Why Memory Score So Low ?
Apr 8, 2009I get 5.9 on my ram, why is it so low?
It seems to be fast, but not according to WEI.
What's your memory assessment speed?
I get 5.9 on my ram, why is it so low?
It seems to be fast, but not according to WEI.
What's your memory assessment speed?
what's wrong with RAM's score? In previous builds was OK (7.x)...
It's DDR3 1333.
I have a macbook air with i7 1,8Ghz 2466M,and in win 7 ultimate edition 32bit my score is 3,3 for proccessor.
View 2 Replies View RelatedMy SSD was running on a wei score of 7.8, i have done nothing recently to cause this to change but i checked up on my wei score recently and suddenly its back to 5.9 .I discovered the problem is that in the detailed analysis, and its reading my HDD as the primary hard disk.I refreshed the wei and it still comes out as 5.9, i have no idea why this has happenedthere is no reason for it to have happened as i have changed nothing as of recent. So basically my question is how do i make wei read my ssd instead of my hdd as the primary hard disk like it was before?
View 2 Replies View RelatedI am having the strangest readings from WEI.
Currently I am running Corsair 4 x 1GB PC6400 DDR2 RAM (5-5-5-18). At stock speeds, WEI is reporting a score of 5.5.
My roommate also has 4 x 1GB of DDR2 with SAME timings and he is getting a WEI score of 7.1. A HUGE difference.
I have tried overclocking my RAM to 4-4-4-12 at 900MHz and 2.1V. WEI STILL reports a 5.5 rating.
I have also recently bought 2 x 2GB DDR2 G-Skill RAM with 5-5-5-15 timings. WEI STILL gives a 5.5 rating.
I have also tried running 2 x 1GB of my Corsair RAM... HALF of what I usually run. WEI STILL gives a 5.5 rating.
Also, on the Sticky thread in this forum about memory assessment, mine hovers around 5863 MB/s... I've seen people post in there with slower timings then what I have mine overclocked at and get faster speeds...
Edit: I just put my RAM back to default timings... I am still getting the same MB/s rate. WHY?!
Edit: Roommate just ran winsat mem in the command console and got a 7000 MB/s rating whereas I am getting 5863... he has the SAME RAM just different companies.
What the crap is going on? Massively overclocking my RAM doesn't even change the rating slightly. Any help into this would be awesome.
I have intel HD 3000 and GeForce GT 525 M (laptop) but the graphics score is always 4.9 !!! in Win 7 and Win 8
View 4 Replies View RelatedSince switching to Windows 7 x64 my hard drive is only scoring 2.9 in WEI. Under Vista it was 5.6 or something around there. Is there a reason for this?
View 1 Replies View RelatedAs my hard disk, I have a 1TB Western Digital Caviar Black Edition.. it's 7200RPM, 32MB cache. Yet, WEI only gives it a score of 5.9. Everything else on my PC is a 7.0 or above.. any reason for that?
View 9 Replies View RelatedLooks like the NHL score is not showing up anymore in Media Center in the Sports Section. I' ve Checked that it is enable and if i try the Nfl score it works fine.Anyone having this problem, im getting this on both of my Mce (desktop and laptop) If you have another app that would do the job or displaying nhl scores i'm up for it also.
View 4 Replies View RelatedRecently I wanted to check out WinXP. I installed it and it ran pretty good. But Since I use Dx 10 for some of my gaming I decided Re-install 7. When I returned to 7 I noticed WEI giving me a lower score then what I used to have. I used to have a 4.2 Aero / 5.4 Gaming graphics. Now its showing at best a 3.8 Aero / 5.3 Gaming graphics score. I say at best because first going into Windows after the re-install it showed 3.7 Aero / 5.2 Gaming. And at the 2nd day in use 3.8 Aero / 5.3 Gaming. I did everything normal as always, installed DX update, Java, Flash, Visual C+. So maybe it just needs time to improve itself or maybe I'm missing something I don't know. The Graphics Driver is up to date and is setup as it always was when I had the high score. I know Windows 7 Improves Performance over time with superfetch so I'll continue to monitor it.
View 1 Replies View RelatedI have Windows 7 Ultimate. My issue is, the Win, Experience Index, does not work!
View 3 Replies View RelatedI have sony Vaio VPCEC290X before Windows Experience Index was 5.1 but now it reduced to 3.5 i have update to latest bios a i have check power settings cleaned laptop dust also but the score is still 3.5 what might be the problem i have contact sony care also they checked and told nothing problem with your hardware
View 1 Replies View RelatedI'm using the integrated video in an i7 3770 CPU, the Intel HD4000 graphics.The original Intel driver supplied by the motherboard vendor, 8.15.10.2618 gives a Windows Experience Index score of 6.5 for both Graphics and Gaming Graphics.I did a driver scan from Intel and it showed there was a newer video driver available8.15.10.2761. I installed the latest video driver and the WEI score for both Video items dropped to 5.8/5.9I reinstalled the older driver and the WEI score was back to 6.5.
View 2 Replies View Relatedhad a look and cant find similar issue anywhere. Basically i have a dell inspiron 1520 with x3100 i had to reformat windows 7.Everything is fine except i can noticably tell my games are slower than before. I ran the WEI and gaming graphics is reported at 3.1The gaming score of WEI before i reformatted was 3.5. I have the latest windows 7 x3100 drivers from intel.com since the dell site supports vista x32 only. i have latest chipset drivers.
View 4 Replies View RelatedI have just bought a Acer Aspire 5735 running Vista 32 bit. It has 4gb ram and a Intel 2 duo T6400 processor. I have installed win 7 upgrade and found the performance score dropped from 3.7 to 3.4. The upgrade was installed on Vista as from the factory without any extra software. I have tried to upgrade to Win 7 32 bit but it wont accept that although the computer should be suitable.
View 4 Replies View RelatedHow to Update or Refresh the WEI Score in Windows 7 ?
View 0 Replies View RelatedHow to measure or view my Windows disk performers score?
View 12 Replies View Relatedhow to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
View 1 Replies View Relatedi am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.
machine: dell xps studio 8100
os: win 7,
processor: i7 2.8
ram: 16gb (max it will take)
video: ati radeon 5700 (running 3 monitors)
versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)
browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.
normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).
I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).
View 9 Replies View RelatedMemory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...
my system :
------------------------
OS : Windows 7 x86
Cpu : Intel P4 3.0GH
Vga : nVidia 6600
MB : Gigabyte GA-8I915G Duo
PSU : Corsair 750W
RAM : 2GB DDR-400 Transcend
(I have these memories for 2 years)
Physical Memory: 2000 mb
Paging File: 2000 mb
Virtual Memory: 6000 mb
0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)
1- Scanning my computer with antivirus and antispywares
2- Changing antivirus software
3- Updating windows with all updates available via Windows Update
4- Updating drivers of all hardwares
5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2
I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.
I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.
Computer specs:
Windows 7 HP 64-bit
gSkill 16gb 1866 memory (BIOS shows it at 1866, too)
Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets)
ASRock z68 Extreme4 mobo
I recently bought 2x1GB Ram Sticks for a Dell DimensionE510It has a Pentium4 2.80Gh Processorand factory 1 GB RAMIt's currently running Windows 7 x64hen I put the new RAM sticks in the system recognizes the new memory says it has 3.0 GB of ram and runs until I start actually using to new memory, as in start running more programs simultaneously and it crashes and I get two BSOD*. As far as I know the sticks match the motherboard, as in that's what I was told.*"Memory Management" and "PFN List Corrupt"As far as I understand it is a driver issue, but I honestly am not sure.
View 6 Replies View RelatedTo start, I have Windows 7, on Sony Vaio laptop. I have been working on the issues with the malware removal team, but now machine looks clean, I am still having issues. When starting the computer and going to the task manager, I can watch explorer.exe start at about 18K memory usage and then grow constantly until it is running with almost all of the computer's physical memory after about seven min. I cannot get the context menu to show up after a few min by right clicking on anything. I had been experiencing "freezing" while playing Eden Eternal (an online role playing game) before that, which made me consider malware and seek help here at BleepingComputer. The freezing has ended, last time I played on that machine at least, but now there seems to be some issue with the explorer.exe taking all of the memory. I haven't been using the machine since I don't trust that there's not something running in the background that shouldn't be. In resource monitor there were "connections" that had "-" for both the name and the PID, but I don't know if that was the malware of if that's normal somehow? Issue with explorer.exe seems to be limited to only one user account, and not the other one. That is to say that if I log on one of the other accounts explorer.exe behaves normally, as far as memory usage.
View 12 Replies View RelatedI have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.
View 9 Replies View Relatedmy camara says memory card is protected (reset switch on memory card) how do you do this the camara wont take photos untill this is dun
View 1 Replies View RelatedWin 7 x64, all updates. intel core 2 duo E8800. 8gb ram in 2 pairs. Nvidia 9800GT.2x HDD with lots of free space. ESET antivirus + Outpost firewall Every time I shut down the computer, I get an error like this:The instruction at 0x72f151d3 referenced memory at 0x72f151d3. The memory could not be written.Sometimes they will auto close, others I will have to force the shutdown.The thing that seems interesting is that there's a pattern to the memory addresses.When it's a software exe crashing, it's always 0x7xxx51d3.When it's explorer.exe crashing, it's always 0x7xxx87bc.
View 4 Replies View RelatedSo i have 32x Windows 7 I also have 8GB of memory.
My question is how much memory can this architecture actually see? its 32bit, so shouldn't it only see a max of 4? in the my computer properties, it tells me i have 8, but a bunch of programs tell me i have the 3.25.
Do i need to move to 64x? and what happens with the drivers for my custom built pc? will i be able to find them? (most of my disks wont install 32 bit drivers on Windows 7 beta) i cant really do the vista driver backup with driver max, because i use XP
any help? ideas? suggestions? Thoughts? Comments? Wize cracks?
How can I tell how much ram/memory my system is using at any given point?
View 9 Replies View Relatedi'm using windows 7 ultimate x64 with a galaxy Geforce 9600GT.
i have 8GB of ram .
on dxdiag under display tab
it says approx total memory: 4096MB.
WOW!!
my GPU is only supposed to have 512MB not 4GB!!! Is this for real?does it actually work and would i notice any improved graphical performances? also is it possible to reduce or increase that number?
so my freshly installed win 7 OS takes up almost 1GB of my physical memory.. is this normal? if so i hope it changes..
when i open the task manager i can't see any processes taking up that much space either