I am working in an office that uses dual screens to view stocks and things. When the users hit PrtSc, the system prints BOTH screens. I thought there was a hotkey that allows printing of the "active" screen only. The users are not in a position to paste things to the clipboard or snip. They just need a quick print of their ACTIVE screen.
View 4 Repliesin vista if I used my media keyboard to open a program it would open but now, whilst browsing with firefox and im listening to media monkey and its on the taskbar in vista I could press the media player button on my keyboard and it would bring media monkey to the front, same if i press calc button now all they do is flash on the taskbar till I hover and click them
can I bring this back somehow is this meant to be happening?
I could hold down the Fn key, a large black bar with symbols in it would drop down from the top edge of the screen, I never paid much attention to what was in that, but then I would hit the Prtsc button. Then when I pasted it into Paint, it was ONLY the active window.Now when I hit the Fn key, the black bar does not drop down and when I hit the Prtsc button the entire screen is copied, not just the active window. I really want this ability back. Any ideas on how to get it to function againmorlaine morlaine has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 15 Replies View RelatedFor the past six months or so I've had the problem of having my active window deselect itself many time during a session...as often as every ten seconds or so. I have Windows 7 Ultimate 64 bit installed on a Dell Xps 15z-i7.I have read most of the windows forum suggestions on this topic, and none have work for more than a week or two. I have run ARO software checks and Advanced System Care 6 Pro.
View 7 Replies View RelatedIf I have 2 or more windows open (Windows Explorer or any other application), the most active window always seems to switch to the right on the task bar in the grouping order, is there any way to stop this? I keep having to relaunch to keeping the keep the applications in the order I want on the task bar. Quit assuming I want the most active window on the right Windows! I Don't!
View 3 Replies View RelatedI seem to have a problem with my computer deselecting my active window and normally i wouldn't care but it happens like every minute or so. i can't even type this without interruption. i've looked at my processes in task manager, and the only difference i see is that it will have svchost and windows error reporting activate for a few seconds before going away again. this leads me to believe i have a problem except it doesn't tell me what said problem is. i have looked at similar threads, but i haven't found a solution that worked. the only action that i've tried is turning off the error reporting except that just replaces the deactivating window with a constant notification that host process has stopped working and i need to close the program.
View 9 Replies View RelatedI'm trying to find a way to stop dialogue boxes from automatically becoming the active windows when they pop. I am frequently running multiple tasks at once, and having a dialogue box pop up and move the focus of my cursor while typing a sql script or email is extremely aggravating. I've accidentally typed passwords into dialogue boxes numerous times, if one pops up while I'm trying to remote onto another machine.
View 2 Replies View RelatedWhen in either Outlook or a browser window, and inputting information into a field, the active window disappears momentarily exposing the desktop to view. It still takes all keystrokes in the background, the subject window is still active because any keyboarding is reflected when the window reappears a few seconds (5-10) later. It seems to take down all open windows.
Running Windows 7 Pro 32, on a Lenovo T400 laptop - Core 2 Duo P8800, 3GB PC3-8500, 160GB-7200rpm, ATI Mobility Radeon 3470 with 256MB connected to a ThinkPad Essentail Port Replicator. Resolution - dropped to 1024x768
what i could not find, though, was information on how to focus on windows by simply hovering over them with the mouse.
Back in XP, you could enable this with Tweak UI, which called it X-mouse.
It was great, i didn't have to click on a window to work in it.
but how to enable this in 7?
OPTION #1
As this article points out, you can switch windows by hovering if you enable it through:
Control Panel> Ease of Access> Change How Your Mouse Works
scroll down, check box "Activate a window by hovering over it with the mouse"
this method raises windows to the front when you hover over them.
OPTION #2
For a true X-mouse experience, you could use this third party software TXMouse:
True X-Mouse Gizmo for Windows
if you are familiar with Linux x-mouse behaviour, you might appreciate its other functions.
OPTION #3
If you don't need those extra functions, you can make a couple swift changes in the registry and achieve the same effect:
Step #1:
Open regedit, go to HKEY_CURRENT_USERControl PanelDesktop
Edit UserPreferenceMask value to be 9F 3E 07 80 12 00 00 00
[You should only have to modify the first pair]
Step #2:
Also in HKEY_CURRENT_USERControl PanelDesktop
Edit ActiveWndTrkTimeout, change 'Base' to Decimal and put in 150 as the 'Value Data'
[this value is time in milliseconds that it takes for the focus to change.
to avoid some issues with the taskbar I recommended using a value like 150 or so,
but if you'd like to have a different delay before the window loses focus, set it to whatever you like.]
Step #3:
Log off and log back in
Information (Added by John Galt)
Here is the registry key to do that if you don't want to edit the registry yourself. Hover window select.reg
Here is the registry key to restore the default values. Default Windows hover.reg
this results in windows being active (but not being raised) when you hover over them.
sometimes while in an active program or internet window the window will disappear suddenly and my desktop will appear. When this happens a slight movement of my mouse will return the window I was in.
View 9 Replies View RelatedHow to Activate a Window by Hovering Over it with the Mouse Pointer ?
View 0 Replies View RelatedOn my primary monitor I've run a 360 and my Windows 7 p.c into it. I've set up a shortcut hotkey so that I can disable the primary to swap to the 360 when needs be. However I'd like to be able to access the web whilst using my 360 without having to cycle through the monitor menu to swap back. So I got my old monitor on my desk, however I can't think what to do with it. It's got a lower resolution than my primary so simply making it the secondary whenever I want to use the 360 isn't viable (it messes up the icons).
I can't think of any work around, using ultramon and shrinking the main image isn't very good either due to it having both delay and a lower framerate even at the the highest systme usage settings. Can you guys think of any work arounds? I've tried saving the icon positions but then firefox still opens in the main monitor. I really would like to swap monitors on the fly with a hotkey and restore icons later.
I recently installed two 1920x1080 monitors onto my Win 7 RC 7100. I have them running through DVI out of my 1g NVidia 9800GT. Everything looks and works great, until i try to run MC on one monitor while i play around on the other.
First MC doesnt like 2 monitors so i have to use the windows key to make it lose focus if its in full screen. Even if i use windowed mode eventually it will eventually lock up must be restarted.
Has anyone else worked with MC on a dual screen setup?
i have 2 23 inch acer screen. one hdmi and one vga..i have the "turn off display" set for 15 mins but it seems the hdmi (which is the main display) only turns off as the second screen stays on.i know i can just turn off the second display with WinKey and P but sometimes i have to rush out and have work up on both screens
View 9 Replies View RelatedI am running a Ati Mobility radeon Hd 4530
I can't get the text to be the same size on both monitors. I use to be able to with vista ( they just where)
I am using a java based application with alot of text (only allowed on set of the text) The size difference is like this ---- on monitor this size ---- the other this size.
I have tried mucking around with the resolution it makes the situation worse.
I've just installed windows 7 and I'm expiriencing the following problem. I'm using a dual monitor setup with a philips 170B running at 1280x1024 and a LG W2253 wide running at 1920x1080. The problem is whatever I try to do, the screens wont be placed in a straight line, fitting exactly on the same size. Some small portion of the LG will be outsite of the other screens limits, making windows uneven, etc. Back in Windows xp I never had this problem. Is there anything I can do to fix this?
View 5 Replies View RelatedI have several HDD and one SSD. The SSD was my boot "C" drive and single win 7 OS. The SSD failed so I installed Win 7 on one of the back-up HDD. The install made that drive "C". I replaced the SSD and installed WIn 7 as a second OS on the SSD and it became drive "B". I can boot to either OS install on start-up but regardless of which install I boot with, drive "C" becomes the active system drive, even though the desktops are different (as they shoujld be for the two OS installs). SO, even if I boot from the SSD "B" drive, in windows disk manamgent it indicates that "C" is the "system" and "active" drive while it will indicate that "B" is the "boot" drive.
I want to format drive C so I can change its drive letter and reinstall Win 7 as a single OS to the SSD and make it drive "C", but windows will not let me change drive letters or format the current HDD labeled as "C" - obviously because it considers it the active sytem drive even when I've booted from the "B" SSD.
my computer keeps crashing cause of win32k.sys
Computer Specs:
Gigabyte GA-P55A-UD3
I5 760 2.8ghz quad core
.Zalman 9900aled CPU cooler
G. Skill ribjaws DDR3 1333mhz 8gb ram
Evga gtx 470 1280mb video card
1tb WD black caviar 6gb/s 7200rpm 64mb cache
Thermaltake 775 modular psu
24x DVD/CD burner
Added a 200mm blue led top exhaust
Windows 7 Ultimate x64 Antivirus: Bitdefender ts malwarebyte
i have done a memtest and it was successful without fail also this is the 3rd time I have done a clean install before was cause of ntoskrnl.exe so did a clean install now its cause of win32k.sys?
printer hang while printing and text printing
View 2 Replies View RelatedIs there any way to make a hotkey for switching between the languages in Windows 7 language bar (to use ONLY Ctrl instead Alt+Shift or whatever)
View 6 Replies View RelatedI want to make some "show desktop shortcut" on the taskbar, and when I click on it, it must to react same as when I press Win+M hotkey.
[Shell]
Command=2
IconFile=explorer.exe,3
[Taskbar]
Command=ToggleDesktop
When I save this as show.scf it is react just like Win+D hotkey. But I want to create win+M hotkey's shortcut. If it possible to make this shortcut, when you click on it it must Minimize all windows by effect. And I want to sort folders by myself, for example: I have folder A, B, C, D and I want to sort them not by alphabet or by size.. I should able to put folder D after A, I cant drag them.
It it possible to disable Win+X hotkey � without disabling the Mobility Center itself? Or, better yet, use some other hotkey for mobility center (which, though, is probably simple) and bind some other hotkey to Win+X?
I have HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorerNoWinKeys set to 0x01 already.
Additionally, I want to bind (shift+)alt+tab actions to Win+Z / Win+X � is that possible?Additionally (in case this won't require a separate tread), I can't bind Win+` (at least in Launchy) � is there something special about this combination?
I've been browsing the web to find an answer for my question, but with no luck.
I use Windows 7 on a PC which is setup to be both an office and an entertainment computer. Therefore it's connected to two seperate screens with one graphic card. The screens are one 19" desktop screen (1280x1024) and one 40" Samsung LCD TV (1920x1080). When I'm browsing the web, working with documents etc. I use the desktop screen and when I watch movies, pictures etc. I use the TV.
Now I'm trying to switch between them in an easy way. I've tried several third party applications but eventually found that the best way to switch between these in fact is to use Windows 7 built-in software. I've setup Windows to recognize the two seperate screens and I switch between them by using the "Multiple Displays" option in the settings. I then switch by using "show desktop only on 1/2".
Do anyone know if this switch can be done by using a hotkey combination through Windows or through some other software? It's not the end of the world right clicking the desktop and doing it, but it'd be nice to save a few clicks every time.
Just found out something really cool and useful. It's like 3D flip but better, as all the active windows become smaller but are facing forward, which makes it easier to choose the needed one. When you point them with your mouse, it shows the software/folder name.I know the alt + tab and win + tab combos, but there has to be some for this one too I guess. Haven't found it even though I tried searching the Interner for hotkey guides.The way I found this option was when I was using my Logitech mouse on my laptop, and started customizing the mouse buttons... I found a button command "switch between software", chose it, and found this option out. How can I do the same thing without my mouse, just using some keyboard combo?Here's a pic of how it looks. Originally Microsoft Word was on top, after pressing the button all the windows were resized and placed next to each other.
View 8 Replies View RelatedI have another program with this hot key - and it is not working properly.
View 1 Replies View RelatedI've referred to Shut Down Windows ShortcutFirst time I did a hotkey, somehow it worked, BUT it asked me "What do you want the computer to do?"I wouldn't like it sitting on my desktop either. & now the hotkey is not working whatsoever. I'd like to just press the keys anytime anywhere so my PC will shut right down
View 9 Replies View Relatedcan not remove hotkey from tool bar
View 1 Replies View RelatedWhenever I search in Windows 7, I want to have the ability to open found folders in a new window. If I r-click, that option is not there. Is there a way to add this to Windows 7?
Also: When I go to 'open file location', the file's folder opens in the same window - highly annoying. In Vista, it opens in a new window. Anyway to change this behvior in Windows 7 to act like Vista, so the file opens in a new window?
If I have a folder that usually takes a bit of navigation to get to (don't want any shortcuts on my desktop either as I don't have any shortcuts or icons on my desktop) is it possible to assign some sort of key to instantly open it? Such as holding down CTRL+ALT+184 on the num pad and it will open up that folder. Can it be done?
View 4 Replies View RelatedI was just wondering if there is a hotkey to either focus on/make active what the mouse is over or just to left click. this would be useful for me sometimes and i'm sure it is possible. I haven't seen this on any hotkey lists around though.
View 4 Replies View RelatedI'm a gamer and I want to have 2 desktops such as 1 with a character of the game I play for when I'm with friends and 1 of a lightning storm when I'm out in public. Is there a shortcut such as pressing CRT+S or WIN+S to change desktops so when im in public and I have the wrong desktop I can press the hotkey to change it and change it back when im with friends?
View 3 Replies View Related