Installed XP Mode For Windows 7 - Router Ping Request Timed Out
Nov 2, 2011
I have installed windows XP mode for windows 7 and it works fine. I have even installed few apps that were not possible to be installed on win 7. I played with win 7 virtual PC and have few questions:
1. I see that system chosen 120 GB for this virtual Win XP, I was not asked about this and wonder if this could be changed. The originally C: system partition in win 7 is 300 GB.
2. When I use cmd command in run and type ipconfig, I see that correct IP address is displayed (192.168.1.65) since it works in private network and internet is working OK. But when I try to ping router (192.168.1.1) I get message that "request timed out" occurred. Of course, ping works in windows 7, and I have internet access in both win7 and virtual win xp.
View 2 Replies
ADVERTISEMENT
Jul 31, 2012
I have recently installed a network printer and had many problems. I've changed the IP address 3 times to resolve and still cannot. When I do a continuous ping to the printer (approximately 100, I had 4 request time outs). The 4/5 clients using the printer are having problems printing to it.
View 9 Replies
View Related
May 24, 2012
I run a web server from my laptop, and my IP address (location) gets updated via DynDNS.org servers.My notebook is always behind a NAT-configured LAN, and I have configured the router firewall to pass port 80 service requests to my IP (usually 192.168.x.2, where x is maybe 0 or 1 or whatever.I use NetSetMan for location based setting).the DHCP server is configured to stay away from static addresses in the private LAN.Most routers have their own port 80 service, the configuration interface, accessible by hosts inside the LAN.I don't have a problem with port 80 service requests coming from the WAN getting passed to 192.168.x.2 host running the web server.BUT, users in the 192.168.x subnet requesting service from within the LAN do NOT get delivered the web page from host 192.168.x.2, but instead the router's configuration interface, if they use the host NAME. Of course, if they use the host IP address, they get the content.What is happening of course is that if anyone uses url..., it goes to DynDNS.org where the IP is resolved to the address a.b.c.d, the WAN IP address of the router I am currently connected to. So the http client bundles the packet to the destination a.b.c.d:80.The users INSIDE the LAN get the router configuration interface web page when they type in a.b.c.d:80, but not users OUTSIDE the LAN (in that WAN).
View 6 Replies
View Related
Feb 23, 2012
I reinstalled windows 7 home premium on my notebook, and downloaded the NIC & other necessary drivers from the manufacturer's website. I have no other software on the N/B. When I connect the LAN cable I can successfully ping my router, but not www.google.com. I can see the other PC's on the network. The icon on the bottom right shows a yellow triangle and I have no internet access. I have an automatic IP & DNS server set in the IPv4 & v6. I have a desktop PC running Windows 7 on the network that connects to the internet with the router.
I can't understand how a newly formatted PC struggles to connect to the internet (via LAN), when my username & password is already setup on my router.
Details of notebook:
Packard Bell, i5 430M, 4GB RAM, 640GB HDD, ATi Radeon HD5650 VGA, W7HP 64
Windows IP Configuration
Ethernet adapter Local Area Connection:
[Code].....
View 8 Replies
View Related
Jul 9, 2012
Last Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details
Model: Packard Bell Power x-30
Processor i7 870 @2.93GHz
RAM: 8GB
O/S: Windows 7 Home Premium (64-bit)
Modem Router details
Netgear N300 Wireless Dual Band ADSL2+ Modem Router
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly
IP address 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
And therefore forced to set the DNS Server address too
Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
View 2 Replies
View Related
Apr 12, 2012
windows xp mode not working properly. When reinstalling it says "windows xp mode already installed". I cant install the virtual pc associated with XP Mode.
View 1 Replies
View Related
Feb 25, 2011
I recently upgraded my router to a Netgear N600 from a Netgear N150. I have an HP Photosmart Plus B209a-m wireless printer that was working with the N150, but is not found/recognized by the N600. I printed a wireless network test report, and it reads that the Network Name (SSID) Found...............FAIL. I am not certain how to remedy this.
View 6 Replies
View Related
Dec 7, 2010
I've set my router on bridging mode, and now i can't access my router page. My router is a ZyXEL P602HW-D1A.
View 4 Replies
View Related
Aug 24, 2011
I am trying to download ios 4.2 from apple on itunes for my ipod touch. I have really slow internet and I am running on a Toshiba Satellite with Windows 7 Home Premium 64-Bit. The download is 346.8 MB and the estimated time starts at around 9 hours. But even after 5 hours since I start it only says the estimate is 8 hours! Then when it finally gets to 7 a little window pops up and says the network connection timed out.
View 1 Replies
View Related
Oct 30, 2011
I'm having extremely hard time downloading Flash Player. I recently upgraded my Windows from Vista to 7. I went into You Tube and the Flash Player warning came on You need to upgrade your Adobe Flash Player to watch this video." It also said that I have to download Flash Player, which I did. When I am downloading, the Flash Player is first slow in getting the application. When it does it takes about a minute to begin to install. The red bar begins to fill in the bar, then it stops at 12%. It then shows a timeout word. I took this as the Flash Player had a hard time downloading in the time that is requested. I've done something's that I have thought would speed up the download. I have transferred a lot of important files onto my external drive and deleted the files on my C: Drive.
Inspiron 1525 Dell Laptop
Windows: 7 Service Pack: #1
Window Experience Index: 2.9
Processor: Intel (R) Pentium (R) Dual
CPU T2390 @ 1.86GHz 1.87GHz
Installed Memory (RAM): 2.00GB
System Type: 32-bit Operating System
View 8 Replies
View Related
Jul 24, 2012
My problem may be a little different as our city offers free Wifi to its residents. In various locations (like mine) I needed to purchase a Pepwave surf-mini to strengthen the signal and it did up until last week or so. It shows I have a strong signal. What I'm getting now is the spinning Windows circle which turns backwards many times (in gray) before turning green and changing to the right direction. Most times I'm getting timed out or no connection. PS My ethernet is plugged in to the computer, all lights on in Pepwave and I'm running Firefox- just updated to newest non-Beta this morning thinking maybe there was something in it screwing things up.
[Log] .....
View 1 Replies
View Related
Jun 17, 2010
so I have 10,000msecond(2.7hour) shortcut to shutdown my computer ("C:WindowsSystem32shutdown.exe -s -t 10000") which i use for watching films before bed, just encase i sleep half way through but I was wondering if there was a way to make a similar shortcut but instead of making your computer shutdown in a few hours make it sleep in a few hours time. Now I know how to make a sleep shortcut but that makes the computer sleep instantly, and putting "-t 10000" at the end of "C:WindowsSystem32 .exe powrprof.dll,SetSuspendState 0,1,0" doesnt work. Apparently their is a way to do it if you install some software but I don't want that.
View 9 Replies
View Related
Sep 29, 2012
do I have to uninstall the programs in the virtual mach mode first, or do they go away once i delete the virtual windows xp mode and the updates (I saw in your forum how to do this)
View 3 Replies
View Related
Jul 7, 2010
I have tried to download windows updates but it needs to create a restore point 1stAfter sometime it then displays No restore point, Shadow copying has timed out (0x81000101) Try again. I Have tried turning on system restore and turning it off,thi. I have made sure that "Microsoft Software Shadow CopyProvider,Volume Shadow Copy" have been turned onto Automatic
View 4 Replies
View Related
Jul 1, 2011
I tried to install Internet Explorer 9 for testing a website. It prompted me to restart after the install, so I did. It never started back up. Now my computer will not boot into windows except in safe mode and system restore doesn't facilitate at all.
This is my ntbtlog.txt:
[code]Microsoft (R) Windows (R) Version 6.1 (Build 7600)
5 29 2011 02:49:09.125
Loaded driver SystemRootsystem32
toskrnl.exe
Loaded driver SystemRootsystem32hal.dll
Loaded driver SystemRootsystem32kdcom.dll
Loaded driver SystemRootsystem32mcupdate_AuthenticAMD.dll
Loaded driver SystemRootsystem32PSHED.dll
Loaded driver SystemRootsystem32CLFS.SYS
[Log] .....
View 13 Replies
View Related
Dec 5, 2009
I've got Virtual PC/Windows XP installed and working, but when I install a program in Windows XP mode and create a shortcut in the "All Users" folder I don't see it in the Windows 7 start menu, as a matter of fact I don't even have the "Virtual Windows XP Applications" folder in the Win 7 start menu.
View 3 Replies
View Related
Feb 20, 2013
To view Netflix or Amazon movies which type of router am I better off with?
View 3 Replies
View Related
Jul 28, 2011
I have a problem setting up one of my office users with an exchange account. I bought two new laptops with windows 7. Joined them to our domain ok which is one DC windows server2003. Setup two domain accounts for the users and a mailbox exchange account. One of the laptops had no problem setting up a Outlook 2010 account. But the other laptop cannot find my mailserver i get error message "the action cannot be completed.
The connection to Micro exchange is unavailiable etc etc. How can this be if ive just setup the other laptop with an Outlook 2010 account. Also when i ping the server by IP on the problem laptop i get a reply no loss packets. BUT when i ping the server by name(FQDN)
I get a timed out reply. Also if i ping by any FQDN on the laptop in question same time out. The laptop that i sucsessfully setup has no problem pinging FQDN
Tried with firewalls off still no sucsess
I really stumped here as the two laptops are the same setup.
Can anyone point me in the right direction to troubleshoot this issue, as the user is waiting to work with this laptop. Is there a windows 7 setting i need to change for it to work in my 2003 server domain.
View 1 Replies
View Related
May 3, 2011
I have 2 laptops both running widows 7 pro and enterprise and a desktop running windows CP pro service pack 3. I am unable to ping and of course remote to the Windows 7 laptops from the XP desktop. I have enabled RDP in the setting on all PC's
View 2 Replies
View Related
Jan 4, 2012
Ever since I installed Windows 7 on my PC a few months ago I've been getting consistent ping spikes on basically every game I play, but mostly on this one I'm playing most of the time. My ping will be a solid 20-22 for few minutes (often less and more often) when all of a sudden my ping spikes in the hundreds (150-400). Along with this, sometimes my UDP goes red. This never happened with XP, I'll even have the same game server on beside me with XP and I'll never see ping spikes. I've talked to other people who play the game and they experience the same thing, many of them for this very reason have decided to stick with XP for these particular game(s).Another thing that I've noticed since installing 7 is a delay (no better way to describe it, can't say it's lag since it says my ping is 20?). While on my XP PC 20 ping will feel just like that, 20 ping. On the 7, it feels like 50-70 (while saying 20). The game I play is very dependent on fast reaction times so this is obviously very annoying to me.
View 2 Replies
View Related
Apr 23, 2011
I have setup a test LAN with 4 computers, 3 running different versions of Ubuntu and one running Windows 7 Ultimate 32 bit. Until three days ago I did not have a problem pinging between any of the computers. My project is build one of the Ubuntu boxes to be the gateway/router/firewall/VPN server for the LAN. On Thursday I suddenly could not ping the Win 7 box from any of the Ubuntu boxes. The Win 7 box can ping any of the Ubuntu boxes. But what is even worse, I no longer am able to connect via Putty from the Win 7 box to any of the Ubuntu boxes.
I have disconnected the LAN from internet access and turned off the firewall on each of the boxes. I have checked all network settings. I have searched the internet for an answer. All without success. The only clue I have to the cause of the problem is that on Wednesday night Windows 7 performed an automatic update. In my focus on building the gateway/router/firewall/VPN server I failed to do two critical things on the Win 7 box. Turn off automatic updates and create recovery points. How I can correct the ping and Putty problems short of reinstalling Win 7?
View 2 Replies
View Related
Jun 12, 2011
so yesterday at a lan party we decided to upgrade my mates ancient PC to Windows 7 from XP and the computer should have the specs for it and Windows 7 itself was/is running smooth. The first time I put up Windows Home Premium and installed the normal programs. I installed steam and downloaded Counter-Strike, and told my m8 to go play on a local server. And his ping going crazy. My MS is about 10-20 on a local server, but his jumps from 50-200ms, which is unbearable. Well after that we decided to back XP and went off to play, and now it was working perfectly. And the day after we put up a new Windows 7 Ultimate 86x. And again the same problem persists.
View 1 Replies
View Related
Sep 19, 2012
So when I do speedtest and select nearest host, I usually get 3 ping and (average) 75mbps. After installing windows 7, I recently found out that ping result always is 50, and download speed capped to like 55mbps.Also, I pinged a game I play with command prompt, I get about 165ms averagely on XP, and after Windows 7, it went up to 189-192.
View 1 Replies
View Related
Apr 30, 2012
Have read and tried everything here to get my Windows 7 PC to access my XP laptop using its name. Have 3 machines. 1 PC ( ip 192.168.0.102) and 2 XP Laptops (say LXP1 and LXP2), one is ...104 the other, the troublesome one, is ...101. If I ping the machine name: ping LXP2. I get the ping returning with the ip address of the PC (...102). If I try to access LXP2 from Windows 7 PC, in Network in explorer - I am asked for the Password for the share. If I use the ip address 192.168.0.101 in the address bar at the top of explorer ( //192.168.0.101), the shares open and I can access the machine correctly.
Why does ping on the Windows 7 PC return the address of the LXP2 laptop as 102 (the PC's address) but the LXP2 laptop IS correctly configured to have an address of 101 and it open on the PC with this address. This looks to me to be the reason that when trying to open the machine name (LXP2) on the PC in Network in explorer, it fails and askes for a password. The other laptop works perfectly every time. And the 2 laptops can 'see' the shares and access them on the PC. Both laptops can see each others shares and can be accessed. Its 'just' the Windows 7 PC to LXP2 access that appears faulty. I tried disabling 'Network Discovery' and that did briefly work. But this morning - its back to its old self again, will only work when using the ip address...
View 2 Replies
View Related
Dec 7, 2011
I want to check my hard drive for errors, and go through: C/Properties/Tools/ Error Checking/Check Now , etc., but when I do this, I am told that I have to restart my system before it will run. But when I either simply Restart, or Shut Down then restart, the CHKDSK does not run. I am using Windows 7 Home Premium.
View 3 Replies
View Related
Dec 24, 2011
I am using W7, home premium on 1 year old HP desktop computer.Recently, I was having trouble accessing videos from you tube, email and other sites. I had been using adobe flash player 9 and I was told to upgrade adobe flash and to get version 11. I installed version 11 but it would not play until I lowered my privacy settings from medium high to medium per instructions on Adobe. The flash player worked after that except now I am constantly getting the following message everytime I launch IE 9 and every time I go to a web site. The error message is always similar to this -"Privacy Alert The website (AZh).com has requested to save a file on your computer called a cookie. Do you want to allow?Allow or block"I am currently getting this message many times a day. No matter if I select block or allow, they keep coming back. This happens on all sites and often is unrelated to the site I am visiting.
View 3 Replies
View Related
Nov 6, 2011
I'm having trouble with my hard drive, it's a WD elements 320gb hard drive and when I try to put anything on it or take thing off it it give me this message saying it was unable to do it because of an unexpected error "error 0x8007045D: the request could not be performed because of an I/O device error" I have some important files on this hard drive.
View 1 Replies
View Related
Nov 16, 2009
Basically.. I have a orange LED light that blinks like crazy when I'm downloading something.. but what's wierd is.. Once I've finished the download, Sometimes.. It just keeps blinking forever!
That tells me that it's downloading from somewhere and I can't tell from where exactly.. Luckily.. Uninstalling the wireless driver & reinstalling it solves the problem but it tends to come back eventually..
So what I am requesting from you fine people here @ SevenForums is for some type of Internet Bandwidth Monitor which I can use to see where my laptop is downloading from & hopefully stop it completely so that I may use my broadband speed for something more.. For me & less for what I don't want.
View 1 Replies
View Related
Sep 13, 2011
driver for magic mouse for macbook air for windows 7 operating
View 1 Replies
View Related
Oct 4, 2012
i was watching a movie on my laptop, all of sudden my external hard drive stop working. i can not see it.
View 1 Replies
View Related
Sep 4, 2011
I am using FreeAgent Go 5oo GB , when I try safely remove FreeAgent Go always show the error massage " Seagate FreeAgent Go USB device can not be uninstalled right now because the system request system restart " and I have to restart every time.I have already tried the following :
1. Close all application and end recent file process.
2. Check " don't remove file to the recycle bin, remove file immediately when delete" in the recycle bin.
3. Disable write caching on the device in devive property "policy" tab.
4. Using third party sync.exe to flushes disk buffers together with HotSwap!.exe yet still shown the same error massage.
View 3 Replies
View Related
