I've recently been fooling around with ubuntu, and my latest install attempt did something to my local drive. I don't know what, but my drive no longer recognizes any OS (usually windows 7, 32bit) on the system at all. On boot, I receive the message:
"verifying DMI pool data .............
Boot from CD/DVD. :
Error: no such device : b2359ea5-e528-475a-819f-16885f1ed60e.
Grub rescue> -blinking underscore-"
I've tried setting boot priority to hard disk, but it doesn't work.
System configured as RAID 1 (mirror) and works well until this day. From today DVD/RW Drive Shows Up As Hard Drive! Under conmputer mannagment all drives shows correctly. I tried everything - unninstall, tried diferent DVD/RW drive, tried assign a new letter etc
I just have HP i5 mother board replaced by manufacture. Apparently it does recognizes my external hard drives (3 units).it makes sound when I plug them on or unplug, the hard drives picture or icon were not registering on my screen on "my computer". it does recognizes the flash drives with no problem. Quote :[spoiler][/spoiler]
I run Windows 7 on two of machines. One runs flawlessly. The other ran flawlessly for about a month or two, and then I started getting a rather odd problem. The OS fails to recognize my (mostly) left mouse clicks for random periods of time, say 5 seconds to like 60 seconds. It'll work, then it'll stop, then it'll work... etc. Obviously this is extremely frustrating. Thinking it's the mouse, I tried another mouse - same problem.
Both mice are USB, but it does not seem to be an issue with the USB ports as my keyboard and other USB peripherals work fine. Running the C2D Extreme Quad core from a couple of years ago, X38 chipset board, 4870x2. I formatted and reinstalled the first time this problem came up, and it started again within a few hours of the reinstall. All I've got installed besides my drivers are:
So i was trying to get my ps3 controller to work with my win 7 x64, installing some USB drivers.. when i rebooted, windows would immediately de-power all USB. nothing will even charge.. even in safe mode. I tried last known good config and nothing..
the devices work is BIOS and system recovery (win 7 cd in).
I'm not pc savy as most of you probably are, thus why I'm here seeking your expert advice. For some reason media player12 is not working. It fails to read any type of discs. My store bought cds or dvds. Nothing will play. It was working fine as I was able to burn a cd from my music files but now no longer works at all. I recently had the mother board replaced and main power source as well. Not sure if this has anything to do with it or not. All settings I went through and think they are correct but not entirely sure.All drivers come back as working and windows claims all is up to date. If anyone could assist me with this issue I'd be very grateful! Please however try to make the instructions as simple as possible as i'm not too familiar with pc terminolgy yet,
I recently installed windows 7 home premium 64 bit, previous OS was Vista home premium 32 bit. My desktop is an HP pavilion d4650y. I have the OS loaded on my main HD which is a SATA.
HD & DVD drive worked perfectly before on vista. I tested both devices on another pc with XP and they work fine. I've triple checked the connections but still the devices are not recognized by Windows 7. I've also tried renaming the HD & changing the drive letter, but still no luck.
Both drives are connected to a PCI E card, and are set to cable select, on separate cables. In the BIOS both drives show up. In disk management they do not show up at all.
My HD is a western digital 250 gb EIDE, and the DVD drive is a IDE Pioneer DVD burner (secondary disc drive).
I have 2 drives (connected one at a time to try and sort this issue) SONY AD-7260S and a LITE-ON
Now from upgarding to XP to 7 I had no issues until now... When inserting Disc (Blank or Data Files) the DVD Drive will hang and not ask what to do with the Disk and when I try to Burn the disc it will say cannot write to drive or just sit there doing nothing
Both these drives worked flawlessly with XP and only way to get the drive to recognise half the time with Windows 7 is to restart PC to either get it to show in Device Manager or press eject when booting to get the disk inside out.
Both drives are Sata and are only a few months old (not burned much and work exceeelnet on another xp machine)
I am building a computer fort the first time and I am having trouble getting Windows 7 to recognize my hard drive. My har drive and mother board are as follows: Hard drive-Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive, Mother Board-GIGABYTE GA-870A-UD3 AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard when I go to install windows 7 I eventually get to a screen where it ask for an install location, unfortunately it doesn�t seem to recognize my hard drive. It gives me an option of installing driver so I went to the gigabyte website and downloaded the drivers that it said I required. I believe there was an ACHI driver and a Raid driver. After I stalled both of these drivers the hard drive still was not detected. One strange thing I noticed was that when I browse for a driver my hard drive is listed as a place I can search. I then proceeded to the Bios to try and match the drivers. The hard drive is detected in the Bio. When the HD is set to IDE my BluRay play is able to read the windows install disc. But windows won�t recognize my HD. If I set it to ACHI or Raid I can�t seem to get the windows CD to load. Do I need an IDE driver? Out of frustration I tried installing a windows XP to see if it would be able to recognize my hard drive. It seemed to load on the hard drive fine but entered this weird loop where windows would install itself but wouldn�t actually load as the operating system. In other words when I try to restart my computer and run the OS off of my hard drive it gave me an error message. Something like (windows OS could not be located) When I went to go install windows 7 again my hard drive still was not detected as a place to intall windows but when I search the hard drive (as if I was searching for a driver) I can see the Windows files that were loaded from when I tried to install XP.
My 1.5TB USB( using the EZ-dock adapter) drive is about full, and I'm looking at a 3GB drive to replace it. My system is a Netbook with USB 2.0 as the only external drive interface so that limits my options considerably if I want to keep it to something I can throw into my suitcase easily when travelling.
I have a PC on which the hard drive died. I had previously done the Advisor and it said everything is OK for new install of Win 7 Home Premium.
I removed old hard drive and 2 gigs of memory (now 2 gigs installed) installed new hard drive, set appropriate ( i think) BIOS parms. When I start the DVD I get the 'loading files' message and the colorful logo then a blank screen with a large arrrow cursor -- and nothing. Wait 5, 10 15 minutes and the only hint of activity is the hard drive light is flickering about once every 2 seconds. I've now waited for over an hour and still nothing else.
I've tried to do all the things that have been suggested for others who have had problems but it hasn't helped. Machine is a Dell 4700C with 3.4 GHz processor , 2 gigs of memory, only keyboard, mouse, and monitor attached in addition to the hard drive.
I've been all over the net trying to resolve this issue, and found many hotfixes,downloads from Microsoft and manufacturer, but to no avail. My external drive was recognized for the first month. Then, very suddenly, Windows 7 doesn't recognize it. It sees it, but prompts a "Need to Format before first use". It has 300G already used with valuable info.Tried moving the external hard drive to our home PC with Windows XP and the same "Need to Format" message is prompted. If I hook it up on my wife's MAC, I can see the data. Now I have read that this is a known issue with the 64bit version of Windows and external drive. I have already all the KB976972 and KB977074 download fixes from Microsoft. I have also tried to uninstall the drive, unplug it, turn it off, restarting Windows, and plugging back the drive, but I have the formatting prompt again. And if I choose to not format, i have an error message DATA ERROR (CYCLIC REDUNDANCY CHECK).**This does not seem to be an issue regarding only the WD drives but all drives**Called WD tech, and it was useless. Does anyone have a fix? A link to share? An idea? I'm running Windows 7 Ultimate 64bit on my HP Pavilion a6418f.
Windows 7/IE8 & IE9 report no media in TSST corp CDDVD Writer, SH-S203B, SBO-4. However, on the same machine Nero 10 recognizes media and burns successfully. CDDVD Writer has latest firmware. Windows Update current. Computer>DVD RW Drive (D) > Properties > Hardware lists all three drives, 160 Gb Maxtor (Internal SATA HD), 500 Gb Seagate Free Agent GoFlex(External HD, USB 2.0) and TSSTcorp CDDVD Writer; should only the TSST be listed there? Device Manager reports drivers up to date, no abnormalities. Disc Management reports that "CD-ROM 0 is Online DVD." Disk Management > Properties > General reports TSSTcorp CDDVDW SH-S203B ATA Device, Location 1, Channel 1, Target 1, Lun 0 and that the device is operating properly; DVD Region 1. Disk Management > Properties > Volumes reports: Disk CD-ROM 0; Type: DVD; Status: Online; Partition Style: Master Boot Record (MBR); Capacity: 0; Unallocated Space: 0; Reserved Space:0. Disk Management > Properties > Driver reports: Driver Provider: Microsoft; Driver Date: 6/21/2006; Driver Version: 6.1.7601.17514; Digital Signer: Microsoft Windows.
For some reason my HP Laptop (Win 7 Home Premium) can't see/recognize my usb external hard drive (seagate). When I start/restart my computer and connected the usb cable into laptop, it shows the icon on bottom taskbar (safely remove hardware and when clicked on the usb icon, I see "open Devices & Printers and Eject USB to IDE bridge), but I can't see my drive at all when I click on "my computer"? I can only see it under "right click Computer, Manage, Device Manger, Disk Drives," it only says; "generic USB Disk USB Device". And when I expanded the USB controllers via Device Manager, I can see it under USB Mass Storage Device. Sadly, I can't do much there/here unless Win 7 can see/recognize the drive under "My Computer".<> HD is 40GB IDE Seagate (enclosure is PowerSpec 3.5 IDE to USB 2.0)<> Drive is only storage for data, documents, pictures and softwares/programs, etc.<> Drive is/was not formattedAgain, this drive was never formatted, only for storage purpose (i.e. pictures, documents, data, etc.). I can see it on my old computer when connected internal via IDE cable.
I've had windows 7 64bit installed on my PC and I converted one drive to bitlocker drive, it was working fine
and today after windows went crashing I've freshly installed windows7 64 bit enterprise but I cannot find my bitlocker drive it appears on the disk management as unallocated!
I have a Windows 7 32 Bit mini pc (SPO-Book Turo) It has 4Gigabytes of installed memory but windows will only use 3.The mini pc hasn't got a CD drive.I have put my windows installation files on my second partition of my 1000 gigabyte drive. My BIOS will not identify that the windows set up is on it what so ever.I am trying to install Windows 7 ultimate 64 bit.
I am building a computer fort the first time and I am having trouble getting Windows 7 to recognize my hard drive. My har drive and mother board are as follows: Hard drive-Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive, Mother Board-GIGABYTE GA-870A-UD3 AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard..So when I go to install windows 7 I eventually get to a screen where it ask for an install location, unfortunately it doesn't seem to recognize my hard drive. It gives me an option of installing driver so I went to the gigabyte website and downloaded the drivers that it said I required. I believe there was an AHCI driver and a Raid driver. After I stalled both of these drivers the hard drive still was not detected. One strange thing I noticed was that when I browse for a driver my hard drive is listed as a place I can search. I then proceeded to the Bios to try and match the drivers.The hard drive is detected in the Bio. When the HD is set to IDE my BluRay play is able to read the windows install disc. But windows won't recognize my HD. If I set it to AHCI or Raid I can't seem to get the windows CD to load. Do I need an IDE driver? Out of frustration I tried installing a windows XP to see if it would be able to recognize my hard drive. It seemed to load on the hard drive fine but entered this weird loop where windows would install itself but wouldn't actually load as the operating system. In other words when I try to restart my computer and run the OS off of my hard drive it gave me an error message. Something like (windows OS could not be located) When I went to go install windows 7 again my hard drive still was not detected as a place to intall windows but when I search the hard drive (as if I was searching for a driver) I can see the Windows files that were loaded from when I tried to install XP.
computer will not recognize windows 7 on my usb hard drive when I try to boot from it. I go into bios and select usb hard drive but it goes on with its normal routine. Need to reinstall windows on a computer that I am locked out of.
I'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
My mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.
I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.
I have my WD75 Caviar Black 750G from my old computer it has all my files on it and it will not let me plug it in and look through it probably because the original computer was Win XP. Is there anyway to get the information off of the harddrive?
I have just finished my first build and everything was going fine until I tried to install Windows 7. I got through the first couple menus, then when I get to the part where I have to save the OS in a storage device, it does not detect my hard drive.
Specs:
Gigabyte Intel GA Z77X-U3H Intel core i5 2500k WD Caviar Black 1TB SATA 3 7200 rpm Btw the HDD appears in the Bios.
Attempting to backup my HP laptop to my new Seagate Expansion 3TB plug and play external drive returns the error shown in the screenshot below. After searching Google for a solution it seems the backup utility in Windows 7 is not compatible with high capacity drives over 2.5TB. Am I understanding this correctly? How am I going to backup my laptop onto this drive?I did come across a proposed solution here but apparently this would prevent the drive from working with Windows XP. As I need to move file between the laptop and an XP machine this is not an option for me.There is approximately 126GB of data on the machine and the drive is brand new, formatted to NTFS and otherwise empty.Perhaps I need to use a third party software to backup?
I recently attempted to add a hard drive to my Lenovo W520 laptop using a CD/DVD caddy accessory designed to hold a SATA hard drive.Windows recognized the new device and according to its messages, automatically installed the required device drivers. However, when I go into Windows Explorer, the new drive is nowhere to be found.Now, I know (or at least assume) this new drive probably needs to be formatted, but shouldn't it show up within Windows Explorer even in a pre-formatted state?
my laptop acer aspire doesnt recognize my external hard drive in windows7. I will be great ful to them. it doesn't show any external hard drive but it shows pen drive and mobile usb cable but not external hard disk
