Java 64bit For Windows 7 Shows Installed, But Not Recognized?
Jun 21, 2011
I can't open certain programs, as it says that I don't have the correct java, or its not recognized. I've always had java before, and when I tired to update, it was telling me that it either A. Couldn't do it, or B. It wasn't installed for some kind of error. I've deleted the java, and redownloaded it, and still the same problems. Also, on the automatic updates, its not letting the windows 7 SP1 update either. Maybe has to do with the Java, or vice versa?
Just got a new notebook and Java is installed (64 and 30 versions), but it is not working. I am using IE 9, Windows 7. I checked all settings in IE and they are correct. Web pages using Java do not load properly and I cannot install Mcafee software.
My installs of Windows 7 was working fine and all of a sudden it wont boot anymore. Yesterday I put in a required Java Program update install and I think Windows just added a couple of critical updates as well. I have tried booting in every way possible, rolling back, safe mode, etc, and nothing works.
I keep getting the screen telling me there is a problem and must do a system repair. Then the repairs and all it wants to do is shut down. I managed to pull up some error reports and it seems two files are corrupt which are TCPIP.SYS and one called FWPKCLNT.SYS.
TCPIP.SYS is located in C:/WIndows/System32/Drivers FWPKCLNT.SYS seems to be in drive F:/ which is not an actual drive. It must be a temporary boot drive created by Windows 7.
I have an older XP on another partition on the same hard drive so I booted in XP to see if I could possibly delete the reported corrupt TCPIP.SYS file and replace it from another Windows 7 install from my laptop just to see if that might work. But it wont let me delete the TCPIP.SYS file. It says it is in use, but I can't understand that since I am trying to delete it from the Windows 7 partition while I am booted up from the XP boot partition.
When I try to run an RS private server, (which runs using java), It says this. I have attempted to make a path in my system variables, i named it "Java" and put it as C:Program Files (x86)Javajre6in and it still does not work.
I have a new build with Windows 7 64 bit. I am trying to install Java. I have downloaded it and tried to load it. I get to the installing Java screen and nothing happens.
I'll be installing both Firefox and Chrome in Windows 7 64bit (I use both). Do I have to install BOTH 32 and 64bit versions of Java and Flash to support FF (32 bit browser) and Chrome (64bit), or will installing the 64 bit versions suffice?
She did the annual update and it failed leaving no copy of the program on the machine.Long story short I got her into her Mcafee account and dl'd the updated version. It would not install because of a Java error. This is also the problem preventing with her logging onto her bank account.So I updated her Java to version 7 and confirmed it on Java's site.Still no joy. Mcafee will not install for the same reason and by the way, she is updated to SP1 on Win 7.I'll put a log from TSG SysInfo up a bit later.
I have installed the latest version of Java, and have used the command prompt to verify that I do indeed have Java. I can also play Minecraft, which requires Java. I can not enable Java in Chrome or Firefox even though both of the settings claim that Java Runtime is enabled.
When I try to install java because my browser says it's not installed it says it IS installed. So it asks me if I want to reinstall that's fine too. Then it gives me an error message saying that you can only do that if it's already installed.I can't find folders of it it's not in the add/remove programs list either.
I tried to install java several diffrent ways, but none of them seem to work.
I downloaded and tried to install the 64 bit version offline and online. I downloaded and tried to install the 32 bit version offline and online. Restarted computer multiple times.
Sometimes it says "Java cannot be installed due to your current internet settings" Or sometimes it says "Thank you java has been installed successfully- then when I go to java website I click on "do I have java?" Its always NO
Yeah. I tried basiclly everything, Im about to smash it
Oh. Its an Acer ASPIRE 5534. Win 7 home premium, 64bit.
I'm running 64-bit Windows 7, SP 1 and recently had problems with Windows updates not installing (going back to August).Windows Fixit didn't work, but an HP utility did, which then allowed updates to download and install. However, after the reboot to complete installation, I got the dreaded NTLDR Not Found message. Managed to sort that out (not exactly sure what did it: making sure the boot location was set to internal hard disc and/or using disc one of a three-disc HP Recovery set that I created after a previous NTLDR issue). The problem I have is that one update did not install:
nVidia - Display, Other hardware - NVIDIA GeForce 405 Download size: 188.7 MB nVidia Display, Other hardware software update released in March, 2012.
I've tried to download the driver directly from Nvidia but that fails too, with the message that I don't have an Nvidia GPU!I even lost the Nvidia control panel. I checked the Nvidia components in the appropriate system folder and discovered that they were set for Windows XP. Changing them to WIndows 7 made no difference. I manually ran the Physx application (clutching at straws from a knowledge base of zero) and the control panel loads up but when I run it from the task bar, I get the no Nvidia GPU message. There definitely IS an Nvidia GeForce 405 present. It worked before. At one point, Device Manager showed it as present, but I can't repeat that situation: under Display Adapters it just shows Display.Under Sound, Video and Game Controllers, Device Manager shows 4 Nvidia HD Audio entries, located in Location 0,1,2 and 3 (Internal High Definition Audio Bus). Did they come from the Nvidia GPU set up? And why four of them? How do I get Windows to recognise the GPU and install the new driver? I'm not sure if it's related, but I also can't get Media Centre to find my XBox 360 as an extender. The error message indicates that it might be a Sunbelt Vipre Firewall issue. I've tried to set local port access as firewall exceptions as per the XBox web site suggestions, but I can't work out how to set the 'system' entries (there is no application labelled System to locate). My Packard Bell netbook located the XBox at the first attempt (also 64-bit Windows 7 SP 1, running McAfee-based BT NetProtect Plus). Sunbelt Support were, sadly, no great help, as all they did was direct me to the XBox web site after a very long web chat interaction. HP Support utility also repeatedly failed to install the Ralink WiFi driver update, but it succeeded the other day and then I had problems with not being able to connect the PC to the internet via the wired ethernet connection to my BT HomeHub 3 running Infinity (via the BT Infinity Modem). WiFi connection worked, but not wired. That issue disappeared after a couple of days (no idea why), but every time I start the PC I get a BT Help Browser redirect window attempt to load but it fails every time and I have to end the task manually. Under Netwrok Adapters, Device Manager shows:
802.11n Wireless LAN Card Microsoft Virtual WiFi Miniport Adapter Microsoft Virtual WiFi Miniport Adapter #2 Realtek PCIe FE Family Controller WAN Miniport (IP) Sunbelt Software Firewall NDIS IM Filter Miniport WAN Miniport (Network Monitor) Sunbelt Software Firewall NDIS IM Filter Miniport
However, under the two Sunbelt entries, Device Manager indicates that "Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38) You need to restart your computer before the changes you made to this device will take effect." Closing the entry yields "Your hardware settings have changed. You must restart your computer for these changes to take effect. Do you want to restart your computer now?" You guessed it: restarting makes no difference and the same messages keep appearing under Device Manager.
I am using a dual core Neo Basic 2165 - I just recently upgraded my ram to 4gb 2x - 2gb -ddr2 800 but it just shows 2.75 usable - and only 3gb installed - I've tried every thing so far - still same result - tried the msconfig trick posted her still results after reboot.
i need some help with windows 7 64 bit system showing me only 2.68gb of useable ram.i understand that windows 7 uses like 1gb ram but that still should be 3gb of ram left showing in my system.my graphics card is 1gb but even still its 64bit os and it shouldnt matter sinve over 4gb can be read using 64bit system.
I finally got a wireless card in today but my windows 7 is not recognizing it, even after installing the latest drivers. I have tried both PCI slots on my MB (ASRock 970 Extreme 3) and both lights on the card are lighting up in each one. I even went into the UEFI to make sure PCI slots were enabled.
Ok, I have looked everywhere and tried several "solutions" to get windows to recognize where Java.exe so it can run .jar files.I'm running windows 7 64-bit with java 1.6 32-bit installed. And when I try to install craftbukkit I only get errors.I have copied these errors so you can view them at...So I searched all over google and tried to go to my computer, advanced settings, path and add the path there but i still get the same errors.I've been all over the mine craft and bukkit forums but no one there can explain how to fix it
i am having issues installing java on my pc it will not install i have run registry cleaner and c cleaner also have used the msirepair and allowed in firewall it starts to install gets all the way to the end then says "The wizard was interrupted before Java(TM) 6 update 29 could be completely installed. to complete installation at another time, please run setup again.i went to the java website and it says they are aware of this problem and are trying to repair it figure maybe you could offer a resolution quicker than they could .
I have a Velocity Micro desktop, it came with XP Media Center 32 bit and has a Core 2 Duo processor and 4 GB of ram, I've been wanting to try 7 for a long time so I bought a new 1TB WD black hard drive and a OEM copy of Win 7 home premium, I removed the old hard drive, installed new drive and proceeded to install Win 7, everything went fine on the install but I can't get it to connect to the internet, it reports error 651 "The modem has reported an error" and then a box pops up that looks like an old dial up connection box with a spot for a name and password and says redial in 45 sec. I'm not on dial up but am on DSL with a new Netgear N router, this computer was connecting fine just before I did the install, if I check Device manager it says the network card is working properly, and I can unhook the network cable from this computer and plug it into an old laptop with no wireless and it connects with the cable and gets 5Mbps speed so nothing is wrong with the cable
The above two will not be on the same drive. One drive will be a hybrid and the other a ssd. Each will be mounted on an internal sata mobile rack using their own individual tray: one tray will have to be removed before the other one can be inserted and not "hot" swaped.
I just installed windows last night without any software on it but all the drives it takes about 30 seconds from putting in my password. I have nothing what so ever running in startup so I'm a bit confused. I'm using Crucial brand new SSD and 16gigs of G.Skill ram and both are working fine. I didn't update windows.
I installed a new motherboard an asus p8p67 with a intel i3 and upgraded to windows 7 64bit. Everything went fine the first day, but next day everything kept telling me to install flash player which I already did that along with java. I went to control panel flash player was there hit update, says I had latest version. I uninstalled flash player went to adobe and downloaded it again, install process says I have the newest version already installed but I have no flash installed at this moment. The little bar at bottom keeps saying website wants to install following adobe flash player addon which is showing right now as I write this. I installed it at first with the default 32 bit internet explorer which is ie9 but now nothing seems to work and still have no flash player installed.
I got windows 7 ultimate 32bit free from my school, and decided that I wanted to clean install, and not upgrade it. I transferred all my files off, booted the laptop up with the windows 7 disk, and proceeded to clean install. I didn't have the drivers cd for my laptop, but I just wiped my drive and installed 7 anyway. Now I have windows 7 ultimate 32bit, and can only use 3 of my 4 gigabytes of memory.. The thing I don't really understand is the whole upgrading option, and like, I know that it's a windows 7 32bit dvd, but it doesn't seem right to go from 64bit to 32bit. So is there anyway I can make it 64bit without having to buy a new dvd? And if not, how much am I missing out on, with not having 64bit, especially with having 4 gigabytes of ram?
When I enable my Nvidia geforce 9600 gso I cant get passed Windows 7 logo my screen goes blank very frustrating. I tried everything downloaded the new 191 drivers in safe mode uninstalled re installed etc then rebooted in regular mode and nothing. Please help. Is anyone else experiencing this too.
So now I have to disable nvidia graphics card in order to get into desktop and use the internet. This is where I am.
Everything worked on vista 32bit and I did a custom install with Windows 7 64bit. I also used Windows 7 compatability manager everything was ok, but had to do custom install.
