I recently installed two 1920x1080 monitors onto my Win 7 RC 7100. I have them running through DVI out of my 1g NVidia 9800GT. Everything looks and works great, until i try to run MC on one monitor while i play around on the other.
First MC doesnt like 2 monitors so i have to use the windows key to make it lose focus if its in full screen. Even if i use windowed mode eventually it will eventually lock up must be restarted.
Has anyone else worked with MC on a dual screen setup?
for the last week or so I've been getting consistent BSOD's. I have reinstalled windows, updated all my drivers, even bought a new graphics card, and I am still having problems. I was having problems with memory, although these got sorted out when I tweaked the numbers. The slightly confusing thing is that almost every time I get a BSOD, it's a new error. 64 bit windows 7 home premium - Hardware is less then one year old, except hard drive. - OS installed a few days ago
On my primary monitor I've run a 360 and my Windows 7 p.c into it. I've set up a shortcut hotkey so that I can disable the primary to swap to the 360 when needs be. However I'd like to be able to access the web whilst using my 360 without having to cycle through the monitor menu to swap back. So I got my old monitor on my desk, however I can't think what to do with it. It's got a lower resolution than my primary so simply making it the secondary whenever I want to use the 360 isn't viable (it messes up the icons).
I can't think of any work around, using ultramon and shrinking the main image isn't very good either due to it having both delay and a lower framerate even at the the highest systme usage settings. Can you guys think of any work arounds? I've tried saving the icon positions but then firefox still opens in the main monitor. I really would like to swap monitors on the fly with a hotkey and restore icons later.
i have 2 23 inch acer screen. one hdmi and one vga..i have the "turn off display" set for 15 mins but it seems the hdmi (which is the main display) only turns off as the second screen stays on.i know i can just turn off the second display with WinKey and P but sometimes i have to rush out and have work up on both screens
I can't get the text to be the same size on both monitors. I use to be able to with vista ( they just where)
I am using a java based application with alot of text (only allowed on set of the text) The size difference is like this ---- on monitor this size ---- the other this size.
I have tried mucking around with the resolution it makes the situation worse.
I am working in an office that uses dual screens to view stocks and things. When the users hit PrtSc, the system prints BOTH screens. I thought there was a hotkey that allows printing of the "active" screen only. The users are not in a position to paste things to the clipboard or snip. They just need a quick print of their ACTIVE screen.
I've just installed windows 7 and I'm expiriencing the following problem. I'm using a dual monitor setup with a philips 170B running at 1280x1024 and a LG W2253 wide running at 1920x1080. The problem is whatever I try to do, the screens wont be placed in a straight line, fitting exactly on the same size. Some small portion of the LG will be outsite of the other screens limits, making windows uneven, etc. Back in Windows xp I never had this problem. Is there anything I can do to fix this?
Gigabyte GA-P55A-UD3 I5 760 2.8ghz quad core .Zalman 9900aled CPU cooler G. Skill ribjaws DDR3 1333mhz 8gb ram Evga gtx 470 1280mb video card 1tb WD black caviar 6gb/s 7200rpm 64mb cache Thermaltake 775 modular psu 24x DVD/CD burner Added a 200mm blue led top exhaust Windows 7 Ultimate x64 Antivirus: Bitdefender ts malwarebyte
i have done a memtest and it was successful without fail also this is the 3rd time I have done a clean install before was cause of ntoskrnl.exe so did a clean install now its cause of win32k.sys?
Ever since we've got this desktop we seem to have problems with the screens. It's like it randomly chooses different worlds to reside in. We turn on our computer and then it's just our background picture with no taskbar or programs, but if we just turn the monitor off and then on again it goes back to our regular screen. Then once our screensaver picks up and we decide to get back on, it does it again and so on. Sometimes when we minimize things it disappears off into those other worlds (off to the right side of the computer screen somewhere). Does anyone have any clue as to why this is going on? Is there a way to delete those other "worlds" that my computer visits every so often and that all my stuff likes to travel to?
Everything seems to be ok until I install SP1 . After Restart or a complete shutdown, windows does not bootup. Unless I use the System Repair Disk and Backup Image or Complete Reinstall of WIN 7 So far I've done the online install 8 times. Downloaded to disk and tried twice.After new install, copied to C: and installed from there. Same result: Windows does not reboot after SP1
would like to add a 3rd monitor to my PC, I understand I need a Graphics card that can support 3 monitors, I think this is ports AGP DMI HDMI if the initials are wrong I am sorry, anyhoo I then have 3 ports to plug into, the question is.. Stay with me I have 2 Hanns G 23" monitors and a HP 24", I would like the HP to be the centre one, in which I do most of my work, the other 2 which I hope can be left and right of centre, going with the graphics card at the moment, I have screen (1) and screen (2) it was simple setup, but I have to push my mouse to the right to get into my 2nd screen thats sits on my left, ok I could place this screen on my right, it's not the point, when I get the 3rd screen will I have the flexibility to make the centre screen i.e the one that will hold my icons etc number 1 screen, then in a perfect world push the mouse to the right and I am in the RH screen, or push the mouse to the left (from centre screen) and I am in the LH screen?
i'm trying to add a second monitor so that i can't switch between screens... everything is set up but its just mirroring each other, i've tried detecting the second one but still nothing
I'm trying to install Windows 7 SP1, but about four minutes into the process, I get a blue screen. This has happened every time I've attempted the installation. I also frequently get blue screens whilst working generally. Do you know what the problem is? System info and the report from the latest blue screen are below.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, 64 bit Processor: AMD Athlon(tm) II X4 640 Processor, AMD64 Family 16 Model 5 Stepping 3 Processor Count: 4 RAM: 16382 Mb
When I'm using my computer I tend to get a black screen at random times. So far they usually occur while I'm browsing the web and while I'm playing games while on Skype. This happened before and the problem was that I needed a new DVI cable. After getting it fixed it was working fine until about a week ago where I started getting few crashes. Now I'm getting 1 crash everyday.There are times where I go to start my computer, but after the Windows logo I am left with a black screen. I usually keep restarting my computer until it turns on normally. I don't know why but I have a hunch that it might be PSU, temperature, or compatibility problems.I'm not sure if I've attached everything you need, so do let me know if I'm missing anything.
I've been getting these blue screens that occur while I am away from the computer almost exclusively. It happens occasionally while in use, but if I leave it I can be sure it will have crashed when I return.[code] Read our privacy statement online: Windows 7 Privacy Statement - Microsoft Windows..If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt.
had just been using rockmelt browser(chromium) and the system screens went blank and the monitors reset but the aero was disabled so i re enabled aero and that's when it blue screened some kernel fault it said ,i thought the dump file was created so i turned of computer off i rebooted got passed the POST and all seemed ok with the ram and drives then the screens when blank and constant rapid beeping from motherboard speaker so i turned off pc. booted back up into safe mode looked for the memory dumps for the blue screen event but it does not seem to have recorded it rebooted from exit key POST was fine when windows tried to boot same rapid beeping from motherboard. turned off pc unplugged mains lead pressed power button let the pc rest while i made a cuppa. re plugged mains lead started pc up and went into POST ok and booted into windows ok. im now trying to trace events in event viewer and trying to find the dump files at this present time pc seems to be ok i ran a system report but nothing out of the ordinary.
I know you can change the background image on the shutdown and start up screen but can you you have different shutdown and logon screens in Windows 7? I want to leave the start up screen alone but have a custom shutdown screen. Also can you change the 'Shutting down..." to say something else?
Out of the box, Windows 7 does not allow for the Windows Menu and Taskbar to appear independently on two screens when running on dual monitors in extended desktop mode. This forces one to have to move the cursor (sometimes a long way, if we're talking about high res displays) from the second screen to the main screen in order to access resources on the Windows Menu and Taskbar. Is there a registry hack that makes the Windows Menu and Taskbar appear on both screens while in extended desktop mode?
If not, I challenge the customization gurus around here to develop one. A couple of you rose to the occasion when I asked about changing the taskbar click behavior. This is saving me tons of time (even if time has no mass, and only wait)!
Ok i got one of those store bought laptops that comes with vista basic and a whole bunch of mess and non-needed partitions. So i decided to just install windows 7 over the top.
I started the install app, deleted all the partitions and created a new one using all the unallocated space. Then i installed windows 7 to the new partition.
It installed fine, booted for the first time, i was tired so i shut it down and went to bed.
The next morning i turned it on it looked like it was booting fine but then it went straight to start up repair, the start up repair went for about 30 minutes and said no solution could be found. I tried a couple more times, every time the start up repair would take longer to say the same thing, until it simply started blue screening shortly after "Starting Windows".
So i decided to try reinstalling over the top, i put the installation disk in started the setup it loaded files and said "Starting Windows" shortly after it blue screened.
So now i had no clue what was happening, i managed to get into start up repair somehow, don't remember, and got into command prompt, from there i formatted the partition deleting all files on the disk. I then tried to boot to check if the format was successful and it said no bootmgr etc was found, so i determined the hard-drive was now clean.
So i put the installation disk in and booted from it, same thing loaded files, "Starting Windows", blue screen. I have no clue what is going on here and would appreciate any help, i am beginning to think it is a hardware error og some sort.
I have installed 7 on my desktop. When i boot i get that new funky glowing logo. which is nice.
Now, when i install it on my acer one netbook i get the old drab vista bar.
Now would i be right in assuming that its something to do with the graphics card on the machines? If not can anyone point me in the right direction. Its not a problem to me im just curious as to why its done that.
i have a less than 2 month old pc having blue screens while in game memtest said ram was fine new hard drive fresh install works fine besides just random blue screens i recently switched from on board to an hd 6870 hawk msi card and new powersupply worked great for a week now blue screens that have me stumped ive been thinking the power supply i bought is junk but no real way to test it cause i get stable high framerates in game no overheating then screen goes blank then blue screen reboot