in vista if I used my media keyboard to open a program it would open but now, whilst browsing with firefox and im listening to media monkey and its on the taskbar in vista I could press the media player button on my keyboard and it would bring media monkey to the front, same if i press calc button now all they do is flash on the taskbar till I hover and click them
can I bring this back somehow is this meant to be happening?
I could hold down the Fn key, a large black bar with symbols in it would drop down from the top edge of the screen, I never paid much attention to what was in that, but then I would hit the Prtsc button. Then when I pasted it into Paint, it was ONLY the active window.Now when I hit the Fn key, the black bar does not drop down and when I hit the Prtsc button the entire screen is copied, not just the active window. I really want this ability back. Any ideas on how to get it to function againmorlaine morlaine has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 15 Replies View RelatedFor the past six months or so I've had the problem of having my active window deselect itself many time during a session...as often as every ten seconds or so. I have Windows 7 Ultimate 64 bit installed on a Dell Xps 15z-i7.I have read most of the windows forum suggestions on this topic, and none have work for more than a week or two. I have run ARO software checks and Advanced System Care 6 Pro.
View 7 Replies View RelatedIf I have 2 or more windows open (Windows Explorer or any other application), the most active window always seems to switch to the right on the task bar in the grouping order, is there any way to stop this? I keep having to relaunch to keeping the keep the applications in the order I want on the task bar. Quit assuming I want the most active window on the right Windows! I Don't!
View 3 Replies View RelatedI seem to have a problem with my computer deselecting my active window and normally i wouldn't care but it happens like every minute or so. i can't even type this without interruption. i've looked at my processes in task manager, and the only difference i see is that it will have svchost and windows error reporting activate for a few seconds before going away again. this leads me to believe i have a problem except it doesn't tell me what said problem is. i have looked at similar threads, but i haven't found a solution that worked. the only action that i've tried is turning off the error reporting except that just replaces the deactivating window with a constant notification that host process has stopped working and i need to close the program.
View 9 Replies View RelatedI'm trying to find a way to stop dialogue boxes from automatically becoming the active windows when they pop. I am frequently running multiple tasks at once, and having a dialogue box pop up and move the focus of my cursor while typing a sql script or email is extremely aggravating. I've accidentally typed passwords into dialogue boxes numerous times, if one pops up while I'm trying to remote onto another machine.
View 2 Replies View RelatedWhen in either Outlook or a browser window, and inputting information into a field, the active window disappears momentarily exposing the desktop to view. It still takes all keystrokes in the background, the subject window is still active because any keyboarding is reflected when the window reappears a few seconds (5-10) later. It seems to take down all open windows.
Running Windows 7 Pro 32, on a Lenovo T400 laptop - Core 2 Duo P8800, 3GB PC3-8500, 160GB-7200rpm, ATI Mobility Radeon 3470 with 256MB connected to a ThinkPad Essentail Port Replicator. Resolution - dropped to 1024x768
what i could not find, though, was information on how to focus on windows by simply hovering over them with the mouse.
Back in XP, you could enable this with Tweak UI, which called it X-mouse.
It was great, i didn't have to click on a window to work in it.
but how to enable this in 7?
OPTION #1
As this article points out, you can switch windows by hovering if you enable it through:
Control Panel> Ease of Access> Change How Your Mouse Works
scroll down, check box "Activate a window by hovering over it with the mouse"
this method raises windows to the front when you hover over them.
OPTION #2
For a true X-mouse experience, you could use this third party software TXMouse:
True X-Mouse Gizmo for Windows
if you are familiar with Linux x-mouse behaviour, you might appreciate its other functions.
OPTION #3
If you don't need those extra functions, you can make a couple swift changes in the registry and achieve the same effect:
Step #1:
Open regedit, go to HKEY_CURRENT_USERControl PanelDesktop
Edit UserPreferenceMask value to be 9F 3E 07 80 12 00 00 00
[You should only have to modify the first pair]
Step #2:
Also in HKEY_CURRENT_USERControl PanelDesktop
Edit ActiveWndTrkTimeout, change 'Base' to Decimal and put in 150 as the 'Value Data'
[this value is time in milliseconds that it takes for the focus to change.
to avoid some issues with the taskbar I recommended using a value like 150 or so,
but if you'd like to have a different delay before the window loses focus, set it to whatever you like.]
Step #3:
Log off and log back in
Information (Added by John Galt)
Here is the registry key to do that if you don't want to edit the registry yourself. Hover window select.reg
Here is the registry key to restore the default values. Default Windows hover.reg
this results in windows being active (but not being raised) when you hover over them.
I am working in an office that uses dual screens to view stocks and things. When the users hit PrtSc, the system prints BOTH screens. I thought there was a hotkey that allows printing of the "active" screen only. The users are not in a position to paste things to the clipboard or snip. They just need a quick print of their ACTIVE screen.
View 4 Replies View Relatedsometimes while in an active program or internet window the window will disappear suddenly and my desktop will appear. When this happens a slight movement of my mouse will return the window I was in.
View 9 Replies View RelatedHow to Activate a Window by Hovering Over it with the Mouse Pointer ?
View 0 Replies View RelatedWhenever I search in Windows 7, I want to have the ability to open found folders in a new window. If I r-click, that option is not there. Is there a way to add this to Windows 7?
Also: When I go to 'open file location', the file's folder opens in the same window - highly annoying. In Vista, it opens in a new window. Anyway to change this behvior in Windows 7 to act like Vista, so the file opens in a new window?
I am running into an issue where I can open a window/program with my mouse however once the window is open I cannot click inside of it. The window becomes inactive. I also have noticed I cannot right click on my desktop to bring up the properties. I can right click on the window in the task bar to close it but not in the window. Since this is happening I am limited to command prompt. I ran sfc /scannow with no errors. I tried with 3 different mice. I booted the computer into safe mode with command prompt and brought up the device manager to show devices not in use, and when the device manager window opened I could click inside it! since I could use the window I uninstalled all mouse drivers, and reinstalled my microsoft wireless usb mouse driver.. while in this safe mode I changed my mouse properties to system default as I read somewhere that can reset things. Next I booted the computer in safe mode (without command prompt) and still the same thing. I was trying to do a restore point as well however my Kaspersky antivirus 2012 is preventing that as i cannot find a way to kill the program through command prompt.
View 5 Replies View RelatedMy front mic isn't working but audio does. I have a headset and my speakers are working but my mic is not responding
View 1 Replies View RelatedI'm Running Windows 7(64bit)Each time I boot into Windows 7 Prem (64) a open window apears requesting my username at the top of the open window to specify a a program to open it?I've clicked on note pad and I get the following information that apears, each time though it requests, or looks for a program to use to open.
===========================================================================
Interface List
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter
16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
[code]....
My front panel USB are not working (Yesterday i found a solution for my front audio)
View 3 Replies View Relatedlast week bought a new pc.but a problem happened 2 time for this new pc for me is that sometimes when i connect a flash driver into front panel usb 3 suddenly windows crash and freeze.even i can't restart pc after i push restart bottom in case the pc turn off.some one said me never us that front panle usb port. it may crash your mainboard.
View 6 Replies View RelatedI have a Corsair case with an Asus P8Z77 LX motherboard. I have already had Corsair send me a replacement front panel connection for the USB 3.0 ports, and am now stuck at what to do. Basically USB 2.0 connection speeds are abysmal over the front panel USB 3.0 ports. USB 3.0 (Hard disk and flash drive) drop connections promptly. Sometimes things can be copied from them successfully at a reasonable speed. But writing any data to them it always, every time drops out and Windows 7 reports that the device is no longer available.
View 5 Replies View RelatedI run win 7 for a few weeks now and i would edit some of my boot time now i oc my computer.
Is there any tool where you can place all the boot files in front of my hdd?
The microphone jack on the front panel of my computer is having detection problems. I have tried the "disable front panel detection" option and then my mic works perfectly after that. However, whenever I hit the mute switch on my microphone, whatever is playing on my computer gets broadcasted from my mic for everyone to hear even though my microphone is switched off. I've tried this with multiple microphones and the result is the same with each of them. I've been looking around for solutions and haven't found any solution to this articular problem.
View 1 Replies View RelatedI have SB X-Fi Platinum Fatal1ty Champion installed on my computer ( Win 7). I installed and updated all drivers and used it in Game mode first. Everything - sound, rare mic, front headphones , even remote controle worked just perfectly.After that I needed to use the front line-in so I pluged my cable in, changed the mode to Audio Creation and changed the recording device from microphone ( the rare one) to line-in ( front panel). It also worked just fine but since then I can't reverse it back. My rare mic won't work. I reinstalled the drivers, checked my mic - everything is just fine and working(checked on another computer) but the mic won't work. It can't recognize that the mic is plugged in.After long search in the net I found the interesting information that once you anable the front panel the back mic will get disabled automatically. Now I can't get it back to work. So my question is how can I disable the front line-in or panel
View 1 Replies View RelatedFront panels of computer not work.what to do.
View 2 Replies View Relatedtrying to find some key+click combination to bring all windows for a given application to the top of z-order. For example, I have several Putty terminal windows open in the stacked taskbar icon and I want to display all of them, not just the last used. The only work-around I have found so far is to shift+right-click and "minimize all windows" followed by "restore all windows".
View 2 Replies View RelatedI recently got a brand new computer case and today when I inserted external HDD, the computer reseted itself.HDD is working fine in motherboard USB ports, but when I want to connect the HDD device from front panel, the screen suddenly goes back and computer restarts.In device manager there is no problem discovered.It resets even if I touch the USB port with the HDD connector.It can't be short circuit right?
View 9 Replies View RelatedI have four USB ports on the front panel and four on the rear panel of the case. I have two "Enhanced" USB controllers. How can I determine which of the four USB front panel ports are USB 2.0 ??
View 2 Replies View RelatedLast month I built my own computer. I am having a problem with my Front I/O audio jacks.- Headset is Beats by Dr. Dre Solo HD- I have went into BIOS and enabled my Front I/O- My front I/O is properly connected to my Motherboard- My driver is Realtek HD R267 (Newest driver)I have looked up this problem for quite some time but can't find a way to fix it. People have said to go into Realtek Audio HD Manager and click on the folder next to analog and untick disable front detection. I don't have this folder
View 6 Replies View RelatedI have an hp media center PC m7350n and I have upgraded from Windows XP to Windows 7, I also installed a new graphics card AMD Radeon HD 6450. When I was working on Windows XP my front panel audio was working for my headsets and microphone. Since I've upgraded my headsets and microphone don't work anymore. I tried many different things but didn't work. I first checked the connections inside the PC then I upgraded to the last Realtek HD driver, I looked in the bios nothing there to be done, I don't even have an option for front panel. The only option I have is onboard audio- auto/enable and disable which only works on enable. Then I looked in Realtek audio manager and the front panel connectors are greyed out or lighter than all the other connectors. When I plug in my headsets and microphone nothing happens and speakers still work. I checked mark disable back connectors when headsets are plugged in and nothing changes. The only change I have is when I check out mute microphone boost I have a squelching sound in my headsets. All the forums talk about Bios and front panel enabled and alc97 which I do not have as an option.
View 4 Replies View RelatedI am getting "not enough memory" errors that lock up my system when I try to insert graphics on my website using Front Page 2003. I have tried reinstalling it, running the Windows 7 compatibility tool, cleaning my temp folder ..I really need to get this working so I can update my website.
View 6 Replies View Relatedno sound in the front audio panel,i will connected the audio cable f_Audio
View 1 Replies View RelatedI have a new computer Windows 7. I have an 11 yr. old front page designed and edited website. I cannot get front page to work on my new computer but neither can I get Expression Web to work.
View 3 Replies View Relatedmy system does not show front panal .
View 2 Replies View Related
