Have To Re-install Network Driver On Every Reboot?

May 2, 2011

I have two NIK's onboard the MB I thought had given out so I installed another in a available PCI slot.They work if I go into Device manager and remove them, then scan for new hardware, the drivers automatically install and it works, but when I reboot they no worky until I do the above step. [CODE]

View 9 Replies


ADVERTISEMENT

Install A Driver For My Network Adapter?

Nov 24, 2012

Okay so I have no clue how to do this. This message pops up every time I try to troubleshoot my internet connection. Windows did not detect a properly installed network adapter. If you have a network adapter, you will need to re-install the driver. This is funny though because my network was working find but there was this issue with my laptop (Windows 7 Home Premium OA 32 bits) and I repaired and now the problem is gone but now I have the problem with my network. What do I do?

View 1 Replies View Related

Install A Driver For My Network Adapter?

Nov 24, 2012

This message pops up every time I try to troubleshoot my internet connection. Windows did not detect a properly installed network adapter. If you have a network adapter, you will need to re-install the driver. This is funny though because my network was working find but there was this issue with my laptop (Windows 7 Home Premium OA 32 bits) and I repaired and now the problem is gone but now I have the problem with my network. What do I do?

View 7 Replies View Related

How To Install Network Adapter Driver ?

Sep 9, 2009

I have a usb network adapter and the driver files are on a flash drive. On XP, I just selected search in this location and selected the driver folder. I cant figure out how to do that in 7. I have the flash drive plugged in and the adapter too but when it searches it can't find the driver folders and i can't find a way to direct it to them.

View 2 Replies View Related

Can't Install Network Adapter Driver

Feb 7, 2012

cant install network adapter driver

View 2 Replies View Related

Install The I5 N 5110 Bluetooth And Network Driver?

Jan 21, 2012

how can i install the i5 n 5110 Bluetooth and network driver

View 1 Replies View Related

How To Install Network Usb Modem And Its Driver In Windows 7

May 9, 2012

i am getting a dialup message when connecting a usb modem to my laptop inorder for it to be able to connect to the network.

View 1 Replies View Related

Network Adapter Driver Failing To Install?

Jan 4, 2013

After a clean install on a new ssd I'm trying to get my network adapter to work. I put the driver files from the site onto a USB stick, went to devices> properties and then tried to install the drivers fro a file. Unfortunately, Win7 says there are no drivers found. On my laptop, WinZip keeps failing to extract the drivers from the ZIP. I downloaded it here:EDIT: I also tried downloading the file again in case the first got corrupted, but I get the same error each time.I also tried another driver from a product that looked very similair

View 2 Replies View Related

Install Network Adapter Driver For Laptop?

Feb 18, 2013

i want to install network adapter driver for me laptop to enable me browse freely with our office wireless network. how do i go about it?

View 1 Replies View Related

Unknown Network After Every Reboot?

Feb 6, 2013

My son has a problem on his PC where everytime he starts up his computer or reboots he can't connect to the internet and the little network icon in the corner of the screen has a yellow warning sign. If you disable the network adapter and then re-enable it then the problem goes away.

View 4 Replies View Related

No Internet.Network Access After Reboot?

Mar 5, 2012

I have a laptop with a Intel N6230 wireless card which I'm having a strange issue with. I can be connected fine to my wireless network but if I perform a reboot the laptop 'connects' to the network however has no internet access (nor can I access the router via its ip address).The only way i can get it working again is delete the wireless adapter via the device manager, let windows re discover and install it, and all is fine again - nothing else is required. It continues to work fine until I shut down and reboot where it drops again (sleep modes or hibernation do not cause any problem).

View 4 Replies View Related

Problems With Network Card After Reboot

Jun 3, 2009

every time i'm doing a restart to my computer i see on the network icon next to the clock a yellow triangle that indicate on a problem. when i open it i see "no network..."

in order to fix it i need to DISABLE & ENABLE my network card and after this step the connection is back & i have internet. Someone know why i have this problem & how to fix it for good?

View 9 Replies View Related

After Reboot I Have To Reconnect To My Wireless Network

Aug 7, 2009

Every time I reboot I have to reconnect to my wireless network. Any ideas? No problems after manually reconnected.

View 0 Replies View Related

Network Connectivity But No Internet After Reboot

Nov 25, 2009

I'm running 7 Home Premium 64bit on an HP box we got about a month ago.

Lately, when I restart the system, I can't get any internet connection. I can access shares on my home network, so the nic is working and I'm getting an ip address from my router. If I disable and reenable the nic, the internet connection works again. I've tried disabling firewalls and things like that, but the only thing that fixes it is the disable/enable.

The network "troubleshooter" can't see anything wrong, and everything looks like it's configured properly, and nothing has been changes since the initial setup. It worked fine for a couple weeks and now doesn't.

Anyone seen this before? Hints? The disable/enable isn't a big deal but I know at some point I won't be home and my wife will have a problem and I'd rather not deal with that!

View 2 Replies View Related

Network Shares Disappear After Router Reboot?

Jul 20, 2011

I have a wired network that has the following connected:1) My Main PC (Quad Core) with all the Shared HDD's (Windows 7 Ultimate 64bit)2) My Wife's PC (HP Touchsmart) Windows 7 Home Premium 32bit3) WD TV LiveHub (Media Player)4) WD TV Live (Media Player)5) My Second PC (Windows 7 Ultimate 64bit)6) My Third PC (Windows 7 Ultimate 64bit)and occasionally my laptop which has Windows 7 Ultimate 64bit and Ubuntu 10Often my ADSL connection drops and I have to restart my router to get it running.Once I do that, and My Main PC is on AND any other PC is on too, the network shares disappear. If I go to "Network" on any PC only the Media Servers are shown and if I go to the Media Players, no shares are shown.If I turn off all other PC's and THEN restart my main PC all shares appear again.I have been searching the Internet but haven't found anything that worked.

View 7 Replies View Related

Network Places Remembering Old IP Settings After Reboot?

Nov 7, 2011

So, I have a class "A" IP Subnet in my home and a class "C" subnet. one is outside the "corporate" firewall and one is inside. My Laptop wireless always loves to obtain the 10.0.0.1 which is the ISA router/firewall. Obviously there is an IP conflict here because the TMG/ISA server/GATEWAY already has that..

This only happens after a reboot and the IP settings that it "desires" are the following:
IP: 10.0.0.1
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1

It should be....
IP: 10.0.0.101
Subnet Mask: 255.0.0.0
Gateway: 10.0.0.1
DNS: 10.0.0.4 = MY DNS
DNS: 10.0.0.5 = MY DNS

Should I delete the network controller, or do I have to delve into the registry to get this crap sorted out? The Laptop ALWAYS connects to the N router but has a problem assigning the IP where it will just assign a bad IP or "first ip" in the sequence. There are times that I need to get beyond the firewall, and I need to assign it a class "c" but I don't understand why this should be having a bearing upon future connections. I have repeatedly reset the "arp" and DNS; to no avail.

I have typed this command at my last chance:
"netsh int ip reset c:
esetlog.txt"

View 2 Replies View Related

Won't Connect To Wireless Network After Reboot Or Wake Up

Aug 3, 2012

Windows tells me that I am connected to the network but I do not get internet access after turning the pc on, waking it from sleep or restart. However, if I disconnect from the network and reconnect I have internet access immediately.

View 2 Replies View Related

Map Network Drive Fails To Retain Password After Reboot

Dec 21, 2009

I have Win 7 ver 6.1 (build 7600) on Desktop and I have a Linux server. I don't use a password to logon to windows.

I successfully mapped Linux drives using my Linux user (which happens to be the same as the windows user) but on Linux I have a password. All the mappings were OK (4 directories) asking me on each one username + password + ticking the box called "retain credentials".

All went OK until I rebooted, then a message pop-up that "could not reconnect all network drives"...appeared: => the old stupid message from win XP.

Ok I opened My computer and surprise: My user and my password from the sharing pop-up window were gone! I've inserted them again and all went OK.

I thought they solved the old windows XP problem which clears the user + password from the Network drive mapping IF you do not have the SAME password as the mapped drives.

What can I do to retain that User+Password combination for good in Win 7 Mapping?

View 0 Replies View Related

Gpu Doesn't Show In Device Manager; Network Card Driver Install Fail

Aug 7, 2012

my brother's hdd in his laptop was going bad, it kept failing to boot. so i replaced it with another one. when i turned the laptop back on it started installing all the drivers for his hardware (windows was already installed on the 2nd hdd) and prompted me to reboot. after i did windows failed to start several times. i re-installed windows from scratch, and now his graphics card isn't showing up in device manager and windows cant find a driver for the network or ethernet card.

his specs:
gateway
windows 7 professional x64
ati mobility radeon hd 4250
broadcom bcm943225hm (network card)
amd phenom II x4 n9790
4gb ddr3

View 1 Replies View Related

Cannot Get Into Install / Reboot Loop

Mar 17, 2012

I built my own custom PC through parts I ordered from newegg last week. Putting the computer together was surprisingly the easy part, while installing a windows OS has been ridiculous. I tried installing windows xp for a few days after running into 0x7b bsod errors, finally getting it to the point it would set up and then would reboot and put the monitor in sleep mode. I tried vista which just immediately gave me the "putting the monitor to sleep" thing right after it said "starting windows." Now i'm trying windows 7 and I once again can't do it. It boots up and does the setting up windows bar, then when it goes to "starting windows" it reboots itself, and does that on repeat. I really hope somebody can help, it's incredibly disheartening to spend $500+ just to have it do anything within its power to not work. I've tried unplugging everything that isn't neccesary, running 1 stick of RAM, I've tried setting it to IDE, RAID, and HCPI. I have tried 2 separate Windows 7 discs. I've reformatted the HD (using xp) multiple times and tried multiple partitions. Windows 7 simply wont even let me get into the installation portion. [code]

View 16 Replies View Related

Windows 7 64bit Crashes After First Reboot Following Install

Jun 23, 2010

I built a machine using the following components:

Gigabyte GV-N98TSL-1GB Fanless 9800GT 1GB GDDR3 PCI-E
Gigabyte GA-770TA-UD3 (rev 1.0)
Processor: AMD K2 2800MHz
Corsair: 2 x 2GB 1066MHz DDR3
HDD: Seagate 2 x 2TB ST32000542AS

Memory has been testing using program from [URL].I'm trying to install Windows 7 64-bit.I built another machine with the same motherboard, processor and RAM which works fine. The differences being between the two machines the Harddisks and Graphics card.On the machine I�m having problems with I have two Seagate ST32000542AS 2TB setup as RAID harddisks and a Gigabyte graphics card.Windows 7 installs but after the first boot from the HDD it displays "Starting Windows" and then resets or displays the blue crash screen. I tried running in safe mode list drivers as it is booting. After disk.sys is loaded the computer freezes.I�ve tried using the latest AMD RAID drivers from the gigabyte website for this motherboard during the installation, but now I�m starting to think this maybe a graphics card driver problem � are there any known issues with the Gigabyte graphics card I�m using and Windows 7?Is there a way of loading the Graphics card driver automatically.

View 9 Replies View Related

Windows 7 Install On Ocz SSD Agility 3 Crashes After 1st Reboot?

Nov 15, 2012

I installed windows 7 on a fresh, quick formatted Ocz Agility 3 hard drive. Everything worked fine until first reboot then during checking of register files it rebooted and got error bootmgr missing.What can be the cause of this?I tried repair with the install disk, and when the repair console searches for windows 7 versions it find two versions one with zero size and the other 110000 something bytes.I tried bootrec/ScanOs, no Os shows up maybe reflecting the zero size version. How can i resolve this issue?

View 3 Replies View Related

Install Upgrade, After Final Reboot, No Boot

Nov 26, 2009

I have vista on my first partition, 7rc on the third (second is vista data).

I had read about how you could upgrade from the release candidate and wanted to try it. Everything seemed to go fine, until the very final reboot. (Windows was upgraded to the new version). I saw my regular boot menu again, but then windows restarted the machine one last time, and when it came back up it just sat there, nothing happened forever. And Vista won't boot anymore either - I do not even get a boot menu. Just a blank screen with a flashing cursor, and nothing happening....

I tried the repair options, but windows can't find any of my system restore points (I did set a number of them!) neither vista nor 7. From a command prompt I did try to run bcdedit and it shows that my original boot menu should still be there, but the system is unable to find it. I am completely stumped. Can someone please indicate what to do to get my system to boot?

View 9 Replies View Related

Windows 7 Install Refuses To Reboot At Expanding Files?

Aug 25, 2011

So I'm trying to install Windows 7 via XP SP2 but every time I try it gets to the expanding files part(27%) and cancels the whole installation saying Windows could not prepare the computer too boot into the next phase. I ran a chkdsk scan on the drive and unplugged all USB devices and some people said that Windows couldn't find the HDD Controllers so I installed my chipset drivers too but still nothing.I can't really format these partitions(especially C: since I need the XP installation on it to install Win 7)What could be cause of this? Can a damaged or missing bootsector(or bootmgr) be to blame?

View 2 Replies View Related

Clean Install Last Reboot Goes Into Black Screen / White Blinking

Dec 7, 2011

So, Im doing a clean windows 7 install. Here are the facts: [code] After the final stage of the setup where you enter PC name, set the password, enter time settings etc, the setup restarts the computer for the 'final' time, final indeed.What happens is that after the Bios / device scan, Windows won't boot and it won't continue past the black screen with the white blinking _ showing in the top left.Could this be because C: has been 'occupied' (or set as master partition) by the 1480GB partition and won't boot from the 105GB partition where Windows was installed?It's so weird because the first two reboots go without problem, no need to F8 and manually select the disk rather than the USB pen or anything.. But on the final reboot, nothing.

View 8 Replies View Related

Windows 7 Home Premium Fail Install On 70% , Reboot And Nightmare

Oct 22, 2012

just build game rig , got genuine Windows 7 home premium , load on ssd-60gb all ok then, installation stops-loops at 70% , led from ssd in pernament- something is wrong.Find out that need to disconnect all usb ports,ect. downgrade ram, so done that , now what to reinstall Windows 7 - instalation disk can't see any drive , so BIOS - no ssd? ran install disk again . go to repair, choose cmdr- it is there under x:boot lol never seen that before. Did try to format - disk write protection, diskpart don't see any disk? connect it to other desktop - os Windows 7 will not see ssd? did I broke that drive? it's now 3 day of my crusade

View 3 Replies View Related

Fresh Install Windows 7 Check Disk Kills The Reboot?

Jul 2, 2012

I do a fresh install of Windows 7 and I have purchased a new hard drive as well as tried it on 2 others. After I do the install odd things happen like long pauses when opening windows like control panel, IE and others. The real trouble begins win I reboot the Pc it then runs a check disk and finds and removes errors. Each time it reboots, check disk and loads windows it takes longer and longer until windows will not boot. I've tried loading all the drivers and none of them. I loading Windows 7 via the disk.

View 1 Replies View Related

Linksys Wireless Adapter Driver Gone After Reboot

Dec 12, 2009

I have Windows 7 Pro installed on my PC, which uses a linksys wireless USB adapter for internet. I have the latest driver installed, but what happens is the driver won't be retained in the settings after I reboot it. The only way to keep this from happening is to hibernate the PC. Never had this problem before and it seems very odd to me since I don't see a reason for Windows to delete the driver.

View 4 Replies View Related

USB Printing Support - Driver Not Found After Reboot

Jun 13, 2011

We have a Flatbad Passbook printer (Globalis Pr90 Plus) that we need to use on Windows 7 machine using USB Port. In the manuals it's said that to use this printer on windows we need to setup this as the EPSON LQ driver. We have done that and the printer worked fine. After rebooting the machine, the USB Printing Support shows a yellow exclamation mark and the printer doesn't work; using troubleshoot, windows 7 is correcting the issue (Driver not found) and the printer works fine until the machine is rebooted where the problem re-occurs and same cycle again.

View 3 Replies View Related

Cant Install Word Packages It Crashes / Now On Install It Comes Up With Cant Find Network

Dec 25, 2010

I have changed the ram and that fixed most NOw this one when w7 starts it looses parts like no disc drives no device manager no modem and so its a restart and they return untiull next time then it all stops again.some programs run slow internet pages are real slow changeing.I cant install word packages it crashes and now on install it comes up with cant find network.

View 6 Replies View Related

Display Driver Stopped Working - Will Not Reboot / Restart Loop

Jan 15, 2013

Graphics card: ATI Radeon HD4870 x2
Running on windows 7 x64 ultimate

I was browsing away and my whole pc froze, with a strange little box around my cursor, although the sound was still working, I force shut down it and restarted and little message popped up saying the display driver has stopped working, I tried multiple things to solve this, to no avail, eventually it kept happening and it got so bad the computer would not start, i tried all of the "F" keys on startup and none worked, eventually i took it to a shop who wiped everything clean and it worked again.

Around 2 months down the line low and behold the same problem happened again, I found a solution and installed a program called driver robot, I used it and installed many outdated drivers, this seemed to fix the problem. For about 6 months, now it has happened again, my computer has now shut down and goes into a constant restart loop, as it is doing this the screens that show up are littered with dots and lines of many colours, I just need workaround on this, preferably without loosing all of my files.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved