HTPC And Windows 7 Key?
Jun 1, 2010
First let me say, I have purchased a copy of Win 7 Ultimate upgrade from my university. I am NOT, repeat NOT, asking about pirated software. I am asking about a copy of Windows Ultimate 7 Upgrade.I have had issues recently with my system. After a whole lot of BSODs and reinstallations, I have isolated the problem and subsequently relegated that computer to being a home theater PC. During the setup, I was installing Windows. When I put in the key, it rejected it. I input it about 10 times, each time verifying it, and it kept rejecting it. I have installed this copy several times before, and had no problems previously. This is a fresh install, and the installation went smoothly up until that point. I did let it sit for about an hour during the installation. It sat at the point where you put in the username/password and then the windows key.
View 4 Replies
ADVERTISEMENT
Nov 22, 2011
My home built HTPC is based on Asus M2n-SLI mobo and ATI Radeon HD 5450 video card with HDMI out to Onkyo 7.1 receiver which passes video and audio via HDMI to Olevia 36 inch LCD TV. PC (ATI card)-- HDMI out --> stereo receiver -- HDMI out --> TV The HTPC is never turned off. When I turn on the receiver and TV components to watch TV, Win 7 (Home Premium, 64 bit) will mute the system. I cannot just unmute. I have to go into Control Panel > Sound. There I find only one option (expected): AMD HDMI output.When I right click and choose Test option, it works just fine. I make no changes to the configuration and the sound/speaker icon in the system tray is normal. Then I open Media Center and everything works fine. When I'm done watching TV, I turn off the receiver and TV. When I start another session, the problem is back.I did not have this problem with an older receiver but using completely different component connections. PC -- HDMI out --> TV -- audio out --> old stereo receiver.
View 2 Replies
View Related
Nov 29, 2011
I built a HTPC with a video card that does DVI and hdmi. The motherboard has a VGA.
But I also need either: s-video or composite What should I do? I don't want to like "downgrade" the video card and just use an old one for everything. Can I run them both? Like switch back and forth? "Simultaneous" is not required.
Also, I would already be using the PCIE 2.0x16 for the video card. I have PCIEx1 and PCI slots open. EDIT: I found this... [URL]
Would this work in letting me switch between the onboard video and the video card?
View 1 Replies
View Related
Jul 3, 2012
Basically I know virtually NOTHING about video cards. Last time I got one it refused to work in my computer (an Old Dell).Basically I want to be able to decode 1080p (and do re-encoding, not necessarily 1080p) without my computer bogging down. And I want to stream to my Xbox with subtitles, which my G620 simply CANNOT do (as it requires burning in subtitles on the fly before streaming it to the xbox).I don't want a super expensive GPU, but it needs to be low-profile to fit my case (info in hardware description)
View 7 Replies
View Related
Nov 19, 2011
I *think* I've managed to figure out that an AMD Radeon HD 6850/70 will work for playing 3D Blu-Rays with TotalMedia Theatre 5, onto a Samsung 6000 series 3D TV with Active Shutter glasses over HDMI 1.4a.
View 2 Replies
View Related
May 23, 2011
I am currently building an htpc that will be used solely for watching movies from my hard drive, blu ray discs, and online streaming. I am trying to find an hd media player that is very light and simple. I have tried KMPlayer but it seemed to open fairly slow on my current computer, which isn't slow. I have also tried splash lite which I really like, but on some of the movie files it does not play sound, so no go there. Any other suggestions about what software would be the best? It doesn't need to be powerful because I will just be watching movies, I mostly want it to open fast and and have a small footprint.
View 3 Replies
View Related
Sep 28, 2011
got myself a little pc that im using as a HTPC... I initially purchased a DisplayPort to HDMI cable to connect the htpc to the pioneer amp and then to the tv the video signal works perfectly, but i couldn't get any sound coming through, so then i tried adding a audio jack from the htpc to the amp, still no luck...i have test the sound from the htpc and the sound come out from there, but when connect to either the amp or tv, via the audio jack it doesnt work HP Compaq 8200 Elite Ultra-slim PC specifications - HP Small & Medium Business products?
View 1 Replies
View Related
Nov 24, 2012
Some time ago i put together a HTPC with a Asrock A75M-HVS mtherboard (VIA VT1705 Audio Codec) hooked up to my tv with HDMI(sound+video), installed windows and installed on the drivers from Asrocks website.Today i was thinking that I had probably installed the audio drivers over the windows drivers and i wanted to make sure i had the latests drivers from VIA, i was looking around how i could stop windows from installing audio drivers, i found a method using gpedit.msc wich seemed to work, it blocked windows from installing its own driver.So I downloaded the latest driver from VIA website (this was a newer version then from asrock's website). I think it installed correctly but the only thing that showed under playback devices was "Speakers", the digital hdmi output had dissapeared.I tought this was a problem with the driver so i download the one from Asrock thinking this one has to work, but the same problem.This had taken several hours of messing around so i tought screw it, ill take the windows drivers, so I let windows install and it seems to work and i got my sound back, under playback devices there are now 2 options again "speakers" and "digital audio hdmi". I get sound using the digital audio output, but only stereo, when i click the configure option it doesnt let me pick 5.1.I dont really care anymore what driver I have, I would just like to have my 5.1 back,
View 3 Replies
View Related
Aug 27, 2011
I built a tiny yet powerful HTPC with the new sandybridge Intel i3 CPU. is there some kind of software that will turn off the spinning HD when it is not needed and only turn on if say a tv recording is scheduled for a certain time, record the show, and then turn the hd off again. it runs windows 7 64 bit, 8 gigs of ram, 2tb hd, blu ray burner.
View 3 Replies
View Related
Apr 6, 2012
I tried searching first but I seem to have trouble finding the proper terms to narrow the search enough... So I just post this.I put together a HTPC for 24/7 usage (windows media center and iMON remote control, spotify, PowerDVD for Blu-Ray movies). Minimal amount of additional software installed. The problem is it locks up often. The whole Windows 7 goes fully unresponsive (all you can do is power off -> on). It rarely stays responsive for 48 hours. No crash dump is generated. The event log shows nothing special, mainly two error items, one related with errors on Microsoft Security Essentials and the other is Circular Kernel Context Logger session failing to start.The main question is: what is there to do, is there a program that could monitor which other program seems to halt the system? I'd hate to go through eliminating each and every software/hardware component... The second question is: just in case, does anything below ring any bells what might cause the problem?
[code]...
View 3 Replies
View Related
Jul 17, 2012
Currently I'm using the Logitech K400 wireless keyboard with a built in trackpad, but for my next system build I won't be using it because of finicky reception. I'm currently looking for alternatives, and I want your advice. Currently I'm considering one of these: IOGEAR GKM561R Black 2.4GHz Wireless HTPC Multimedia Keyboard with Laser Trackball and Scroll Wheel IOGEAR GKM561R Black 2.4GHz Wireless HTPC Multimedia Keyboard with Laser Trackball and Scroll Wheel. (They seem to be identical but Newegg lists them separately).
View 7 Replies
View Related
Sep 12, 2012
I am using a very cheap receiver from Amazon with the PC Remote Control drivers provided by Eventghost. From my other readings the best way to identify the remote is the presence of [URL] in the GUID. My problem is this. When I put the computer to sleep and begin watching another source, the commands from the television remote are detected by the IR receiver and wake the PC. Is there any way to select which signals would wake the computer?I currently have the power management settings configured to not allow the IR receiver to wake the computer and use the power button to wake it?
View 2 Replies
View Related
Aug 29, 2009
I'm thinking about building a new main PC and hooking my current one up to my receiver and plasma tv (50" Pioneer Kuro 720p). If I put a BluRay player in the new PC, will I be able to display it on the tv over the network or does the BluRay player need to be in the HTPC? My current machine's mobo is IDE, not SATA, so I assume that would limit my options on a BD drive.
View 3 Replies
View Related
Aug 24, 2011
here's the system specs;
ECS H67H2-M black
Intel i3-2100
4GB (2x2GB)DDR3 1333MHz Twinmos 9-9-9-24
2TB Samsung HD204UI HDD - OS, media and files
Thermaltake Toughpower 600W PSU
Lite-on DVD+/-RW
Windows 7 x64 Ultimate
I'm having a whole store of BSOD's but the really bugger is the part where i can't shutdpwn the rig completely. If i press shutdown via start in win7 the rig shuts down fine and dandy...but give it 3 secs and it powerback up again..
View 12 Replies
View Related
Jun 25, 2011
I am experiencing a unique issue with my WMC HTPC box. Anytime I watch content from either WMC7 or WMP7 I get audio and video stuttering every minute. Sometimes, the stuttering will cause the box to freeze up, forcing a restart. At no time do I receive memory warnings prior to or after each event. I've tried restarting the computer in the hopes of clearing the RAM, clearing the Temp Files, and running ChkDsk (at the time of this posting, the process has taken over 1 hour to complete - not sure if this is normal). I also installed Process Explorer to see if the issue was memory related. While it appears that WMC is hogging up to 3/4 of my RAM at some points, usage is mostly confined between 1.3-1.7 GB.
The spikes occur regardless of the RAM usage but not when WMC is running idle (meaning ON but not displaying content other than the main menu). Process Explorer appears to show that the issue is possibly related to SVCHOST - when I place my mouse over each spike, it displays SVCHOST but not the programs which that particular version of HOST is running. I am running WMC7 64-bit, with two 500GB drives (one mirrored), a third drive (2TB internal) for video and music, 4GB of RAM, an Intel i3, a Hauppauge 1850 Dual Tuner, and a ASUS P7H55-M PRO motherboard. I will update with ChkDsk info when it finishes.
View 7 Replies
View Related
Aug 29, 2012
I've recently started to experience a BSOD problem I cannot quite put my finger on. It does not save a log, even though I have it set to save in /Minidump. I have not changed or added any hardware, or software. I completely wiped Windows and started over from scratch, using the most up to date drivers. However they're still occurring, I've restored my BIOS settings to all default settings. I am thinking it was a Hard drive issues, I've ran CHKDSK all both drives - I know my Windows drive was clean, I was not around to see the completion of of my slave drive - I was running CHKDSK via Safemode and came back to a BSOD. I've attached a administrator Eventlog, but am unable to make much sense of it.
The last BSOD I saw read this;
Code: KERNEL_DATA_INAPGE_ERROR
*
*
STOP: 0X0000007A (0XFFFFFF6FC4000099C0, 0XFFFFFFFFC000000E, 0X00000001E7588860, 0XFFFFF88001338890)
NTFS.SYS - Address FFFFF88001338890 base at FFFFF880012450000, Datestamp 4ce792f9 I've ran Memory test already, no errors where found. The next step I am going to try is too unplug my Slave drive and see what happens without it. I've already re-seated both drives and memory sticks.
View 1 Replies
View Related
Feb 19, 2012
I have just set up an HTPC and would like to partition the drive so that I have a small drive of, say 32gb for OS and the rest for storage. According to the system (after fist shrink) the c drive is 204gb free of 295gb, but I can't shrink it further. I've done a disc clean up and emptied the recycle bin. What can I do to shrink this to a minimum?
View 9 Replies
View Related
Sep 20, 2011
I have recently purchased all the parts for a computer from Newegg (still waiting for it), with the understanding that the HD graphics capabilities of the Sandy bridge Pentiums will be more than capable of playing back most formats flawlessly (and being able to convert some odd formats to WMC-friendly versions ahead of time), alongside beng used as a sort of download server for the house.
View 3 Replies
View Related
Dec 28, 2011
I am copying files from a WHS 2003 to a back-up drive on a HTPC. The WHS and the HTPC are connected physically to a router. The back-up drive is USB 3.0 and plugged into a 3.0 USB input on the HTPC.
The transfer rate is only 40MB/second. Why is this? The data is being transferred via CAT6 cables from the WHS/Router/HTPC and then USB 3.0 to the external drive
View 4 Replies
View Related
Jul 13, 2012
Hi everyone. I installed Windows 8 today. I did partition the disk like in a guide, however, I missed where to install...I downloaded a Windows 7 iso image today and burned it to a disk, will I be able to install Windows 7 again from a disc? I still have Windows.old folder in my C drive, is there any way to dual boot Win8 and Windows 7?
View 9 Replies
View Related
Jun 8, 2011
I am getting the following error from past 2 days :-It says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your Computer".
Status: 0xc0000225.
Since i dont have the recovery disc so i downloaded the one from torrent but of no use as it failed to read from the USB.
View 5 Replies
View Related
Jan 25, 2012
I installed Win 7 Ultimate onto my brothers Win 7 Home Edn laptop. I didn't realise at first and he has done quite a bit of work on it since the installation, on iTunes and the like. I only noticed the error when trying to activate windows and, of course, as the laptop is Home Edn, and I used an Ultimate disc it didn't take the key on the laptop. So I have now installed Home edition and have the Windows.old folder present. I basically need to put all the programs and file/folders etc into the new OS.
View 4 Replies
View Related
Oct 18, 2012
the XF's are lost after rebooting Windows and it does not happen every time, ie occur alternately eg after 2 and sometimes 10 days...then i go to device manager sound and i have sb x-fi but at sound i havnt sound icon so i click right at sb x-fi icon at dm and uninstall...reboot windows..after rebooting sond install by itself my sound card from motherboard is disabled at bios.
View 7 Replies
View Related
Nov 26, 2011
the stellar customer service at Dell I have had to recently reinstall windows 7. I was running windows 7 prior to this installation and therefore those files have been moved to windows old. How do I reinstall this file? I'm assuming the process is the same as for other versions but being as I'm not that technically savvy I don't know how to change the command scripts to suit my situation.
View 9 Replies
View Related
Aug 18, 2011
I have a PC running Windows 7. It is constantly being locked out, and windows XP and windows 2000 both allow you to use the windows tool ALockout.dll to discover which process is causing the lockouts. Does anyone know if there is a similar program for Windows 7?
View 6 Replies
View Related
Apr 22, 2011
MS and their mail systems are giving me grief. I have a Vista 32 PC using "Windows Mail" and want to transfer email folders (lots) and messages to Windows 7 using Windows Live Mail 2011.Windows Mail was a replacement for Outlook express on Vista.Windows Live Mail 2011 is a replacement for Windows Mail on Windows 7.I tried a couple of things.
1) Basic Export and ImportI exported relavent files: Account info, Contacts and all the messages to a folder (in Windows Mail format) on old computer and used the old "Addias" transfer - copied folder to stick and RAN it over to the new computer.
- Imported (using the Windows Mail format) the Account info successfully,
- imported the Contact info successfully.
- Import Messages - appeared at first to be successful
Issue: Message folders appear to be renamed and some folder names have been truncated, not all folders appear to be there. (Looks like "long Name folders greater that 8 characters get truncated)
2) Tried the "Easy transfer mechanism (Vista and Win7 transfer utility) - but couldn't get the new computer to see the Vista even though I could see them on the network. I thought that this would transfer the folder names correctly.I'm about to try a time consuming effort of coping folder by folder (export/Import)What I am more concerned about is that the individaul messages may have the same issue Ie not all coming accross and subject names being lost. Looking for alternative or third party transfer solutions?
View 3 Replies
View Related
Jul 17, 2012
I just bought myself some new parts for a new computer I built. After buying the parts and assembling it I tried to install windows 7, keeping in mind that this computer has no previous os installed in it, completely blank. I somehow managed to get to safe mode and install till the part where it says expanding windows files completing that step fully and rebooting to continue the installation, I have no idea why but after when it restarts, it freezes at the "starting windows" screen with the four orb animation. It should just go to the next screen with the blue wallpaper asking me for the language I would like and what not. But it just gets stuck there and doesn't move on, I tried
rebooting
removing as much devices I had plugged into the motherboard
removing everything but the mouse and key board
removing the graphics card
removing one of the two sticks of ram
[code]...
I have tried everything I know of and I don't think I need to update my bios because no one else has encountered this problem. Swell I am not very good with computers I am very new to this so...I also heard about updating drivers , but don't u need to actually be able to login to your computer to download and install them? I can't even log in, I wait for the windows logo to pass but it never does please help Tom Hardware community.
View 4 Replies
View Related
Apr 8, 2011
I bought a new computer that came with a Win 7 HP license, however I already have a copy of Win 7 Ultimate on another smaller HDD that dual boots with XP.I have copied the Win 7 HP partition to the smaller HDD that has dual boot Win 7 Ultimate / XP using EASUS Partition Manager. Then I disk copied the smaller HDD to the new larger HDD thus wiping the original contents of the HDD.So far so good, the larger HDD now has C: Windows 7 Ultimate; D: XP Pro; E: Windows 7 HP. Of course the boot manager only has entries for the C: and D: partition.I think I can use bcdedit to add another entry but I am a little confused about how to do this, I've seen examples for Win 7 and XP or Vista but not for 2 copies of Win 7. Can anyone tell me what bcdedit commands I need to run? For instance I could run "bcdedit /create {} /d "Win 7 HP" but I don't know what to put inside of the {}, I think I need a new UUID but I don't know if I should be running "bcdedit /createstore" first or something else.
View 1 Replies
View Related
May 2, 2012
Yesterday i wanted to change my OS to windows 7 64bits (I had windows 7 32bits before and worked just fine). The installation goes well but when windows install tries to reboot to complete the installation it hangs on "windows start" and reboot again and again. I tried several solutions such as
- Install using a different cd (3 different cds and same problem)
- Install from USB flash (not even working)
- Fix boot system (from command prompt using windows repair cd)
- Re-install windows 32 bits (same problem)
- boot in Safe mode (same problem it reboots again and again)
- Windows system repair (from cd)
PS:I have a Dell inspiron M 560 (Core 2 Quad, 4Go in RAM).
View 9 Replies
View Related
Feb 20, 2012
I have a Toshiba Satellite A505-S69803; serial number Y9340538Q, with Windows 7, 500Gb HDD at 5400rpm and 4Gb RAM... I think that's all correct.Anyway, long story short, I got a b!tch of a virus, which apparantly was doing all sorts of nasty things to the explorer.exe file in particular. So I backed up all my important stuff: files, Uni work, writings, music and photos etc onto an external hard-drive and went about restoring the laptop to out-of-box factory settings by making the Windows 7 Recovery Media Discs. But when I try to use the discs I get told after about 30 minutes The Toshiba Recovery Wizard "Can't read from the source file or disk: PREINST5.SW5" with options to: Try Again (The same thing happens), or Skip (Same message again), or Cancel (in which case I'm back where I started).After the Recovery Wizard failed I chose the option to erase the hard-drive; it then appeared that when I turn on the laptop as normal I was told <Error>: F3-F200-0002 and the Recovery Media Disks still refuse to work.Now, if I turn on the laptop as normal a message telling me to insert the installation disc, choose language and click "repair your computer". So I put in the recovery disc and get the same message.
Toshiba can't help as my A505 is an American model in Britain and out of warranty anyway. Europe Toshiba HQ don't supply the recovery media for the A505 and the American based Toshiba aren't allowed to send the Recovery Media to Europe; so apparantly I get no help from them. And Microsoft can't help me because my laptop was purchased with everything pre-installed so the codes associated with my Windows and Office are comletely irrelevent.I have been told that I need to purchase a compeltely new hard-drive and purchase Windows 7 brand new to get my laptop back up and running. Purchasing a new OS isn't too much of an issue because I can just get XP for a tenner, validate it with Microsoft and then get a student upgrade onto W7-Ult for �60. So �70 in total, I'm fine with that. But do I need a new hard-drive too? Or can I rescue everything I already had?
View 3 Replies
View Related
Aug 30, 2012
I just installed Windows 7 Ultimate on my Dell Optiplex 755. It originally had Windows Vista Business. 64 bit OS. After Win 7 Ultimate installed I immediately want to access files or folders and I'm hit with a Explorer.EXE
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.So after doing some research I re-installed a second time this time formatting the drive first. Then installing Windows 7 Ultimate. As soon as I get to the desktop I received the same error as mentioned.
View 4 Replies
View Related
