I have a Corsair case with an Asus P8Z77 LX motherboard. I have already had Corsair send me a replacement front panel connection for the USB 3.0 ports, and am now stuck at what to do. Basically USB 2.0 connection speeds are abysmal over the front panel USB 3.0 ports. USB 3.0 (Hard disk and flash drive) drop connections promptly. Sometimes things can be copied from them successfully at a reasonable speed. But writing any data to them it always, every time drops out and Windows 7 reports that the device is no longer available.
last week bought a new pc.but a problem happened 2 time for this new pc for me is that sometimes when i connect a flash driver into front panel usb 3 suddenly windows crash and freeze.even i can't restart pc after i push restart bottom in case the pc turn off.some one said me never us that front panle usb port. it may crash your mainboard.
I have SB X-Fi Platinum Fatal1ty Champion installed on my computer ( Win 7). I installed and updated all drivers and used it in Game mode first. Everything - sound, rare mic, front headphones , even remote controle worked just perfectly.After that I needed to use the front line-in so I pluged my cable in, changed the mode to Audio Creation and changed the recording device from microphone ( the rare one) to line-in ( front panel). It also worked just fine but since then I can't reverse it back. My rare mic won't work. I reinstalled the drivers, checked my mic - everything is just fine and working(checked on another computer) but the mic won't work. It can't recognize that the mic is plugged in.After long search in the net I found the interesting information that once you anable the front panel the back mic will get disabled automatically. Now I can't get it back to work. So my question is how can I disable the front line-in or panel
I recently got a brand new computer case and today when I inserted external HDD, the computer reseted itself.HDD is working fine in motherboard USB ports, but when I want to connect the HDD device from front panel, the screen suddenly goes back and computer restarts.In device manager there is no problem discovered.It resets even if I touch the USB port with the HDD connector.It can't be short circuit right?
I have four USB ports on the front panel and four on the rear panel of the case. I have two "Enhanced" USB controllers. How can I determine which of the four USB front panel ports are USB 2.0 ??
I have an hp media center PC m7350n and I have upgraded from Windows XP to Windows 7, I also installed a new graphics card AMD Radeon HD 6450. When I was working on Windows XP my front panel audio was working for my headsets and microphone. Since I've upgraded my headsets and microphone don't work anymore. I tried many different things but didn't work. I first checked the connections inside the PC then I upgraded to the last Realtek HD driver, I looked in the bios nothing there to be done, I don't even have an option for front panel. The only option I have is onboard audio- auto/enable and disable which only works on enable. Then I looked in Realtek audio manager and the front panel connectors are greyed out or lighter than all the other connectors. When I plug in my headsets and microphone nothing happens and speakers still work. I checked mark disable back connectors when headsets are plugged in and nothing changes. The only change I have is when I check out mute microphone boost I have a squelching sound in my headsets. All the forums talk about Bios and front panel enabled and alc97 which I do not have as an option.
I have this motherboard. and get no audio when I plug in headphones in the front or back ports. I'm running win 7 so there aren't compatible drivers available on asus site, I tried downloading the vista x64 and installing them in compatibility mode but the device manager shows "High Definition Audio Device" so I think it's still using a generic windows driver.
Also tried these: Realtek
Sound>Playback shows Digital Audio (S/PDIF) and sound bars move while playing a mp3 or movie but still no audio. Usually speakers and headphones show up I though? I don't even see them when I choose show disabled devices. I tested usb headphones and got audio but I really need those 3.5 jacks to work.
The audio on this board is: Realtek ALC662, 6-CH High-Definition Audio CODEC
I've also reset the bios, and the mic shows up and receives data when plugged in but still no sound.
I upgraded from Windows XP to Windows 7 64bit. In XP, I used the front panel headphone jack for hooking up to my TV, or headset. Since I've upgraded, this headphone jack doesn't work. The 'Manage Audio devices' in the control panel shows headphones as not connected in the front jack. The microphone works fine.
I've tried looking for updated drivers - I have the latest. I tried to switch the BIOS settings from HDaudio to AC97 - doesn't work. I tried to install the Soundmax High Definition Audio utility from my motherboard installation disk, but Windows 7 won't let me run the setup (not compatible with the OS).
I just had to move my graphics card to another slot for access to another PCIE slot. And my back audio sound jack stopped working. Ive tried with my monitor speaker and headphones and it does not work. Specs:
windows 7 i7 3930k 32gb of ripjaws Z noctua nh-d14 thermal take level 10 gt x79 sabertooth
My front panel audio does not work either. I got bios set to HD audio and i am using the hd audio plug
My cpu front panel headfone&speaker jack is not working.If iam inserting headset &mic its not detected.if i am connecting it from back then it is working.Is it a hardware problem or software problem.................?I have checked out my cpu internal connections by removing the cabinet .Every thing is connected internally
I have a front audio panel and a CMI 8738-6ch sound card.The front audio does not work and has a wire coming directly from the back of it with this plug on the end of it... There are 4 wires going into this plug.On the sound card I have a 4 pin connector which, by trying with the computer turned off, I know fits this plug. Despite them fitting together, this being the only wire coming from the front audio panel and plug being on the sound card we all know that naivety often makes 2+2 = 5?
Desktop does not respond to mouse actions as previously nor the front panel power switch.I have to disconnect the power cord, reconnect, and press the front panel power button. Then the unit starts up and returns to window without the login window as if it was sleeping.The problem started after my attempts to install a defective external drive enclosure connected with an esata cable. I have since obtained a working external enclosure connected with an esata cable. The present Sleep wakeup malfunction is now present with or without a working external drive.
I have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
I just realized that stereo output is inverted (L&R are swapped) on my Realtek front panel headphones connector and on my M-Audio Firewire card. Output is OK on Realtek rear main/front speakers connector.
My sound card Xonar D1 doesn't work properly and i wrote to ASUS and they told me to connect the "HD audio" or "speaker" cables from the front panel of motherboard to the sound card's front panel. Is that safe to do? weather it will work or not, is it safe to try?
I have to print a few dozen PDFs, each of which have between ten and one hundred pages each. The problem is, none of them actually reference their source, so when my boss reads them next to each other and piles them together, he has no way of knowing which ones came from which PDF. Is there a way I can add a "header" to the top of each page of a printed PDF, much like how when I add page numbers to a print job they go in the "footer"?I'm running Windows 7 and printing a PDF from Firefox. If it allows for more customizable print jobs I can print the PDF from Adobe Reader.
I posted a query in the Crashes and Debugging section, but I want to change the header text, as it seems to be scaring people away. I am able to edit the main text of the thread but not the header itself. Does anybody know how I can do this?
I wish to install a header and footer in Office 2010 (Window 7) on the first page only. It is ipossible for me to follow the instructions in Word 2010 help.
Has someone found a way to make the mail preview pane header smaller as it was in Outlook Express? It occupies so much space that it makes it annoying! If I make it disappear also disappears the possibility to add the sender to recognize it as secure and the link to view images.
why i am getting bluescreen everyday.I tried to reinstall everything on my end also had a new hardware replaced with the same model and still i am getting the bluescreen error.
I've tried all I can think off but have not been able to locate the cause for the contant crashes I'm attaching last 5 minidumps and hope you can guide me.
My PC:
OS: Win 7 - 64bit - Home Premium SP1 Intel QuadCore CPU - Q 6600 8 GB RAM
When I try to sync music from windows media player to my phone, I get an error message on some songs that says File header too large. What I can do to correct this so the songs will play. I download mp3s from napster & my phone is a Blackjack2.
earlier turned on my pc, and it blue screened with the error Bad_Pool_Header. It had been on 4 hours before hand and during the session before it Blue screened I installed no new hardware or software. I ran though the .dmp with OSR online and this is what it said:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.17017.amd64fre.win7_gdr.120503-2030 Machine Name: Kernel base = 0xfffff800`03459000 PsLoadedModuleList = 0xfffff800`03695e70 Debug session time: Fri Sep 14 12:36:07.614 2012 (UTC - 4:00) System Uptime: 0 days 0:02:29.753
So I just got back from a 3 day vacation, and when I came back I rebooted my computer only to come back to the "Start Windows Normally/ launch startup repair" naturally I chose startup repair, it froze. Tried starting normally, took me back to the same page. So I tried booting in safe mode, took me to the BSOD that read Bad_pool_header. So then I tried to putting in my windows 7 installation disc to see if I could do a system recover from there, but as soon as I try boot up with the disc it takes me back to the same BSOD. I feel completely stuck as I've tried everything I can think of.
