I'm thinking about building a new main PC and hooking my current one up to my receiver and plasma tv (50" Pioneer Kuro 720p). If I put a BluRay player in the new PC, will I be able to display it on the tv over the network or does the BluRay player need to be in the HTPC? My current machine's mobo is IDE, not SATA, so I assume that would limit my options on a BD drive.
View 3 RepliesI have a LAN and Homegroup and my wife's and my computer are connect. I also have a BluRay player connected via Ethernet cable to my gateway (cable modem + router), but I cannot see it (I can play Netflix movies on it, though). How can I add the BluRay to my homegroup so that I can play music from my computer to it (or rather to my amplifier via the BluRay)?
View 6 Replies View Relatedso when i put a bluray disk in, nothings happens. i tried to play it through windows media player and it won't accept the file.
View 6 Replies View RelatedI'm trying to connect my Core i7 DH67BLB PC to my LG 60PG70FR plasma tv. While I was installing Windows Ultimate x64 I did it using the HDMI1/DIV option on the TV but the moment I installed the graphic drivers for the motherboard I stoped getting the image on HDMI and can get it only on RGB/PC mode. I have tried chaning the resolution from 800x600 to the highest 2560x1600 to no effect. I also tried to reformat the pc hard drive and reinstall windows but the same thing happened. The HDMI mode only received images till I installed the graphics drivers
View 1 Replies View Relatedhitachi plasma has sound but no picture. 50PD
View 3 Replies View RelatedFirst let me say, I have purchased a copy of Win 7 Ultimate upgrade from my university. I am NOT, repeat NOT, asking about pirated software. I am asking about a copy of Windows Ultimate 7 Upgrade.I have had issues recently with my system. After a whole lot of BSODs and reinstallations, I have isolated the problem and subsequently relegated that computer to being a home theater PC. During the setup, I was installing Windows. When I put in the key, it rejected it. I input it about 10 times, each time verifying it, and it kept rejecting it. I have installed this copy several times before, and had no problems previously. This is a fresh install, and the installation went smoothly up until that point. I did let it sit for about an hour during the installation. It sat at the point where you put in the username/password and then the windows key.
View 4 Replies View RelatedI built a HTPC with a video card that does DVI and hdmi. The motherboard has a VGA.
But I also need either: s-video or composite What should I do? I don't want to like "downgrade" the video card and just use an old one for everything. Can I run them both? Like switch back and forth? "Simultaneous" is not required.
Also, I would already be using the PCIE 2.0x16 for the video card. I have PCIEx1 and PCI slots open. EDIT: I found this... [URL]
Would this work in letting me switch between the onboard video and the video card?
Basically I know virtually NOTHING about video cards. Last time I got one it refused to work in my computer (an Old Dell).Basically I want to be able to decode 1080p (and do re-encoding, not necessarily 1080p) without my computer bogging down. And I want to stream to my Xbox with subtitles, which my G620 simply CANNOT do (as it requires burning in subtitles on the fly before streaming it to the xbox).I don't want a super expensive GPU, but it needs to be low-profile to fit my case (info in hardware description)
View 7 Replies View RelatedI *think* I've managed to figure out that an AMD Radeon HD 6850/70 will work for playing 3D Blu-Rays with TotalMedia Theatre 5, onto a Samsung 6000 series 3D TV with Active Shutter glasses over HDMI 1.4a.
View 2 Replies View RelatedI am currently building an htpc that will be used solely for watching movies from my hard drive, blu ray discs, and online streaming. I am trying to find an hd media player that is very light and simple. I have tried KMPlayer but it seemed to open fairly slow on my current computer, which isn't slow. I have also tried splash lite which I really like, but on some of the movie files it does not play sound, so no go there. Any other suggestions about what software would be the best? It doesn't need to be powerful because I will just be watching movies, I mostly want it to open fast and and have a small footprint.
View 3 Replies View Relatedgot myself a little pc that im using as a HTPC... I initially purchased a DisplayPort to HDMI cable to connect the htpc to the pioneer amp and then to the tv the video signal works perfectly, but i couldn't get any sound coming through, so then i tried adding a audio jack from the htpc to the amp, still no luck...i have test the sound from the htpc and the sound come out from there, but when connect to either the amp or tv, via the audio jack it doesnt work HP Compaq 8200 Elite Ultra-slim PC specifications - HP Small & Medium Business products?
View 1 Replies View RelatedSome time ago i put together a HTPC with a Asrock A75M-HVS mtherboard (VIA VT1705 Audio Codec) hooked up to my tv with HDMI(sound+video), installed windows and installed on the drivers from Asrocks website.Today i was thinking that I had probably installed the audio drivers over the windows drivers and i wanted to make sure i had the latests drivers from VIA, i was looking around how i could stop windows from installing audio drivers, i found a method using gpedit.msc wich seemed to work, it blocked windows from installing its own driver.So I downloaded the latest driver from VIA website (this was a newer version then from asrock's website). I think it installed correctly but the only thing that showed under playback devices was "Speakers", the digital hdmi output had dissapeared.I tought this was a problem with the driver so i download the one from Asrock thinking this one has to work, but the same problem.This had taken several hours of messing around so i tought screw it, ill take the windows drivers, so I let windows install and it seems to work and i got my sound back, under playback devices there are now 2 options again "speakers" and "digital audio hdmi". I get sound using the digital audio output, but only stereo, when i click the configure option it doesnt let me pick 5.1.I dont really care anymore what driver I have, I would just like to have my 5.1 back,
View 3 Replies View RelatedBlu-Ray drive for the Xbox 360? Nope.
This week, rumors popped up again that Microsoft was working on a $100-$150 Blu-Ray add-on drive for the Xbox 360. And once again, the rumors are untrue.
Here's the official statement.
"As we've said before, Microsoft has no plans to introduce an Xbox 360 Blu-ray add-on. Games are what drive consumers to purchase game consoles, and we remain focused on providing the largest library of blockbuster games available." Read more at the source.
I've been keeping an eye on these forums; I find that it provides the most succinct information regarding Windows 7.
I finally bit the bullet and made myself a HTPC running Win 7 RC 64-bit. The whole purpose was to play ripped DVDs (to VOBs) from my NAS, any downloaded shows (as AVI's) from my NAS, and hopefully BluRays via the BD-ROM (I have a PS3, so this was not the main reason).
It seems that I was able to get the first two objectives working without any work. All I had to do was install the latest Catalyst drivers.
However, I can't seem to get Cyberlink PowerDVD 9 Ultra (or Windows Media Center) to play BluRays with anything more than 'stereo.' I've tried to research the topic, but there's just too many acronyms flying around (PAP, AAC, AC3, etc) that reading forums is like greek!
From my understanding, I know I can't get the DD TrueHD (or DTS-MA) to work via HDMI. However, I THOUGHT I could at least have PowerDVD "convert" (is the proper word downsample?) the DD TrueHD to a 5.1 Multichannel audio.
Am I completely wrong? Is what I want even possible?
Has any of you ever experienced this problem before, i set the DVD and bluRay drives to be associated with powerDVD however i have the following issue:Works:- If i insert the DVD/BluRay then powerDVD automatically launches - If i right click on the DVD/BluRay then i can select "Play with powerDVD" DOESNT work.If i try double clicking on the DVD/BluRay drives.If i right click on the drives and press play When i say it doesnt work i mean windows throws up an error saying: "This file does not have an associated program for performing this action. Please install a program.I know for a fact that i HAVE associated the drives with powerDVD yet it still complains If anyone have any idea how i can resolve this i would be very grateful
View 7 Replies View Relatedi am looking for a Blu-Ray ripper software that converts to MP4 with nice quality that converts under 2GB and 1080p, i know that this will not be true HD. My question is does anybody know what kind of software i would use that converts this under 2GB with nice quality? I have tons of Blu-ray movies and i want to convert them under 2GB to save space on my hard drive, also can a person make back-up copys of his/her own collection?
View 10 Replies View RelatedI built a tiny yet powerful HTPC with the new sandybridge Intel i3 CPU. is there some kind of software that will turn off the spinning HD when it is not needed and only turn on if say a tv recording is scheduled for a certain time, record the show, and then turn the hd off again. it runs windows 7 64 bit, 8 gigs of ram, 2tb hd, blu ray burner.
View 3 Replies View RelatedI tried searching first but I seem to have trouble finding the proper terms to narrow the search enough... So I just post this.I put together a HTPC for 24/7 usage (windows media center and iMON remote control, spotify, PowerDVD for Blu-Ray movies). Minimal amount of additional software installed. The problem is it locks up often. The whole Windows 7 goes fully unresponsive (all you can do is power off -> on). It rarely stays responsive for 48 hours. No crash dump is generated. The event log shows nothing special, mainly two error items, one related with errors on Microsoft Security Essentials and the other is Circular Kernel Context Logger session failing to start.The main question is: what is there to do, is there a program that could monitor which other program seems to halt the system? I'd hate to go through eliminating each and every software/hardware component... The second question is: just in case, does anything below ring any bells what might cause the problem?
[code]...
Currently I'm using the Logitech K400 wireless keyboard with a built in trackpad, but for my next system build I won't be using it because of finicky reception. I'm currently looking for alternatives, and I want your advice. Currently I'm considering one of these: IOGEAR GKM561R Black 2.4GHz Wireless HTPC Multimedia Keyboard with Laser Trackball and Scroll Wheel IOGEAR GKM561R Black 2.4GHz Wireless HTPC Multimedia Keyboard with Laser Trackball and Scroll Wheel. (They seem to be identical but Newegg lists them separately).
View 7 Replies View RelatedI am using a very cheap receiver from Amazon with the PC Remote Control drivers provided by Eventghost. From my other readings the best way to identify the remote is the presence of [URL] in the GUID. My problem is this. When I put the computer to sleep and begin watching another source, the commands from the television remote are detected by the IR receiver and wake the PC. Is there any way to select which signals would wake the computer?I currently have the power management settings configured to not allow the IR receiver to wake the computer and use the power button to wake it?
View 2 Replies View Relatedhere's the system specs;
ECS H67H2-M black
Intel i3-2100
4GB (2x2GB)DDR3 1333MHz Twinmos 9-9-9-24
2TB Samsung HD204UI HDD - OS, media and files
Thermaltake Toughpower 600W PSU
Lite-on DVD+/-RW
Windows 7 x64 Ultimate
I'm having a whole store of BSOD's but the really bugger is the part where i can't shutdpwn the rig completely. If i press shutdown via start in win7 the rig shuts down fine and dandy...but give it 3 secs and it powerback up again..
Asrock e6 z77 board, uninstalled and reinstalled latest drivers for gigabyte 6870 but Windows 7 64x spits a colada-scope of colors and crashes severely sometimes with blu screen the moment I press play, plays standard blurays fine. If I switch to onboard no problems. 750 psu, i73770k, 16G ram LG bddvdrw.
View 4 Replies View RelatedI have a Gateway laptop with Windows 7 and a disc-drive that used to play Blu-Ray. Now it says "No disc in Drive D" when I insert a Blu-Ray disc. Regular movies play fine. I updated to Cyberlink 11 and also downloded the patch.
View 6 Replies View RelatedI am experiencing a unique issue with my WMC HTPC box. Anytime I watch content from either WMC7 or WMP7 I get audio and video stuttering every minute. Sometimes, the stuttering will cause the box to freeze up, forcing a restart. At no time do I receive memory warnings prior to or after each event. I've tried restarting the computer in the hopes of clearing the RAM, clearing the Temp Files, and running ChkDsk (at the time of this posting, the process has taken over 1 hour to complete - not sure if this is normal). I also installed Process Explorer to see if the issue was memory related. While it appears that WMC is hogging up to 3/4 of my RAM at some points, usage is mostly confined between 1.3-1.7 GB.
The spikes occur regardless of the RAM usage but not when WMC is running idle (meaning ON but not displaying content other than the main menu). Process Explorer appears to show that the issue is possibly related to SVCHOST - when I place my mouse over each spike, it displays SVCHOST but not the programs which that particular version of HOST is running. I am running WMC7 64-bit, with two 500GB drives (one mirrored), a third drive (2TB internal) for video and music, 4GB of RAM, an Intel i3, a Hauppauge 1850 Dual Tuner, and a ASUS P7H55-M PRO motherboard. I will update with ChkDsk info when it finishes.
I've recently started to experience a BSOD problem I cannot quite put my finger on. It does not save a log, even though I have it set to save in /Minidump. I have not changed or added any hardware, or software. I completely wiped Windows and started over from scratch, using the most up to date drivers. However they're still occurring, I've restored my BIOS settings to all default settings. I am thinking it was a Hard drive issues, I've ran CHKDSK all both drives - I know my Windows drive was clean, I was not around to see the completion of of my slave drive - I was running CHKDSK via Safemode and came back to a BSOD. I've attached a administrator Eventlog, but am unable to make much sense of it.
The last BSOD I saw read this;
Code: KERNEL_DATA_INAPGE_ERROR
*
*
STOP: 0X0000007A (0XFFFFFF6FC4000099C0, 0XFFFFFFFFC000000E, 0X00000001E7588860, 0XFFFFF88001338890)
NTFS.SYS - Address FFFFF88001338890 base at FFFFF880012450000, Datestamp 4ce792f9 I've ran Memory test already, no errors where found. The next step I am going to try is too unplug my Slave drive and see what happens without it. I've already re-seated both drives and memory sticks.
I have just set up an HTPC and would like to partition the drive so that I have a small drive of, say 32gb for OS and the rest for storage. According to the system (after fist shrink) the c drive is 204gb free of 295gb, but I can't shrink it further. I've done a disc clean up and emptied the recycle bin. What can I do to shrink this to a minimum?
View 9 Replies View RelatedMy home built HTPC is based on Asus M2n-SLI mobo and ATI Radeon HD 5450 video card with HDMI out to Onkyo 7.1 receiver which passes video and audio via HDMI to Olevia 36 inch LCD TV. PC (ATI card)-- HDMI out --> stereo receiver -- HDMI out --> TV The HTPC is never turned off. When I turn on the receiver and TV components to watch TV, Win 7 (Home Premium, 64 bit) will mute the system. I cannot just unmute. I have to go into Control Panel > Sound. There I find only one option (expected): AMD HDMI output.When I right click and choose Test option, it works just fine. I make no changes to the configuration and the sound/speaker icon in the system tray is normal. Then I open Media Center and everything works fine. When I'm done watching TV, I turn off the receiver and TV. When I start another session, the problem is back.I did not have this problem with an older receiver but using completely different component connections. PC -- HDMI out --> TV -- audio out --> old stereo receiver.
View 2 Replies View RelatedConfirmed by Mr. Sinofsky himself, there will be no native BluRay support in Windows 7. However, BluRay Drive makers and OEMs will be able to extend Windows Media Center to support playback. What will be supported in Windows 7 though, is the burning of BRD discs.
Here’s the email that was forwarded to me from our loyal reader Theodore. I did make a WHOIS check to make sure that it was Sinofsky himself. Location was indeed from: United States Redmond Microsoft Corp.
Basically whenever i try to use windows media center to play a bluray disk, it automatically quits out of wmc and launched powerDVD, which is jarring and feels like a cheap hack.
is there any way to get bluray disks to lay inside wmc?
how can i watch downloaded bluray movies on my computer
View 1 Replies View Relatedhow can i play blu-ray disc in my laptop (windows 7) ,i don't had software.
View 1 Replies View Related