HTPC Setup - Shrinking Volume To Minimum Possible?

Feb 19, 2012

I have just set up an HTPC and would like to partition the drive so that I have a small drive of, say 32gb for OS and the rest for storage. According to the system (after fist shrink) the c drive is 204gb free of 295gb, but I can't shrink it further. I've done a disc clean up and emptied the recycle bin. What can I do to shrink this to a minimum?

View 9 Replies


ADVERTISEMENT

Shrinking Volume In Device Manager?

Aug 26, 2011

I have a recently bought 500GB external hard drive (NTFS) which I want to partition to have a 100GB partition formatted to either FAT32 or Mac Extended Journaled.I have 228gb free on the drive, but when I go to Shrink Volume in Disk Management, it says I only have 342mb available?!I've tried de fragmenting the drive, but that doesn't seem to There isn't any software left that came with the HDD, so it can't be that

View 4 Replies View Related

'Parameter Is Incorrect' Shrinking Volume

May 20, 2011

I'm trying to shrink my hard drive (500 GB) so I can try out Mandriva OS but I can't, whenever I try to do so i keep getting parameter is incorrect. Any suggestions guys? Running Windows 7 Ultimate 64-bit. Oh yeah, consider this my 2nd question, before I was trying to make a new partition I tried installing Mandriva via the disk, but it filled like 50 GB worth of files and I can't find those files.

View 1 Replies View Related

Windows 7 Setup Can See RAID Volume But Cannot Install On It?

May 6, 2012

I am having trouble installing windows 7 (home premium) on my new raid array (2x intel 330 120GB SSD in RAID0). Basically, windows CAN see the raid volume. it recognies that there is a single 223 GB volume available. I select "Load Driver" for the volume, and plug in my trusty USB with the appropriate intel SATA RAID drivers. Win7 recognizes that there is a compatible driver on the USB, installs it, but still says: "Windows cannot be installed to this disk. This computers hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu". The format and create new partition options are grayed out for this volume.

Using the Intel Rapid Storage Technology tool, I combined the two drives into a raid0 volume. This is confirmed because when I restart, the raid volume shows up in the RST echo with the right size, and also indicates that the volume is bootable. It is also confirmed because the windows 7 setup only sees one 223GB disk. I have confirmed that in the BIOS, the SATA controller is set to RAID mode (not AHCI). I have confirmed that in the BIOS, the first boot option is "RAID intel SSD". I've tried the RAID drivers that came with the motherboard, Ive also tried the raid drivers available from intel and the latest raid drivers available from the motherboard MFR.

ASROCK extreme 6
Intel Core i7-3770k
16 GB RAM
2x intel 330 120GB SSD
NVIDIA GTX 680

View 1 Replies View Related

Shrinking Of Partitions In Windows 7?

Feb 27, 2012

I have question regarding shrinking of partitions in Windows 7 !I am unable to recover windows due corruption of OS. I have only single partition in which Win 7 is installed. Can I somehow shrink the partition to create Unallocated space to perform a parallel installation to save my data?

View 4 Replies View Related

Shrinking Partition Problem

Jul 1, 2009

first of all im running 7229

ok my 1st problem is my computer is only letting me shrink a partition to 13 gbs when theres 109gbs free

my second problem im trying two install a second operating system but it keeps showing

[ 2.436018 ] ata1; softreset failed device not ready

[ 3.084018 ] ata2; softreset failed device not ready

what does that mean?

View 9 Replies View Related

Shrinking The Primary Windows Partition?

Feb 13, 2012

I'm trying to shrink my primary Windows partition because I want to create a partition to install Linux Mint on. Well, when I go into the Windows Disk Manager and try to shrink the partition, it doesn't let me shrink it more than 32MB. I need quite a bit more space than that.I've disabled System Restore, Hibernation, and the page file.After defragging, I had 200MB of space available to shrink with. That's not much of a step up.I also want to try to avoid third-party applications unless they're basically guaranteed to work. I've heard some horror stories about third-party partitioners completely ruining systems.

View 7 Replies View Related

HTPC And Windows 7 Key?

Jun 1, 2010

First let me say, I have purchased a copy of Win 7 Ultimate upgrade from my university. I am NOT, repeat NOT, asking about pirated software. I am asking about a copy of Windows Ultimate 7 Upgrade.I have had issues recently with my system. After a whole lot of BSODs and reinstallations, I have isolated the problem and subsequently relegated that computer to being a home theater PC. During the setup, I was installing Windows. When I put in the key, it rejected it. I input it about 10 times, each time verifying it, and it kept rejecting it. I have installed this copy several times before, and had no problems previously. This is a fresh install, and the installation went smoothly up until that point. I did let it sit for about an hour during the installation. It sat at the point where you put in the username/password and then the windows key.

View 4 Replies View Related

Soft Recording Volume With Blue Yeti / Increasing Volume Distorts Audio

Mar 28, 2012

so i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!

View 2 Replies View Related

Use 2 Different Video Cards On A HTPC?

Nov 29, 2011

I built a HTPC with a video card that does DVI and hdmi. The motherboard has a VGA.

But I also need either: s-video or composite What should I do? I don't want to like "downgrade" the video card and just use an old one for everything. Can I run them both? Like switch back and forth? "Simultaneous" is not required.

Also, I would already be using the PCIE 2.0x16 for the video card. I have PCIEx1 and PCI slots open. EDIT: I found this... [URL]

Would this work in letting me switch between the onboard video and the video card?

View 1 Replies View Related

Finding A Low-profile GPU For HTPC?

Jul 3, 2012

Basically I know virtually NOTHING about video cards. Last time I got one it refused to work in my computer (an Old Dell).Basically I want to be able to decode 1080p (and do re-encoding, not necessarily 1080p) without my computer bogging down. And I want to stream to my Xbox with subtitles, which my G620 simply CANNOT do (as it requires burning in subtitles on the fly before streaming it to the xbox).I don't want a super expensive GPU, but it needs to be low-profile to fit my case (info in hardware description)

View 7 Replies View Related

Upgrading HTPC For Blu-Ray 3D Playback

Nov 19, 2011

I *think* I've managed to figure out that an AMD Radeon HD 6850/70 will work for playing 3D Blu-Rays with TotalMedia Theatre 5, onto a Samsung 6000 series 3D TV with Active Shutter glasses over HDMI 1.4a.

View 2 Replies View Related

Hd Video Player For Htpc?

May 23, 2011

I am currently building an htpc that will be used solely for watching movies from my hard drive, blu ray discs, and online streaming. I am trying to find an hd media player that is very light and simple. I have tried KMPlayer but it seemed to open fairly slow on my current computer, which isn't slow. I have also tried splash lite which I really like, but on some of the movie files it does not play sound, so no go there. Any other suggestions about what software would be the best? It doesn't need to be powerful because I will just be watching movies, I mostly want it to open fast and and have a small footprint.

View 3 Replies View Related

HTPC To Pioneer AMP - No Sound

Sep 28, 2011

got myself a little pc that im using as a HTPC... I initially purchased a DisplayPort to HDMI cable to connect the htpc to the pioneer amp and then to the tv the video signal works perfectly, but i couldn't get any sound coming through, so then i tried adding a audio jack from the htpc to the amp, still no luck...i have test the sound from the htpc and the sound come out from there, but when connect to either the amp or tv, via the audio jack it doesnt work HP Compaq 8200 Elite Ultra-slim PC specifications - HP Small & Medium Business products?

View 1 Replies View Related

Audio Drivers On HTPC?

Nov 24, 2012

Some time ago i put together a HTPC with a Asrock A75M-HVS mtherboard (VIA VT1705 Audio Codec) hooked up to my tv with HDMI(sound+video), installed windows and installed on the drivers from Asrocks website.Today i was thinking that I had probably installed the audio drivers over the windows drivers and i wanted to make sure i had the latests drivers from VIA, i was looking around how i could stop windows from installing audio drivers, i found a method using gpedit.msc wich seemed to work, it blocked windows from installing its own driver.So I downloaded the latest driver from VIA website (this was a newer version then from asrock's website). I think it installed correctly but the only thing that showed under playback devices was "Speakers", the digital hdmi output had dissapeared.I tought this was a problem with the driver so i download the one from Asrock thinking this one has to work, but the same problem.This had taken several hours of messing around so i tought screw it, ill take the windows drivers, so I let windows install and it seems to work and i got my sound back, under playback devices there are now 2 options again "speakers" and "digital audio hdmi". I get sound using the digital audio output, but only stereo, when i click the configure option it doesnt let me pick 5.1.I dont really care anymore what driver I have, I would just like to have my 5.1 back,

View 3 Replies View Related

Power Management Software For HTPC?

Aug 27, 2011

I built a tiny yet powerful HTPC with the new sandybridge Intel i3 CPU. is there some kind of software that will turn off the spinning HD when it is not needed and only turn on if say a tv recording is scheduled for a certain time, record the show, and then turn the hd off again. it runs windows 7 64 bit, 8 gigs of ram, 2tb hd, blu ray burner.

View 3 Replies View Related

HTPC Locking Up, No Crash Dump?

Apr 6, 2012

I tried searching first but I seem to have trouble finding the proper terms to narrow the search enough... So I just post this.I put together a HTPC for 24/7 usage (windows media center and iMON remote control, spotify, PowerDVD for Blu-Ray movies). Minimal amount of additional software installed. The problem is it locks up often. The whole Windows 7 goes fully unresponsive (all you can do is power off -> on). It rarely stays responsive for 48 hours. No crash dump is generated. The event log shows nothing special, mainly two error items, one related with errors on Microsoft Security Essentials and the other is Circular Kernel Context Logger session failing to start.The main question is: what is there to do, is there a program that could monitor which other program seems to halt the system? I'd hate to go through eliminating each and every software/hardware component... The second question is: just in case, does anything below ring any bells what might cause the problem?

[code]...

View 3 Replies View Related

HTPC Keyboard With Built-in Navigation?

Jul 17, 2012

Currently I'm using the Logitech K400 wireless keyboard with a built in trackpad, but for my next system build I won't be using it because of finicky reception. I'm currently looking for alternatives, and I want your advice. Currently I'm considering one of these: IOGEAR GKM561R Black 2.4GHz Wireless HTPC Multimedia Keyboard with Laser Trackball and Scroll Wheel IOGEAR GKM561R Black 2.4GHz Wireless HTPC Multimedia Keyboard with Laser Trackball and Scroll Wheel. (They seem to be identical but Newegg lists them separately).

View 7 Replies View Related

IR Remote Sensor Wakes Up HTPC?

Sep 12, 2012

I am using a very cheap receiver from Amazon with the PC Remote Control drivers provided by Eventghost. From my other readings the best way to identify the remote is the presence of [URL] in the GUID. My problem is this. When I put the computer to sleep and begin watching another source, the commands from the television remote are detected by the IR receiver and wake the PC. Is there any way to select which signals would wake the computer?I currently have the power management settings configured to not allow the IR receiver to wake the computer and use the power button to wake it?

View 2 Replies View Related

BluRay Over Network To HTPC/plasma?

Aug 29, 2009

I'm thinking about building a new main PC and hooking my current one up to my receiver and plasma tv (50" Pioneer Kuro 720p). If I put a BluRay player in the new PC, will I be able to display it on the tv over the network or does the BluRay player need to be in the HTPC? My current machine's mobo is IDE, not SATA, so I assume that would limit my options on a BD drive.

View 3 Replies View Related

ECS H67H2-M HTPC Not Shutting Down Completely?

Aug 24, 2011

here's the system specs;

ECS H67H2-M black
Intel i3-2100
4GB (2x2GB)DDR3 1333MHz Twinmos 9-9-9-24
2TB Samsung HD204UI HDD - OS, media and files
Thermaltake Toughpower 600W PSU
Lite-on DVD+/-RW
Windows 7 x64 Ultimate

I'm having a whole store of BSOD's but the really bugger is the part where i can't shutdpwn the rig completely. If i press shutdown via start in win7 the rig shuts down fine and dandy...but give it 3 secs and it powerback up again..

View 12 Replies View Related

USB A4 Tech HU-200 Headphone / Its Volume Is Quite High Even When The Windows Volume Is At 0

Jan 26, 2012

I bought a USB A4 Tech HU-200 HeadPhone Its volume is quite high even when the windows volume is at 0, When its at max 100 it works like dedicated speakers Is there any way to reduce the volume beyond the lowest volume of windows 7?

Note: My Headphone does not have any soft of driver or software

View 3 Replies View Related

WMC7 Stutters During Playback - HTPC Box Freezes Sometimes

Jun 25, 2011

I am experiencing a unique issue with my WMC HTPC box. Anytime I watch content from either WMC7 or WMP7 I get audio and video stuttering every minute. Sometimes, the stuttering will cause the box to freeze up, forcing a restart. At no time do I receive memory warnings prior to or after each event. I've tried restarting the computer in the hopes of clearing the RAM, clearing the Temp Files, and running ChkDsk (at the time of this posting, the process has taken over 1 hour to complete - not sure if this is normal). I also installed Process Explorer to see if the issue was memory related. While it appears that WMC is hogging up to 3/4 of my RAM at some points, usage is mostly confined between 1.3-1.7 GB.

The spikes occur regardless of the RAM usage but not when WMC is running idle (meaning ON but not displaying content other than the main menu). Process Explorer appears to show that the issue is possibly related to SVCHOST - when I place my mouse over each spike, it displays SVCHOST but not the programs which that particular version of HOST is running. I am running WMC7 64-bit, with two 500GB drives (one mirrored), a third drive (2TB internal) for video and music, 4GB of RAM, an Intel i3, a Hauppauge 1850 Dual Tuner, and a ASUS P7H55-M PRO motherboard. I will update with ChkDsk info when it finishes.

View 7 Replies View Related

Random BSOD Occurring, HTPC - No New Hardware?

Aug 29, 2012

I've recently started to experience a BSOD problem I cannot quite put my finger on. It does not save a log, even though I have it set to save in /Minidump. I have not changed or added any hardware, or software. I completely wiped Windows and started over from scratch, using the most up to date drivers. However they're still occurring, I've restored my BIOS settings to all default settings. I am thinking it was a Hard drive issues, I've ran CHKDSK all both drives - I know my Windows drive was clean, I was not around to see the completion of of my slave drive - I was running CHKDSK via Safemode and came back to a BSOD. I've attached a administrator Eventlog, but am unable to make much sense of it.

The last BSOD I saw read this;

Code: KERNEL_DATA_INAPGE_ERROR
*
*
STOP: 0X0000007A (0XFFFFFF6FC4000099C0, 0XFFFFFFFFC000000E, 0X00000001E7588860, 0XFFFFF88001338890)

NTFS.SYS - Address FFFFF88001338890 base at FFFFF880012450000, Datestamp 4ce792f9 I've ran Memory test already, no errors where found. The next step I am going to try is too unplug my Slave drive and see what happens without it. I've already re-seated both drives and memory sticks.

View 1 Replies View Related

Windows 7 Changes Forgets SOUND Configuration On HTPC?

Nov 22, 2011

My home built HTPC is based on Asus M2n-SLI mobo and ATI Radeon HD 5450 video card with HDMI out to Onkyo 7.1 receiver which passes video and audio via HDMI to Olevia 36 inch LCD TV. PC (ATI card)-- HDMI out --> stereo receiver -- HDMI out --> TV The HTPC is never turned off. When I turn on the receiver and TV components to watch TV, Win 7 (Home Premium, 64 bit) will mute the system. I cannot just unmute. I have to go into Control Panel > Sound. There I find only one option (expected): AMD HDMI output.When I right click and choose Test option, it works just fine. I make no changes to the configuration and the sound/speaker icon in the system tray is normal. Then I open Media Center and everything works fine. When I'm done watching TV, I turn off the receiver and TV. When I start another session, the problem is back.I did not have this problem with an older receiver but using completely different component connections. PC -- HDMI out --> TV -- audio out --> old stereo receiver.

View 2 Replies View Related

Minimum Requirements To Run CS5?

Mar 22, 2011

I am looking to have someone build a computer to run the cs5 suite. What is the basic I should be asking for?

View 3 Replies View Related

Volume Buttons Is Not Adjusting Volume On New Keyboard

Mar 1, 2012

I just received a new keyboard today: Thermaltake Challenger Ultimate. I went from a Logitech G15.

First thing I did was connect the keyboard and install the software that came along on the CD, it probably also installed the correct drivers. First after this did I uninstall the software and drivers from the old Logitech G15. But before that, and now after, the volume buttons on my new keyboard is still not adjusting the volume when I press them.

A speaker-icon like this shows up when I press the volume buttons, so its not that the keys are not working: (ignore the text behind it, its me writing an assignment)

View 5 Replies View Related

Volume Hotkey (fn+volume+-) Doesn't Work?

Jan 1, 2013

I recently got this problem, that my volume hotkeys stopped working, (Acer Aspire 5560G) AMD High Definition Audio. I also tryed plug in other keyboard that have's volume hotkeys but still doesn't work.

View 2 Replies View Related

Volume Not Loud Enough - How To Bypass Volume Limit

Mar 17, 2009

I like to listen to music loudly sometimes. I have both the volume mixer and my application's volume set to maximum levels, but it's not loud enough for my liking. Is there any way to increase the maximum sound volume in Windows 7?

View 9 Replies View Related

Speaker Volume Vs. Windows And Software Volume

Apr 22, 2012

What is the optimal set-up?

High volume on speakers and low in windows, or low on speakers and highest in windows?

View 8 Replies View Related

Converting Simple Volume To Primary Volume?

May 11, 2010

[email]amtemirak@hotmail.comSpoiler :[spoiler]

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved