I am trying to reinstall XP (I dont think OS matters) on my computer, but I dont have my disk with me. no one else seems to have it either. fortunately, I had copied my disk onto my hard drive a long time ago, and have an empty flash drive, so I copied the files onto the flash drive and tried to get it to run for me. My computer said boot error. How do I get it running? I really need to wipe my computer.
View 9 RepliesI cannot due to the fact I cannot access anything except the f8, f10/alt, f2 and f12 screens which no matter which selection I attempt I end up back to this dreadful blue screen and errror message. I am posting from a nearby desktop computer with hopes you will be able to guide me in using either my Windows operating system reinstallation disc, or a boot/repair disc I have with restore tools included.I have changed the boot order a few different ways, with no luck. I have tried windows debugging and every other option in the f8 menu, with no luck. I have tried the f12 selections, with no luck.As I've learned, the PC is a Gateway NV59C with 4GB DDR3Mem, 320 GB HHD, Intel HD graphics, Intel Core i3-330MHD with Windows 7 and 64bit.
View 9 Replies View RelatedI am trying to create a disc that will automatically install and activate Windows 7 Professional. Included in the installation disk will be several ninite installers that will install the latest versions of programs needed for my department. After windows 7 installs and activates, when the user logs onto the computer he/she needs to be prompted with options to install either Essential List of Programs Suggested List of Programs Complete List of Programs Choosing any of the three options will run Ninite Installer associated with the option. For now the prompt will be implemented as a simple VBScript. I've managed to get the unattended activation and installation step working, but I'm stuck on the prompting step. Does anyone know any way to configure the installation CD to run a script as soon as the user logs onto the computer? In case you're wondering, I'm using VLite to help create the installation CD.
View 1 Replies View RelatedCan someone hit me with a link for manually installing the AHCI driver and switching the OS mode for the storage controller.
If I remember right, this is just putting the driver in /sys/drivers, running a script, and making a registry change. Then you reboot, change the motherboard setting, and then install IMSM after the OS comes back up. I don't remember the script, or if it was just a reg edit, etc.
tell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
View 5 Replies View RelatedComputer posts, then checks hard disk RAID status (Healthy), then a white blinking cursor appears on upper left corner on black screen, and hangs there forever, UNLESS i put in a Windows bootable CD, then based on my boot priority order (CD ROM, HD) it reads the CD, then it displays "Press any key to boot from CD or DVD...", for which i don't press anything, and the computer proceeds to boot Win 7 OS correctly. So basically it doesn't boot unless i just have a bootable CD in tray.
View 3 Replies View RelatedThe problem is minor and it's just a bit of an annoyance I've been dealing with from time to time.[CODE]Basically, If I were to I put my computer to sleep(using the sleep function, not hibernate) and try to wake it up within a few seconds, the computer would go into an automatic reboot loop that would continue to boot, shut down, boot, shut down until I turn off the PSU completely. I'm trying to figure out which component might be causing this problem, if any. I've updated my bios, drivers, and ran memtest but nothing seemed out of the ordinary and it didn't fix the problem.
View 2 Replies View RelatedI've done a search for issue and found none. I have a 2 Terabyte Seagate USB drive.When I try to boot with this USB drive connected to computer the POST hangs. Once I remove the USB drive the system boots as normal. My system also has a USB RF Transceiver for the keyboard and mouse. It causes no problem though just the drive.
View 9 Replies View RelatedI have what may be an unusual question. How do I post a plain text-only page up on the internet? An example of what I want is url...There's no html on this page. Only plain text.I tried to do this on Google Sites using the "Add Files" feature, but when I go to the link it goes right to a "download file" dialog box which is not what I want. url...
View 3 Replies View RelatedSeems to be Deadand now other other HP desktop (with the identical motherboard) is now failing as well. This one is a pc6000, and all I ever get is the screen that displayes the BIOS, processor, CPU speed and the 4 memory banks. So far, so good.Then it says Initializing USB controllers.DoneThen several blank lines before it says Press <F10> to enter SetupThen nothing... although sometimes after the 'Done' line it says 1st Drive: None2nd Drive: None3rd Drive: None4th Drive: None00 USB mass storage devices found and configuredbefire going to a new screen where it sayseboot and Select proper Boot device or Insert Boot media in selected Boot device and press a keyPressing any key just redisplays the msg.What could possible be going on with these 2 nearly identical HP desktops with the same mobo?
View 9 Replies View RelatedI had no problems with the first two computers that I upgraded from Vista to Windows 7, both were 64bit systems. I'm having post upgrade problems from vista to windows 7 with my 32 bit machine (Sony Vaio VGN-NR430E). THe machine did fine with the compability check for Windows 7.
Problems:
1) Some icons on the desktop are not appearing. Instead of the icon, I just have a white icon in it's place.
2) Taskbar icons are either white or blank. If I click on the white or blank icon the application will run, If I hover over the blank or white icon it tells me what application it is.
3) Control panel icons are not present.
4) Start menu icons and folders are white. If I click on them, it just hangs like it is trying to do something and will remain like that until explorer crashes.
Ideas that I tried but did not work:
1) Tried rerunning the Windows 7 upgrade. But when it gets to the compability check, the check just keeps running. eventually I then must cancel out of the upgrade
2) Tried a chkdsk at bootup. No errors, but it did not fix my problem.
3) Tried rebuilding the iconcache. Did not work
4) Tried some other type of scan (sfc /scannow)that was started from the command prompt. it did not work.
Usually POST screen would show up first with a laptop company logo, but now Windows 7 startup appears first instead. Then, the Windows 7 startup screen freezes immediately. What's the problem? Motherboard or corrupted BIOS?
View 9 Replies View RelatedI found this document to be quite interesting:Install Windows 7 FAST without a DVD or USB device[2]=General Tips..Now when you get a computer from Dell, HP, ect. they have prepared a factor key combination to acess the recovery partition to start it up.Is there a way to make your own key combination during post? For instance, what if you make the perfect image...having it on a disk partiton is so much faster than a usb disk or even a dvd.
View 2 Replies View RelatedI installed Virtual xp by folling all steps in the document [URL]however, in 7th step i.e. open and run windows xp mode..when i click on start-> program -> windows virtual pc i am not getting sub menu consisting windows virtual pc and windows xp mode.instead i m getting explor window showing desktop.ini file.
View 1 Replies View RelatedFirst off, I just migrated over to Windows 7 Forums from Vistax64 and am excited.
I'm currently running Vista Home Premium 64-Bit on a Pentium i7 with 6gigs of Ram and a pretty hardcore video card. Plus, the computer is only 4 months old and i am a pretty tidy user with very little on the drive.
SO: I've elected to upgrade instead of clean install. Now, I'm not looking for any responses explaining to me why I'm an idiot for upgrading instead of doing a clean install because I'm not. I am aware of the drawbacks and I'm ok with them, though they form the backdrop to my question in this post.
There have been a lot of posts about why you should go for a clean install. I hope this post about upgrading gets some intelligent attention, too.
Here's my question: what steps can I (and other upgrading users) take post-upgrade to minimize the "dust" from my (our) old vista OS? For example, a good registry cleaning seems like a good place to start. But what else?
On my laptop i have a limited amount of HD space i currently have 37 gb free of a 160 gb drive. After i upgrade to Windows 7 is there any way i can delete my old vista files? and if so where would they be located and is it safe to delete them?
View 3 Replies View RelatedFor starters this is not my computer, I'm attempting to fix a friend of mines laptop. I have no idea what he was doing prior to this meltdown but the computer will no longer boot so far as to get to the windows login screen. I have tried booting in safe mode on all different settings but after the bios readout it just goes to a black screen with the pointer (same as reg boot).
View 8 Replies View RelatedI have on my laptop (a thinkpad, from Lenovo) Windows 7 Professional, obtained via something called "MSDN Alliance" and my university. A few weeks ago, I finally had the opportunity to upgrade my hard drive. Thus, I placed the new disk in a USB case, plugged it in via USB, and performed a disk clone via a software from a company called EASUS. I then removed the old disk, placed the new one in its location (that is, inside the laptop), and removed the USB equipment. Good as new, I though. And everything appears to be working fine -- except the "nag screen" that seemingly randomly pops up out of nowhere and tells me that I am using a (I don't recall the text exactly at this moment) less that legal/legitimate installation of Windows. I can check if Windows has been activated -- and it has (of course, I did this after having installed it) (i.e., on the "old" disk), I have tried searching for solutions, however I only find issues when similar clonings have changed the drive letters.
View 9 Replies View RelatedI recently attempted an install of Windows 7 onto a friends PC. The specs are listed below. Here is a link to a screenshot of the problem www.ronnarozny.com.
This occurs after a Windows 7 install. The system boots to the Windows 7 setup, where personal options are selected. After this, a reboot will begin the POST, and prior to completion, this screen appears. I do not believe the POST has finished, and I do not think it is handing boot duties to the OS.
What I have attempted so far is:
Memtest - checked out ok.
Replaced CORSAIR mem with other sticks.
Reformat from command prompt on boot disk.
Removal of all hardware, including video card.
I am completely stumped on this issue, and any help would be appreciated.
Intel 82801GH I/O Controller Hub (ICH7DH) SATA Controller in IDE mode. Windows 7, SP1, Home Premium, 32 bit. Plextor DVDR PX-L890A ATA Device. HD and CD-ROM both connected to black connectors on Intel D975XBX2 MoBo. BIOS set on default. With CD-ROM connected POST proceeds normally until it gets to "EB" test where it hangs for 2 minutes then proceeds to integrate with the OS. When integration complete, the CD-ROM and OS operate normally. If I disconnect the CD-ROM from the black connector, POST and integration proceed normally and rapidly.
View 1 Replies View Relatedtopic says it all. i have corsair tx650w. and I don't know if the psu causes this phenomena
View 9 Replies View RelatedAfter removing a virus with malwarebytes the next day the computer (Dell studio xps running Windows 7 64 bit 8Gb) will post but then goes to black screen with blinking cursor and continuous beep. Removed and reset memory, CMOS battery, etc. BIOS sees the SATA drive. Booted from Win 7 disk - recognized the hd but disk repair did not work - was able to restore to a restore point, but after reboot, same thing. Finally took out hard drive and placed in another Dell computer to see if it was the drive or something else - it's the hard drive - computer sees it, but after post goes to black screen. Attached to my Mac and was able to back up files, but would really like to be able to repair windows to keep programs
View 2 Replies View Relatedi changed a Bios setting on my Toshiba Satellite Pro L640 now my laptop won't post and keep going to the internal recovery utility?.
View 4 Replies View RelatedWhen the the computer turns do not see the POST process and the windows loading processOnly when the system up then seeing the Desktop After a short time.A similar process happens when doing Switch User while the screens have a black screen until it shows in this process.
View 2 Replies View RelatedI need a driver for a HP 2430tn with postscript. The update that they did in June does not let me print in post script.
View 1 Replies View RelatedWhen I start up my pc I my screen stops at the POST screen where down to the bottom it says AHCI Port 0 error...I never had that error before as normally I won't even see the POST screen.
View 14 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5400 @ 2.70GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4095 Mb
Graphics Card: NVIDIA GeForce 8400GS, 512 Mb
Hard Drives: C: Total - 948766 MB, Free - 881032 MB;
Motherboard: ECS, G41T-M6
Antivirus: avast! Antivirus, Updated and Enabled
Hello folks I am an 84 year old lady & am hoping 1 of you bright young things can help me get back on track.I used to be able to go to my explorer find a page copy the link & then paste it onto my dasktop if it were 1 that I would use often. I seem to have lost my ability to do this.
Ive had this computer for about 5 years and recently it has started to boot up really slowly
It goes through post like normal and then hangs on a black screen with a blinking cursor in the top left for up to 3 mins (maybe more, i didnt actually time it) before the windows 7 splash screen comes up I rarely re-start my computer, but now when i do im always afraid that it wont start up with how long it sits at that screen
The stuff ive found in searching about it has been about computers that dont boot at all when they have this screen, so im worried that will happen to me Ive also found that it might be the MBR being damaged, but in all those cases the people with that problem have more than 1 OS installed, i only have 1 installed
I would just do the steps to repair the MBR but i want to make sure there isnt another/better solution before i do
The computer runs fine other than this problem I've never formatted it (i know i probably should after 5 years but i dont want to) I didnt know where to post this sort of thing, debugging seemed like the best choice
My computer was working fine 15 hours ago, playing games and loading webpages and all that. I turned it off for the night and when I turned it back on this morning it booted properly, as per usual. So then I logged in, the screen turned black, my cursor appeared and nothing else happened. I've been trying to fix this problem all day and if I leave it for long enough it does log in properly, but I was wondering if maybe one of the start-up systems isn't working right or whether I just need to do a disc cleanup. Running Windows 7 Home Premium 32bit, and the average wait time for it to load (when it does load, which is occasional) is about half an hour. Also running Windows 7 on a Mac, because my school gave it to me for phr33 at the end of their Mac phase.
View 1 Replies View RelatedI recently built a new gaming computer. It runs everything smoothly, but there is one glaring problem that I cannot seem to shake. My computer will at unpredictable times halt everything (freeze) for 1-3 seconds and then resume. During this time, all sound seems to be directed to a different audio port. It seemed to start with my audio. I would plug in speakers, and then I would plug in a 3.5mm headset and it would intermittently (and rapidly) detect the headset. Looking at my realtek audio software, the input that the headset was plugged into would rapidly turn on and off. Plugged speakers into that port and it worked with no problems. The headset is not to blame because I used it with no problem on my laptop. I then suspected it was a problem since I was doing dual audio output. I downloaded the newest drivers from the ASUS site for the realtek audio manager. My computer would still do the intermittent freezing. I have read some suggestions that it may be my memory configuration. I am a programmer and not a hardware specialist, so I am unfamiliar with how a memory configuration works and how to correct this problem. I downloaded a memory qvl update from the ASUS site, and it only seemed to bring up a console window for a split second before fading out.
[URL]
I have built my computer about 2 months ago now, and had nothing but issues with it, display drivers stopped responding, alot of BSOD (bccode 1a and 50), black screens, lockups and so forth, i have FINALLY read enough forums over this 2 month period to solve majority of problems accept one, Computer runs fine, but every morning on cold bootup it'll start to load POST and then go to a black screen and just stay there unless i reboot the computer and then it'll bootup fine. I will turn off the computer after that and go to work for about 8-10hours come home and turn it on all fine, untill the next day. I have tried new ram, fail safe settings in bios, updated bios to the lastest, bought a new power supply, tried reconnecting everything, unpluged storage harddrive. Only thing i could think of causing the problem is my video card drivers, because as soon as i install the drivers i get "drivers have stopped responding but have recovered" screen would lock up freeze/artifacts and then come back, until i changed my idle clocked from 157/300 to 400/900 and it sorted out that problem, but those settings dont kick in until i reach into desktop, could it be trying to load the ati drivers during post and black screening?
View 5 Replies View Related