I have reference to searchqu toolbar in program files, and when it pops up it causes my PC to run erratically. The file is in program files, but cannot be deleted. I cannot find mention of it in the registry.
View 7 RepliesI've just bought a new PC which has Windows 7 installed so just finding my way about! My old PC was running XP and all my program shortcuts in the Quick Launch Toolbar had relevant icons on them. However, although some shortcuts I've put on my 7 QLT have appeared with the relevant icons, for instance FF and TB, 3 other programmes have just come up as blank cream coloured folders. So is there a way to get the proper icons instead of the blanks?
View 1 Replies View RelatedI have a program installed under "C:Program Files (x86)CompanyNameSWName". When the program runs it's supposed to copy some files, say FROM "C:Program Files (x86)CompanyNameSWNameDrivers*.abc TO "C:Program Files (x86)CompanyNameSWNameDrivers*.xyz
The program works on every machine it's been installed on, except for one (customer's) Win 7 64-bit machine. On that machine, nothing happens.
It's noteworthy that on that same machine an "insufficient access privileges" (or some such) message pops-up when an administrator trys to copy a folder to "C:Program Files (x86)CompanyNameNewName".
why this particular Windows 7 machine is being so picky? What should I have the installer do so that the application will be able to copy/rename its own files?
64bit application is getting installed in program files (*86). How to change the destination folder. Insta shield is not giving this option.
View 3 Replies View Relatedi was recently running windows 7 64 bit on my computer and just decided to switch to 32 bit 7. however i still have 2 program files. when i try to delete program files (x86) it tells me i need trusted installer permission. anyone have any ideas how i can delete the other program files?
View 7 Replies View RelatedGood/Bad of using Program Files (x86) vs Program Files
How do I know what to put where?
How do I knw if a program is x86 or 64?
Running Windows 7 64
I noticed there are 2 of these folders in local disk C:
when installing programs, which one should they go to? Are there differences between these 2 folders?
I am about to install Windows 7 (64bit) on my new 60GB SSD drive. I will keep a separate 1TB drive for all music, etc. and I intend to install most applications on the 1TB drive as well.However, since 64-bit windows by default has both a "Program Files" and "Program Files (x86)" folder for 32-bit apps I wonder if I could get in trouble by not installing 32-bit apps in the x86 folder?
View 2 Replies View RelatedTrying to understand why windows 7 has program files and (x86) program files. Using windows premium 64 bit.Sometimes programs get installed to program files and sometimes they go to (x86) program files what is the difference?
View 4 Replies View RelatedI have recently installed Win 7 Ultimate 64 bit OS. I have noticed it created two folders one "program files" and one "program files (x86). From what I have read so far the x86 folder is for 32 bit apps and the other for 64 bit apps. My question is:
I only want my OS and any critical apps on my SSD C drive so I created an E drive that I put all other apps on. On the E drive I have created only one folder "program files" and have been putting all other apps in it.
Everything appears to be working OK but should I have also created a folder x86 on the E drive and install all 32 bit apps in it or does the OS just know what to do regardless of the folder it is in?
Greetings Again,
My file and storage system is set up like this:
C: Drive - 120 GB SSD This is my Win 7 64-Bit Ultimate Boot drive. It has my most important Microsoft programs on it. Out of the 111GB available, I've used 42GB, leaving me 69GB free space. I want to keep this area open.
My next drive is a 1TB WD Caviar Black segmented into 3 partitions.
E: Drive = Program FIles This has the majority and rest of my programs. It also includes USERs Files. I've use 96GB out of 150GB. Out of that 96GB, 64GB are in USERS files.
F: Drive = Data Files. This stores all of my data except for media. I've used 91GB out of 350. I want to leave this be.
G:| Drive = Medsia FIles This stores all Media = Vids, Music, Graphics, Pictures. I've used 80 GB out of 500GB
I also have a 64GB ~ 55GB actual storage SSD drive that is partitioned but has no data on it or assigned drive letter.
Here is what I want to accomplish. i want to move my actual Program FIles to the 64GB SSD, assign it a drive letter, and keep the USERS files where they now reside on the F: dirve
My main concern is that in moving all these files around and splitting the USERS files from the Program Files that I'll mees up my Registry. Will someone please suggest some links I might read that will best help me acheive these moves.
Running Windows 7 Pro, 64bit.We have a package of scripts and programs that comprise a custom application for OpenOffice 3.2 (do not want to upgrade OO at this point). We must support our package on Win XP, Vista and 7.A bunch of our scripts start up OpenOffice by running the command: C:Program FilesOpenOffice.org 3programsoffice.exe (with arguments).Works fine on XP. Fails on Windows 7 because the OO program installs itself into Program Files (x86). Even if I change properties of the installer file, in the Compatibility tab, to Win XP SP3, AND tell the installer to put it in C:Program Files, Windows 7 still installs it into Program Files (x86). We would LIKE to have the same script work on both flavors of Windows. I know we can modify our scripts to branch on which Windows, and choose two different paths to soffice.exe, but that's messy.I can't solve it by creating a shortcut in Program Files, to the program in Program Files (x86); that's not allowed.Is there some solution in Windows 7 to find the program no matter which place it lives? Like, a semi-intelligent environment variable for ProgramFiles that looks in one place, then the other?
Ie.: "C:\%ProgramFiles%OpenOffice.org 3programsoffice.exe
I gave a try to the Setup Project of VStudio 2008 to create and distribute an x86 installer of a program I develop in Windows 7. After installing, uninstalling and executing over and over some of the features of my release distribution, I suppose I broke a windows registry or something related. I can't run anymore this app, whether from executing from the shortcut or directly, it just sends an error "Couldn't start the application correctly (0xe06d7363). Accept to close", there is no other option. Later I found out that moving exactly the installed content somewhere else out side the Program Files x86 dir, the application works flawlessly. Browsing, finding and deleting all references in regedit for my program didn't fix anything. I double checked my project is fine, and also created another installer version using the tool Inno setup producing exactly the same behavior; good install, error message when executing it inside the Program Files folder. Am clueless what else to do with the OS to fix this. Using CCleaner and/or my anti virus don't show any broken reference to my program, it seems clean. Can anyone help me?
View 7 Replies View RelatedMy 13 year old daughter Lucy has just dropped her Dell Inspiron 1545 from a height of 15 inches (she tells me) !!. When she turned the laptop back on the first thing she saw was the wording "Windows is loading files", she has never see this before. When she gets to her login screen all she can see is the wallpaper, no icons, no toolbar, the cursor is visable and can be moved via the mouse pad and the brightness controls work but none of the other keys seem to work. No matter what I do I cannot view the toolbar or anything else for that matter and Lucy's tears are starting to form a large pool
View 1 Replies View RelatedI tried doing this. Example, game files/data from my XPdocs on C: to my Windows 7 docs on D: couldnt do it, just gave me a chime, no dialogue box or anything. Also tried to move a file from my desktop to either mydocs or to program files folder, same thing. After that, even took ownership of all affected folders/files, ones being moved and destination folder. Still the same.
Question: is there some type of security setting i am missing? anyone else test this? I have moved files to mydocs before, and now i cant move anything to there, has me confused now. Nothing special about a file or folder i am trying to move, permissions ect.
Tried both cut and paste, and copy, same problem either way. No protected files/folders involved
I have 64 bit windows 7. I deleted dungeon siege 2 using the control panel, remove program. It was removed except for one file in Program files x86/microsoftgames/dungeonSiege2. I tried manually deleting it but get this "the action can't be completed because the folder or file in it is open in another program. Close folder or file or retry" There is nothing open. I clicked properties of the file and security and clicked administrator and get the same message. Never had this problem removing remnants of programs in xp.
View 1 Replies View RelatedI have a program that uses it's own library. The path to this library can't be changed, and it's inside the "Program Files" folder. And the software itself has to be installed inside "Program Files" too, otherwise it won't work correctly (it's a new release and still a bit buggy).Now, when I add something to this library, it's supposed to be present in the library folder. BUT Win 7 doesn't show me any files that have been created by programs inside the "Program Files" folder. The folder where the new library is supposed to be is empty. But the library is there inside the program, so it has to be somewhere.Now, how am I supposed to backup those files if I can't access them?
View 7 Replies View RelatedThe test result is under Windows 7 build 7000
1. Open backup and restore center
2. Set backup settings
a. Choose backup locations to local disk,for example f:
b. Choose [Let me choose]
c. What do you want to back up?
Only choose the folder of c:program fileswindows photo viewer
Do not choose [Include a system image]
d. Backup summary
Items are c:program fileswindows photo viewer
e. Save settings and start backup
Result:
There is no files under F:TEST-PCBackup Set 2008-09-29 032022Backup Files 2008-09-29 032022Backup files 1.zip
So, the question is why we can not backup this folder at the first time(it should be a full backup)
I installed Windows7- 64bit. Can anyone please tell me why there are two Program files on my Windows7?
Program files(normal) and Program files(x86). Should it be like that?
What is the difference between program files and program data [which is new].
View 1 Replies View RelatedI keep having to delete this Program Folder which is somehow reappearing but contains no programs in it. For some reason, I see an empty My Documents folder in there which seems to be created when I open Microsoft Word. Why is this happening? I know there is supposed to be a Programs folder and Programs (x86) folder, but why this third folder?
View 5 Replies View RelatedWhich should I choose when isntalling software (ex: photoshop filters/plug-ins)?What is the diference?
View 3 Replies View Relatedwhat is the difference between those two!?
program files
and
program files (*86) ???
OK my processor is 64 bit and i know that i can ran 32 bit software and someone has told me that due the Windows installation it makes the two separate program file folders ( for 32/64 bit)
OK, then which one is which? and why does it say
(*86) by the way?
which one of these are put 32/64 bit softwares?
Norton, malwarebytes, and spybot have all come up with nothing whatsoever, all fully updated.The laptop was running slow, so the user attempted to run Norton for a virus scan. Halfway through the scan, norton crashed. The user looked into the Norton program files to see that the directory folder was completely empty. He then called me.I attempted to uninstall norton, but windows wouldn't allow the uninstall. The program showed up on the list of installed programs, but upon clicking "uninstall", nothing would happen. So, I downloaded and installed RevoUninstaller and used it to remove Norton. I left the registry unchanged, and only deleted the temporary files and remaining program directory. The computer asked me to reboot.
Upon rebooting, every single file in my program files AND in my program files x86 are gone. Desktop links are all broken, and ask to be deleted when double clicking. When I go into the uninstall program list, all the programs are listed, but error when I attempt to uninstall or change them.The laptop is running Windows 7 pro x64, and I am currently copying program files from previous versions into the present directory to see if this fixes the problem, and will update accordingly
I've noticed that I have two program files. One just states Program Files and the other Program Files (X86). I believe that the one with (x86) pertains to the Win7 64 Bit however, is the other program file necessary? Since I have Win7 Ultimate 64 Bit don't you think that all files and folders should go to it?
View 14 Replies View RelatedI somehow choice my power2go program as the default program for all my programs. All my icons turned to power2go icon, I have done this before and in the past I would delete the program causing this (power2go) and the problem would be solved. I did this and nothing happened, the program was deleted but all my icons are now blank. When I go to open any other program I get the default box asking me to choose which program to use to open it. I mean for everything word, internet explorer, I mean everything. For example when I tried to open windows media player I get a box that says " The selected file has an extension (ink.) that is not recongnized by windows media player, but the player may still be able to play it. Because the extension is unknown by the player, you should be sure that the file comes from a trustworthy sourse. When I select yes I get windows media player cannot play the file the player might not support the file type or might not support the codec that was used to compress the file. When I try word I get the default box and when I select word it opens still how do I get the defaults restored. Some programs don't do anything they just time out. I did a system restore and nothing how do I restore my defaults for all my programs. Is there a way to make sure this never ever happens again. The box that say always use this program to open this type of file is not checked which it usually is I am afraid to check it for each individual program fearing I might make things worse. Is there anything I can do?
View 3 Replies View RelatedWhy do some programs which I download try to install to Program Files as is the norm, and others try to install to Program Files (x86), if they're all compatible with Win7 x64, and some are even specific to Win7 x64?Is there any harm in deleting the (x86) from the attempted destination folder when I download, so that I don't have two folders for my downloaded programs?
View 5 Replies View RelatedI have Windows 7, and I accidentally set my default program for a video game to open with as Windows Explorer... I know, long story. Now, every program and icon is Windows Explorer and I can't figure out how to get everything back to normal.
View 1 Replies View RelatedAfter I most recently restarted my computer, every program or file I try to open prompts me with a window asking for which program I want to use open the file, followed by a list of programs. Normally this would just be an inconvenience, because I can always just search for the same program I'm trying to open, but for some reason the "always use the selected program to open this kind of file" box is grayed out. I recently recovered from a virus, so I suspect this may be a side effect
View 2 Replies View RelatedI have a Windows 7 Pro box straight from Dell last month. It has a Program Files, but no Program Files (x86) on it that I can find. I displayed the hidden folders, and didn't see it there. Where to find it now?
View 6 Replies View RelatedI am trying to use this variable which I thought was standard for windows, doesnt seem to work for me.went to enviromental variables and added it to the system variables first (did not help) and then the user variables (nothing
View 2 Replies View Related