Well, i did a system rating for my Laptop and here is what i got:
SPECS:
MS Windows 7 Home Premium 64-bit SP1
Intel Core i7-3612QM CPU @ 2.10GHz
12.0GB RAM
Intel HD Graphics 4000
Nvidia GeForce GT 630M
I guess this i why i FPS Lag and Slow load in even a low basic graphics game.
So anyone got any solutions for this? As u can see from my specs, i shouldnt have lagg in a low grphics game.
Was the message i got when i tried to play my freshly installed age of empires II game (with expansion). i have cruised the internet for solutions for my computer, i have re-installed game, done the whole compatibility pack stuff (including disabling themes and 256 colors stuff). i have updated driver and adapter, turned off adapter, changed screen size, done off with aero pointers and what not and i have run as administrator the whole time. i have also updated direct draw and ran dxdiag.exe thing, here it is[CODE]
View 1 Replies View Related[URL] These have continued and recently come to a head when trying to play Assassins Creed 2. It freezes the minute the game loads and I just get white noise from the speakers & have to hard reset the system.I'm not getting any BSOD's - the whole system just hangs.I'm just wondering whether (seeing as the ESTools came back clean) it's my graphics card that is causing the problem (and whether AC2 is triggering it?), but don't know how to check?
View 2 Replies View RelatedI have installed sony vegas pro 11 and been working for some time. Recently I have added ASUS 210Silent ( GE Force Physx HDMI) 1 GB DDR3 Graphics card. All went well for one month. Now, whenever I try to import video clips into vegas pro 11, I am unable to import the clips. The vegas pro hangs up and I get the following message every time."Windows has detected your computer's performance is slow. This could be because there are not enough sourcesto run the windows Aero colour scheme. To improve performance, try changing the color scheme to Windows 7 Basic"Not only vegas pro, but the entire system hangs up including internet.The following is my PC configuration OS Windows 7 Ultimate 32 bits OS Pentium (R) Dual core CPU E 5400 @ 2.70 GHZ Ram 2.00 GB No Pen or Touch input for the display Hard disc Nearly 466 GB System Rating 4.3 Windows Experience Index
View 1 Replies View Relatedi have an aspire 3620, it came with windows xp. i have loaded on windows 7 but i can't find a graphics driver to work on the system
View 2 Replies View RelatedI've installed the latest drivers for each. When I try to play a game I get the error stated in the thread title. I have also tried deleting and reinstalling the drivers. I've looked on several forums for this error message and possible solutions.
View 1 Replies View RelatedThis is my WEI for my graphics card.
Display adapter type NVIDIA GeForce 9300M GS
Total available graphics memory 2303 MB
Dedicated graphics memory 512 MB
Dedicated system memory 0 MB
Shared system memory 1791 MB
Display adapter driver version 8.15.11.9038
Primary monitor resolution 1280x800
DirectX version DirectX 10
Can I change the amount of dedicated system memory?
i hav inspiron 1525 32-bit system...it does not support graphics for windows 7
View 4 Replies View Relatedi've come across Age of Empires 2 and AoC expansion and want to play them, however get a graphics system error."Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"
My specs are:
Dell Inspiron 545
Operating System: Windows 7 Home Premium 64bit,
Processor: Intel(R) Core(TM)2 Quad CPU Q8300 @2.50GHz
Memory: 6.00GB
Graphics Card: ATI Radeon HD 4350
- I've tried to right click the shortcut and change the compatability to XP server pack 2, run as administrator, updated my graphics card drivers and downloaded the latest directX 11 from the Microsoft Website.
Just upgraded from Vista Business 32bit to Win 7 Pro 32 bit AOE working fine before upgrade but now error shown as:"Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"I've checked the drivers are the latest. Directx is ver 11. DirectDraw enabled. Video card is ATI Radeon HD 3650 with latest driver.Tried compatibility modes, disabling Aero, re-install AOE, XP virtual mode. Nothing works.
View 3 Replies View Relatedi have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
View 9 Replies View RelatedI have a desktop with an ATI Radeon 3200 HD integrated graphics,can that be changed or would i have to change the whole box?
View 9 Replies View Relatedi bought a new hp g62 laptop with i5 and ati . i dont know what is the problem with the resolution and the size of the screen..
View 6 Replies View RelatedIn my windows 7 rating i have got 6.3 in gaming graphics but in graphics i have got only 4.9. Why this is happening? A graphics card which is good for gaming is that not good for desktop aero graphics?
View 3 Replies View RelatedHow to switch from onboard graphics to a graphics card
View 2 Replies View Relatedanyone knows how the HD 2500 compares to the 3000 and 4000? I'm mostly looking for improved video transcoding compared to my Pentium G620 and don't really need the "gaming" graphics capabilities. But I haven't been able to find any information as to how the HD 2500 compare.
View 9 Replies View RelatedI've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System:
ASUS P8Z68-V Pro/GEN 3
Intel 2600K
XFX R7950 Black Edition
OCZ 850W
Crucial 128 GB SSD
Seagate Barracuda 1 TB HD
Corsair H100
Windows 7 64 bit (full)
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Suddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
"Missing operating system" massage is coming when i start my system and i am not able to start. I think because , i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 6 Replies View RelatedI have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies View RelatedWould it be possible to download (My Documents) from my XP 32 bit system to a flash drive and load it in my Win.7 64 bit system?
View 3 Replies View RelatedUsing preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedI had the brilliant idea to delete the manufacturer's recovery partition on my ASUS Win 7 64-bit laptop, and reclaim that space for my C drive, and now my system is unbootable. I get the error message "autochk program not found" then stop: c000021a Fatal System Error. I have run System Recovery several times to no avail. I tried to do a repair using the Win 7 DVD, but that didn't work either.
View 9 Replies View RelatedLiving is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View Related"Missing operating system" massage is coming when i start my system. I think because, i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 2 Replies View Relatedwhich graphics need for nfs run my grapics card id 1gb,,should i play game on dat kind of graphica
View 2 Replies View RelatedI want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
I am looking to upgrade my desktop from an xp to 7. System builders are very cheap which concerns me. What is the difference from a system builder and the regular version.
View 4 Replies View RelatedI want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies View RelatedDid a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies View Related