For my graphics card, it says it is an Intel G33/G31 Express Chipset Family. I know it has 64 MB dedicated to it and I'm not sure if I can increase that or if I have to buy a graphics card.
I recently opened a minecraft server, not knowing that online my minecraft would run slower. I'm not 100% sure if its because i only have MB of dedicated video memory, but i'm pretty sure it isIs there anyways i could increase this or get other options on how to help my computer run minecraft
I'm Trying to change the Dedicated graphics memory for my Laptop Since right now its only 256 MB out of the 3067 MB It has. I can't figure out how to change it[CODE]
how i can get my Geforce GT630m to work in my lenovo ideapad Z580 i have tried every conceivable option and have had no success. I have tried the Nvidia control panel, bios and the windows control panel.
There recently I changed my computers graphics card up a slot to increase airflow to do this i unplugged all the power connectors, put everything back together and the computer turned on didnt even get to the bios before it turned off 2 seconds later it turned on again and everything is running fine?
how to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
Alright, I'd like to download and play Skyrim, but the website,"Systemsrequirementslab.com" says my dedicated video RAM is too low to play.I know that the website often tells you that you can't run a game if you have hardware it doesn't recognize, but I checked it out and this time it's right.I checked under the Intel Systems InformationCurrent Graphics Memory (In use): 75mbMaximum Graphics Memory: 1760mb1760mb is well over the recomended amount for the game, so I'm not sure how to let my laptop use it
I downloaded Skyim from steam a while ago and after it had downloaded I was able to load the game up, however the lag was unbearable. It was simply running too slowly.I tried seeking help in various other places, but after looking in detail trying to see what the problem was I finally discovered that my Dedicated Video RAM was the only thing that was too low. It's a mere 64 MB and I need to try and get it to 512mb if I can.I've seen various people say that your dedicated memory can be increased, other have said that it can't be increased though. Which has left me utterly confused.Here are my System details.Manufacture: Samsung Electronics Rating (Windows Experience Index): 3.3 Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz 2.20GHz Installed memory (RAM): 3.00 GB System type: 32-bit operating systemI'll try give any other necessary information if people let me know what they need/how to get it if the problem can be solved. If not then I guess that means I'd have to purchase a new computer?
I want to change my dedicated video memory because in my laptop total available graphic memory is 762MB, but to dedicated video memory just 64 MB and in shared system memory 698MB. like that, maybe I can change the dedicated video memory until 128MB or anything.
have a Dell Inspiron N5110 15R laptop. It is i3, having 4 GB of RAM and 500 GB of hard-disk. But when it comes to the Graphics, it has onboard graphics, i.e. Intel HD Graphics 3000. Now I have 2GB of shared video memory but I only have 64MB of Dedicated Video Memory which is, I think, not enough to play games like Battlefield 3 or Call of Duty(s)Now, coming to the question, is there any way I could increase Dedicated Video Memory? I will be happy to donate 1 GB (or 512 MB) more to Dedicated Video Memory.[CODE]
[URL] These have continued and recently come to a head when trying to play Assassins Creed 2. It freezes the minute the game loads and I just get white noise from the speakers & have to hard reset the system.I'm not getting any BSOD's - the whole system just hangs.I'm just wondering whether (seeing as the ESTools came back clean) it's my graphics card that is causing the problem (and whether AC2 is triggering it?), but don't know how to check?
I have installed sony vegas pro 11 and been working for some time. Recently I have added ASUS 210Silent ( GE Force Physx HDMI) 1 GB DDR3 Graphics card. All went well for one month. Now, whenever I try to import video clips into vegas pro 11, I am unable to import the clips. The vegas pro hangs up and I get the following message every time."Windows has detected your computer's performance is slow. This could be because there are not enough sourcesto run the windows Aero colour scheme. To improve performance, try changing the color scheme to Windows 7 Basic"Not only vegas pro, but the entire system hangs up including internet.The following is my PC configuration OS Windows 7 Ultimate 32 bits OS Pentium (R) Dual core CPU E 5400 @ 2.70 GHZ Ram 2.00 GB No Pen or Touch input for the display Hard disc Nearly 466 GB System Rating 4.3 Windows Experience Index
I have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.
I run a triple screen setup and recently replaced a 1080x720 monitor with a 1080p one (the other monitors are 1080p and 1680x1050). Then I started being plagued by "Windows Aero has exceeded its maximum memory allocated" and "Is your system performing slowly?" messages, with Windows turning off Aero every now and then.I have plenty of memory (8GB, soon to be 16GB) and at idle I only use ~30% of it (when Aero is enabled it sits around 35%), so a lack of memory isnt the issue, just that it seems Aero is using more than is allocated. So I was wondering if there is a way to increase the amount allocated. I have researched a bit on this subject but what I have found so far is a flat out no, Microsoft saying update Windows and graphics card drivers (all is up to date) and some indirect fixes that so far haven't helped.
For the last few weeks I have been getting BSOD: IRQL not less or equal, and system service exception. I first updated all drivers/windows ect, and ran recommended repair utilities. After this had no effect, I had been directed by another source to test the RAM, and so ran memtest, finding no errors. I have also swapped out different combinations of my 4 Dimms of RAM to try and isolate the problem. While I have been swapping out my RAM sticks, I happened to notice that my physical memory usage would slowly and steadily rise until ~ 95-99% at which point the BSOD would occur. Since noticing the RAM usage continually rising seemed to cause the crash, I have found that rebooting when the memory usage gets too high will baseline the RAM usage and can prevent the BSOD. Does anyone have any idea what might be causing this? The only programs I'm using are world of warcraft, chrome, and occasionally skype or MS office. BSOD have occured with some or even none of these applications open(But always with memory usage @ ~ 90% or higher). Closing every program when the memory gets high doesn't cause the memory usage to ever stop rising(though it will temporarily drop the usage). So in a nutshell:My memory usage goes from ~20% on fresh boot, gradually increasing until ~95-98% and I Crash. I've scanned the processes>show processes from all users and nothing stands out that seems to be using too much memory.
i've come across Age of Empires 2 and AoC expansion and want to play them, however get a graphics system error."Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"
My specs are:
Dell Inspiron 545 Operating System: Windows 7 Home Premium 64bit, Processor: Intel(R) Core(TM)2 Quad CPU Q8300 @2.50GHz Memory: 6.00GB Graphics Card: ATI Radeon HD 4350
- I've tried to right click the shortcut and change the compatability to XP server pack 2, run as administrator, updated my graphics card drivers and downloaded the latest directX 11 from the Microsoft Website.
Just upgraded from Vista Business 32bit to Win 7 Pro 32 bit AOE working fine before upgrade but now error shown as:"Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"I've checked the drivers are the latest. Directx is ver 11. DirectDraw enabled. Video card is ATI Radeon HD 3650 with latest driver.Tried compatibility modes, disabling Aero, re-install AOE, XP virtual mode. Nothing works.
i have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
I purchased diablo 3 for my husband & my video card is not supported so he's unable to play, my computer is a HP P624 f-b desktop with a Intel GMA intregrated graphics, I am aware I need to up my power supply also, I have no idea what video card can be used to upgrade so the game is playable, not looking to spend a fortune?
I googled around a bit about my i7 860 and what other kinds of O.C others had succeded with and during some of these reads they mention that they increase PCH to get a stable system and one used as high as 1.25 and only 1.18 vcore to achieve 3.8 ghz I belive it was, while I read other guides and peoples toughts and they never touch PCH or PPL, so im a bit confused so to say. I run these settings now and I ran prime95 for 1 hour and 12 min with 0 error.
