Passing Port 80 Service Request Through Router From WAN To LAN

May 24, 2012

I run a web server from my laptop, and my IP address (location) gets updated via DynDNS.org servers.My notebook is always behind a NAT-configured LAN, and I have configured the router firewall to pass port 80 service requests to my IP (usually 192.168.x.2, where x is maybe 0 or 1 or whatever.I use NetSetMan for location based setting).the DHCP server is configured to stay away from static addresses in the private LAN.Most routers have their own port 80 service, the configuration interface, accessible by hosts inside the LAN.I don't have a problem with port 80 service requests coming from the WAN getting passed to 192.168.x.2 host running the web server.BUT, users in the 192.168.x subnet requesting service from within the LAN do NOT get delivered the web page from host 192.168.x.2, but instead the router's configuration interface, if they use the host NAME. Of course, if they use the host IP address, they get the content.What is happening of course is that if anyone uses url..., it goes to DynDNS.org where the IP is resolved to the address a.b.c.d, the WAN IP address of the router I am currently connected to. So the http client bundles the packet to the destination a.b.c.d:80.The users INSIDE the LAN get the router configuration interface web page when they type in a.b.c.d:80, but not users OUTSIDE the LAN (in that WAN).

View 6 Replies


ADVERTISEMENT

Installed XP Mode For Windows 7 - Router Ping Request Timed Out

Nov 2, 2011

I have installed windows XP mode for windows 7 and it works fine. I have even installed few apps that were not possible to be installed on win 7. I played with win 7 virtual PC and have few questions:

1. I see that system chosen 120 GB for this virtual Win XP, I was not asked about this and wonder if this could be changed. The originally C: system partition in win 7 is 300 GB.
2. When I use cmd command in run and type ipconfig, I see that correct IP address is displayed (192.168.1.65) since it works in private network and internet is working OK. But when I try to ping router (192.168.1.1) I get message that "request timed out" occurred. Of course, ping works in windows 7, and I have internet access in both win7 and virtual win xp.

View 2 Replies View Related

Service Did Not Respond To Start Or Control Request In A Timely Fashion

Mar 27, 2012

I just started up my Laptop (Sony Vaio 2.6GHz Core i5 | 4GB RAM | ATI Radeon | Windows 7 Home Premium) and none of the programs on my laptop are responding when I click on them to start them. Not even Windows Explorer opens. Nothing responds. I can open the windows start button, but that is about it. The PC is still under warranty, so it's quite new (4months). I also take great care of it, I do not load all sorts of crap on it. Only the essentials.It all started yesterday, when my PC became really slow and I had to restart it, where it literally took 10 minutes too shut down (NO windows updates being installed...). I restarted it, ran a check disc for bad sectors, and it found none. Only a few bad clusters. I also ran - sfc /scannow command in cmd. However, when I open some of the programs(non windows system programs such as explorer and task manager), it gives me the following error: "The service did not respond to the start or control request in a timely fashion".

View 7 Replies View Related

Error 1053: The Service Did Not Respond To The Start Or Control Request In A Timely Fashion

Nov 30, 2012

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 6037 Mb
Graphics Card: Intel(R) HD Graphics 3000, -1988 Mb
Hard Drives: C: Total - 454779 MB, Free - 395876 MB; D: Total - 21855 MB, Free - 2354 MB;
Motherboard: Hewlett-Packard, 1819
Antivirus: Norton Internet Security, Updated and Enabled
Printer HP Photosmart 5514 B111h / Network Status: Ready / Active Connection Type: Wireless

error 1053: The service did not respond to the start or control request in a timley fashion Also before a message / Windows cannot connect to the printer. The local print spooler service is not running. Please restart the spooler or restart the machine. Does this mean to connect a USB cable and reconfigure the wireless connection.

View 3 Replies View Related

No Logon Servers Available To Service The Logon Request

Jun 12, 2012

Every time I try to get administrative access, I type in the password and it says, "There are currently no logon servers available to service the logon request." I'm able to sign in as the administrator, it's just when I need to gain administrative access that this error pops-up.

View 2 Replies View Related

Disabling Router Firewall Instead Of Port Forwarding?

Aug 9, 2011

I have a Linksys WRT160N v2 and i play a lot of games, and enjoy hosting games.however there are too many ports to forward. I was wondering that if i turned off my routers firewall would this eliminate me having to port forward? and if i could do that how would i. I know how to access my router so you can give instructions form that point of if you would like

View 9 Replies View Related

Port Forwarding To Other Computer In A Router Network?

Oct 28, 2011

I am connecting to my office computer from home using remote desktop connection.

My office computer is in a network under router. So I forwarded a port 3389 to my computer's internal ip address. Now I want to connect to another computer at my office from home. I tried forwarding the port 3990. But I was not able to access using remote desktop connect.

What should I do to access the second computer. Will 3390, 3391 ... will not work?

View 7 Replies View Related

Minecraft Port Forwarding Via WiFi Router?

Jul 15, 2012

I need help port forwarding my minecraft server via wifi. I have all permisions to setup but after all the threads and programs I have tried, nothing works. I get exception Failed to Bind to port perhaps another server is already running on this port.

View 1 Replies View Related

Router Port Forwarding To Multiple Computers On A LAN

Apr 21, 2009

Any solution to this problem.

I have for example a few machines up and running on a LAN (might be VM's but that shouldn't be an issue).

Say I have five with addresses 192.168.2.2 ==> 192.168.2.6

I might want to RDP to any of these from behind a router.

Using something like No-IP (No-IP - Dynamic DNS, Static DNS for Your Dynamic IP) I can get a an "Internet acessible" domain so I don't need to know the actual IP address that the Internet sees my router.

As I'm behind a router having Multiple domains won't help either as to the external Internet my router is seen as a single IP address.

However the router will only port forward to a single IP address on my LAN.

So if I need to RDP to any other machine on my LAN other than the default one presumably I could only do this by using a different default port for RDP for each of the machines on the LAN. OK not pretty but "Do-able".

Now we get to the real hassle -- If I did this then I'd need a different version of RDP on the CLIENT computer -- not possible if I'm using a work laptop .

Any solutions . I'm totally flumixed by this one.

View 4 Replies View Related

Hook Up Printer To Dlink Router Usb Port?

Mar 23, 2011

I am trying to connect a Samsung 320 to the usb port of a Dlink router model number DIR-655 extreme

View 1 Replies View Related

Netgear Wireless Router Configuration N150 2-Port

Oct 19, 2012

I need to configure my Wireless Router N150 2-Port NETGEAR. It does not come with a CD and the installation guide has not been successful so far.

View 1 Replies View Related

Windows DNS Service Isn't Responding (LAN Connection With Router)

Dec 13, 2011

I am trying to set up the wireless internet. I am not super tech savvy, however, over the last decade I have been able to research and fix all of my computer problems myself without posting such things. Until now.

I need to set up the wireless router; however, I cannot get the LAN connection to even work with the router.

The error is stating "DNS server is not responding"

View 2 Replies View Related

NOt Passing Welcome Screen Normally Or In Safe Mode

Oct 10, 2011

Not load past the welcome screen. we tried getting in on safe mode, that didn't work, she shut it off, waited, turned it back on, and it did the same thing, except finally after 15 minutes logged her into a temporary profile, without any of her files etc. how does she get back to her own profile to where her files are? and what can we do to troubleshoot this?

View 3 Replies View Related

"There Are Currently No Logon Servers Available To Service The Logon Request"

Jan 29, 2012

We have just been sent a free computer for our office. A Windows 7 HP 32bit.We can login locally i think to a local user KB_SUF/User (where KB_SUF is the name of the computer)however whenever the UAC comes up when installing anything, we cannot proceed because it keeps saying "There are currently no logon servers available to service the logon request" The thing is they sent us the computer without removing it from the domain Now I cant install the programs i need to work and it doesnt seem like theres a local admin on this computer. I tried removing this computer from the domain but it requires going through UAC.Is there any way to make this computer a Local only PC?The company that sent us the computer is in another country and they say they can send someone over in 6 months which is longer than i can wait.

View 1 Replies View Related

What Process Is Using Port 8080 So That Can Open Up Port To Run Software

May 16, 2011

I recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64

View 9 Replies View Related

What Is Better A Wireless Router Or A Wired Router Router

Feb 20, 2013

To view Netflix or Amazon movies which type of router am I better off with?

View 3 Replies View Related

VGA Port And A DVI-D Dual Link Port?

Mar 24, 2012

I just bought a new computer from a computer shop. It is custom built and has the following:Has 8GB RAM, 3.3ghz intel core i5-2500k, windows 7, Intel HD graphics so upto 1.7GB max video memory, 1 VGA slot, 1 DVI slot.Just to confirm I checked in person and my tower has a VGA port and a DVI-D dual link port.

View 3 Replies View Related

Port 01 Ressetting Port Error

Jul 15, 2011

im having the port error of 01.

View 3 Replies View Related

Usb Port And Lan Port Are Not Working Download

Jul 1, 2012

my 2 no usb port and lan port are not working other wise other 1 no usb port working this is new laptop i think driver not installed because when i connect the pendrive there was light showing in my pendrive.so i want drivr

View 2 Replies View Related

When I Start The Computer Up It Says "the User Profile Service Service Failed The Login?

Oct 6, 2011

I have a Dell XPS M1730 with Windows 7 Ultimate and it was doing an iTunes update and the lid got closed during the update process. Now when I start the computer up it says "the user profile service service failed the login, user profile cannot be loaded". The computer starts up in safe mode and won't let me do a system restore because it says it is shut off.When I look at User Profiles in Windows 7, it states that the users profile is as backup and the default profile is the local profile. How can I fix my computer to get my user profile back up and working?

View 1 Replies View Related

System Does Restart After CHKDSK Request?

Dec 7, 2011

I want to check my hard drive for errors, and go through: C/Properties/Tools/ Error Checking/Check Now , etc., but when I do this, I am told that I have to restart my system before it will run. But when I either simply Restart, or Shut Down then restart, the CHKDSK does not run. I am using Windows 7 Home Premium.

View 3 Replies View Related

Constant Request For Allowing Cookies?

Dec 24, 2011

I am using W7, home premium on 1 year old HP desktop computer.Recently, I was having trouble accessing videos from you tube, email and other sites. I had been using adobe flash player 9 and I was told to upgrade adobe flash and to get version 11. I installed version 11 but it would not play until I lowered my privacy settings from medium high to medium per instructions on Adobe. The flash player worked after that except now I am constantly getting the following message everytime I launch IE 9 and every time I go to a web site. The error message is always similar to this -"Privacy Alert The website (AZh).com has requested to save a file on your computer called a cookie. Do you want to allow?Allow or block"I am currently getting this message many times a day. No matter if I select block or allow, they keep coming back. This happens on all sites and often is unrelated to the site I am visiting.

View 3 Replies View Related

Request Could Not Be Performed Because Of I / O Error 0x8007045D

Nov 6, 2011

I'm having trouble with my hard drive, it's a WD elements 320gb hard drive and when I try to put anything on it or take thing off it it give me this message saying it was unable to do it because of an unexpected error "error 0x8007045D: the request could not be performed because of an I/O device error" I have some important files on this hard drive.

View 1 Replies View Related

Request: Internet Bandwidth Monitor

Nov 16, 2009

Basically.. I have a orange LED light that blinks like crazy when I'm downloading something.. but what's wierd is.. Once I've finished the download, Sometimes.. It just keeps blinking forever!

That tells me that it's downloading from somewhere and I can't tell from where exactly.. Luckily.. Uninstalling the wireless driver & reinstalling it solves the problem but it tends to come back eventually..

So what I am requesting from you fine people here @ SevenForums is for some type of Internet Bandwidth Monitor which I can use to see where my laptop is downloading from & hopefully stop it completely so that I may use my broadband speed for something more.. For me & less for what I don't want.

View 1 Replies View Related

Request For Bluetooth Driver For Macbook Air?

Sep 13, 2011

driver for magic mouse for macbook air for windows 7 operating

View 1 Replies View Related

Request Could Not Be Performed Because Of An I/o Device Error?

Oct 4, 2012

i was watching a movie on my laptop, all of sudden my external hard drive stop working. i can not see it.

View 1 Replies View Related

Seagate FreeAgent Request System Restart

Sep 4, 2011

I am using FreeAgent Go 5oo GB , when I try safely remove FreeAgent Go always show the error massage " Seagate FreeAgent Go USB device can not be uninstalled right now because the system request system restart " and I have to restart every time.I have already tried the following :

1. Close all application and end recent file process.

2. Check " don't remove file to the recycle bin, remove file immediately when delete" in the recycle bin.

3. Disable write caching on the device in devive property "policy" tab.

4. Using third party sync.exe to flushes disk buffers together with HotSwap!.exe yet still shown the same error massage.

View 3 Replies View Related

User Profile Service Service Failed Login

Feb 10, 2011

When you boot you get the login screen, click login, then instantly displayed with this message:"User Profile Service service failed the login.User Profile cannot be located."You cannot log into windows normally or in safe mode, I don't use the PC as its someone else's so I don't have any other information as they don't know either they just turned it off and this is what happened when they turned it on.

View 14 Replies View Related

User Profile Service Service Failed Logon

Sep 27, 2012

I've tried going into regedit and changing the RefCount to 0 and restarting but it keeps going back to 2 - it was at 3 originally but keeps reverting to 2 when I restart.

View 1 Replies View Related

The User Profile Service Service Failed The Logon

Sep 22, 2009

When trying to log onto my user account, i get this error.

"The user profile Service service failed the logon.

User profile cannot be loaded" Unfortantly this is the only account i have so i have no way to access my computer.

I am running Windowns 7 Ultimate 32 bit (non beta)

Any help please?

View 1 Replies View Related

Forgot Password For Router Cannot Connect To Router

Dec 30, 2012

I need assistance with my router, serial # CSV01H7A3323 broad band router. I do not remember the password

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved