I am trialing Macrium Reflect because of its good reputation. I have a simple requirement. Backup to external hard drive (WD Passport), it is USB 2.0. Then use the Windows PE rescue CD to boot up and restore from external HDD. I have been researching this. I know about the lack of USB 3.0 support. But my drive is USB 2.0.
View 9 RepliesI am trying to access my BIOS,cannot use f8 or any f to access,cannot load from my original disc yet it loads when the hard drive is not installed?
View 8 Replies View RelatedI have a new HP Pavillion Slimline Model s5-1224 running Windows 7 Home Premium 64-bit on SP1 with Intel Pentium 2.8 Ghz processor, 6 GB Ram and and a 900 GB (800 GB free) HD. I have an external graphics card (Triton TRI-UV150) connected via USB to accomodate Dual HP 2010 Wide LCD monitors.
When the graphics card is connected to the CPU, it takes upwards of 1-2 minutes to load the homepage (Google). Without the graphics card connection, home page load is almost instantaneous.
I have uninstalled/re-installed the graphics card driver with the help of the manufacturers' tech support and the issue is still not resolved. Manufacturer states that "the driver cannot cause slow page loads" but it only happens when the card is connected to the CPU.
I made a slideshow with music of a trip my wife made to Italy and my when I inserted a DVD the computer only recognizes the disc as a CD with 700mb instead of 4.2 gbs. I used drive E. I tried Drive F and I keep getting that the disc is a CD of Sinatra, which I played last week.
View 3 Replies View Relatedi have the evaluation copy of windows 7, so when it expired i bought windows 7. i want to install it, but my dvd drive does not "see" a disc. my driver is MagicISO and the device manager says it's working and updated.
View 8 Replies View RelatedI'm not sure if this is in the right place to post but here I go. Over the last month, my disc autoplay has been not been acting properly. Whenever I insert a game disc, it will search for content and come up with autoplay options for pictures. For DVD movies it's normal but for games it is different.
View 9 Replies View RelatedI have Dell computer with HL-DT-ST DVD+-RW GSA-H73N SCSI CdRom Device...never had a problem with it now all of a sudden it wont recognize a blank disc...it will play a dvd movie with no problem...I uninstalled and then reinstalled the drivers which did nothing...also uninstalled the drive completely which didnt help either
View 3 Replies View RelatedI have a Windows 7 Disc that I've used in the past, but I'm planning on building a new rig in about a month or two and I'm just planning a little bit. So my problem is that my computer doesn't seem to recognize my CD during the boot. It use to ask me press a button to boot from CD but no longer does and but I can run the CD after my computer has booted to my desktop so that means It can't be the CD nor the CD drive correct? I do have the boot order set for the CD-ROM first.
View 13 Replies View Relatedwindows 7 is saying that the external drive is nor installed successfully
View 1 Replies View RelatedI have been using my WD External Hard Drive in my new Windows 7 desktop. Everything was working fine until this morning, my external HD stopped responding. Everytime I connect external HD to my desktop, I get " You need to format the disk H: before you can use it".
I've tried changing the drive name as well but with no success.
My 1.5TB USB( using the EZ-dock adapter) drive is about full, and I'm looking at a 3GB drive to replace it. My system is a Netbook with USB 2.0 as the only external drive interface so that limits my options considerably if I want to keep it to something I can throw into my suitcase easily when travelling.
View 1 Replies View Relatedi recently tried to upgrade my computer by installing a new OCZ Agility III SSD. I didn't really want to reinstall windows as it is an OEM install and I dont have the disk. I therefore took the supposedly easy way out and bought a OCZ SSD Upgrade kit which contained Acronis True Image HD software to "Easily Clone and Transfer Data" as per the front of the box.The existing drives were 2 Seagate 500GB drive in a RAID0 Configuration All seemed to go well with cloning the drive, booting off the SSD until I noticed that no mass storage devices I have were being recognised anymore, all of which worked perfectly with the old RAID0 drives.
I have tried everything that I can find on this forum to no avail, however, I am not a computer expert, but a reasonably competent home user. On my motherboard (Foxconn H67MP), I have 2 yellow and 4 blue SATA ports. At the moment, I have the SSD in a blue port and have left the old disks in a RAID array on the yellow ones as I think they are the only ports that support RAID. During the installation, I repartitioned the RAID drives to create a backup partition which may or may not be relevant?I have 3 External HD, 2 WD and an Iomega all of which worked before installing the SSD. The WDs are USB powered and the Iomega (shows in device manager as Samsung HD503HI) is externally powered but none of them show in disk management. I can see the drives in device manager with a yellow warning triangle, however not in disk management. I have tried uninstalling the drives, the USB controllers, disabling power management?
I'm having some trouble getting an external hard drive to be recognized by my computer. I have quite a few already, but I got another one because one of them won't read on my comp, although it will read on my netbook. The new drive I got has the same issue, no go on the comp, but works fine on the netbook.
I tried unplugging all of the other drives and even using the other cables to connect the new drive, but Windows 7 simply won't recognize it being plugged in. No "badump" sound and no icon in My Computer. Tried restarting, nothing. I tried it in all six of my computer's USB ports, but got no better result.
I've been all over the net trying to resolve this issue, and found many hotfixes,downloads from Microsoft and manufacturer, but to no avail. My external drive was recognized for the first month. Then, very suddenly, Windows 7 doesn't recognize it. It sees it, but prompts a "Need to Format before first use". It has 300G already used with valuable info.Tried moving the external hard drive to our home PC with Windows XP and the same "Need to Format" message is prompted. If I hook it up on my wife's MAC, I can see the data. Now I have read that this is a known issue with the 64bit version of Windows and external drive. I have already all the KB976972 and KB977074 download fixes from Microsoft. I have also tried to uninstall the drive, unplug it, turn it off, restarting Windows, and plugging back the drive, but I have the formatting prompt again. And if I choose to not format, i have an error message DATA ERROR (CYCLIC REDUNDANCY CHECK).**This does not seem to be an issue regarding only the WD drives but all drives**Called WD tech, and it was useless. Does anyone have a fix? A link to share? An idea? I'm running Windows 7 Ultimate 64bit on my HP Pavilion a6418f.
View 8 Replies View RelatedFor some reason my HP Laptop (Win 7 Home Premium) can't see/recognize my usb external hard drive (seagate). When I start/restart my computer and connected the usb cable into laptop, it shows the icon on bottom taskbar (safely remove hardware and when clicked on the usb icon, I see "open Devices & Printers and Eject USB to IDE bridge), but I can't see my drive at all when I click on "my computer"? I can only see it under "right click Computer, Manage, Device Manger, Disk Drives," it only says; "generic USB Disk USB Device". And when I expanded the USB controllers via Device Manager, I can see it under USB Mass Storage Device. Sadly, I can't do much there/here unless Win 7 can see/recognize the drive under "My Computer".<> HD is 40GB IDE Seagate (enclosure is PowerSpec 3.5 IDE to USB 2.0)<> Drive is only storage for data, documents, pictures and softwares/programs, etc.<> Drive is/was not formattedAgain, this drive was never formatted, only for storage purpose (i.e. pictures, documents, data, etc.). I can see it on my old computer when connected internal via IDE cable.
View 7 Replies View RelatedI am a MAC user but for a project I have to upload something on a PC...the external hard drive is recognized by the computer but I cant see the files on it...it is fine when I hook it up to the Mac..
View 1 Replies View Relatedmy external hard disk not recognised in my pc,but it working on other PC and lap tops
View 1 Replies View RelatedI'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
View 9 Replies View RelatedI have a HP Pavilion dm1z laptop. The laptop has a HDMI port. I am trying to connect it to my Samsung BX2335 display. The display has the DVI dual link port only. So I bought a HDMI - DVI adapter.I have Win7 x64 on my laptop.When I start the laptop with the external display connected, the picture is duplicated on both the laptop and the external display. But as soon as Windows starts, the picture will only be displayed on the laptop, 'Starting Windows' being the last picture shown on both displays.After some investigation it seems that windows could not detect the external display successfully. In the 'Screen Resolution' window the external display is shown as 'Display the device on: VGA'. It is impossible to view the properties of the external display, as the option is disabled, and the display is called 'Default Monitor'.I tried updating the AMD Radeon Catalyst drivers, but this did not help. Tried to install the external display drivers, but these installed as the mobile device display drivers.
View 1 Replies View RelatedI run win 7 sp1 on dell inspiron 1520 Its dvd-writer was damaged, so i bought an external Transcend dvd-writer and its working properly but when i insert a bootable cd in it and want to boot the windows from it, the windows does not recognize it and boots normally from internal hard driver as usuall. I am sure the cd is bootable and have tested it in other systems.
View 7 Replies View RelatedI have a HP Pavilion dm1z laptop. The laptop has a HDMI port. I am trying to connect it to my Samsung BX2335 display. The display has the DVI dual link port only. So I bought a HDMI - DVI adapter. I have Windows 7 x64 on my laptop. When I start the laptop with the external display connected, the picture is duplicated on both the laptop and the external display. But as soon as Windows starts, the picture will only be displayed on the laptop, 'Starting Windows' being the last picture shown on both displays. After some investigation it seems that windows could not detect the external display successfully. In the 'Screen Resolution' window the external display is shown as 'Display the device on: VGA'. It is impossible to view the properties of the external display, as the option is disabled, and the display is called 'Default Monitor'. I tried updating the AMD Radeon Catalyst drivers, but this did not help. Tried to install the external display drivers, but these installed as the mobile device display drivers.
View 1 Replies View RelatedI was running windows seven and my HD started failing so I bought a new one and had it shipped in. After recieving it today I backed up my old HD on to a My Passport I had lying around created my repair disk and set out to restore my new blank HD. When I got to the startup and repair menu I clicked restore from image and my computer scanned and could not find an image to restore from. The external is plugged in and I can see the backup files when it gives me the option to look for drivers but it wont recognize the external to let me load the files from it.
View 2 Replies View RelatedI use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
View 3 Replies View Relatedmy laptop was working now it won't print i can't access print manager, it won't recognise the external hard drive i can't get at the control panel, i've run a full scan alls well!? tried various prompts
View 1 Replies View RelatedI'm running Windows 7 Home N SP1 x64. I'm using an M-Audio Fast-Track Pro device to record audio into a music sequencer (Cubase 5), through a Shure SM58 Microphone. The M-Audio box is connected to the computer via USB. I've been using this set-up for about a year now and it hadn't caused me any problems until the last few weeks. For some reason Windows is not registering any signal from the input of the M-Audio box. The box itself picks up the sound and I can hear tapping on the microphone when M-Audio is selected as the output device, but not from the built-in speakers.
I first noticed the problem in the software (and thought for the longest time that it was the software). I'm very competent with Cubase and tried everything I could think of to get it to register with no avail. It was only when I tried to use the device on another sequencer that I realised that it's not the software. Then, since the mic works fine, the box itself is picking up the signal and out-putting it through itself, it must be something wrong with the computer or the OS.
I've re-installed the M-Audio driver, didn't make any difference. I've set the M-Audio as default in both playback and recording tabs in the sound control panel. Playback works fine. One thing that's really strange is that when I open manage sound drivers in the control panel and tap on the mic, neither the levels in recording nor playback even flutter, even though I can hear it pretty clearly through the headphones.
My computer does not recognize my WD1200B015-RNN external drive when I plug it in to the usb port. I now have windows 7. It previously worked on Vista?
View 1 Replies View Relatedmy laptop acer aspire doesnt recognize my external hard drive in windows7. I will be great ful to them. it doesn't show any external hard drive but it shows pen drive and mobile usb cable but not external hard disk
View 1 Replies View RelatedI have backed up my system image to an external hard drive which is 500gig and I have installed a new hard drive which is 500gig. The old one that I have removed is only 320gig so I know there is no issues there. If I try and restore to the old drive (320gig) it will try and restore but if I swap it over for the new one it will not start backup and I get the message 'The system image restore failed
View 9 Replies View RelatedCurrently I can create a Windows 7 restore disk onto a CD or a DVD. Does anyone know if it's possible to create it to a USB drive instead?
View 3 Replies View Relatedmy external hard disc not opening
View 3 Replies View RelatedMy external cd/dvd drive connected to my laptop won't recognize any dvds but will recognize cds. The computer says I might have to format it but doesn't show me how to do it.
View 1 Replies View Related