MSN Live Disconnects When Accepting Request For Remote Assit
Sep 18, 2011
if i have posted inthe wrong section in apologis, I am using MSN Live 2011 When i get asked for Remote assitance my client always disconnects and then says reconnecting in 59 seconds. The end requesting it gets the pass pages etc but by the time they put it in i have dicsonnected and reconnected by which time the seesion is invalid, I have the correct ports open and also tried all the advice i can see and find online.
View 3 Replies
ADVERTISEMENT
Dec 27, 2011
i have a problem on my PC with Remote Assistance.i work in the end user support so i need to use it alote.the problem is that when ever i use the remote assistance my PC totaly disconnects from the internet!
View 8 Replies
View Related
Apr 3, 2012
Windows XP Remote Desktop Behaviour is desireable. that is, when one account is logged in, if another account is tried to use to log in remotely from another computer, then the 2nd user cannot connect and it is indicated who is currently logged in.
Windows 7 Default behaviour is to allow the second user to try to disconnect the first user through a query message which has an idle timer.
Is there any way to change the behaviour back to windows xp, where 1) disconnection of the 1st user session is not possible, and 2) it is indicated which user is signed on?
View 9 Replies
View Related
May 8, 2011
I am trying to use WLM RA to connect to another W7 PC. Occasionally it works OK but usually when I accept the invite WLM disconnects me and brings up a box telling me it will reconnect in X seconds. If I keeping getting the other PC to send invites it might eventually work but it may take 50+ attempts, sometimes I just give up.
View 3 Replies
View Related
Apr 23, 2012
Whenever I use Live Mesh, it locks the computerand quits Windows Media Center. Is there anyway of setting it so that I can log out with WMC running and the computer unlocked?
View 1 Replies
View Related
Jul 8, 2012
I have two Windows 7 machines which both flawlessly access my Home Server 2011 via Remote Desktop.When I attempt to access the Hone Server via Live Live Mesh "Connect to this Computer" I receive a log in screen request for a Ctrl-Alt-Del. Clicking the Remote Desktop Window link to issue the request has no affect. No other action is available except to disconnect from the server.
View 1 Replies
View Related
May 8, 2012
I have been unable to get Windows to accept a memory upgrade. I want to increase my memory from 4Gig to 8Gig (ie 2 sticks of 2Gig, to 4 sticks of 2 Gig). Windows hangs with all 4 sticks installed, but boots normally with only 3 sticks installed ?
It seems that the BIOS is happy to accept 4 sticks x 2Gig ... but Windows hangs: With all 4 sticks installed The BIOS will boot and the Windows boot screen appears (the four star animation) ... and then the system hangs !
By a process of elimination, I have been able to deduce that none of the individual sticks, or the individual slots are faulty: I can use any combination of 3 sticks in any combination of the four available slots, and it will boot OK and show 12 Gig of memory available.
I have checked that all 4 memory sticks are identical (Corsair Vengeance 1600mhz DDR3), and I have downloaded and installed the latest BIOS ... but the problem persists.
I note that the 2 original memory sticks are labelled V.2.12 and the second pair are labelled V.3.19, but I also note that they are happy running together as long as I only use 3 sticks (any 3 sticks !). The problem only arises when I try to use all 4 !
View 9 Replies
View Related
Feb 25, 2012
When I reformatted my computer I backed up my music onto a separate hard drive, after the format it all got put back onto my computer again but after the move some music files refuse to accept changes to their file details i.e. changes to genre, track title, album artist etc. I have full permissions to modify files and it will allow me to make changes either in WMP or in file properties, but as soon as I set the new details it will snap back to the previous version like I'd never touched them.
View 3 Replies
View Related
Jun 14, 2012
my laptop is not accepting my memory card it says it needs to be format in f that all ready be done
View 1 Replies
View Related
Nov 8, 2011
I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
View 2 Replies
View Related
Nov 7, 2012
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
View 1 Replies
View Related
May 18, 2011
i want to use my printer i installed recently windows 7 but i could not use my printer to print so can u pls send me the printer drive
View 7 Replies
View Related
Sep 28, 2011
how could i install driver for canon lbp2900b in win7
View 1 Replies
View Related
Jun 28, 2012
i need to install canon lbp2900 printer on windows 7 i have the disk
View 2 Replies
View Related
Aug 26, 2012
I am using canon lbp 2900, it does not support windows 2007.
View 1 Replies
View Related
Jul 4, 2012
I have two computers both running Win 7, one in the bedroom and one in the living room and Id like to view files from the bedroom computer in the living room. They are connected via TPlink powerline adapters so a wired connection for both
I can access the living room PC from the bedroom PC via control panel/Network no problem
but when I try accessing the bedroom PC from the living room, I get the error message login failure: unknown username or bad password
I have tried the following:
-creating a new user account for the bedroom PC, and logging in using that account and password
-changing the advanced sharing settings in network and sharing centre to match exactly
Also, I can access when I Turn off password protected sharing but I am not sure of the security of having this setting off so I really want password protected sharing on
View 7 Replies
View Related
Jul 16, 2012
I was using my laptop (HP Pavilion dv6) just fine recently, and through half of yesterday. I did what I normally do when I leave a friends house...I shut it down correctly using the shut down option at the start menu, then pack it into my laptop bag (has a padded sleeve it fits into) and came home. Later that evening I tried to boot it up like normal. For some reason the wireless card takes forever to load and connect, so I typically turn it on and leave it there while I do something else. When I came back the PC said it was locked, which it never usually locks, especially after only 10 minutes. I unlocked the PC and it had my options for monitors (monitor only, expanded, monitor and tv, etc). I selected the PC monitor only and tried to load things like normal. Loaded a few programs and went to send an IM and the keyboard seemed to be stuck on the g or 8 key and wouldn't allow me to stop the input unless I clicked on the desktop. I could not click back in and delete it. Attempts to do so made the screen lock and give me the monitor options again.
At this point I figured it had to be virus/malware related so I tried to reboot into safe mode with networking. I got the options to come up but it was like the up arrow was stuck and wouldn't allow me to manually control and select an option. Had to hard reboot with the power key to try again. This time it would not move at all. I have two pc's and both have tTamviewer so I opened it on both and was able to remote in and do some scans. Spybot found a few things as well as Malwarebytes and I selected remove selected. Rebooted and still having the same issue. Tried scanning using my Avast Internet Security 7 scan and let it run overnight with Malwarebytes again. Malwarebytes brought back a PUP.funmoods (which I have uninstalled in add/remove programs and, while annoying it's showing up, don't believe to be the case because that was uninstalled months ago) and I had a huge list of files in Avast that said they could not be scanned. I have tried using system restore. I do notice when Windows boots up, it shows an empty command prompt box that eventually disappears and then a second one comes up later that says:
"AMD accelerated video transcoding device initialized Copyright (c) 2012 Advanced Micro Devices, Inc. All rights Reserved."
I did recently update my graphics card (ATI Mobility Radeon HD5650) to the latest driver. I have tried rolling back the driver and still no option. I entered the command in the command prompt to run check disk at next boot but it does not run or give an error. It just seems to skip it and go straight to Windows. A friend thought it was simply the input items on my PC giving it issues because the problem wasn't happening through Teamviewer on my Dell PC, however, that started exhibiting similar problems but not on the same scale.
Specs:
Intel Core i7 CPU
q720 @1.60 GHz
8GB RAM
Windows 7 Home Premium 64 Bit
View 1 Replies
View Related
Dec 12, 2012
When I click on the Calculator shortcut, it pops right up on my desktop, but unless I click on the actual calculator, it doesn't accept any of my keystrokes to enter numbers. Is there a way around this?
View 5 Replies
View Related
Aug 30, 2011
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
View 1 Replies
View Related
May 31, 2011
My Windows 7 Home Premium Homegroup is not accepting my settings (stuck on its own settings). I'm able to go to my Homegroup settings and CHECK the boxes for sharing video, pictures, doc.s, and music yet, When I Click save changes, it closes-out the window and when I view Settings once more.. they remain the same as before I changed them (stuck on only "Printers"). This goes for other HomeGroup Settings as well. I'v stopped and started the HomeGroup Services "Listener" and "Provider", but the Strange thing is that it is sharing those files in My HomeGroup.. just not realizing it is.. or sumthin?? Also tried Leaving HomeGroup, Rebooted, and Joined. idk, but more than likely has to do w/ the Home Premium version.. because the Ultimate edition is able to see this Home Premium Laptop as if I had my settings changed to share and stream music, etc.. the Home Premium can't see the Ultimate edition in the HomeGroup
View 1 Replies
View Related
Apr 13, 2012
canon lbp 2900 printer driver not accepting to my windows 7 64 bit i3 configuration
View 2 Replies
View Related
Jul 13, 2012
What do I need to do? I can't get on the internet, use my mouse, or do anything. I used the bcdedit.exe command and the watermark went away, but its still acting like its in test mode.
View 4 Replies
View Related
Dec 7, 2011
I want to check my hard drive for errors, and go through: C/Properties/Tools/ Error Checking/Check Now , etc., but when I do this, I am told that I have to restart my system before it will run. But when I either simply Restart, or Shut Down then restart, the CHKDSK does not run. I am using Windows 7 Home Premium.
View 3 Replies
View Related
Dec 24, 2011
I am using W7, home premium on 1 year old HP desktop computer.Recently, I was having trouble accessing videos from you tube, email and other sites. I had been using adobe flash player 9 and I was told to upgrade adobe flash and to get version 11. I installed version 11 but it would not play until I lowered my privacy settings from medium high to medium per instructions on Adobe. The flash player worked after that except now I am constantly getting the following message everytime I launch IE 9 and every time I go to a web site. The error message is always similar to this -"Privacy Alert The website (AZh).com has requested to save a file on your computer called a cookie. Do you want to allow?Allow or block"I am currently getting this message many times a day. No matter if I select block or allow, they keep coming back. This happens on all sites and often is unrelated to the site I am visiting.
View 3 Replies
View Related
Nov 6, 2011
I'm having trouble with my hard drive, it's a WD elements 320gb hard drive and when I try to put anything on it or take thing off it it give me this message saying it was unable to do it because of an unexpected error "error 0x8007045D: the request could not be performed because of an I/O device error" I have some important files on this hard drive.
View 1 Replies
View Related
Nov 16, 2009
Basically.. I have a orange LED light that blinks like crazy when I'm downloading something.. but what's wierd is.. Once I've finished the download, Sometimes.. It just keeps blinking forever!
That tells me that it's downloading from somewhere and I can't tell from where exactly.. Luckily.. Uninstalling the wireless driver & reinstalling it solves the problem but it tends to come back eventually..
So what I am requesting from you fine people here @ SevenForums is for some type of Internet Bandwidth Monitor which I can use to see where my laptop is downloading from & hopefully stop it completely so that I may use my broadband speed for something more.. For me & less for what I don't want.
View 1 Replies
View Related
Sep 13, 2011
driver for magic mouse for macbook air for windows 7 operating
View 1 Replies
View Related
Oct 4, 2012
i was watching a movie on my laptop, all of sudden my external hard drive stop working. i can not see it.
View 1 Replies
View Related
Sep 4, 2011
I am using FreeAgent Go 5oo GB , when I try safely remove FreeAgent Go always show the error massage " Seagate FreeAgent Go USB device can not be uninstalled right now because the system request system restart " and I have to restart every time.I have already tried the following :
1. Close all application and end recent file process.
2. Check " don't remove file to the recycle bin, remove file immediately when delete" in the recycle bin.
3. Disable write caching on the device in devive property "policy" tab.
4. Using third party sync.exe to flushes disk buffers together with HotSwap!.exe yet still shown the same error massage.
View 3 Replies
View Related
May 24, 2012
I run a web server from my laptop, and my IP address (location) gets updated via DynDNS.org servers.My notebook is always behind a NAT-configured LAN, and I have configured the router firewall to pass port 80 service requests to my IP (usually 192.168.x.2, where x is maybe 0 or 1 or whatever.I use NetSetMan for location based setting).the DHCP server is configured to stay away from static addresses in the private LAN.Most routers have their own port 80 service, the configuration interface, accessible by hosts inside the LAN.I don't have a problem with port 80 service requests coming from the WAN getting passed to 192.168.x.2 host running the web server.BUT, users in the 192.168.x subnet requesting service from within the LAN do NOT get delivered the web page from host 192.168.x.2, but instead the router's configuration interface, if they use the host NAME. Of course, if they use the host IP address, they get the content.What is happening of course is that if anyone uses url..., it goes to DynDNS.org where the IP is resolved to the address a.b.c.d, the WAN IP address of the router I am currently connected to. So the http client bundles the packet to the destination a.b.c.d:80.The users INSIDE the LAN get the router configuration interface web page when they type in a.b.c.d:80, but not users OUTSIDE the LAN (in that WAN).
View 6 Replies
View Related
Jan 30, 2013
I use a windows 7 OS and on january 25, 2013 my computer possibly downloaded a virus or something. I know my way around the computer on an intermediate level but cannot find any strange exe files. I have nortons and it did not stop this download. I think my files are on the computer since 300GB is still being used on my harddrive.
View 1 Replies
View Related
