AHCI Port 0 Error On Post Screen
Jun 26, 2012When I start up my pc I my screen stops at the POST screen where down to the bottom it says AHCI Port 0 error...I never had that error before as normally I won't even see the POST screen.
View 14 Replies
ADVERTISEMENT
AHCI Port 0 Device Error Windows 7 64bit
Jun 9, 2011AHCI Port Error 0 Press F2 to continue. This error shows on my Gateway zx4800 but when I press F2 nothing happens. S.M.A.R.T capable and status BAD.....it also show this above the AHCI error. My hdd works with other PC.
View 2 Replies View RelatedChange Storage Controller To AHCI Mode Post Install (windows 7 64-Ultimate)
Sep 19, 2011Can someone hit me with a link for manually installing the AHCI driver and switching the OS mode for the storage controller.
If I remember right, this is just putting the driver in /sys/drivers, running a script, and making a registry change. Then you reboot, change the motherboard setting, and then install IMSM after the OS comes back up. I don't remember the script, or if it was just a reg edit, etc.
Intel Sata Controler ICH10R AHCI + Jmicron AHCI Error
Jul 16, 2009I have the GA-EX58-Extreme Board and have just installed the pre release of Windows 7 7600 64 bit. Normally i have experience to get the BSOD when in staling with AHCI active in bios so i change to IDE mode. Installation went flawless and also the change to AHCI mode on Intel ICH10R controler went normal.
As always i got problem to change the J micron controller to AHCI and of cause i got the BSOD again. I installed the latest R1.17.48.16 driver and tryed again but no luck. Can some tell me what i am doing wrong. ? I have a hardisk and a dvd drive attached to the J micron Sata connection.
Cannot Find Intel 5 Series 4 Port SATA AHCI Controller Drivers For Windows 7
Oct 1, 2011I'm attempting to install a retail copy of Windows 7 Ultimate 64-Bit (VPCEB15FM) or "PCG-71312L" on this laptop. However, this message appears: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now." The problem is that I cannot find the Intel 5 Series 4 Port SATA AHCI Controller drivers for Windows 7 64-Bit to put on a floppy or USB drive. I've combed the Sony website and Google and the only Intel 5 Series 4 Port SATA AHCI Controller Drivers that can be placed on a floppy or USB are for Windows XP. Without the TXTSETUP.OEM, I'm dead in the water! The 64-Bit drivers (INDOTH-00215023-0042.EXE) are for an already installed Windows 7. BTW guys, the the BIOS settings on this laptop is as anemic as it gets, so there is really no way to optimize there..
View 6 Replies View RelatedBlack Screen BEFORE Post Screen On Restart?
Dec 22, 2012Just purchased 2 new (refurb) PC's for my wife and I. It's all I could find with Windows 7 still available. They are both HP Pavilion p7-1233w 64 bit Desktops running Win 7 Home Premium SP1.During Windows setup of PC #1, it asked for a restart. When the PC powered back up, it had a black screen from the start (before the Post screen). I power cycled it several times with no luck. Even switched monitors and video cables. The next morning it started normally with perfect video.I assumed the Refurb PC had a problem and set it aside for return.Been setting up PC #2 for a few days now with lots of restarts. All was well, until I did a restart just now. There was the identical problem. Power cycled the unit twice, and still had the black screen.Then I unplugged the PC, and pressed the power button to discharge the capacitors (fans ran for a few seconds). When I returned power and started the PC again, it functioned normally. I've done 10 quick restarts since to try and replicate the problem, but it only happened that once.
I love these PC's, and I love Win 7, so I hate to give them up. But I don't want the video freezing up on me every time I do a restart. I assume now, that PC #1 is not necessarily defective.Since this is occurring before the post screen, I wasn't sure if it could be windows related.
No Post And Startup Screen
Feb 10, 2013Usually POST screen would show up first with a laptop company logo, but now Windows 7 startup appears first instead. Then, the Windows 7 startup screen freezes immediately. What's the problem? Motherboard or corrupted BIOS?
View 9 Replies View RelatedPort 01 Ressetting Port Error
Jul 15, 2011im having the port error of 01.
View 3 Replies View RelatedPOST But No Login / Black Screen
Sep 8, 2011For starters this is not my computer, I'm attempting to fix a friend of mines laptop. I have no idea what he was doing prior to this meltdown but the computer will no longer boot so far as to get to the windows login screen. I have tried booting in safe mode on all different settings but after the bios readout it just goes to a black screen with the pointer (same as reg boot).
View 8 Replies View RelatedGarbled Screen - ASCII - DURING POST
Nov 12, 2009I recently attempted an install of Windows 7 onto a friends PC. The specs are listed below. Here is a link to a screenshot of the problem www.ronnarozny.com.
This occurs after a Windows 7 install. The system boots to the Windows 7 setup, where personal options are selected. After this, a reboot will begin the POST, and prior to completion, this screen appears. I do not believe the POST has finished, and I do not think it is handing boot duties to the OS.
What I have attempted so far is:
Memtest - checked out ok.
Replaced CORSAIR mem with other sticks.
Reformat from command prompt on boot disk.
Removal of all hardware, including video card.
I am completely stumped on this issue, and any help would be appreciated.
Windows 7 Crashing Post Login Screen
Jun 30, 2012My computer was working fine 15 hours ago, playing games and loading webpages and all that. I turned it off for the night and when I turned it back on this morning it booted properly, as per usual. So then I logged in, the screen turned black, my cursor appeared and nothing else happened. I've been trying to fix this problem all day and if I leave it for long enough it does log in properly, but I was wondering if maybe one of the start-up systems isn't working right or whether I just need to do a disc cleanup. Running Windows 7 Home Premium 32bit, and the average wait time for it to load (when it does load, which is occasional) is about half an hour. Also running Windows 7 on a Mac, because my school gave it to me for phr33 at the end of their Mac phase.
View 1 Replies View RelatedBlack Screen During Post On Cold Bootup
Oct 12, 2010I have built my computer about 2 months ago now, and had nothing but issues with it, display drivers stopped responding, alot of BSOD (bccode 1a and 50), black screens, lockups and so forth, i have FINALLY read enough forums over this 2 month period to solve majority of problems accept one, Computer runs fine, but every morning on cold bootup it'll start to load POST and then go to a black screen and just stay there unless i reboot the computer and then it'll bootup fine. I will turn off the computer after that and go to work for about 8-10hours come home and turn it on all fine, untill the next day. I have tried new ram, fail safe settings in bios, updated bios to the lastest, bought a new power supply, tried reconnecting everything, unpluged storage harddrive. Only thing i could think of causing the problem is my video card drivers, because as soon as i install the drivers i get "drivers have stopped responding but have recovered" screen would lock up freeze/artifacts and then come back, until i changed my idle clocked from 157/300 to 400/900 and it sorted out that problem, but those settings dont kick in until i reach into desktop, could it be trying to load the ati drivers during post and black screening?
View 5 Replies View RelatedSlow Downs Then Black Screen After Post?
Jul 10, 2010It started yesterday when my wife and I noticed the computer hanging a bit more than normal - even when doing basic things, like clicking "login" to check our email. But, it would always come back and really wasn't all that frequent. This morning I tried to start it up and it got stuck on a black screen after the motherboard POST image. I was able to get into BIOS and boot from the windows CD. A system restore fixed it. I'm just wondering what you guys think was likely to have caused it. Is it likely that my boot files got corrupted somehow? I ran a diagnostic and from Seagate and it says that my hard drive is fine - but I'm not sure if that's just because I recently restored Windows.I did recently install a big name game - but it ran fine for three days before this happened. The system restore point I had was from when I installed it, so it's now gone.What do you guys think could have caused it? I'm just a little concerned that restoring only patched over a problem that will crop up again - or, that I should be afraid to install that game again.PS: System Specs: Windows 7 Home Premium 64-bit, 3.0GHz E8400 Intel CPU, 500GB Seagate SATA HDD, 4GB Crucial 800MHz RAM (x2 2GB), ASUS P5Q Pro Turbo LGA 775 Intel P45 ATX Intel Motherboard. The game that was installed was Vanguard: Saga of Heroes.
View 3 Replies View RelatedPainfully Long Delay Before POST Screen
Oct 23, 2012[code] I have Windows 7 64 bit in HDD1 and OS X Lion in HDD 2 that I installed using Hackintosh distro. I press F8 key on POST screen which gives boot drive selection menu from where I select the HDD to boot from.The system was running flawless on both operating systems until recently. The problems are listed below:
- Almost always it takes unusually long for POST screen to appear (around 60 to 90 seconds) whereas during good condition it used to appear within 5 to 10 seconds of power on
- Sometimes the system doesn't receive display signal
- If I take out power cables from all SATA drives but one, then the POST screen usually appears normally for sometime.
- At one time I removed ALL SATA drives, i.e. both HDDs and DVD then turned on, it turned on promptly without delay.
Then I connected Optical drive and turned on, it turned on properly. Then connected the HDDs one by one, and it still turned on without delay. But this lasted only for 2 days after which the same problem, i.e, either POST screen appears after painfully long time or doesn't appear at all.Before this motherboard, I had Intel DG43NB and had both Os X and Win 7 and experienced exactly the same problem and my hardware guy told me that my motherboard had gone down so I replaced with this ASUS one. Again the same problem with this board
- Where is the problem?
- Could the problem possibly be in the motherboard? I think it's unlikely because once the system starts it works flawlessly, i.e. no errors, no crashes, nothing.
- Could it be the power supply? Since it seems to work better with less load, i.e. some drives disconnected.
- Could it be the GPU?
- What's the best way to diagnose?
- Does the problem have anything to do with my frequently switching boot drive from POST startup menu?
Blank Screen After Windows POST No AGP440.SYS
Dec 13, 2009I was on my Compaq V2310US laptop and noticed it was running slow, so I decided to run chkdsk just for the heck of it. It appeared to freeze at around 33%(but now I dont think it did), so I turned it off. I restarted it, noticed that it just stayed at 33% for awhile and left it this time. Now when I start windows 7 ultimate, it says "starting windows" then boots to a blank screen. No welcome screen or anything.
The mouse pointer is there and my wlan button and capslock work, but the mute sound button doesnt respond. If I boot in safe mode, CLASSPNP.SYS is the last file to load and I get the same black screen problem. Im wondering why theres no AGP440.SYS.
I have the ATI M200 chipset and when I updated it awhile back, my PC did the same thing, however I was able to go into safemode and uninstall it. I got another option to update it a week later(which made windows aero work) saying the driver was for windows 7 and it worked. My advanced options are limited to the 3 safe modes and normal mode. Startup repair didnt do anything.
AHCI Port0 Device Error
Aug 8, 2011When i turn my laptop on it comes up with: AHCI port0 device error. At the moment i am trying to re install windows 7 but it (after changing the BIOS) it gets to a screen where it states that it is starting?
View 2 Replies View RelatedSB600 ATI RAID AHCI Drivers? (BSOD On Boot If In RAID/AHCI Mode.)
Jan 6, 2009anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
Error 633 Open Port
Nov 19, 2009When i dial up, i get some Error Message 633 message about COM port being used by other application or modem not configured properly.
In device manager the modem seems OK, and i dont know of any other device using a COM port. I've tried different drivers, swapping the modem around inside the case but no joy and i'm getting really annoyed now.
Windows 7 Blank Screen After Windows POST
Dec 12, 2009I was on my Compaq V2310US laptop and noticed it was running slow, so I decided to run chkdsk just for the heck of it. It appeared to freeze at around 33%(but now I dont think it did), so I turned it off. I restarted it, noticed that it just stayed at 33% for awhile and left it this time. Now when I start windows 7 ultimate, it says "starting windows" then boots to a blank screen. No welcome screen or anything.
The mouse pointer is there and my wlan button and capslock work, but the mute sound button doesnt respond. If I boot in safe mode, CLASSPNP.SYS is the last file to load and I get the same black screen problem. Im wondering why theres no AGP440.SYS. I have the ATI M200 chipset and when I updated it awhile back, my PC did the same thing, however I was able to go into safemode and uninstall it.
I got another option to update it a week later(which made windows aero work) saying the driver was for windows 7 and it worked. My advanced options are limited to the 3 safe modes and normal mode. Startup repair didnt do anything. Thanks for any help
Parallel Port Print Job Error
Jul 4, 2011At work we installed 2 new desktop computers in a network with windows 7 so we had to update our Canon IR 2200 driver to make the printer work properly.
Sometimes when we want to print files the machine is printing nonsense (zdingbats on the upper side of the paper but only a few lines not the whole page) and we have to cancel the printing task on the printer because apparently once it starts it won't stop.
On the screen of the printer in the journal there is written: document name: parallel port print job (instead of microsoft word, excel, ...) username: / (instead of the name of our network)
bug in the driver or is there something wrong with the connexion?
What Process Is Using Port 8080 So That Can Open Up Port To Run Software
May 16, 2011I recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
View 9 Replies View RelatedVGA Port And A DVI-D Dual Link Port?
Mar 24, 2012I just bought a new computer from a computer shop. It is custom built and has the following:Has 8GB RAM, 3.3ghz intel core i5-2500k, windows 7, Intel HD graphics so upto 1.7GB max video memory, 1 VGA slot, 1 DVI slot.Just to confirm I checked in person and my tower has a VGA port and a DVI-D dual link port.
View 3 Replies View RelatedUsb Port And Lan Port Are Not Working Download
Jul 1, 2012my 2 no usb port and lan port are not working other wise other 1 no usb port working this is new laptop i think driver not installed because when i connect the pendrive there was light showing in my pendrive.so i want drivr
View 2 Replies View RelatedMessage " Socket Error 6001 Port 587 Specified File Could Not Be Decrypted"?
Apr 23, 2012I recently changed Internet providers, from Primus to Bigpond, and suddenly my Incredimail programme ( which I have used for 15 years or so) has started giving me the message " Socket error 6001 port 587 specified file could not be decrypted"After much time spent trying to get it to work I downloaded Thunderbird, put all the necessary specs in and it works fine. With exactly the same specs, pop smtp, ports etc in Incredimail, it still gives me the same message.It's very frustrating, and yes I have gone right through Incredimails Help pages, but in the end it just tells me to contact the Internet provider, who tells me that they because Incredimail is not one of their supported programmes.
View 9 Replies View RelatedComputer Hangs After Post
Jun 12, 2011Computer posts, then checks hard disk RAID status (Healthy), then a white blinking cursor appears on upper left corner on black screen, and hangs there forever, UNLESS i put in a Windows bootable CD, then based on my boot priority order (CD ROM, HD) it reads the CD, then it displays "Press any key to boot from CD or DVD...", for which i don't press anything, and the computer proceeds to boot Win 7 OS correctly. So basically it doesn't boot unless i just have a bootable CD in tray.
View 3 Replies View RelatedReboot Loop Before Post?
May 2, 2011The problem is minor and it's just a bit of an annoyance I've been dealing with from time to time.[CODE]Basically, If I were to I put my computer to sleep(using the sleep function, not hibernate) and try to wake it up within a few seconds, the computer would go into an automatic reboot loop that would continue to boot, shut down, boot, shut down until I turn off the PSU completely. I'm trying to figure out which component might be causing this problem, if any. I've updated my bios, drivers, and ran memtest but nothing seemed out of the ordinary and it didn't fix the problem.
View 2 Replies View Related[64-bit] POST Stalls At USB Drive?
Sep 17, 2012I've done a search for issue and found none. I have a 2 Terabyte Seagate USB drive.When I try to boot with this USB drive connected to computer the POST hangs. Once I remove the USB drive the system boots as normal. My system also has a USB RF Transceiver for the keyboard and mouse. It causes no problem though just the drive.
View 9 Replies View RelatedPost Text Only Page To Web With Url
Feb 18, 2013I have what may be an unusual question. How do I post a plain text-only page up on the internet? An example of what I want is url...There's no html on this page. Only plain text.I tried to do this on Google Sites using the "Add Files" feature, but when I go to the link it goes right to a "download file" dialog box which is not what I want. url...
View 3 Replies View RelatedNo Post, No Bios, No Boot From CD?
Nov 26, 2011Seems to be Deadand now other other HP desktop (with the identical motherboard) is now failing as well. This one is a pc6000, and all I ever get is the screen that displayes the BIOS, processor, CPU speed and the 4 memory banks. So far, so good.Then it says Initializing USB controllers.DoneThen several blank lines before it says Press <F10> to enter SetupThen nothing... although sometimes after the 'Done' line it says 1st Drive: None2nd Drive: None3rd Drive: None4th Drive: None00 USB mass storage devices found and configuredbefire going to a new screen where it sayseboot and Select proper Boot device or Insert Boot media in selected Boot device and press a keyPressing any key just redisplays the msg.What could possible be going on with these 2 nearly identical HP desktops with the same mobo?
View 9 Replies View RelatedPost Upgrade Problems
Nov 9, 2009I had no problems with the first two computers that I upgraded from Vista to Windows 7, both were 64bit systems. I'm having post upgrade problems from vista to windows 7 with my 32 bit machine (Sony Vaio VGN-NR430E). THe machine did fine with the compability check for Windows 7.
Problems:
1) Some icons on the desktop are not appearing. Instead of the icon, I just have a white icon in it's place.
2) Taskbar icons are either white or blank. If I click on the white or blank icon the application will run, If I hover over the blank or white icon it tells me what application it is.
3) Control panel icons are not present.
4) Start menu icons and folders are white. If I click on them, it just hangs like it is trying to do something and will remain like that until explorer crashes.
Ideas that I tried but did not work:
1) Tried rerunning the Windows 7 upgrade. But when it gets to the compability check, the check just keeps running. eventually I then must cancel out of the upgrade
2) Tried a chkdsk at bootup. No errors, but it did not fix my problem.
3) Tried rebuilding the iconcache. Did not work
4) Tried some other type of scan (sfc /scannow)that was started from the command prompt. it did not work.
Way To Make Own Key Combination During Post?
Aug 31, 2010I found this document to be quite interesting:Install Windows 7 FAST without a DVD or USB device[2]=General Tips..Now when you get a computer from Dell, HP, ect. they have prepared a factor key combination to acess the recovery partition to start it up.Is there a way to make your own key combination during post? For instance, what if you make the perfect image...having it on a disk partiton is so much faster than a usb disk or even a dvd.
View 2 Replies View Related
