I have a new HP which is jumping back out of sleep every time. It doen't matter how it goes to slepp, on timer, start menu, power button... 30sec - 1min later it wakes up again.
Event viewer says that the wake up source is unknown. I have run an energy report but don't know how to fix the errors it is coming up with. I have pasted the report below.
System Manufacturer Hewlett-Packard
System Product Name p7-1010a
BIOS Date 05/17/2011
have a new Dell Inspiron 570 PC with Windows 7, and whenever I set it to sleep mode it will not stay asleep, i tried all settings, but still no luck.. In Task manager dell data back up is running even though I did not enable that.. Could that be waking it up?
I have a Sony Vaio laptop, obviously with Windows 7, service pack 1. It's a little over a year old I believe. It's 64-bit with 4 gb of ram.A few months ago I would say, the laptop stopped "staying" asleep. It's set to go to sleep when I shut the lid, and it does, however the slightest movement, even with the lid closed, causes it to turn back on. This happens if I move it into the case, or even carry it from one room to the next. I don't know if this is supposed to happen, but I just tried manually putting it to sleep, and before I could close the lid, it moved slightly and turned back on.Currently my only solution is to manually set it to hibernate
I have a perplexing situation with my three-year-old Toshiba laptop. If I resume working after allowing the computer to hibernate, a bit after that (maybe 10 minutes) the screen goes blank--no mouse--no background. Hitting Ctrl+Alt+Delete does not bring up the Task Manager. Nothing I do seems to work except physically shutting the on/off switch, waiting a bit, and rebooting. I get a message upon reboot that the machine was not shut down properly. The machine has an AMD 64 X2 Athlon processor 1.7Gb. I have 2 GB of RAM installed and Windows 7 Home premium.The drivers seem to be all up to date. I have an active antivirus/firewall running.What would cause such a problem? Any suggestions in solving the issue? This is driving me nuts. If I don't allow the computer to hibernateHere are some member answers to get you started, butplease read all the advice and suggestions that ourmembers have contributed to this question
I just reformatted my computer because it was having problems. I want the computer to stay at a balanced power level, so I selected the 'balanced plan' where it shuts the monitor off after 10 minuted and puts the computer to sleep after 30. When the computer is put to sleep, the wifi goes out, which is a problem for me. I was wondering if I could keep certain things running while it sleeps such as the wifi and other programs that normally stay on during the day.
most of the time I can sleep my computer and wake it up normally. Sometimes, though, when I come back it is actually shut down. When I restart, Windows 7 informs me that it has recovered from a serious error.A few days ago I watched this happen. I had slept my computer, and through no prompting of my own it started to wake up. The screen blinked on, and just as fast it went away. The computer shut itself down in a not-very-normal fashion.I did a bit of research here, but didn't find anything helpful. I did see how to attach log files and such, though, so here they are.
Where do I go to change the setting so I can charge a USB device through a USB port while my computer is sleeping or off? I have a gateway DX4860 with Windows 7. My Toshiba laptop had a popup that came up and asked if I wanted to change the setting to allow charging when asleep. I haven't gotten that on the PC and can't find it in the control panel.
I have two systems here running Windows 7. One system is older with a PS2 mouse. I think that is why my monitor will not stay off. I have gone into advanced power settings and turned off sleep, and made sure all my settings look right. I have also gone to device manager and un-checked the "allow this device wake computer" box for the mouse. The monitor still comes on when you touch the mouse. What else could be making the monitor come on? How do I make the mouse so it's less sensitive or disable it so you have to hit the keyboard to turn on the monitor?
The taskbar always stays on no matter what is open. Its really bugging me. I can't findsetting to make it hide when a program is open. I don't want to use the autohide feature. I windows xp it just let the windows open to max and would hide under what ever program was open.
I am about at wits end when it comes to this computer. I just built it like last week, and everything runs beautifully about it; that is, except that the dang thing won't stay turned off! I tell it to shutdown, and it turns itself back on after about two or three seconds. Let me clarify: the computer itself does NOT randomly shutdown, nor am I having problems with sleep or hibernate (haven't used them yet).
Ok, so I have tried about everything on every help forum I've read from here to knittingforums.com. I have disable all wake events, including the ones in regards to network adapters. I have disabled automatic restart, and even fooled around in the BIOS, disabling all wake events. I've even flipped around between BIOS commanded and OS commanded event wakes in the BIOS. About the only thing I can do is log off of my user account, and then do a hard shutdown. Even did the thing where you specifically set what the power button does.
So... please help! I will be most gracious, and will give any more information if necessary. The only thing I have NOT done is flash the BIOS; it won't recognize the USB device I have the updated drivers on.
I used to be able to press the power button, and my windows 7 would got "and stay" in sleep until I pushed the power button again. what to do to keep it in sleep?
I'm running win7 on an hp phoenix pc with 12 GB RAM, Intel I7-2600 CPU, SSD + 1 TB HDD. I've had the pc for about 6 months, but recently my icons are being shifted all to the left side of the screen. If I rearrange the icons to where I want them, they will all be shifted to the left side of the screen whenever i reboot. I was able to find on google. I also tried HP tech support and they were not able to fix this issue. Has anyone else found a solution to this problem? I've seen lots of others complaining about this matter, but all the proposed solutions seem to relate to unchecking the "align to grid" or "automatically align icons" options under the "view" menu selection on the desktop. None of these options work. Why is this happenning in the first place? The machine was not doing this in the first few months I had it. This only started about a month ago. Previously the icons stayed where i placed them
My clock stops "staying on top" after a couple hours after every time I boot. Since my taskbar is set to disappear, I like having a clock readily visible. Is this because I'm using a third party gadget, or is there a fix for this?
trying to make some basic changes to the screen personalization but they wont stick. I'm in administrator mode, by the way. Every time I log back in, they revert.In particular, Im trying to change the way a slideshow is displayed. I go to Desktop Background and change Position to Fit. I Save Changes and all seems to be well. I also save the desktop theme under My Themes. But when I log back in it goes back to Stretch. Am I missing some kind of permissions thing? Or do I just not understand how desktop themes get saved?
I have the setting "Hide Taskbar" selected, yet I find it often refuses to stay hidden. It seems like sometimes it will do this when an application/window wants to "tell me something", like that there's a new email (sometimes even when the "envelope" that indicates new mail isn't in sight), but sometimes it just seems to stay up for no reason, and I have to close all the windows one by one to get rid of it. Is there any way to get the Taskbar to Stay Hidden unless I'm mousing over it?
I have never ending problems with Win 7 Problem: I like to spread out my desktop icons - NOT align to grid! Procedure: right click desktop/view/uncheck align to grid/blablabla well I do it and then it rechecks after refresh immediately by itself and moves icons back to grid which i dont want. I ve tried different things nothing works so far.Also I: right click desktop/personalize/ease of use/change admin settings/CHECK: apply all setting to logon desktop - hit ok etc - The check mark DOES NOT STAY PUT.
Since windows 7 is coming out tomorrow, i might pick up a copy of it. I've been thinking if i should upgrade my Windows Vista Home Premium to Windows 7 home premium. Should i do the upgrade?
Also, if i do the upgrade should i do the upgrade option or the custom install option? i do want a clean system but i'm scared that my laptop would be mess up after doing that. What files get kept and/ or deleted when i do the custom install, anything i should watch out for. And what is the upgrade option, does all my files and programs get kept and just replaces the OS?
This new USB3.0 ext HDD seems to be in an almost constant state of Windows thinking it is unplugged, then just plugged back in, back and forth. I had to shut autoplay on it off because it would happen at least once a minute, sometimes 30 seconds, sometimes a couple minutes. The drive and case are brand new, but this is just like what was happening with my old drive via eSATA. I thought something was just wrong with the drive or my eSATA port, but now this. I know the USB3.0 port is fine because I have plugged in flash drives (even a 3.0 one) and connected other drives via 2.0 in it, with no problem. As for the eSATA ext HDD at least, this was happening a couple months ago before I wiped my system, and is still happening now. New OS install changed nothing.
These drives show up as known and installed in Device Manager. Disk Management's info is correct. Acronis is the same. Sometimes they just need a coaxing from "Scan for Hardware Changes" to even try to let me do anything. Windows Explorer, though, shows it all on its own, when it does think it's plugged in. (& yes, the plug fits quite snugly into the port, all is fine there.) Also, on my fiance's rig, both drives are also behaving exactly as the should. It's something over here...what could be causing my system to have trouble keeping these external drives onboard?
when you install windows 7 customly? or do you have to redownload it? microsoft won't let you download it if you're not a genuine user, so i want to keep it, if possible, so i can use aero.
Windows 7 Home Premium Already did all this from other posts DNS Client service started and on automatic SSDP Discovery service started and on automatic UPnP Device Host service started and on automatic Function Discovery Resource Publication service started and on automatic I also confirmed that IP version 6 was enabled.
Also checked and Base Filtering service is enabled
when i was running the windows 7 rc, everything ran well with my network settings.
today, i received my windows 7 party pack and installed the os. whenever i reboot the computer, i don't have internet access. i have to go to network and sharing center to go to the ipv4 settings to input the default gateway everytime. my nic is the integrated realtekRTL8168/8111 Family PCI-E Gigabit Ethernet NIC. at first, i used the microsoft drivers from the os. i did update to the realtek drivers, but the same thing is happening.
i've also ran various ipconfig commands, but nothing i've been able to do seems to help. anything i'm missing?
When I'm typing in microsoft office / outlook emails. my cursor will jump to another spot on the page and or sometimes jumps into a diferent window and continues there? This is worse than when I just had Vista. I upgraded thinking windows 7 was going to fix problems, and it hasn't. It's just a glorified versoin of Vista.
Constantly lose my connection to IP when going to other sites amd have to keep reconnecting. How to I get my IP to stay connect while the computer is in use?
So, as the title says, my desktop icons wont stay put. This only just happened 2 days ago, Sunday my icons were where I put them, and not moving on their own.Suddenly Monday they are auto arranged on the left side in no particular order.So, what is causing thisFirst let me say, I have already checked, auto arrange is NOT on. I've also not right clicked my desktop and clicked sort by >.This problem is happening on boot up, I can move an icon to a different spot, reboot and it will be moved back to the left side of my screen. I do have a dual monitor setup, I have a 22" asus monitor hooked up through HDMI to DVI (HDMI end is on the monitor), and then a 40" tv hooked up from HDMI to HDMI. Both monitors are running into a single HIS 6950 2GB model video card. I've had this working fine since last September.
The only coincidence I can think of that may have caused this is my graphic drivers. If my memory serves me correctly I updated from 12.11 to 12.12 for the ATI card Sunday night after it popped up and bugged me and I decided I wasnt lazy enough to have it remind me again a week later. So I went ahead and updated, all worked fine, shut down and booted pc back up the next day (Monday) and sure enough icons moved. either thats the problem or it's a huge coincidence. I'm going to roll the drivers back to the 12.11 version to test this theory but I was curious if anyone else had heard reports of this, or even experienced this problem themselves, and if so was it the same 12.12 drivers I mentioned or something else?
I have Win 7 RC Ultimate 64 bit for a while. Works great. The only problem so far is that it will not stay in "sleep" mode(not the hybernation). It goes there, the light on the box is blinking and after about 10 sec it wakes up. Can't figure out what wakes it up though. I dual boot on the same machine to Vista Home Prem 32 bit and it goes to sleep fine and stays there. So, I don't think it is hardware.
I just bought a new laptop. Samsung brand. It has Windows 7 Home Premium on it. I know this is a known issue with Win 7. I calibrated my monitor and saved the settings but when the computer hibernates, goes to sleep, or shuts down the display settings revert back to the factory settings. I've heard that the "Intel Common User Interface Module" aka "igfxpers.exe" is the culprit. However, most users have found that if they disable it in the startup tab of "msconfig" this solves the issue. But, this program is not listed under my startup tab. Does anyone know anything about this issue and how the heck I can find this program and get rid of it?
I have Internet Explorer 8 on Windows 7 but when I click on the drop down menus they will pop up but go away really fast and then sometimes they will stay
I got a new monitor recently - a Viewsonic VA2333-LED. I found that I didn't like the color settings and was not able to get the right color/gamma/brightness and contrast settings by using the monitor's menu. I have an Nvidia card, so next thing I did was to edit the color settings through the Nvidia control panel to just how I like them, I selected "Use NVIDIA settings", hit apply and saved the new settings. Looked great until I had to reboot my computer or it went into stand by at which point mysteriously the "Use NVIDIA settings" would become unchecked and my color was back to being an overexposed, bright white mess.
Next I tried the WIndows Color calibration. I went through the process saved the new color profile and set it as the default. Then, lo and behold, after my computer went to stand by, the color was right back to being crap. I even went so far as to delete the default profiles completely, leaving only my adjusted profile set as default. But again, when the monitor goes to stand by, the color settings that I created are lost. Here's the strangest part, when I enter the WIndows 7 color management screen, it still shows my profile as selected (even though clearly my settings are not applied). I have to uncheck the "Use my settings on this device" box and then recheck it and voila, my settings are back. And on top of that, my settings are only lost about 50% of the time that my computer goes to stand-by. On reboot, they work properly, but get lost half the time when the computer enters stand-by.
I had Windows 7 Home Premium put on my HP Pavilion a6500f last week. I had this same problem with Vista 64-bit but not with Windows XP. I have my file "Sort by" set to Name; Ascending but when I open a file it always moves to the end position when I close it. As an example say I have a folder named Book A. Inside that folder are files named Chapter 1, Chapter 2, Chapter 3, and Chapter 4 in that order. If I open and edit Chapter 2 when I close it the files are now in this order: Chapter 1, Chapter 3, Chapter 4, and Chapter 2. How do I make the files stay in the proper sort order? It's very irritating to have to move files back into their correct order every time.
