Computer Deselects Active Window
Aug 13, 2012
I seem to have a problem with my computer deselecting my active window and normally i wouldn't care but it happens like every minute or so. i can't even type this without interruption. i've looked at my processes in task manager, and the only difference i see is that it will have svchost and windows error reporting activate for a few seconds before going away again. this leads me to believe i have a problem except it doesn't tell me what said problem is. i have looked at similar threads, but i haven't found a solution that worked. the only action that i've tried is turning off the error reporting except that just replaces the deactivating window with a constant notification that host process has stopped working and i need to close the program.
View 9 Replies
ADVERTISEMENT
May 12, 2009
in vista if I used my media keyboard to open a program it would open but now, whilst browsing with firefox and im listening to media monkey and its on the taskbar in vista I could press the media player button on my keyboard and it would bring media monkey to the front, same if i press calc button now all they do is flash on the taskbar till I hover and click them
can I bring this back somehow is this meant to be happening?
View 9 Replies
View Related
Sep 8, 2012
I could hold down the Fn key, a large black bar with symbols in it would drop down from the top edge of the screen, I never paid much attention to what was in that, but then I would hit the Prtsc button. Then when I pasted it into Paint, it was ONLY the active window.Now when I hit the Fn key, the black bar does not drop down and when I hit the Prtsc button the entire screen is copied, not just the active window. I really want this ability back. Any ideas on how to get it to function againmorlaine morlaine has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 15 Replies
View Related
Jan 24, 2013
For the past six months or so I've had the problem of having my active window deselect itself many time during a session...as often as every ten seconds or so. I have Windows 7 Ultimate 64 bit installed on a Dell Xps 15z-i7.I have read most of the windows forum suggestions on this topic, and none have work for more than a week or two. I have run ARO software checks and Advanced System Care 6 Pro.
View 7 Replies
View Related
Apr 5, 2012
If I have 2 or more windows open (Windows Explorer or any other application), the most active window always seems to switch to the right on the task bar in the grouping order, is there any way to stop this? I keep having to relaunch to keeping the keep the applications in the order I want on the task bar. Quit assuming I want the most active window on the right Windows! I Don't!
View 3 Replies
View Related
Jul 29, 2010
I'm trying to find a way to stop dialogue boxes from automatically becoming the active windows when they pop. I am frequently running multiple tasks at once, and having a dialogue box pop up and move the focus of my cursor while typing a sql script or email is extremely aggravating. I've accidentally typed passwords into dialogue boxes numerous times, if one pops up while I'm trying to remote onto another machine.
View 2 Replies
View Related
Dec 11, 2009
When in either Outlook or a browser window, and inputting information into a field, the active window disappears momentarily exposing the desktop to view. It still takes all keystrokes in the background, the subject window is still active because any keyboarding is reflected when the window reappears a few seconds (5-10) later. It seems to take down all open windows.
Running Windows 7 Pro 32, on a Lenovo T400 laptop - Core 2 Duo P8800, 3GB PC3-8500, 160GB-7200rpm, ATI Mobility Radeon 3470 with 256MB connected to a ThinkPad Essentail Port Replicator. Resolution - dropped to 1024x768
View 4 Replies
View Related
May 7, 2009
what i could not find, though, was information on how to focus on windows by simply hovering over them with the mouse.
Back in XP, you could enable this with Tweak UI, which called it X-mouse.
It was great, i didn't have to click on a window to work in it.
but how to enable this in 7?
OPTION #1
As this article points out, you can switch windows by hovering if you enable it through:
Control Panel> Ease of Access> Change How Your Mouse Works
scroll down, check box "Activate a window by hovering over it with the mouse"
this method raises windows to the front when you hover over them.
OPTION #2
For a true X-mouse experience, you could use this third party software TXMouse:
True X-Mouse Gizmo for Windows
if you are familiar with Linux x-mouse behaviour, you might appreciate its other functions.
OPTION #3
If you don't need those extra functions, you can make a couple swift changes in the registry and achieve the same effect:
Step #1:
Open regedit, go to HKEY_CURRENT_USERControl PanelDesktop
Edit UserPreferenceMask value to be 9F 3E 07 80 12 00 00 00
[You should only have to modify the first pair]
Step #2:
Also in HKEY_CURRENT_USERControl PanelDesktop
Edit ActiveWndTrkTimeout, change 'Base' to Decimal and put in 150 as the 'Value Data'
[this value is time in milliseconds that it takes for the focus to change.
to avoid some issues with the taskbar I recommended using a value like 150 or so,
but if you'd like to have a different delay before the window loses focus, set it to whatever you like.]
Step #3:
Log off and log back in
Information (Added by John Galt)
Here is the registry key to do that if you don't want to edit the registry yourself. Hover window select.reg
Here is the registry key to restore the default values. Default Windows hover.reg
this results in windows being active (but not being raised) when you hover over them.
View 9 Replies
View Related
May 9, 2012
I am working in an office that uses dual screens to view stocks and things. When the users hit PrtSc, the system prints BOTH screens. I thought there was a hotkey that allows printing of the "active" screen only. The users are not in a position to paste things to the clipboard or snip. They just need a quick print of their ACTIVE screen.
View 4 Replies
View Related
Jun 26, 2011
sometimes while in an active program or internet window the window will disappear suddenly and my desktop will appear. When this happens a slight movement of my mouse will return the window I was in.
View 9 Replies
View Related
May 7, 2009
How to Activate a Window by Hovering Over it with the Mouse Pointer ?
View 0 Replies
View Related
Apr 3, 2011
just the touchpad. My problem is that sometimes, my cursor will just...jam. Like, stick in some spot on the screen. When it does that, my keyboard will also go dead, and nothing seems to revive it (holding down Ctrl+Alt+Del does nothing; nor does the Esc button). The thing is, though, activity still remains on screen. It's not like that part of it freezes up. For example, I've had it happen to me when I was on Twitter, and yet new tweets came in. And today, when I was filming myself with my webcam, it happened and I was still able to see myself moving in the webcam -- yet I couldn't do anything with the cursor or the keyboard.
View 1 Replies
View Related
Dec 31, 2011
I built my computer years ago and since then have not touched it due to having a macbook for school. I want to upgrade my computer but can't find my Window's 7 cd. If i replace the motherboard, cpu, graphics card, and ram, but keep my old hard drives will my OS still be available? My knowledge about this is slim at the moment until i brush up on everything
View 3 Replies
View Related
Feb 8, 2010
My problem is when I go into computer (my computer) the search in the top right isn't working from within this window! However if I click to go into an individual drive the search will then work from within there on the individual drive. At first it told me the index had been switched off, so I turned it back on even rebuilt the index. & its still the same except it doesn't tell me about the index when I try to search anymore.
It will still search within the individual drives but not from within the computer window. Apart from this the installation works fine. I even run a scan with Kaspersky & Spybot S&D to make sure of any nasties causing it. & run a CHkdisk this morning. I would rather not have to perform a system restore or new installation. It took me ages to install all my apps & don't fancy doing it again.
View 7 Replies
View Related
Sep 13, 2011
just bought a new computer for my business, it is windows 7. I have a lot of customer information and a program on my old computer that is a windows xp home edition. Can I slave the old one so I can run both and not have to transfer over any files?
View 4 Replies
View Related
Jun 17, 2012
My computer hangs every time I choose a new window. Can take upto a minute or two before it shows. No errors or blue screen. This happens in internet explorer and mozilla firefoz. Dell inspiron window 7 home, 64 bit.
View 1 Replies
View Related
Jan 11, 2012
How to send thread on other computer online window
View 1 Replies
View Related
Mar 12, 2012
i need Bluetooth driver for window xp hp 620 laptop computer
View 1 Replies
View Related
Feb 3, 2013
i was facing problem while shutting down my PC, since few days. it always shows the window of force log off. simultaneously i found in between my work system get hang and the task manager also become irresponsible.
View 1 Replies
View Related
Feb 18, 2013
every time i turn on my laptop, a startup repair window pops up and then when it's done solving the problems it shuts down. when i try opening it again the startup window appears.
View 1 Replies
View Related
Aug 18, 2009
I didn't really know how to google for this (although I did), so I didn't find anything proper and like to ask you: How do I remove the "labels" from drive types in "Computer" window? What I mean:
These labels above the different drives are really annoying, as I'm accustomed at one item after another and somehow one could change it to that view in every OS every since (XP, Vista), but now it doesn't seem to work? (I tried all the context menu items )
Any ideas?
View 7 Replies
View Related
Aug 14, 2012
When I switch on the computer, on the monitor, I just see the start window and green dots running, then the monitor screen went black and say 'no signal', I can't even switch off the computer unless holding the switch button for a while.
View 2 Replies
View Related
Feb 16, 2012
Whenever I search in Windows 7, I want to have the ability to open found folders in a new window. If I r-click, that option is not there. Is there a way to add this to Windows 7?
Also: When I go to 'open file location', the file's folder opens in the same window - highly annoying. In Vista, it opens in a new window. Anyway to change this behvior in Windows 7 to act like Vista, so the file opens in a new window?
View 6 Replies
View Related
Aug 22, 2012
I am running into an issue where I can open a window/program with my mouse however once the window is open I cannot click inside of it. The window becomes inactive. I also have noticed I cannot right click on my desktop to bring up the properties. I can right click on the window in the task bar to close it but not in the window. Since this is happening I am limited to command prompt. I ran sfc /scannow with no errors. I tried with 3 different mice. I booted the computer into safe mode with command prompt and brought up the device manager to show devices not in use, and when the device manager window opened I could click inside it! since I could use the window I uninstalled all mouse drivers, and reinstalled my microsoft wireless usb mouse driver.. while in this safe mode I changed my mouse properties to system default as I read somewhere that can reset things. Next I booted the computer in safe mode (without command prompt) and still the same thing. I was trying to do a restore point as well however my Kaspersky antivirus 2012 is preventing that as i cannot find a way to kill the program through command prompt.
View 5 Replies
View Related
Jan 26, 2011
I'm Running Windows 7(64bit)Each time I boot into Windows 7 Prem (64) a open window apears requesting my username at the top of the open window to specify a a program to open it?I've clicked on note pad and I get the following information that apears, each time though it requests, or looks for a program to use to open.
===========================================================================
Interface List
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter
16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
[code]....
View 1 Replies
View Related
Aug 29, 2012
I installed something ( I don't remember anymore) and blue screen appeal:"A problem has been detected and window has been shutown to prevent damage to computer IRQL_NOT_LESS_OR_EQUAL If this is 1st time you have seen this, just restart. if this appeal again:
Check to make sure any new hard/software installed
Disable BIOS memory such as chaing/ shadowing
...
F8-. advanced starting option-> safe mode
[code]....
I uninstalled manything that I think they are potentially damage and used avg tuneup 2012 to fix.
View 3 Replies
View Related
May 26, 2010
My laptop was working fine until I rebooted. After I rebooted, Aero thems is gone. I cannot save any of the settings. Audio is not working. Networking is not working!! I cannot use anything in the control panel. I came to realize that RPC is not available but when i typed services.msc in run, rpc is running well..Tried finding solution everywhere in web , but could not find.System restore is not working either. I tried repair install, but the error pops up after I click the INSTALL now button from the Bootable Win 7 dvd as " Window could not retrieve information about the disk on this computer".On top of that, I had encrypted my encrypted partition with the bitlocker. Now If I happen to format Windows 7, would I be able to access that partition?? I got very important documents in that partition.
View 4 Replies
View Related
Nov 4, 2012
Camera window does not detect camera.
View 2 Replies
View Related
Oct 30, 2009
I am running Windows 7 Ultimate 32bit .I have ticked in Folder Options to open windows in same window but it won't work,the windows are opening in new window!
View 5 Replies
View Related
Aug 26, 2010
new machine (Home Premium x64). It seems to go to sleep based entirely on how long it's been since I touched the mouse or keyboard. If there's a program running, like a virus scan or a download in progress, it goes to sleep right in the middle of it. That's incredibly stupid! How do I make it stay awake when it's in the middle of doing something, even if it's not receiving input from me?
View 8 Replies
View Related
Dec 23, 2012
Is there any way to disactive FN Key by default? To close some folder I need to press FN + Alt + F4 This is a new Toshiba LapTop. It is not a Windows problem.
View 1 Replies
View Related