: => the old stupid message from win XP.
Ok I opened My computer and surprise: My user and my password from the sharing pop-up window were gone! I've inserted them again and all went OK.
I thought they solved the old windows XP problem which clears the user + password from the Network drive mapping IF you do not have the SAME password as the mapped drives.
What can I do to retain that User+Password combination for good in Win 7 Mapping?
View 0 Replies
ADVERTISEMENT
Jun 26, 2012
I currently have an HP Pavillion G70 that has some broken hardware (hinges for screen) but other wise works fine. It's running Windows 7, Ultimate - 32 bit.
I'd like to buy a used version of the same PC model and simply swap the hard drive from mine into the purchased PC.
Will this retain all the programs, settings and files? Or are there some things that are tied to the motherboard or other hardware devices.
View 1 Replies
View Related
Oct 30, 2012
i want to set passWord for protective my sharing drive. I wat to set password when other user enter my drive after giving password. we are using windows xp.
View 2 Replies
View Related
Dec 31, 2009
I have set up a Windows 7 machine that shares out a hard drive as a network share along with printers to our network. On another computer I was mapping the network drive and accidentally entered the wrong credentials (wrong user name) and choose the remember credentials setting, and it would not let me map the drive.
I tried to go back in and remap the drive again but Windows is remembering the user name/password and I can't map it. I can map the drive from any other computer just fine. Does anyone know how to make Windows forget the credentials so I can map the drive?
View 9 Replies
View Related
Feb 2, 2013
I have 2 computer's, my netbook and my main computer. I have these setup on the same network using LAN. I created a network drive on my main computer and would like to access it on my other computer but it always asks me for a password when i try to map the network on the computer that i am trying to share it to. I have not set any passwords on the computer that is hosting the network drive.
View 3 Replies
View Related
Sep 5, 2009
just got Windows 7 ultimate, i got it with an admin/admin account, created a new admin account, and then deleted the old one, also changed the computer name etc...
one weird thing happens im not sure if its related... When i lock the computer, or gets locked by screen saver etc, when i try to logon it gives me incorrect password, i then click switch user and type my password and its ok..
happen to anyone?
View 9 Replies
View Related
Dec 30, 2011
I have Windows 7 Home Premium, 64 bit system, over 250gig free on Hard drive and 8 gig RAM. For whatever reason, This Windows 7 does not go back on earlier RESTORE points that I know I had set months ago....Is this a general problem with windows 7, or is there something that is not configured correctly, for Windows 7 to retain prior months restore points. What can I do to ensure restore points are created and kept for an extended period of time, given that I have plenty of Hard Disk space?
View 5 Replies
View Related
Oct 26, 2009
Something I like and can't seem to get Win 7 to do for me. I open a window for my computer, size it and set it at the upper left of my screen. I open folders in new windows; i.e. open the D: Drive and position it next to the window I opened for my computer. Close both. When I open my computer again it is now in the position where I opened the D: Drive. How do I get specific windows to retain the size and position I set each time I open them rather then simply pick up the size and position of the last window I opened?
View 5 Replies
View Related
Jan 11, 2012
This issue is happening on a Workstation PC with Windows 7 Pro 64-bit....the last software update before login crash was Trend Micro corporate Officescan if that helps at all.
View 5 Replies
View Related
May 6, 2009
my Lenovo S10e Netbook features a Broadcom 802.11g Network Adapter Hardware ID DEV_4315 wich used to work perfectly under Windows 7 7000.
After having installed the RC it sais the driver could not be initialised. Deleting and restarting etc. did not help, Winupdate sais: driver is up to date.
Searching Broadcom's website left me even more confused..
View 0 Replies
View Related
Sep 10, 2009
I tend to bring my personal laptop to work as I usually use it when working remotely.
I can find the printer and install it but I cannot print, even the test page fails.
I figured out that this is because my personal laptop is not on my company domain. However, like for any other shared resource such as a network drive or accessing our exchange server, I would expect to be asked for my credentials so that I can connect to the printer.
Cna this be done? Is there a way to print from my personal laptop to a network printer on a domain?
View 4 Replies
View Related
May 19, 2011
Untill yesterday my homegroup was working just fine. Two laptops / home premium / windows 7.Now when I try to access it I am prompted for a Network user name and password, the same promt giving details of my domain. This is not my homegroup password, I know where and how to find / use it. I have renamed pc's tried setting up homegroup again etc etc. Incidently I cant change the share options on any of my folders now, they are all locked to 'Nobody'.Can anyone help as it appears to have support from Microsoft for their product I'll have to pay pardon my igronance but if I sold a product with constant updates I wont charge for the support.
View 9 Replies
View Related
Nov 19, 2009
I've always thought of networking as one of the black arts.
4 PCs - One Vista, 2 Windows 7 Home Premium, 1 Windows 7 Ultimate. All see each other. All have appropriate folders shared.
Try accessing A from B and I get "Enter Network Password (to connect to B)". I never set one up to start with, so why is it asking me for it. How do I access/change something I never set?
Try accessing B from A - I see the PC, and the folders I want but trying to access them results in "You do not have permissionto access folder names Contact your network administrator - who he? Obviously me but I don't know what the answer is!
Trying similar things with the other two PCs in the mix results in various permutations of the same problem.
I have tried all the various links suggested through Networking and Help, but most of the actions seem to be boxes to click to make the PCs try to sort themselves out. When it fails I can't find a manual way of trying to sort it out.
Any suitable tutorials that may help? Couldn't see any.
View 8 Replies
View Related
Jan 30, 2013
My Windows 7 laptop works Fine at home on my broadband with a wired connection, When I take my laptop downtown and try to connect to a company network, via a wire, windows 7 fails to find the connection.
View 1 Replies
View Related
Feb 6, 2013
My son has a problem on his PC where everytime he starts up his computer or reboots he can't connect to the internet and the little network icon in the corner of the screen has a yellow warning sign. If you disable the network adapter and then re-enable it then the problem goes away.
View 4 Replies
View Related
Jul 9, 2012
Last Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details
Model: Packard Bell Power x-30
Processor i7 870 @2.93GHz
RAM: 8GB
O/S: Windows 7 Home Premium (64-bit)
Modem Router details
Netgear N300 Wireless Dual Band ADSL2+ Modem Router
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly
IP address 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
And therefore forced to set the DNS Server address too
Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
View 2 Replies
View Related
Mar 5, 2012
I have a laptop with a Intel N6230 wireless card which I'm having a strange issue with. I can be connected fine to my wireless network but if I perform a reboot the laptop 'connects' to the network however has no internet access (nor can I access the router via its ip address).The only way i can get it working again is delete the wireless adapter via the device manager, let windows re discover and install it, and all is fine again - nothing else is required. It continues to work fine until I shut down and reboot where it drops again (sleep modes or hibernation do not cause any problem).
View 4 Replies
View Related
May 2, 2011
I have two NIK's onboard the MB I thought had given out so I installed another in a available PCI slot.They work if I go into Device manager and remove them, then scan for new hardware, the drivers automatically install and it works, but when I reboot they no worky until I do the above step. [CODE]
View 9 Replies
View Related
Jun 3, 2009
every time i'm doing a restart to my computer i see on the network icon next to the clock a yellow triangle that indicate on a problem. when i open it i see "no network..."
in order to fix it i need to DISABLE & ENABLE my network card and after this step the connection is back & i have internet. Someone know why i have this problem & how to fix it for good?
View 9 Replies
View Related
Aug 7, 2009
Every time I reboot I have to reconnect to my wireless network. Any ideas? No problems after manually reconnected.
View 0 Replies
View Related
Nov 25, 2009
I'm running 7 Home Premium 64bit on an HP box we got about a month ago.
Lately, when I restart the system, I can't get any internet connection. I can access shares on my home network, so the nic is working and I'm getting an ip address from my router. If I disable and reenable the nic, the internet connection works again. I've tried disabling firewalls and things like that, but the only thing that fixes it is the disable/enable.
The network "troubleshooter" can't see anything wrong, and everything looks like it's configured properly, and nothing has been changes since the initial setup. It worked fine for a couple weeks and now doesn't.
Anyone seen this before? Hints? The disable/enable isn't a big deal but I know at some point I won't be home and my wife will have a problem and I'd rather not deal with that!
View 2 Replies
View Related
Sep 10, 2009
So, I installed windows 7 ultimate with 2 drives. I'm running on a MB with an AHCI (ICH10R SATA controller - No extra drivers needed. Windows 7 sees the drives fine during install). It did the normal thing on 1 drive of making a system reserved partition with all the bootmgr and BCD stuff. I'm not able to mirror it. But, I was able to mirror the main installation partition.
Forward a few days - Drive 1 (the one with the "System" (BCD and bootmgr) and the main installlation) dies. Now I have another drive with just the main installation. Of course, I can't boot anymore.
OK, I think - I'll add the missing boot files to the still working drive. I boot the install CD, go into a CMD prompt. Break the mirror, and make the working partition standalone. I copy bootmgr onto the drive's root, create a "Boot" folder. A run diskpart and mark the partition as active. I run bootrec/rebuildbcd (which works and finds my installation), bootrec/fixmbr (also works) and bootrec/fixboot (also works). Great, so now I can boot?
Wrong. I just get a blinking cursor on trying to boot. I've run through the GUI repair, and still no go. I cannot figure out what's missing.
So, the bottom line is - If you're using a mirror thinking you're safe - Think again. Your data will be safe, but forget ever booting that installation again.
View 8 Replies
View Related
Dec 7, 2009
I'm trying to install Windows 7 on a WD 500gb freshly formatted to NTFS. Windows 7 first copies the files and then says its starting up and then hangs up. My bios see's the hard drive and knows it's there. I never get a chance to use F6 to load the Sata drivers that I have on a floppy drive.
It never asks me. I first tried to load with the Sata Drive unpartitioned but that failed. So I am now trying to do it on a formatted drive. I'm not sure if the problem is that Windows 7 doesn't recognize that I have a Sata Drive attached. Can anyone give me some ideas for things to try?
I took the motherboard, processor, and ram back to Frys and got store credit. I changed from a Gigabyte motherboard to an Asus motherboard, same processor, and associated ram. Windows 7 loaded with no problems.
Fry's stated that the motherboard must have been bad due to the issues that I was having. The processor and ram were suspected to be good. When I loaded Windows 7 I didn't have to load any Sata drivers the bios and windows 7 picked up the Sata Drive with no problems.
View 2 Replies
View Related
Jul 20, 2011
I have a wired network that has the following connected:1) My Main PC (Quad Core) with all the Shared HDD's (Windows 7 Ultimate 64bit)2) My Wife's PC (HP Touchsmart) Windows 7 Home Premium 32bit3) WD TV LiveHub (Media Player)4) WD TV Live (Media Player)5) My Second PC (Windows 7 Ultimate 64bit)6) My Third PC (Windows 7 Ultimate 64bit)and occasionally my laptop which has Windows 7 Ultimate 64bit and Ubuntu 10Often my ADSL connection drops and I have to restart my router to get it running.Once I do that, and My Main PC is on AND any other PC is on too, the network shares disappear. If I go to "Network" on any PC only the Media Servers are shown and if I go to the Media Players, no shares are shown.If I turn off all other PC's and THEN restart my main PC all shares appear again.I have been searching the Internet but haven't found anything that worked.
View 7 Replies
View Related
Nov 7, 2011
So, I have a class "A" IP Subnet in my home and a class "C" subnet. one is outside the "corporate" firewall and one is inside. My Laptop wireless always loves to obtain the 10.0.0.1 which is the ISA router/firewall. Obviously there is an IP conflict here because the TMG/ISA server/GATEWAY already has that..
This only happens after a reboot and the IP settings that it "desires" are the following:
IP: 10.0.0.1
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
It should be....
IP: 10.0.0.101
Subnet Mask: 255.0.0.0
Gateway: 10.0.0.1
DNS: 10.0.0.4 = MY DNS
DNS: 10.0.0.5 = MY DNS
Should I delete the network controller, or do I have to delve into the registry to get this crap sorted out? The Laptop ALWAYS connects to the N router but has a problem assigning the IP where it will just assign a bad IP or "first ip" in the sequence. There are times that I need to get beyond the firewall, and I need to assign it a class "c" but I don't understand why this should be having a bearing upon future connections. I have repeatedly reset the "arp" and DNS; to no avail.
I have typed this command at my last chance:
"netsh int ip reset c:
esetlog.txt"
View 2 Replies
View Related
Aug 3, 2012
Windows tells me that I am connected to the network but I do not get internet access after turning the pc on, waking it from sleep or restart. However, if I disconnect from the network and reconnect I have internet access immediately.
View 2 Replies
View Related
Dec 1, 2011
I have 2 drives (connected one at a time to try and sort this issue) SONY AD-7260S and a LITE-ON
Now from upgarding to XP to 7 I had no issues until now... When inserting Disc (Blank or Data Files) the DVD Drive will hang and not ask what to do with the Disk and when I try to Burn the disc it will say cannot write to drive or just sit there doing nothing
Both these drives worked flawlessly with XP and only way to get the drive to recognise half the time with Windows 7 is to restart PC to either get it to show in Device Manager or press eject when booting to get the disk inside out.
Both drives are Sata and are only a few months old (not burned much and work exceeelnet on another xp machine)
View 4 Replies
View Related
Feb 12, 2012
My Dell 1525 Windows 7 laptop had begun to experience more and more frequent hard drive errors. So, in an effort to fend off total disaster, I purchased a new hard drive. The new drive was slightly larger than the old one (250GB vs 160GB). With a week old backup in hand, I used Acronis to do a disk CLONE to the new drive in an external enclosure. I was able to do it without any apparent drive errors. I then swapped drive for drive and rebooted. My most frequent apps worked fine, network access was fine, etc. Then I went to do a Windows Update - not fine. The little shield in the upper left corner of the box was red and, when I clicked on the "Check for Updates" box, it replied Windows Update cannot check for updates because the service is not running. You may need to restart your computer." I went to Services, started the service, marked it Automatic, and tried again - no joy. So, as it suggested, I rebooted. No joy again. After trying a couple of different backup versions with the same result. I went back to square one and used the original Windows 7 install disk. The install went fine and I was able to use Windows Update successfully. I hoped that having verified that a vanilla Windows 7 worked, I might be lucky enough to just be able to restore my latest backup. Wrong. The system appears to work fine with the only KNOWN problem being Update - there may be other problems, as yet unknown. Differences I am aware of: new hardware partitions proportionally larger than the previous disk.
View 3 Replies
View Related
Feb 24, 2011
I've recently been fooling around with ubuntu, and my latest install attempt did something to my local drive. I don't know what, but my drive no longer recognizes any OS (usually windows 7, 32bit) on the system at all. On boot, I receive the message:
"verifying DMI pool data .............
Boot from CD/DVD. :
Error: no such device : b2359ea5-e528-475a-819f-16885f1ed60e.
Grub rescue> -blinking underscore-"
I've tried setting boot priority to hard disk, but it doesn't work.
View 3 Replies
View Related
Oct 29, 2011
I'm doing a new OS install, using my the same Windows 7 64 install disk as before. I do have new drives, but they are just newer versions of my old drives (which died) - and they are pretty standard HP slim drives.
For some reason, the OS install will not complete. It's saying that an optical drive driver is missing, and wants me to install it manually.
these drives did NOT come with any driver cd, nor is there a driver available on the HP support site. They must be plug&play.
View 4 Replies
View Related
Apr 6, 2012
I have a PC on which the hard drive died. I had previously done the Advisor and it said everything is OK for new install of Win 7 Home Premium.
I removed old hard drive and 2 gigs of memory (now 2 gigs installed) installed new hard drive, set appropriate ( i think) BIOS parms. When I start the DVD I get the 'loading files' message and the colorful logo then a blank screen with a large arrrow cursor -- and nothing. Wait 5, 10 15 minutes and the only hint of activity is the hard drive light is flickering about once every 2 seconds. I've now waited for over an hour and still nothing else.
I've tried to do all the things that have been suggested for others who have had problems but it hasn't helped. Machine is a Dell 4700C with 3.4 GHz processor , 2 gigs of memory, only keyboard, mouse, and monitor attached in addition to the hard drive.
View 9 Replies
View Related
