New HDD On USB3.0 Won't Stay Connected
Oct 26, 2012
This new USB3.0 ext HDD seems to be in an almost constant state of Windows thinking it is unplugged, then just plugged back in, back and forth. I had to shut autoplay on it off because it would happen at least once a minute, sometimes 30 seconds, sometimes a couple minutes. The drive and case are brand new, but this is just like what was happening with my old drive via eSATA. I thought something was just wrong with the drive or my eSATA port, but now this. I know the USB3.0 port is fine because I have plugged in flash drives (even a 3.0 one) and connected other drives via 2.0 in it, with no problem. As for the eSATA ext HDD at least, this was happening a couple months ago before I wiped my system, and is still happening now. New OS install changed nothing.
These drives show up as known and installed in Device Manager. Disk Management's info is correct. Acronis is the same. Sometimes they just need a coaxing from "Scan for Hardware Changes" to even try to let me do anything. Windows Explorer, though, shows it all on its own, when it does think it's plugged in. (& yes, the plug fits quite snugly into the port, all is fine there.) Also, on my fiance's rig, both drives are also behaving exactly as the should. It's something over here...what could be causing my system to have trouble keeping these external drives onboard?
View 4 Replies
ADVERTISEMENT
Jul 16, 2011
I've noticed that my Logitech optical mouse jerks when my Western Digital Essentials external harddrive is connected to my Bufallo USB3 PCI board (IFC-PCIE2U3). I've updated the board's firmware and driver. I'm using Windows 7 64bit. The optical mouse is connected to a separate USB2 motherboard port.
View 6 Replies
View Related
Feb 12, 2012
Constantly lose my connection to IP when going to other sites amd have to keep reconnecting. How to I get my IP to stay connect while the computer is in use?
View 1 Replies
View Related
Jan 2, 2011
i bought a new toshiba laptop satellite c660/c660d its very slow and i cant connect to my wireless network iv tryed changeing the wireless channels my network provider is eircom i really dont know wat to do now it works when i plug it in
View 8 Replies
View Related
Feb 20, 2012
So here is the deal: about 6 months ago I purchased a brand new laptop and connected it to my DLink router that has been working on our PC for about 3 years now. I also have 2 Playstations and 2 other laptops connected to the D Link (all of which are working fine and NEVER have any problems whatsoever). About 3 weeks ago, I turned my laptop on and tried going online, but much to my surprise, it couldnt connect. Its supposed to automatically connect, but this time it didnt. I figured I would manually connect it. I opened up the window that displays all the routers that the laptop is picking up and i saw my D Link so I try to connect. It attempts, then says "connected" and the after 3 seconds or so, it says "Limited Access". I thought it was a problem with the internet so I checked the other laptops in the house and the Playstation and they are all working fine. I figured it was my laptop so I shut it off and restarted it but it did not work. Next, I tried unplugging the router and waited for 2 minutes or so and plugged it back in. Yay! It worked! I solved the problem! I began surfing the internet for a couple hours when, BAM! It suddenly went out again. I figured I would unplug the router once again to see if it was just some kind of glitch and would work fine this time. I unplug it and repeat the process over again. after 2 hours, it goes out. Everything else in this house seems to be working just fine on the router with no problems whatsoever, except mine. I have not messed with any of the configurations because I have not idea where to even begin so I know it cant be with the configurations. My laptop is new with windows 7, I'm using xfinity as a provider.
Side note- I did a test and when I cant connect to the internet with my laptop it fails a "PING" test (no idea what that is), but when I unplug and plug up the router and the internet is fine on the laptop, it will pass the "PING" test.
View 1 Replies
View Related
May 29, 2012
I've done manual reconnection (NEVER WORKS) and Troubleshooting (hardly ever works). I've tried disabling and reenabling the wireless and restarting the computer. Nothing can seem to prevent these problems from happening. Sometimes the network won't even show up!
I can't fathom how it's possible to SOMETIMES detect the network and SOMETIMES connect to it. I've thought of purchasing a repeating (quite pricey if you ask me) or perhaps using an antenna extension cable. Not sure either would be successful in alleviating my problem.
Finally, and the most odd thing, is that when the router was in the basement, I actually got a better signal even though it was LOWER than before. Not sure if this was because it was connected directly to the phone box, but the router is back on the first floor and the problem persists daily.
View 5 Replies
View Related
Jul 24, 2011
I have a pair of wireless bluetooth headphones (Sony DR-BT22) and it won't stay connected to my computer. I used to turn it on and it would connect automatically I could listen to my music and everything was fine. Now my headphones won't connect automatically I have to go to my bluetooth click on the device and click connect for them to connect. Not only that but if I close the page that has the connect/disconnect options it will automatically disconnect and i have to reopen the device page and click connect again to get it to work
View 1 Replies
View Related
Jun 7, 2012
My computer has been acting up lately,I haven't made any changes to my computer or anything but it seems to just not want to connect to the inter for more than 5 min. My othe computer on the house seems to connect fine, but mine will only connect for 5 min the can't find the network for 15 min and it does this repeatedly. I tried updating the drivers but there were no updates available. I ran the troubleshooter and it couldn't find a problem, it just said to make sure I was in range of the router, which I am because my computer was working fine in the same spot about a week ago.
View 12 Replies
View Related
Sep 10, 2011
My computer - HP Pavilion P7-1010. Windows 7 64bit home edition..My Laptop - HP mini 1000 with XP I play this game, Trickster Online.. and they have a "stay connected for 100+hrs" event..On my laptop with XP, it will stay connected until I Disconnect it.On my PC, it will stay connected for like 5-20mins, then log everything out. EVEN if i am still using the internet.. (its not Idle!)
I've tried the following:
-Turned off "Disable this to save power"
-Turned all my Windows power settings to "never hibernate, no screensaver, etc" even no shutting off of the monitor.
-Tried Wireless and wired, (Both same results)
-Reformating the computer to get rid of any rogue programs messing the net up
-Updateing drivers and Windows
View 1 Replies
View Related
Jan 9, 2013
1) Since about 2-3 days ago, my laptop wouldn't stay connected to wireless once I put the laptop on standby. I have to connect to it each time I open my laptop. This has never happened before so I feel like something went wrong.
2) My wireless won't connect to any other connections other than my home. I went on a ski trip recently, and while my wireless worked on my iphone and ipad, my laptop wasn't able to connect to it. I feel like this laptop has a lot of weird configuration problems. It also won't connect to my home network unless SSID is disabled. So this brings up the question, will my laptop never be able to connect to any network that has SSID enabled? This is really weird and frustrating because my laptop used to be able to connect to my home router fine while its SSID was enabled. I don't get what happened to it. This is troublesome because that means that I will never be able to use wireless anywhere else other than my home.
my settings regarding wireless? Does anything seem abnormal?
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJustin>ipconfig/all
Windows IP Configuration
[Code].....
View 1 Replies
View Related
May 26, 2009
when I lock my laptop so no can get in to it at home, when I unlock it, it will not be or reconnect to the network(wireless) how do I fix this?
View 3 Replies
View Related
Feb 23, 2012
i have a samsung laptop running windows 7. i have a netgear modem and router. all of my other devices connect with no problems but my laptop wont stay connected. it will connect for a while and then it will disconnect.
View 16 Replies
View Related
Nov 8, 2012
I hope someone can help me with this. I work from home (office is 70 miles away), and my Lenovo T420 Windows 7 will not stay connected via WiFi to my Verizon MI424WR ver I router. I had this problem with my old router (MI242WR rev E), and I was able to fix it by turning off the Power Management option to "power off to save power" My Lenovo is using Centrino Advanced-N 6205 Wifi chip. It reads as "working properly".
It seem obvious that there is an issue between the Lenovo and the new MI424. I have 10 other devices connecting to the MI424 without a problem. I have shut down devices to ensure that their is not an over burdening the AP issue.
Specifically, the Lenovo successfully pairs with the MI424, tries to establish an Internet connection, fails, and drops the connection (or the router does - I assume it is the laptop.) It's worked great for about 4 hours this am, then it quit working. I:
- shutdown the laptop, pulled power and battery
- shut off the network, pulled the plug and let it sit for a while
- restarted everything and the issue will not go away
It works fine @ work with a Cisco Network.
My company uses some McAfee SW for laptop security. Since I was blissfully working for hours and this just started up, I do not think that has anything to do with it.
View 1 Replies
View Related
May 24, 2012
My new laptop running Windows 7 Professional and it is not easily recognizing other workgroup computers. When, and if, it does, it does not staying connected to other computers and a wireless printer on my workgroup.I have a desktop that is running Windows XP Home. It is sharing its printer and external hard drive to all computers in the workgroup. When I got on the router, I was able to get the Windows 7 machine to see XP box long enough to map a drive and load the printer. After rebooting, Windows 7 did not recognize the drive map or the printer. I pinged the XP box and got Destination Host unreachable. The only thing I can ping is the router. Also, when I went to load the wireless printer (with Windows 7 drivers) it did not see the printer even though the printer�s connection light is on. I have two Vista Business machines and one Windows 7 Home computers in my workgroup. These are not having any problems. From those other machines, they can ping each other but they cannot ping the new box.It is acting like a setting in Business has it isolated itself and is not allowing traffic. I have searched this problem and it seems to be common but I have not seen a post addressing the Business question. I have tried everything that the help files and forums stated (setting discovery, disabling IPv6, disabling firewall on both, uninstalling virus protection, etc.) with no result. Is there a setting in Business that would prevent it from being visible?
View 1 Replies
View Related
Aug 7, 2012
For some reason my USB 3.0 4-port hub is being seen as a USB 2.0 hub. I've tried unplugging the usb 3 cable and rebooting and reattaching the cable to my USB 3.0 Card, but it still sees as a USB 2 hub
View 4 Replies
View Related
Dec 10, 2012
I have a nice new Gigabyte X79-UP4 motherboard, and it is behaving for the most part, however the USB3 ports are not working. Drivers for the port installed fine (from the disk that came with the motherboard) however it is not recognizing either USB3 or USB2 peripherals.
Device Manager reports that the USB3 ports are fine -
I did download the newest Fresco Logic drivers from Gigabyte and the package failed on install with the message below -
Even though the installer failed I was able to go through Device Manager & update the drivers, but unfortunately there has been no improvement in functionality - USB3 and USB2 still do not work.
I have tried several installer packages, from different locations, and all have failed!
View 1 Replies
View Related
Jan 12, 2012
I put in a SSD drive and now my two USB3 drives don�t work. I hook up the 2 USB3 drives and installed the drivers and one work for a little while but the other wouldn�t work at all. With the other hard drive I had in before that my Windows 7 was on both USB3 drives work just find. I called up Western Digital and you only have a 30 day tech support and can buy one for $14 or send them in. But they work fine until I put in the SSD drive.
View 2 Replies
View Related
Feb 7, 2012
I recently, well I say recently but it was late 2011 I decided on building a new RIG, the final hardware change was my external HDD which I bought last week and a couple of days ago I connected and copied everything from my old HDD to the new one. It's insanely fast, USB3.0 is really fast. Although, coupled with Buffalo utilities it's even faster.When I restarted my system after configuring everything in the Buffalo utilities I restarted and it was fine everything was working as it should be until I used my PC today and it booted really slow. In fact it was so slow I had to reboot it again and it was even slower than before. I disconnected the HDD and rebooted and it was there in a flash...? Okay, this is odd, I have come across this before with an external HDD but this is the first time that I've encountered a problem with USB3.0.Scratching my head and coatie I pondered on what is potentially causing the problem, I then had a EUREKA moment. The Buffalo utilities use RAMDISK which is basically a virtual HDD which uses RAM. I delayed the boot of Buffalo Utilities and rebooted and it was fine. Whatever is causing the slow boot it's being caused by Buffalo. If I delay the loading of the software it's fine.
View 1 Replies
View Related
Oct 13, 2012
i recently bought a USB3 2.5" 1TB toshiba drive and it works fine on my USB3 ports but it doesn't work on my USB2 ports. Non of the people i have asked seem to know why. i Have 3.5" usb3 2TB that works on both USB3 and USB2, so the only thing i can think of is that the 2.5" draws more power from the USB3 ports thus allowing it to run.
View 2 Replies
View Related
May 31, 2011
I am having trouble installing win 7 on an ssd drive attatched to usb 3.
View 3 Replies
View Related
Mar 17, 2012
I need a GOOD usb3 card and front bay hub for my computer. Bought a SIIG SuperSpeed USB 3.0 Bay Hub+Host Kit Model JU-H40411-S1 back in Nov but have had major problems with it from day one and now believe it was partially responsible for trashing my Enyo and SuperTalent RC8. Over a month now of dealing with Siig has gotten me nowhere. The unit is totally dead, not recognized by anything and they keep wanting me to do a 32bit firmware upgrade. I keep telling them that I am running a 64bit Windows 7 Pro but that does not seem to soak in. Absolutely the worse customer service I have ever dealt with since 1969. I have about decided that no one makes a good quality add-on setup but am hoping I have missed something in my research. Really hate to dump my motherboard in order to get front usb3 ports.
View 1 Replies
View Related
Aug 7, 2012
i have the drivers downloaded. ive gotten it to work once but then i ended up deleted the amd driver thinkinin i didnt need it.
ive did the registry that everyone talks about. no luck. when i set my motherboard to ahci in the bios it never recognizs my hard drive only my optical dvd drive.
View 5 Replies
View Related
Feb 22, 2011
i have a brand new toshiba laptop connected wirelessly. however it keeps showing connected however no internet access.i have a notebook as well that is brand new and it connects no problems what so ever.im using windows 7 home premium and 64 bit os.
View 1 Replies
View Related
Jun 17, 2012
I connect an external device that supports USB3.0 to an USB3.0 port on the computer/mother board using an USB 3.0 cable. I can see in the device manager that there are (intel) drivers that support USB3.0. The external device (WD mypassport) advertises USB 3.0 support. Is there a way to find out in windows 7 (home premium) if the actual usb connection is really using USB3.0 or if it is falling back into USB2? Is the transmission speed in the USB connection the only hint about what is happening in the USB connection. That is, a higher speed means that USB 3.0 is really being used?
View 2 Replies
View Related
Mar 26, 2011
I tried installing my NEC USB3 3.0 Host Controller File after a repair/upgrade install. Now, I get the above error during the driver setup. I downloaded the driver directly from Asus.
View 3 Replies
View Related
Jan 8, 2013
just recently I had the power connection fail on an INTENSO USB3 ext drive -- as it was a 3GB drive I didn't want to lose all the data on it.Anyway I cracked open the case and it was simply a 3GB SATA Barracuda 7200 RPM normal HDD with a power and USB connector card embedded in the case.So I just removed the HDD and connected it up into a SATA slot on my desktop and it works fine as an INTERNAL drive (still fast too).Also frees up a valuable USB3 slot on my computer. (I only have 2 USB3 slots so each one is valuable).If I really want to use this as an external drive then I'd just get another SATA==>USB3 enclosure --but the disk is a bit heavy to use as a portable.
( I got the INTENSO drive for 70 EUR -- so even breaking it up it's still a bargan for a 3TB Barracuda SATA drive - whish Id' bought to or 3 of these and converted them to INTERNAL HDD's. !!).eems most of these larger external powered (not self powered) USB drives are simply normal HDD's contained in a SATA==>USB2 or USB3 container.
View 4 Replies
View Related
Jan 31, 2012
I have a problem with the sound on my board "popping / clicking sound" like when you power on your speakers but it's constantly does that and even when on standby...I will start from the very first day when I built my PC.Well I built my PC from following parts :
Motherboard: ASUS MA578L-M/USB3 PSU: ALPINE 700W
RAM: Corsair XMS3 2x2GB 1600MHz 1.65V
GPU: Gainward nVidia GTX 550Ti 1GB / 192bit Golden Sample (also knows as "GS")
CPU: AMD Phenom II X4 955 Black Edition 3.2GHz / 8MB Cache
HEAT-SINK: Coolermaster Vortex Plus CPU Cooler
DVD driver: Pioneer DVR-S19LBK which is LightScribe as well
HDD: Samsung Spinpoint F1 don't know which model exactly but spec. > 1TB / 7200RPM /3Gbps.
From the very beginning I had Windows XP 32bit (and of course all of my 4gigs didn't worked, and also I've been suffering sound delay eg. you've been shot and you see that but you'll hear it in about 2 seconds, so NOT GOOD) then I went on Windows 7 Ultimate 64bits (note that I haven't got a speakers JUST > HEADPHONES) so it solved the problem with RAM's (I can use all of them properly now) and I am happy with that, but it was annoying to be sitting all the time on the headphones, so I bought "Logitech X-530 5.1 speakers BRAND NEW ones. And the story began from that moment. I started to be hearing weird sounds and the sound takes a half of a second like "popping/clicking or beeping" or I don't know how it would be called like"..So I tried to bring whole motherboard back to the shop where I bought them, left it to them..After a couple of days I'm back and got told like "the thermal paste was on cpu's socket and cpu's pins "SOMEHOW" ?!?!?....got told again that I could choose that "Motherboard would be sent to ASUS supplier to clean the socket", but CPU I needed to clean my self but the guy was not too sure about my cpu's life and will it work properly or I don't know.. So it is sent now "the MOTHERBOARD" but I've been told to wait for it for another 28 days to get it back, but I couldn't wait for that much and I bought another one, exactly the same one I got sent but just BRAND NEW ONE. So brought home, CLEANED CPU TO THE CONDITION AS IT WAS NEW, added a bit of thermal paste on the surface of cpu, inserted everything onto they belonged positions "ABSOLUTELY EVERYTHING AS IT SHOULD BE" = GOT THE SAME POPPING SOUND.....Well then I tried my friend's exactly the same cpu as I have "AMD Phenom II X4 955 Black Edition etc." = SAME POPPING SOUND..So I'm getting to the conclusion that I need to check "THE RAM MODULES" Cause: NEW MOTHERBOARD SAME CPU *friend's one is doing the same popping sounds as my one (I've even tried my cpu on friend's computer and it goes well just 110% well as it should be")
View 2 Replies
View Related
Nov 12, 2008
I just noticed this that when you open the network from the desktop it says its not connected but when you click on the network icon in the taskbar it says its connected is anyone else having this problem.
View 3 Replies
View Related
Feb 15, 2012
I have a new HP which is jumping back out of sleep every time. It doen't matter how it goes to slepp, on timer, start menu, power button... 30sec - 1min later it wakes up again.
Event viewer says that the wake up source is unknown. I have run an energy report but don't know how to fix the errors it is coming up with. I have pasted the report below.
System Manufacturer Hewlett-Packard
System Product Name p7-1010a
BIOS Date 05/17/2011
[Code]......
View 5 Replies
View Related
May 30, 2009
I have two systems here running Windows 7. One system is older with a PS2 mouse. I think that is why my monitor will not stay off. I have gone into advanced power settings and turned off sleep, and made sure all my settings look right. I have also gone to device manager and un-checked the "allow this device wake computer" box for the mouse. The monitor still comes on when you touch the mouse. What else could be making the monitor come on? How do I make the mouse so it's less sensitive or disable it so you have to hit the keyboard to turn on the monitor?
View 1 Replies
View Related
Sep 25, 2012
The taskbar always stays on no matter what is open. Its really bugging me. I can't findsetting to make it hide when a program is open. I don't want to use the autohide feature. I windows xp it just let the windows open to max and would hide under what ever program was open.
View 1 Replies
View Related
