After downgrading my AVG antivirus to the free version I restarted. After restarting my PC will no longer load windows 7. After "Launch startup repair (recommended) kicks in it goes to a loading screen. After that it goes black then after a short pause I get a blue screen that says: STOP: c000021a (FAatal System Error) and basically says that the system has been shut down. I can get to my FOXCONN motherboard setup but cannot get to safe mode.
Lately explorer.exe has started to stop responding and crash randomly, when it does then it doesn't restart and I can't start it from the taskmanger/run/cmd and I have to restart or re-log to get it to work again.
today I have ran into a troublesome problem. When I turn on my computer, after 10-20 minutes it would BSOD then crash before I even have a chance to read it. After it restarts it will said that it is unable to boot and select a boot device. When I go into the BIOS the moment it restarts my hard drive would not appear there, but if I turn off the computer and turn it back on it would appear again as the selected boot device, but will soon later crash once more.
I purchased a Toshiba Satellite Pro which had Windows 7 Home Premium pre-installed from the retailer. It worked perfectly, and I had no problems. However, about 4 days ago, the hard drive failed, and I lost everything. This isn't the problem however. I took the laptop to have a replacement hard drive installed, and all a reinstallation of Windows 7 Home Premium. I received the laptop back a couple of days ago, and I had no problems with set-up. I noticed however, that whenever I try to shut the laptop down, or restart it (to apply changes features, configure updates etc) the entire laptop will become unresponsive on the "Shutting Down..." screen. The little blue circle will stop spinning, and none of the Brightness buttons, Cap Lock etc will function, so I know the whole thing has become unresponsive. This forces me to press and hold the power button everytime I wish to turn the laptop off, which of course is a strain on it. I have scanned the entire thing with MalwareBytes and Microsoft Security Essentials, so I know it isn't a virus of some kind (it wouldn't be anyway, as it was acting in this way before it was even connected to the internet.)
I have Windows 7 64bit and I am trying to set the system up to not automatically restart if it crashes and when it crashes to write a mini dump file. However after I deselect restart automatically and select mini dump and click ok and exit, I see that all settings are reverted to default settings.
The problem is that when I boot my PC it will go black and restart after getting to the windows logo boot part. If I try Safe mode it will get to SYSTEM32DRIVERSDISK.SYS and then just bluescreens and restarts again.Before it got to CLASSPNP.SYS but I tried to rename it to CLASSPNP.OLD and now it didn't really change much. I also tried using this code but it just tells me that some files are corrupt and it cannot repair it.If I try the automatic repair option it will just try and repair for a couple of hours and then say it cannot repair and rebooting the PC.
The problem is that when I boot my PC it will go black and restart after getting to the windows logo boot part. If I try Safe mode it will get to SYSTEM32DRIVERSDISK.SYS and then just bluescreens and restarts again.Before it got to CLASSPNP.SYS but I tried to rename it to CLASSPNP.OLD and now it didn't really change much. I also tried using this code but it just tells me that some files are corrupt and it cannot repair it.If I try the automatic repair option it will just try and repair for a couple of hours and then say it cannot repair and rebooting the PC.
I am trying to upgrade Vista to Windows7 Home Premium and I got this message after the installer copied ~2GB of files on my PC:
"setup can't continue. restart the computer and restart setup. when prompted try getting the latest updates."
I restarted the PC and restarted the setup and I got the same message. I updated the Mother Board Bios and restarted the setup I got the same message. I have tried both options (get update and no update during the setup). And it didn't work.
I do not want to do custom install (fresh install) on my computer.
I have Win 7 Pro on a Thinkpad T510 and I updated the Avast engine. It asked for me to restart the computer. It progressed as far as the "Logging off" screen an stopped. I have manually stopped the computer with the power button but when I power it back on I go to the same "Logging off" screen. I have a restore point but can't get to it unless I can start up the computer at least in Safe Mode. Unfortunately I don't have a boot disk. After years of computing this may be the first time I have needed one.
Bit of a weird one this. My PC won't restart. When I try to get it to restart, it will stay on the black screen right at the very beginning but with nothing else happening; no disk activity or anything. The only remedy is for me to switch it off via the power button and then switch it on again - it boots fine from this. It shuts down absolutely fine, and there are no other problems with my system at all. It's actually more of annoyance than anything else as there don't appear to be any other adverse effects at all. I am guessing it's a mobo issue, but really, I'm stumped.
my pc with a GA P35 dq6 motherboard with a 2.7 CPU intel celeron dual core with a radeon 5850 graphics card works fine until you restart. when you do a reboot or restart, the system shuts down and lights up then shuts down in a loop. it does not turn on. but when you shutdown and turn it on it works fine. only when you do a restart
I installed windows 7 on a brand new HDD,i updated all the drivers of chipset etc,the computer runs fine,but the only problem is that when i try to make it restart the screen goes black, the keyboard and mouse also,but the fan and the pc keeps running, i tried to set the bios to default but nothing,so i tried to restart it from the safe mode,from the same mode it loggs off ok but when the shutting down screen comes it freezes there,so i am guessing its the same thing happening to the normal restart. I tried uninstalling all the newly added programs but still the same thing,i tried resseting the ram but still the same
I've created an application like windows 7 toolkit and i need to restart all the process including explorer.exe(and all its child processes) excluding the application i've created.is there any batch commands or batch file that would restart all the processes running on my laptop except the one I've created.
I have windows 7 ultimate 64-bit on HP DV4-1199ee. The battery is connected and it is working on power is plugged on. When I leave the laptop for long time, I found the the laptop has restarted. This tell that the computer restart instead of sleep.
I have installed windows 7 on a very old HP compaq Evo and it works perfectly but only if I switch OFF and ON, if I have to restart it just don't switch back ON it gives me a black screen.
So I've been messing around with varrious drivers to try and get "RAGE" working and to make this tumultuous process more agravating I've somehow inadvertently uninstalled my USB drivers as well.This wouldn't be an issue, except that my computer has no PS2 ports.I used "GPU caps viewer" to check my driver version as I'd not noticed a change in my gaming performance and I was unsure if the 11.10 preview 2 drivers had been installed. "GPU caps viewer" said i was still running 11.8 which is what I had before I tried changing drivers last time. So I guessed that my drivers had not changed dispite the fact i uninstalled/reinstalled using the guide on the AMD /ATI site.So on a bunch of sites I saw people were using "Driver Sweeper" to get rid of the registry files and hidden bits of the ATI/AMD drivers. I used this application, it found; stuff removed it and then asked if i wanted to reboot. Which I figured after Uninstalling the Drivers and this program tooling around it was probably required sooner than later to finish the uninstall.At this point the drivers are "uninstalled" and the generic windows driver is working because my resolution/aspect ratio is stuck at 4:3 and wont go 16:10/16:9.AND more importantly my USB devices were all still working.I restart the computer and It loads windows and I try to type my password and nothing happens, The mouse cursor is in the middle of the screen and I can not move it, and there are no lights on my keyboard. The optical sensor in the bottom of my mouse Also does not light up.I restart again, and check the BIOS, all USB ports are enabled, so I try booting in to safe mode. I can use my keyboard to work in the BIOS, and to select "Safe mode with networking" (vs safe mode with out)When safe mode loads, same issue. No power to USB devices.I tested a bunch of devices; xbox controler; USB memory stick, external HDD etc. and none work.I don't know what to do; the mouse and keyboard work in the recovery partition installed on my HDD, but I really don't want to lose all that data. Ill probably end up using a live CD of linux to get my files and then format the PC if I can't figure out how to fix this.
The last few times I have restarted my windows 7 PC everything goes according to how it should, the desktop appears in under two minutes but nothing will work. I can click on any icon and nothing happens then after about 20 minutes evey programme I clicked on earlier will open one after the other. after closing these progs the comp performs normally, I noticed that even Ctrl alt and delete does nothing during this period of disobedience, anyone had this before? It's a hi-spec machine with 4 gigs of mem
it is a week or so that I have a problem with my PC.When I shut down the PC, instead of turning off, he restart.Before restarting, for a brief moment I can see a BSOD screen, but I cannot read it.After the PC restart, I see a small window telling me that the PC was restored due to an error. [code] A week and a half ago, I installed two add-on cards ( a PCI USB card and a PCIE USB 3.0 card), and with the PCI I has troubles to make it run, so I uninstalled it and I sent it back to the store.With the USB 3.0 instead everything was fine.I dont know if this is related to the problem I have right now.
I cannot restart my computer. I go to Start > Restart, it shuts down but it doesnt do anything else, i just get a black screen (as if it is suspended). So I have to press the button to shut it down and then press it again to turn it on.
I always wondering why did I have low fps in game until I restart my laptop. After installing MSI Afterburner, I realize that when I turn on my laptop, my GPU won't pass 70% in game(that means low fps). Restart fix the problem(95% all the time and no fps drop), but I didn't want to restart everytime I turn on my laptop. This is not random and happen all the time when I turn on my computer for the first time.
ASUS K43SJ i3 2310M 4GB memory GT 520M 1GB
p.s : Nvidia driver is the latest version, I tried reinstall/rollback new/old driver but it didn't fix the problem.
I plugged my external HDD into the USB port & the computer normally sees it right away, but this time it doesnt. I even just restarted the computer & it still isn't seeing it?
I ran the chkdsk /r upon next reboot.The DOS screen was displayed and running.I stopped watching the screen, and hours later upon checking, the screen is not displaying anything.The machine is a laptop hooked up to a docking station.I checked the monitor connections, they keep going to powersave, I undocked the laptop and the display there will not show anything either.The battery and wifi lights are steadily flashing.Windows 7 Pro x64..What is going on? is the chkdsk done? should i hard reboot the machine?
I've been having a problem with my USB ports not being recognized after a computer "restart". When the computer does a restart and brings up the sign-on screen the mouse and keyboard are not recognized until I manually turn off the computer by holding in the power button. When the computer is turned back on the mouse and keyboard both work property.
Randomly when I start up this laptop, a Dell XPS 15 running Windows 7, everything will lag graphically. When I minimize or maximize windows, it goes in slow motion. Interestingly, things like typing this post are not slowed down at all. Games play in slow motion, but songs play at normal speed. If I restart the computer, upon resetting everything works fine at maximum speeds. It seems to only happen after the initial start-up, but when it comes it stays and nothing I do can make it go away aside from restarting the computer.
I have tried updating my graphics drivers and going into the task manager and ending every single process on the list that wasn't protected. The former did not fix it, and the latter changed nothing.I have run the latest updated version of Microsoft Security Essentials and everything has come up clean.
I've had issues with my PC booting up for a while now but usually after a few restarts it would work right. A few days ago it stopped booting. It would get through the system startup but would stop at a black screen when it should be loading the OS. I reinstalled the OS and it worked on initial startup. But once the PC was restarted the problem came back. I tried changing out the hard drive but the same thing happened. I then used a friends computer to download an ISO of windows 8 developer trial. It installed fine but upon restart did the same thing. Although windows 8 said something about not being able to find some windows start file. I'd rather not spend money buying things if they are not necessary.
I have a Dell Inspiron 1440, and after it crashed while I was out for Dinner yesterday, I have been encountering so many problems..Yesterday, I was able to get back into my "Account" and access my desktop, but after a few minutes of being on, every single program/application I had opened turned "Not Responding" and stayed that way.
Now today.. I thought it had gotten better, so I did virus scans, registry updates, defragmenting, all of that, and my Laptop worked fine for a few hours. Then it became worse.
I scheduled a Disk Check, and when it finished, it restarted my laptop, but after the Windows Logo that pops up, all I get is a black screen and a cursor that I can move around. This not only occurs in Normal Mode, but Safe Mode, Safe Mode + Network, and Safe Mode + Command Prompt