No Toolbar, Frozen Keys / "Windows Is Loading Files"?
Feb 26, 2012
My 13 year old daughter Lucy has just dropped her Dell Inspiron 1545 from a height of 15 inches (she tells me) !!. When she turned the laptop back on the first thing she saw was the wording "Windows is loading files", she has never see this before. When she gets to her login screen all she can see is the wallpaper, no icons, no toolbar, the cursor is visable and can be moved via the mouse pad and the brightness controls work but none of the other keys seem to work. No matter what I do I cannot view the toolbar or anything else for that matter and Lucy's tears are starting to form a large pool
View 1 Replies
ADVERTISEMENT
Aug 31, 2012
I don't know much about computers, so when I tried installing iTunes, and the computer completely froze, I shut it off manually, and upon restart, accidentally set all of the BIOS settings for my motherboard to defaults, now when trying to boot my computer, it gets stuck at the loading windows screen, I already tried reinstalling Windows 7..
Computer:
Intel Processor Sandy Bride-E Intel Core i7-3820 3.6GHz (Quad Core)
Intel Motherboard 2011 [x-fire,SLI] ASUS P9X79 [SATA III, USB 3.0]
Quad - Channel Memory 16GB (4x4GB) DDR3 1333MHz
Primary Hard Drive 1TB 7200 RPM
Graphics Card AMD Radeon 7950 3GB (Min. 650 Watt Power Supply)
Power Supply Standard 800 Watt
Operating System Windows 7 Home Premium 64 Bit
View 1 Replies
View Related
Jan 9, 2010
My network icon freezes on launch every now and then and when it does my PC is very slow it takes over 10 seconds to load a browser page, so basically the only solution is rebooting. is there any way to fix this?
View 1 Replies
View Related
Jun 4, 2011
When I first turn on my computer, I click on my homepage icon to take me to my homepage. I only get the toolbar and I have to drag the rest of the page down. If I want to look at something else on that page, I have to pull that page down to read it. If I want to go to another site after pulling down my homepage, the other site will fully load. This started happening over a week ago.
View 4 Replies
View Related
May 10, 2009
I have recently decided to try Windows 7 and made the necessary preparations. I am trying to build a dual boot system with the OEM 32bit Vista Home Premium and 64bit Windows 7. My machine is far above the specs and I have 3gb ram. I burned the image twice after reviewing the other posts in the forum. I burned the first on at 8x and after reviewing prev posts I burned again at 4x. Both freeze at the expanding files 0%. The first one would hang for hours until I told it to cancel. The new one hangs for a few minutes and then gives an error that there is a corrupt or missing file.I also read that this may be a result of ACHI but my bios does not allow me to disable.
View 7 Replies
View Related
Oct 19, 2012
My desktop view has some folders and Icons on the Desktop which I use and I cannot re-arrange and move them as stay fixed dotted all over my screen view or delete files on desktop in any method like drop and drag to recycle bin all seems frozen then I sometimes turn PC on and everything on desktops frozen then I reboot and can use but the icons remain fixed and unmovable in tradition drop and drag as you can grab but go straight back to the desktop positions.
View 1 Replies
View Related
Dec 14, 2012
I cannot move the unscanned files to chest. The apply button is frozen.
View 1 Replies
View Related
Nov 3, 2012
I have reference to searchqu toolbar in program files, and when it pops up it causes my PC to run erratically. The file is in program files, but cannot be deleted. I cannot find mention of it in the registry.
View 7 Replies
View Related
Oct 3, 2011
I have read a lot on this getting stuck. I had an issue with it getting stuck, so I had HP to send me the recovery disks and I backed everything up and did a clean install. It did its thing and now it is at the Windows is loading files screen. Bad news is, it has been on this screen since last night at around 8:00 (12 hrs), Good news is, it has been moving. I put a sticky note on the progress bar, even this morning it has moved about a half an inch. Should I be worried or just patient? It said it may take up to 3 hours and it has been 12 hours.
View 6 Replies
View Related
Aug 13, 2011
My computer would start to boot up"Windows is loading files" and get stuck. I would have to do a hard shut down after it sticks there for an hour. Anyhow, it would eventually boot up, all though one time I got a BSOD Stop: 21C error.For the past 3 days, no sound is coming out of my speakers. All of a sudden it is coming out of my HDMI monitor instead, I went and bought new speakers because I thought they had died. It is still doing it though. Even if I plug headphones in the front jack, I get nothing.
View 12 Replies
View Related
Feb 28, 2011
I have Dell XPS 15. I shut it down normally and then tried to switch it on.. but it is hanging up and getting Windows is loading files after the progress bar. I tested the memory tests and it has passed the test saying now error found with your memory.
View 2 Replies
View Related
Jun 17, 2011
I just put this computer together (check out my specs) and put the OS DVD in to install. It goes through the motions of "loading files" and then when it says "starting windows" it gets just to the point where you can see all 4 colored orbs and it freezes.How do I fix this issue and install windows 64bit?
View 9 Replies
View Related
Jun 8, 2011
I have created a shortcut to a jpg file. It opens fine when I click the shortcut.However, when I assign any key to it the key will not open the jpg although the jpg still opens when I click on it.What am I missing? Maybe this approach does not work with a jpg file.
View 4 Replies
View Related
May 27, 2009
I've been trying to install Windows 7 for days now...with no luck at all so far...and I'm getting quiet frustrated as you can imagine.
The installation always stops after the installer loads the files, screen freezes on the windows logo, and the progress bar stops immediately stops moving (or it freezes even before the logo is even fully displayed). The DVD then stops and no matter how long I wait nothing happens from there. If I run the text mode install, it stops on disk.sys.
I've looked everywhere on the net and tried many things:
unplugged anything not necessary during install (all usb, got rid of sound card, tried another graphic card, removed ram, switched ram position)
cleared cmos, no change
bios: disabled all unecessary (floppy (I don't use any) enabled/disabled parallel/serial port (for some it was a fix on other mobo's...or so I have read), messed around with lots of settings
tried other DVD drive, burned another DVD.
Now this issue isn't new to me, since I have never been able to install vista either. xp and ubuntu gave me a lot of problems too, but with xp pressing F7 during the initial loading would solve the issue and the install would run fine, on ubuntu adding no acpi would also allow install. With vista and windows 7 setup, pressing F7 during the file load doesn't apparently work, and I don't know how to bypass the acpi check.
If I try to run the install within xp, I get a compatibility report saying that my computer isn't acpi compatible...while the k7s8x bios clearly says it is. I tried enabling/disabling the acpi in the bios and it makes no difference (my bios is the last available, the 2.60)
I have seen people asking for k7s8x lan drivers for windows 7 on this forum, so I guess it is possible to install vista/windows 7 on this mobo after all.
Any suggestions welcome, as I'm completely out of ideas now!
View 7 Replies
View Related
Jun 10, 2012
I have just bought a new PC 5 hours ago .. I have bought everything GPU/CPU/MOBO/RAM/PSU/CASE .. only thing i did not buy was a HDD and DVD-Rom.. Because i own both and both are only 4 months old.. So i have put the new Parts together.. Then went to old PC , Formatted C drive.. Then added HDD and DVD=ROM from old PC to New one .. Booted and everything was fine except ofc no windows so gave the boot.msgr is missing thingy .. So i put in my Windows DVD .. Set it to boot from DVD .. It boots .. Goes through the "Loading Files" Then it shows me the Windows logo and stays there for a small while.. Then it suddenly turns black with a small gray bar at the bottom... and thats it .. it stays there forever and after some mins i can even here the DVD stops running.. I have uploaded a PIC to help u understand.. Also i tried installing from USB flash drive and same problem.
Here is the PIC of where i am stuck at *Notice the barely visible gray bar at bottom? : [URL]
XFX Pro 550W
ATI 6850
AMD FX6100
4GB of DDR3 RAM
AsRock 970 Extreme 4 Motherboard
Thermaltake Spacecraft VF-I Case.
View 2 Replies
View Related
Nov 4, 2012
andwhen i put it on it keeps going in windows is loading files then when it is finish it goes on the laptop starting page and goes back on windows is loading files
View 3 Replies
View Related
Feb 6, 2013
I just noticed my system has a bunch of registry keys as file names on Drive[CODE]
View 2 Replies
View Related
Sep 9, 2010
I'm reinstalling windows 7 ultimate. I try and boot from DVD and it loads files the the screen goes blank.
View 9 Replies
View Related
Aug 9, 2009
Windows 7 started to hang on loading screen, just before colored balls show up. So I put in windows 7 cd, made sure boot order was correct in bios, attempted to run repair, but cd loads to a black screen. So i make a bootable usb for win 7 try the same thing but it gets stuck at windows loading files. So I make a recovery cd on another computer with win7 as OS. Same problem. So I do memtest, surface test, everything checks out fine.
This whole time ubuntu will boot fine (Ive had dual boot working fine for over a year). I use ubuntu to get all the files I need of the host machine and use mini tools partition wizard to wipe the hdd thinking maybe i need a fresh install of win7. Same problem persists with failure of cd and usb of win 7. Trying a bootable usb of ubuntu, it works no problem, OS boots everything, flawless.
I continue to try to get windows working because i need it to remote in for work. On oddity is that if it the first time i boot the computer for the day the windows cd boots and i can install the OS but on the first restart it hangs at the same spot as above. This screams power supply issue, so I wipe the hdd again and swap in a new psu. Windows cd boots, installs, loads fine. I install chrome, steam, quicken, rename the computer which requires restart! and then it fails at the same spot. In retrospect I should have used to good boot to install chipset drivers, unfortunately i am yet to be able to get back into the OS via any means. Other things I have tried:
-Boot to cd with HDD disconnected.
-Boot to usb with dvd disconnected.
-Update Bios to latest version.
-Wipe the hdd with minitools, turn off computer, take battery out of mobo to reset cmos. Still no dice.
My problem with all of this is that the whole time ubuntu can install and works fine. I want this to be a hardware issue, but i can't figure it out. Only thing i can figure is its chipset drivers? But I need to be able to install the OS to run the asus installer.
View 18 Replies
View Related
Nov 22, 2011
I am attempting to install a fresh copy of Windows 7 on my laptop and am having multiple problems.The HDD is formatted completely empty.
1. When attempting to use the Reinstallation DVD from Dell, the DVD boots and the progress bar moves that says "Windows is loading files," then the computer restarts and it is stuck in an infinite loop.
2. When attempting to use a copy of Windows 7 on a USB drive, the drive boots up until you see the cursor to begin the reinstallation process, then the computer restarts and it is stuck in an infinite loop.
3. When attempting to use a Windows XP DVD, it starts the setup process, and then I get error: STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
I have been able to boot command line Linux distros (haven't tried any graphical distros) without any problems. Dell instructed me to run diagnostics on everything, and everything passed, so it doesn't seem like there are any apparent hardware issues. I tried pulling the battery and just using the power cord and also removing one of the sticks of RAM and attempting installation, but I have the same problems.
Specs:
Dell Inspiron 1545 (Late 2010)
Windows 7 Home Premium
Intel Core 2 Duo
320GB HDD
4GB RAM
View 9 Replies
View Related
May 5, 2010
When I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.
View 2 Replies
View Related
Sep 3, 2011
I'm new here.I couldnt find any solution for my problem anywhere and i thought i can find it here.
I have Windows 7 Ultimate 32 Bit and im trying to install it for about 6 months. I installed it once but after one week,os is gone and stuck at classpnp.sys
Here are the steps i followed when trying to install; Selected Boot Menu > CD/DVD
Seen windows is loading files. Seen Starting windows but its gone before the 4 colored windows logo comes.
And endless black screen. I also tried to boot from dvd in safe mode.It hangs at disk.sys I checked rams. I have 1 gb x 2 rams.There is blue and brown sockets for rams on my motherboard.
Both of rams connected to blue ones.When i disconnect one of them pc opens but same issue. When i disconnect one of them and connect it to brown socket pc didnt opened.
View 6 Replies
View Related
Oct 19, 2011
In am using Dell N5010 after i press the function keys the keys below that line that is numerical keys 1 to 10 and - & + (except backspace) are not working kindly advice what will be the reason
View 3 Replies
View Related
Mar 2, 2012
I was recently having some bad video driver issues (getting frequent BSODs after updating to the latest drivers for my 560 Ti), so I did a system restore. After the restore, I'm not having any problems with that, but a new one has popped up: opening any photo or video file in Windows Photo Viewer, VLC, or MPC-HC takes a while. There's a 10-15 second delay. In the case of Windows Photo Viewer, it doesn't open the program until then. With VLC and MPC-HC, the program opens but it takes that long to load the file. I've tried this on two separate hard drives, and opening the files with other programs (such as opening a local image file using Chrome) doesn't have the same delay. I've rebooted my computer several times, rebuilt my icon cache (which has fixed some similar bugs for me before), and checked that I didn't have an issue with color calibration (which reportedly slows down Windows Photo Viewer). Scanning with MSE turned up nothing. I can't do a system restore to any other point since this was the only one before I installed the new video card drivers that gave me even worse trouble.
View 3 Replies
View Related
Oct 7, 2010
i have a dell optiplex 780 desktop computer with 160GB hard drive and 4GB ram and its a 64-bit OS , I had a windows 7 installed on it but once my couzin used it and he put on a password on thw windows and then he obviously forgot the password but anyway i couldn't get in to my user so i googled and tried some ways to crack the password but didn't work so i kept restarting my computer to try new passwords and at one point my computer just wont work after the windows logo , Now it just goes blank after the windows starting up logo , so i decided to do a new clean windows 7 (32-bit) but when i choose to boot it from the CD room and it asks me to press any button to boot from Cd or dvd and i do press but after loading the files i get a blank screen and it would just stop, i can hear the cd running and all but no display
View 2 Replies
View Related
Aug 7, 2011
I've tried for 3 days to install windows 7 but it doesnt let me!i boot off the disc and it says "windows is loading files" then "starting windows" and it just shutsdown! i have to flip the PSU switch for about 5 seconds then flip it back then the computer will start
View 1 Replies
View Related
Mar 22, 2012
I am having issues with my laptop. Sometimes when i type the letters turn into shortcut keys and when i am in the middle of an important school asignment I loose my work, because i can't do anything. I can use my mouse, but when i try to use my keyboard it is almost inoperable. I have even tried to use an external keyboard and the samething happens. I have used Rkill, malwarbytes, norton and ccleaner, but nomatter what i do it keeps happening. The only way i have been able to temperarily fix it is to restart the computer and the problem can come back in 30 minutes or it can come back in 10hours . it even happens when i play games.
View 9 Replies
View Related
Jan 1, 2012
I've recently built a new system from scratch, I can verify all the connectors are plugged in correctly and powered. Today I went out and bought a small internal 24x dvd drive to install my copy of windows 7 home premium OEM with and this is where my problems began. Whenever I set the dvd drive as the first boot option and put the OEM disc inside it, the screen stays black and does a Windows is Loading files bar across my screen I believe twice at varying speeds then disappears and leaves me with nothing but a black screen. I've waited and have it still sitting there blank at this very moment. I have done a lot of googling and only seen one other person with this same issue have his problem solved by resetting his BIOS to default. Needless to say this didn't work. I've tried changing all the storage settings from AHCI to IDE to RAID and disabling/enabling some setting in each with no luck. Below are the system specs.
Motherboard: ASrock gen3 extreme3 Z68 chipset
CPU: i5 2500k 3.30Ghz
GPU: AMD Radeon 6950 came factory set to 870 Mhz core clock (overclocked from 800)
RAM: 4x4 GB Corsair Vengeance DDR3 1600 Mhz (I've also checked to make sure the proper voltage and frequency was used on these in the BIOS)
SSD: OCZ Agility 3 120GB
PSU: Coolermaster 1000W
Optical Drive: 24x Multiformat DVD/CD Writer with the obvious Sata connections to hook up to my mobo
This is my first pc build and I assume that asrock mobo's version of BIOS is UEFI.
Edit : I've tried removing 3 of my RAM sticks and now it just freezes with the grey bar fully loaded on Windows is Loading files. I then tried loading my old windows XP CD and it was working until it hit a BSOD which occurs consistently if I try to load XP. On more attempts at loading windows 7 it gets past the grey bar stage to the black screen not loading anything stage again.
View 5 Replies
View Related
Mar 10, 2011
Just after booting-up my system is prompting me that two dll files are not loading. I have investigated the necessity of the dll files and they have no relevance to the OS or anything I am using. How would I stop the system from attempting to load these files?
View 9 Replies
View Related
Mar 28, 2012
On my dell inspiron 15r the F1-F12 keys are covered by multimedia keys like volume, screen brightness, battery, internet, and other. I need to disable these because in some video games I play, I need to use these keys because they are set hotkeys that cannot be changed.
View 2 Replies
View Related
May 27, 2009
I've been trying to install Windows 7 for days now...with no luck at all so far...and I'm getting quiet frustrated as you can imagine.The installation always stops after the installer loads the files, screen freezes on the windows logo, and the progress bar stops immediately stops moving (or it freezes even before the logo is even fully displayed). The DVD then stops and no matter how long I wait nothing happens from there. If I run the text mode install, it stops on disk.sys.
I've looked everywhere on the net and tried many things:unplugged anything not necessary during install (all usb, got rid of sound card, tried another graphic card, removed ram, switched ram position)cleared cmos, no changebios: disabled all unecessary (floppy (I don't use any) enabled/disabled parallel/serial port (for some it was a fix on other mobo's...or so I have read), messed around with lots of settingstried other DVD drive, burned another DVD..My config is fairly old, but not old enough not to meet the basic requierments:Asrock k7s8x r3ati radeon 95001.7GB of ramNow this issue isn't new to me, since I have never been able to install vista either. xp and ubuntu gave me a lot of problems too, but with xp pressing F7 during the initial loading would solve the issue and the install would run fine, on ubuntu adding no acpi would also allow install. On XP and windows 7, I don't know how to bypass the acpi check.If I try to run the install within xp, I get a compatibility report saying that my computer isn't acpi compatible...while the k7s8x bios clearly says it is. I tried enabling/disabling the acpi in the bios and it makes no difference (my bios is the last available, the 2.60)I have seen people asking for k7s8x lan drivers for windows 7 on this forum, so I guess it is possible to install vista/windows 7 on this mobo after all.
View 3 Replies
View Related
