I have this motherboard. and get no audio when I plug in headphones in the front or back ports. I'm running win 7 so there aren't compatible drivers available on asus site, I tried downloading the vista x64 and installing them in compatibility mode but the device manager shows "High Definition Audio Device" so I think it's still using a generic windows driver.
Also tried these: Realtek
Sound>Playback shows Digital Audio (S/PDIF) and sound bars move while playing a mp3 or movie but still no audio. Usually speakers and headphones show up I though? I don't even see them when I choose show disabled devices. I tested usb headphones and got audio but I really need those 3.5 jacks to work.
The audio on this board is: Realtek ALC662, 6-CH High-Definition Audio CODEC
I've also reset the bios, and the mic shows up and receives data when plugged in but still no sound.
I just had to move my graphics card to another slot for access to another PCIE slot. And my back audio sound jack stopped working. Ive tried with my monitor speaker and headphones and it does not work. Specs:
windows 7 i7 3930k 32gb of ripjaws Z noctua nh-d14 thermal take level 10 gt x79 sabertooth
My front panel audio does not work either. I got bios set to HD audio and i am using the hd audio plug
For my custom computer I want it to have all of the proper parts in front (power, reset, LEDS, USB, audio), and I found how to do the switched and LEDs, but not usb ports and audio jacks. where do I get these? I can dissect a USB hub and wire it to a header, but a premade solution would be better.also i'd like to install a SD (and maybe MicroSD) card reader without using a drive bay (and ideally using the same header as the usb ports).
I have an hp media center PC m7350n and I have upgraded from Windows XP to Windows 7, I also installed a new graphics card AMD Radeon HD 6450. When I was working on Windows XP my front panel audio was working for my headsets and microphone. Since I've upgraded my headsets and microphone don't work anymore. I tried many different things but didn't work. I first checked the connections inside the PC then I upgraded to the last Realtek HD driver, I looked in the bios nothing there to be done, I don't even have an option for front panel. The only option I have is onboard audio- auto/enable and disable which only works on enable. Then I looked in Realtek audio manager and the front panel connectors are greyed out or lighter than all the other connectors. When I plug in my headsets and microphone nothing happens and speakers still work. I checked mark disable back connectors when headsets are plugged in and nothing changes. The only change I have is when I check out mute microphone boost I have a squelching sound in my headsets. All the forums talk about Bios and front panel enabled and alc97 which I do not have as an option.
I have a front audio panel and a CMI 8738-6ch sound card.The front audio does not work and has a wire coming directly from the back of it with this plug on the end of it... There are 4 wires going into this plug.On the sound card I have a 4 pin connector which, by trying with the computer turned off, I know fits this plug. Despite them fitting together, this being the only wire coming from the front audio panel and plug being on the sound card we all know that naivety often makes 2+2 = 5?
I have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
I just realized that stereo output is inverted (L&R are swapped) on my Realtek front panel headphones connector and on my M-Audio Firewire card. Output is OK on Realtek rear main/front speakers connector.
My sound card Xonar D1 doesn't work properly and i wrote to ASUS and they told me to connect the "HD audio" or "speaker" cables from the front panel of motherboard to the sound card's front panel. Is that safe to do? weather it will work or not, is it safe to try?
I have a pair of speakers that I have tested on other computers and had working on this system until recently it stopped. When I plug the speakers into the back port and turn the volume up max on the speakers itself and the in OS sound options I can faintly hear the audio. I have tried uninstalling and reinstalling the latest drivers. I have even tried reinstalling windows and it still happening. The front headphone jack will do the same with my head phones as well. Since its still happening after a reinstall im guessing its a hardware issue but I dont understand why my front headphone jack would do the same as well. I did recently remove my power supply and then put it back in.
last week bought a new pc.but a problem happened 2 time for this new pc for me is that sometimes when i connect a flash driver into front panel usb 3 suddenly windows crash and freeze.even i can't restart pc after i push restart bottom in case the pc turn off.some one said me never us that front panle usb port. it may crash your mainboard.
I have a Corsair case with an Asus P8Z77 LX motherboard. I have already had Corsair send me a replacement front panel connection for the USB 3.0 ports, and am now stuck at what to do. Basically USB 2.0 connection speeds are abysmal over the front panel USB 3.0 ports. USB 3.0 (Hard disk and flash drive) drop connections promptly. Sometimes things can be copied from them successfully at a reasonable speed. But writing any data to them it always, every time drops out and Windows 7 reports that the device is no longer available.
I have SB X-Fi Platinum Fatal1ty Champion installed on my computer ( Win 7). I installed and updated all drivers and used it in Game mode first. Everything - sound, rare mic, front headphones , even remote controle worked just perfectly.After that I needed to use the front line-in so I pluged my cable in, changed the mode to Audio Creation and changed the recording device from microphone ( the rare one) to line-in ( front panel). It also worked just fine but since then I can't reverse it back. My rare mic won't work. I reinstalled the drivers, checked my mic - everything is just fine and working(checked on another computer) but the mic won't work. It can't recognize that the mic is plugged in.After long search in the net I found the interesting information that once you anable the front panel the back mic will get disabled automatically. Now I can't get it back to work. So my question is how can I disable the front line-in or panel
I recently got a brand new computer case and today when I inserted external HDD, the computer reseted itself.HDD is working fine in motherboard USB ports, but when I want to connect the HDD device from front panel, the screen suddenly goes back and computer restarts.In device manager there is no problem discovered.It resets even if I touch the USB port with the HDD connector.It can't be short circuit right?
I have four USB ports on the front panel and four on the rear panel of the case. I have two "Enhanced" USB controllers. How can I determine which of the four USB front panel ports are USB 2.0 ??
The audio jacks that came with the motherboard don't work. I've tried different speakers, restarted my computer etc. It doesn't appear under playback devices. It doesn't seem to appear under device manager either.
I just picked up a set of gaming headphones that use optical audio for its source, but I also have a set of 5.1 surround speakers. I'd like to be able to just use the headphones when I want to without having to go into sound manager and make the optical plug the default audio source every time I want to use them. Is there a way to enable both audio sources at the same time or do I have to switch them every time?
I upgraded from Windows XP to Windows 7 64bit. In XP, I used the front panel headphone jack for hooking up to my TV, or headset. Since I've upgraded, this headphone jack doesn't work. The 'Manage Audio devices' in the control panel shows headphones as not connected in the front jack. The microphone works fine.
I've tried looking for updated drivers - I have the latest. I tried to switch the BIOS settings from HDaudio to AC97 - doesn't work. I tried to install the Soundmax High Definition Audio utility from my motherboard installation disk, but Windows 7 won't let me run the setup (not compatible with the OS).
My cpu front panel headfone&speaker jack is not working.If iam inserting headset &mic its not detected.if i am connecting it from back then it is working.Is it a hardware problem or software problem.................?I have checked out my cpu internal connections by removing the cabinet .Every thing is connected internally
so i was connected my bass amplifier (from headphone output) to the line in and i recorded the sound with soundbooth. when i played it back it was kind of skipping so i changed the quality to a higher hz and i recorded and it sounded right. when i went to move my amplifier a bit, because cables were all over the place, strange noises started comming out of the speaker. i unplugged the amplifier and restarted the computer and the sound and the realtek icon were gone . so i reinstalled the drivers and the icon was back, but the computer wasnt detecting when i plugged in my speakers or headphones. so i dugg deeper and checked my BIOS and everything was ok. i then went and uninstalled every driver related to sound with device manager and driver sweeper and reinstalled everything in safe mode. i even tried windows recovery and it still didnt work.i'm wondering now do i have to buy a soundcard or is there something else i can try?there aren't any yellow triangles in device manager and the realtek hd audio says that the device is working properly. [code]
Desktop does not respond to mouse actions as previously nor the front panel power switch.I have to disconnect the power cord, reconnect, and press the front panel power button. Then the unit starts up and returns to window without the login window as if it was sleeping.The problem started after my attempts to install a defective external drive enclosure connected with an esata cable. I have since obtained a working external enclosure connected with an esata cable. The present Sleep wakeup malfunction is now present with or without a working external drive.
dell xps gen 4 running windows 7 (32 Bit)after downloading the latest windows updates, front and back USB ports no longer recognize the USB devices that were plugged in before. The usb device drivers no longer automatically load. usb ports recognize unknown device but device does not function (USB wireless Keyboard/ mouse or external hard drive) I deleted last few updates, re-booted computer and still get same result.
Last month I built my own computer. I am having a problem with my Front I/O audio jacks.- Headset is Beats by Dr. Dre Solo HD- I have went into BIOS and enabled my Front I/O- My front I/O is properly connected to my Motherboard- My driver is Realtek HD R267 (Newest driver)I have looked up this problem for quite some time but can't find a way to fix it. People have said to go into Realtek Audio HD Manager and click on the folder next to analog and untick disable front detection. I don't have this folder
I have a new, custom build and cannot get the front audio to work. The two USB ports along side the Mic and Headphone jacks work fine.
System Specs The motherboard is a GA-990XA-UD3. Chipset AMD RD9XO Rev 02. Southbridge AMD SB10/950 R40. Bios Award Software Ver F8 CPU: AMD Phenom II x6 1090T Black Edition Tuban HDT90ZFBGRBOX Memory: Corsair Vengeance 16GB 4 x 4GB CMZ16GX3M4A1600C9 OS: Windows 7 (6.1) Home Premium SP 1 (Build 7601) 64 bit. Direct X 11.0 Don't think it makes a difference but I am running displayport out of the graphics card (Zotac 560 ZT-50701-10M) into the monitor (NEC PA241)
I downloaded updated drivers for the Reatec HD Audio Manager but that made no difference. Audio out from the back panel works fine.
