Hard Drive Low WEI Score
Feb 5, 2009Since switching to Windows 7 x64 my hard drive is only scoring 2.9 in WEI. Under Vista it was 5.6 or something around there. Is there a reason for this?
View 1 RepliesSince switching to Windows 7 x64 my hard drive is only scoring 2.9 in WEI. Under Vista it was 5.6 or something around there. Is there a reason for this?
View 1 RepliesAs my hard disk, I have a 1TB Western Digital Caviar Black Edition.. it's 7200RPM, 32MB cache. Yet, WEI only gives it a score of 5.9. Everything else on my PC is a 7.0 or above.. any reason for that?
View 9 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View Relatedwhat's wrong with RAM's score? In previous builds was OK (7.x)...
It's DDR3 1333.
I have a macbook air with i7 1,8Ghz 2466M,and in win 7 ultimate edition 32bit my score is 3,3 for proccessor.
View 2 Replies View RelatedMy SSD was running on a wei score of 7.8, i have done nothing recently to cause this to change but i checked up on my wei score recently and suddenly its back to 5.9 .I discovered the problem is that in the detailed analysis, and its reading my HDD as the primary hard disk.I refreshed the wei and it still comes out as 5.9, i have no idea why this has happenedthere is no reason for it to have happened as i have changed nothing as of recent. So basically my question is how do i make wei read my ssd instead of my hdd as the primary hard disk like it was before?
View 2 Replies View RelatedI am having the strangest readings from WEI.
Currently I am running Corsair 4 x 1GB PC6400 DDR2 RAM (5-5-5-18). At stock speeds, WEI is reporting a score of 5.5.
My roommate also has 4 x 1GB of DDR2 with SAME timings and he is getting a WEI score of 7.1. A HUGE difference.
I have tried overclocking my RAM to 4-4-4-12 at 900MHz and 2.1V. WEI STILL reports a 5.5 rating.
I have also recently bought 2 x 2GB DDR2 G-Skill RAM with 5-5-5-15 timings. WEI STILL gives a 5.5 rating.
I have also tried running 2 x 1GB of my Corsair RAM... HALF of what I usually run. WEI STILL gives a 5.5 rating.
Also, on the Sticky thread in this forum about memory assessment, mine hovers around 5863 MB/s... I've seen people post in there with slower timings then what I have mine overclocked at and get faster speeds...
Edit: I just put my RAM back to default timings... I am still getting the same MB/s rate. WHY?!
Edit: Roommate just ran winsat mem in the command console and got a 7000 MB/s rating whereas I am getting 5863... he has the SAME RAM just different companies.
What the crap is going on? Massively overclocking my RAM doesn't even change the rating slightly. Any help into this would be awesome.
I get 5.9 on my ram, why is it so low?
It seems to be fast, but not according to WEI.
What's your memory assessment speed?
I have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
I have intel HD 3000 and GeForce GT 525 M (laptop) but the graphics score is always 4.9 !!! in Win 7 and Win 8
View 4 Replies View RelatedLooks like the NHL score is not showing up anymore in Media Center in the Sports Section. I' ve Checked that it is enable and if i try the Nfl score it works fine.Anyone having this problem, im getting this on both of my Mce (desktop and laptop) If you have another app that would do the job or displaying nhl scores i'm up for it also.
View 4 Replies View RelatedRecently I wanted to check out WinXP. I installed it and it ran pretty good. But Since I use Dx 10 for some of my gaming I decided Re-install 7. When I returned to 7 I noticed WEI giving me a lower score then what I used to have. I used to have a 4.2 Aero / 5.4 Gaming graphics. Now its showing at best a 3.8 Aero / 5.3 Gaming graphics score. I say at best because first going into Windows after the re-install it showed 3.7 Aero / 5.2 Gaming. And at the 2nd day in use 3.8 Aero / 5.3 Gaming. I did everything normal as always, installed DX update, Java, Flash, Visual C+. So maybe it just needs time to improve itself or maybe I'm missing something I don't know. The Graphics Driver is up to date and is setup as it always was when I had the high score. I know Windows 7 Improves Performance over time with superfetch so I'll continue to monitor it.
View 1 Replies View RelatedI have Windows 7 Ultimate. My issue is, the Win, Experience Index, does not work!
View 3 Replies View RelatedI have sony Vaio VPCEC290X before Windows Experience Index was 5.1 but now it reduced to 3.5 i have update to latest bios a i have check power settings cleaned laptop dust also but the score is still 3.5 what might be the problem i have contact sony care also they checked and told nothing problem with your hardware
View 1 Replies View Relatedmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI'm using the integrated video in an i7 3770 CPU, the Intel HD4000 graphics.The original Intel driver supplied by the motherboard vendor, 8.15.10.2618 gives a Windows Experience Index score of 6.5 for both Graphics and Gaming Graphics.I did a driver scan from Intel and it showed there was a newer video driver available8.15.10.2761. I installed the latest video driver and the WEI score for both Video items dropped to 5.8/5.9I reinstalled the older driver and the WEI score was back to 6.5.
View 2 Replies View Relatedhad a look and cant find similar issue anywhere. Basically i have a dell inspiron 1520 with x3100 i had to reformat windows 7.Everything is fine except i can noticably tell my games are slower than before. I ran the WEI and gaming graphics is reported at 3.1The gaming score of WEI before i reformatted was 3.5. I have the latest windows 7 x3100 drivers from intel.com since the dell site supports vista x32 only. i have latest chipset drivers.
View 4 Replies View RelatedI have just bought a Acer Aspire 5735 running Vista 32 bit. It has 4gb ram and a Intel 2 duo T6400 processor. I have installed win 7 upgrade and found the performance score dropped from 3.7 to 3.4. The upgrade was installed on Vista as from the factory without any extra software. I have tried to upgrade to Win 7 32 bit but it wont accept that although the computer should be suitable.
View 4 Replies View RelatedHow to Update or Refresh the WEI Score in Windows 7 ?
View 0 Replies View RelatedHow to measure or view my Windows disk performers score?
View 12 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.