my pc with a GA P35 dq6 motherboard with a 2.7 CPU intel celeron dual core with a radeon 5850 graphics card works fine until you restart. when you do a reboot or restart, the system shuts down and lights up then shuts down in a loop. it does not turn on. but when you shutdown and turn it on it works fine. only when you do a restart
View 3 RepliesI am trying to upgrade Vista to Windows7 Home Premium and I got this message after the installer copied ~2GB of files on my PC:
"setup can't continue. restart the computer and restart setup. when prompted try getting the latest updates."
I restarted the PC and restarted the setup and I got the same message. I updated the Mother Board Bios and restarted the setup I got the same message. I have tried both options (get update and no update during the setup). And it didn't work.
I do not want to do custom install (fresh install) on my computer.
I have Win 7 Pro on a Thinkpad T510 and I updated the Avast engine. It asked for me to restart the computer. It progressed as far as the "Logging off" screen an stopped. I have manually stopped the computer with the power button but when I power it back on I go to the same "Logging off" screen. I have a restore point but can't get to it unless I can start up the computer at least in Safe Mode. Unfortunately I don't have a boot disk. After years of computing this may be the first time I have needed one.
View 9 Replies View RelatedBit of a weird one this. My PC won't restart. When I try to get it to restart, it will stay on the black screen right at the very beginning but with nothing else happening; no disk activity or anything. The only remedy is for me to switch it off via the power button and then switch it on again - it boots fine from this. It shuts down absolutely fine, and there are no other problems with my system at all. It's actually more of annoyance than anything else as there don't appear to be any other adverse effects at all. I am guessing it's a mobo issue, but really, I'm stumped.
View 3 Replies View RelatedI installed windows 7 on a brand new HDD,i updated all the drivers of chipset etc,the computer runs fine,but the only problem is that when i try to make it restart the screen goes black, the keyboard and mouse also,but the fan and the pc keeps running, i tried to set the bios to default but nothing,so i tried to restart it from the safe mode,from the same mode it loggs off ok but when the shutting down screen comes it freezes there,so i am guessing its the same thing happening to the normal restart. I tried uninstalling all the newly added programs but still the same thing,i tried resseting the ram but still the same
View 3 Replies View RelatedI've created an application like windows 7 toolkit and i need to restart all the process including explorer.exe(and all its child processes) excluding the application i've created.is there any batch commands or batch file that would restart all the processes running on my laptop except the one I've created.
View 1 Replies View RelatedI have windows 7 ultimate 64-bit on HP DV4-1199ee. The battery is connected and it is working on power is plugged on. When I leave the laptop for long time, I found the the laptop has restarted. This tell that the computer restart instead of sleep.
View 5 Replies View RelatedI have installed windows 7 on a very old HP compaq Evo and it works perfectly but only if I switch OFF and ON, if I have to restart it just don't switch back ON it gives me a black screen.
View 2 Replies View RelatedSo I've been messing around with varrious drivers to try and get "RAGE" working and to make this tumultuous process more agravating I've somehow inadvertently uninstalled my USB drivers as well.This wouldn't be an issue, except that my computer has no PS2 ports.I used "GPU caps viewer" to check my driver version as I'd not noticed a change in my gaming performance and I was unsure if the 11.10 preview 2 drivers had been installed. "GPU caps viewer" said i was still running 11.8 which is what I had before I tried changing drivers last time. So I guessed that my drivers had not changed dispite the fact i uninstalled/reinstalled using the guide on the AMD /ATI site.So on a bunch of sites I saw people were using "Driver Sweeper" to get rid of the registry files and hidden bits of the ATI/AMD drivers. I used this application, it found; stuff removed it and then asked if i wanted to reboot. Which I figured after Uninstalling the Drivers and this program tooling around it was probably required sooner than later to finish the uninstall.At this point the drivers are "uninstalled" and the generic windows driver is working because my resolution/aspect ratio is stuck at 4:3 and wont go 16:10/16:9.AND more importantly my USB devices were all still working.I restart the computer and It loads windows and I try to type my password and nothing happens, The mouse cursor is in the middle of the screen and I can not move it, and there are no lights on my keyboard. The optical sensor in the bottom of my mouse Also does not light up.I restart again, and check the BIOS, all USB ports are enabled, so I try booting in to safe mode. I can use my keyboard to work in the BIOS, and to select "Safe mode with networking" (vs safe mode with out)When safe mode loads, same issue. No power to USB devices.I tested a bunch of devices; xbox controler; USB memory stick, external HDD etc. and none work.I don't know what to do; the mouse and keyboard work in the recovery partition installed on my HDD, but I really don't want to lose all that data. Ill probably end up using a live CD of linux to get my files and then format the PC if I can't figure out how to fix this.
View 2 Replies View RelatedThe last few times I have restarted my windows 7 PC everything goes according to how it should, the desktop appears in under two minutes but nothing will work. I can click on any icon and nothing happens then after about 20 minutes evey programme I clicked on earlier will open one after the other. after closing these progs the comp performs normally, I noticed that even Ctrl alt and delete does nothing during this period of disobedience, anyone had this before? It's a hi-spec machine with 4 gigs of mem
View 4 Replies View Relatedit is a week or so that I have a problem with my PC.When I shut down the PC, instead of turning off, he restart.Before restarting, for a brief moment I can see a BSOD screen, but I cannot read it.After the PC restart, I see a small window telling me that the PC was restored due to an error. [code] A week and a half ago, I installed two add-on cards ( a PCI USB card and a PCIE USB 3.0 card), and with the PCI I has troubles to make it run, so I uninstalled it and I sent it back to the store.With the USB 3.0 instead everything was fine.I dont know if this is related to the problem I have right now.
View 3 Replies View RelatedI cannot restart my computer. I go to Start > Restart, it shuts down but it doesnt do anything else, i just get a black screen (as if it is suspended). So I have to press the button to shut it down and then press it again to turn it on.
View 6 Replies View RelatedI always wondering why did I have low fps in game until I restart my laptop. After installing MSI Afterburner, I realize that when I turn on my laptop, my GPU won't pass 70% in game(that means low fps). Restart fix the problem(95% all the time and no fps drop), but I didn't want to restart everytime I turn on my laptop. This is not random and happen all the time when I turn on my computer for the first time.
ASUS K43SJ
i3 2310M
4GB memory
GT 520M 1GB
p.s : Nvidia driver is the latest version, I tried reinstall/rollback new/old driver but it didn't fix the problem.
I plugged my external HDD into the USB port & the computer normally sees it right away, but this time it doesnt. I even just restarted the computer & it still isn't seeing it?
View 2 Replies View RelatedI ran the chkdsk /r upon next reboot.The DOS screen was displayed and running.I stopped watching the screen, and hours later upon checking, the screen is not displaying anything.The machine is a laptop hooked up to a docking station.I checked the monitor connections, they keep going to powersave, I undocked the laptop and the display there will not show anything either.The battery and wifi lights are steadily flashing.Windows 7 Pro x64..What is going on? is the chkdsk done? should i hard reboot the machine?
View 2 Replies View RelatedHow to See What Your Windows 7 Restart Time is ?
View 0 Replies View RelatedI've been having a problem with my USB ports not being recognized after a computer "restart". When the computer does a restart and brings up the sign-on screen the mouse and keyboard are not recognized until I manually turn off the computer by holding in the power button. When the computer is turned back on the mouse and keyboard both work property.
View 2 Replies View Relatedwhn i start my pc its starts hang keyboard and mouse not work and after some time its get restart itself again again
View 2 Replies View Relatedmy hp laptop does not restart,but when I shutdown then startwhen I want to update windows then it does not restart,
View 1 Replies View RelatedRandomly when I start up this laptop, a Dell XPS 15 running Windows 7, everything will lag graphically. When I minimize or maximize windows, it goes in slow motion. Interestingly, things like typing this post are not slowed down at all. Games play in slow motion, but songs play at normal speed. If I restart the computer, upon resetting everything works fine at maximum speeds. It seems to only happen after the initial start-up, but when it comes it stays and nothing I do can make it go away aside from restarting the computer.
I have tried updating my graphics drivers and going into the task manager and ending every single process on the list that wasn't protected. The former did not fix it, and the latter changed nothing.I have run the latest updated version of Microsoft Security Essentials and everything has come up clean.
but everytime i reboot, a pop up apears asking me to run ... wich open soundmax wich asks me again are those let right speacke are those sub are.
View 1 Replies View RelatedAfter downgrading my AVG antivirus to the free version I restarted. After restarting my PC will no longer load windows 7. After "Launch startup repair (recommended) kicks in it goes to a loading screen. After that it goes black then after a short pause I get a blue screen that says: STOP: c000021a (FAatal System Error) and basically says that the system has been shut down. I can get to my FOXCONN motherboard setup but cannot get to safe mode.
View 1 Replies View RelatedI've had issues with my PC booting up for a while now but usually after a few restarts it would work right. A few days ago it stopped booting. It would get through the system startup but would stop at a black screen when it should be loading the OS. I reinstalled the OS and it worked on initial startup. But once the PC was restarted the problem came back. I tried changing out the hard drive but the same thing happened. I then used a friends computer to download an ISO of windows 8 developer trial. It installed fine but upon restart did the same thing. Although windows 8 said something about not being able to find some windows start file. I'd rather not spend money buying things if they are not necessary.
View 24 Replies View RelatedI have a Dell Inspiron 1440, and after it crashed while I was out for Dinner yesterday, I have been encountering so many problems..Yesterday, I was able to get back into my "Account" and access my desktop, but after a few minutes of being on, every single program/application I had opened turned "Not Responding" and stayed that way.
Now today.. I thought it had gotten better, so I did virus scans, registry updates, defragmenting, all of that, and my Laptop worked fine for a few hours. Then it became worse.
I scheduled a Disk Check, and when it finished, it restarted my laptop, but after the Windows Logo that pops up, all I get is a black screen and a cursor that I can move around. This not only occurs in Normal Mode, but Safe Mode, Safe Mode + Network, and Safe Mode + Command Prompt
I'm having a problem loading windows as well. My computer mid use was starting to seriously lag and when I restarted it it began the dreaded system repair system restore loop. It tries to repair itself again and again and then says it can't and asks if you want to shut it down. This has happened once before and it took me forever looking thru forums to find the solution. I just can't remember what I did. I wanna say I did something with a command line. I don't have a windows disc. And I don't believe I did a complete factory reset the last time either.
View 1 Replies View RelatedI was shutting down my laptop last night and there was a program (Adobe Reader, I think) that caused it to wait before shutting down. I left it assuming it would eventually shut down. I pushed the power button this morning to turn the computer on, and it says "resuming Windows" and then goes to the screen that says "Logging off". It has been hung up on that screen for over 30 minutes now, so who knows how long it did that last night when it was supposed to shut down. I can press and hold the power button to get it to power down, but when I press the power button again, it starts the same "resuming Windows" stuff all over again. I tried tapping the F8 button when it was restarting, but no luck. I can't use my computer at all, This is a pretty new laptop (Dell), so this is especially frustrating. Not to mention I have LOTS of work to do and I everything is on that laptop.
View 3 Replies View RelatedMy Acer Aspire S3-951 laptop has a few shutdown issues. It will not shutdown or restart, without manually holding down the power button. Windows seems to be shutting down, and then the screen goes black but the laptop is still running. Restart does not work unless i've installed something that requires a restart. It will not restart if i choose the option from the shutdown menu. I've tried to update all my drivers and i also updated the BIOS, with no luck. I have also tried to do a clean boot and uninstalling some programs that might be causing this.[CODE]
View 4 Replies View RelatedI haven't used this computer in about a month, but it doesn't shut off/restart when I start windows 7. It just says "computer is shutting down" and stays that way. A few things:
- I put my flashdrive in the usb and left it in today, but had the same problem without the flashdrive
- It will shut off at the log in screen, but that is it.
I have installed Windows 7 Ultimate (64-bit) on my workstation, previously running Windows XP professional. My problem is that it is extremely unstable; It randomly restarts - my screen goes black and then it restarts. I have installed Windows 7 twice - on the first install. I had gotten everything set up, all my programs (primarily video editing in nature- Adobe Master Collection CS3, Sorenson Squeeze and such) and my computer restarted. It froze and for a half second a scrambled screen appeared then it restarted. On restart it first said that it needed a bootable device cause it couldn't find one. On the second attempt at restart it would not allow me to load into windows it just came to the screen "starting windows" and remained there. On restart it gave me no option for start normal - just the option to repair system startup - or continue if it was just a power failure. The continue did not work. So I tried to repair startup - this would not work either - it said that windows could not repair itself. So I was forced to format my drive and reinstall.
On second installation - I thought I was safe. Then I had the same random restart. This time however, I repaired restart. It said that it was repairing my registry. But it must have monkeyed with it because it corrupted some of my programs. Then I continued to have the same freeze, scramble, reboot - only on the next several occasions it gave me a bluescreen. I tried after looking at forums to up the voltage of my ECC Ram (4gb - 2slots) from 1.8v to 1.83v (manufacture says they should run at 1.8v). This did not seem to help. I also tried running it with only one stick of Ram - worked for awhile over night, but then failed again the next day. I don't know if there is any relation - two failures were during system backup (from backup/restore center) and twice it failed when I was deleting from the trash. But then it failed at other random times as well. - However, It will work for extended periods of time - but then randomly quits.
I am trying to find the problem - but do not know where else to look. It appears to be hardware, but then I am not sure if it could be software related. I MUST get this machine up and running - Primary work machine.
Here are my Hardware specs:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
System Type x64-based PC)
[code]...
I restarted my computer and when i am logging on and the message "preparing your desktop.." shows up, it loads a little while but then it is only a blue background and down in the right corner this shows,"Windows 7 Evaluation copy. Build 7100 This copy of Windows is not genuine"
View 9 Replies View RelatedWindows 7 Professional 64bit When I try to perform a restart, the computer goes into oblivion. Drive light flickers a bit but I've let it rest over an hour and it didn't restart. Have to press the reset button. Otherwise everything seems OK. I've run deep scans with Malwarebytes and Kaspersky and no warnings?
View 4 Replies View Related