Hi guys a couple of months ago I tried Windows 7 but I had to change back to vista due to a Asus P5K inbuilt network card problem, for some bizarre reason it would restart my computer randomly when using anything heavy on bandwidth.
Does anyone know whether or not this has been solved?
I recently build a Frankenstein desktop, or at least that's what I'm calling. I started out replacing the motherboard in a HP Pavillion p6130y desktop.
After some research I found that the stock motherboard as pretty outdated so I decided to go aftermarket. I wanted to replace as little as possible but now the only original parts are the dvd drive and network card. The network card has to screws on the back to attach an antenna and is a PCI1x card.
Current Problem: I now have a problem where after installing the card and Windows 7 Professional , I can see the list of available wireless networks including my own.
But, I cannot connect to any of them even though my own network has full signal strength.
I have the above card, and i cant get 5.1 sound through S/PDIF. I have the lateset drivers(its beta though) and my speakers are the Logitech Z-5500. When i was using XP all was working perfect, but now i am getting 2.1 sound through S/PDIF and no sound through the single connection.
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
I just built a new computer with a Gigabyte Z68A-D3H-B3 motherboard but ir wont recognize my Asus GTX560 Video Card.I have checked all the bios settings and have installed all the drivers.
Not sure if this is at the right place, but! I need to get network driver for my Asus P5K motherboard.
My OS is Win 7 ultimate 32 bit, but I can't find compatible drivers, I guess I'm a noob so please help anyone.
I would love if someone could leave a dircet link for the driver that I will be needing so I don't screw anything up.
Also in the device manager I only see wireless and wifi something, I hope that means I need drivers to fix my problem or do I maybe need to install something else?
This is the first computer I have attempted to build and I haven't really ran into any problems, until I tried to open up my internet. I derped and realized I needed to install a driver for it. I was just wondering...for a Asus M5A97, what kind of network driver do I need to install?
I have been having some trouble with Windows 7 and an ASUS A8V-Deluxe motherboard (K8T800). Windows 7 will not recognize that a network cable has been plugged in, even though the network cable and switch port tests ok on another PC. I've also tried a number of network cables CAT5e/CAT6.
Previous OS was Windows XP and everything worked fine.
System specs: Asus A8V-Deluxe (939) Athlon 3500 2GB DDR400 NVidia 6600GT 256MB 250GB IDE Hard drive LG DVD-RW (IDE)
Background: Started with a BIOS reset and a clean install and format of the hard drive every time
1. Installed Win7 x64 - Network Cable Unplugged 2. Installed Win7 x86 - Network Cable Unplugged 3. Installed Win7 x64 & added a known-to-be-working Intel Pro 100S NIC - Network Cable Unplugged on both NIC's 4. Installed Win7 x64 & added a known-to-be-working Intel Pro 100S NIC - Network Cable Unplugged on both NIC's 5. Disabled Onboard NIC and re-installed Win7 x64 - Network Cable Unplugged (Pro 100S) 6. Disabled Onboard NIC and re-installed Win7 x86 - Network Cable Unplugged (Pro 100S)
So it would appear that something else is causing the Network Cable Uplugged issue, it looks like something within Windows 7, rather than a physical problem with the NIC.
I have tried disabling IPv6, but that makes no difference.
I have tried a couple of BIOS versions, maybe if anyone out there has had any success with this MB and Windows 7 they could recommend a BIOS version?
I've been having this problem ever since Windows Vista 64bit, a problem I've been trying to find a solution to for the last 3 weeks. It's REALLY frustrating to realize that the problem was the network card. I was using a RT2561 branded as a Sabrent wireless card. This card would work fine in normal use, downloading, but when it came to uploading or anything JAVA, it would crash and hardlock the computer. So I thought it might be the OS, then I installed Windows 7 and I still have this problem, even after switching hdds/memory. The problem lies within the network card because once it's removed, theres no crashing.
So I want to ask, what wireless network cards do you guys use that work with Windows 7 64bit. I know there are a few RT61 chipsets out there (Linksys WMP54G) but the RT61 doesn't work well with my machine as it has more than 4GB of memory (article: Ralink RT61 or (RT256x/RT266x) causes freezing Windows 7 x64)
Sad but funny, I went to the store to buy a bunch of network cards to try, and low and behold, most of them use the RT61 chipset . Unfortunately, my location doesn't permit any wired connection. What network cards have you guys found compatible? Do you have 4GB Ram+?
Card is a 3com pci card - 3Com EtherLink 10/100 PCI NIC (3C905-TX).
Now, I have just decided to go 64bit, and all is installed driver wise aside from this card.
So, I have just downloaded a 3c90x1.exe package, (the site I have it from suggests it is 64bit compatible), but when I try to run the exe i get an error suggesting that it is not compatible with the version I am running.
Can anyone offer any suggestions on this please. or a location for a verified working 64bit driver?
I have recently installed windows 7 (64) and wanted to put more RAM in. I started off with 2Gb and added 1 Gb of ram to make 3Gb (No problems Here). I then added another 2Gb of ram bringing it up to 5 Gb (Now the fun begins!)
Windows 7 runs fine and I can play games with the 5Gb...but... I can't seen to get on the internet! It comes up saying unidentified network! I take out the 2Gb and everything is ok again and i can get back online and everything.
I was told to make sure all my drivers are updated which I did and they are all up to date.
we just installed window 7 and it's not comaptible with DWL-G510 pci network card(Dlink) it needs a driver upgrade and can.t find one , anyone can help what to do?
When I start the computer, everything goes fine until the OS starts loading network connection. I get the "device plug in sound" and then everything freezes completely. I have to wait about ten seconds and after "device unplugged sound" the computer works, but only for five second or even less. This continues for about 10-20 minutes every time I boot up the computer.
The problem does NOT occur if I plug of the lan cable. That is not the solution though because the problem continues immediately after I connect the lan cable back. I have tried system restore, installed different network drivers but with no luck. What could be the problem, maybe it is some hardware problem?
My brother has a laptop - wireless network card just stopped . I am going to:
1. Uninstall network card and reboot to see if the system picks it back up. 2. Update the drivers. 3. Check for Malware.
If they don't work then I'll do a restore point.If all the above doesn't work what would you suggest before getting a new network card - presuming it can be replaced and not an on board type ?? System recovery ?
every time i'm doing a restart to my computer i see on the network icon next to the clock a yellow triangle that indicate on a problem. when i open it i see "no network..."
in order to fix it i need to DISABLE & ENABLE my network card and after this step the connection is back & i have internet. Someone know why i have this problem & how to fix it for good?
Each time i load up my computer everything is running nice and smoothly when i start to open up alot of things that uses internet (or simply play a game) all of a sudden my network card dies and starts saying "An Ethernet cable is not plugged in" blah blah. Anyways the cable works 100% I've tried about 6 different cables all resulting in the same thing..
I've tried updating the driver that still didn't fix
I've tried uninstalling the network adapter and reinstall didn't fix it
I've disabled Ivp6 thingy still doesn't fix it
I'm connected to a Router/homenetwork using a REALTEK PCIe GBE Family Controller and computer specs are in my profile.
Each time I put the PC on, I can't use Internet before I deactive then reactive the network card. When it's run fine, I have a domestic network but when I start the Pc I have two networks, the domestic one and a new public one.
As soon as I desactive - reactive the network card, the public network desappear and all is ok as long as the PC stay on..
I'm a brand new user of Seven so perhaps it's just a simple tune I didn't do..
I'm having problems with my wireless networkcard. Sometimes i can connect to the Internet with it but at other times, I am simply unable to connect. Windows detects that there is a problem between my computer, the router, and the Internet. There are five other devices in my house that are able to connect flawlessly. I am currently only able to connect using a wi-fi adapter but this soultuion is awkward as i have only two available USB ports.
i just built a brand new pc, and installed the D-Link DWA-510 network card.
I put in the D-Links DVD and click install drivers. It then comes up with an error saying i ineed to install the network card when it is installed just fine!
I am running Windows 7 64-bit and think the problem may be itisn't windows compatable.
The computer device manager shows that with the wireless network card is okay, and drivers and everything ok, but the network settings show that the wireless network card is disabled. Network card can not be enabled. I tried with several wireless network cards, nothing changes. The problem arose after the computer's motherboard replacement. Everything is working as before, except for a wireless network card.Where would be a problem in Windows
Win7 as a host for VPC - Network card not recognized. I've just installed VPC over Windows 7 7077 but on the network settings I cant choose my LAN connection, I only have the option of Shared NAT?
Is there any problem reported regarding this subject?