Currently I'm using the Logitech K400 wireless keyboard with a built in trackpad, but for my next system build I won't be using it because of finicky reception. I'm currently looking for alternatives, and I want your advice. Currently I'm considering one of these: IOGEAR GKM561R Black 2.4GHz Wireless HTPC Multimedia Keyboard with Laser Trackball and Scroll Wheel IOGEAR GKM561R Black 2.4GHz Wireless HTPC Multimedia Keyboard with Laser Trackball and Scroll Wheel. (They seem to be identical but Newegg lists them separately).
Anybody know a native keyboard shortcut that will hide/unhide the Navigation Pane in Explorer? Something like how Alt + P works to hide/unhide the Preview Pane?I have a netbook and sometimes I need more horizontal space so its nice to hide the navigation pane temporarily.
After long Google searching, i haven't found a way to disable my Sony Vaio VPC series built-in keyboard (tea spilled on the keys, got a wireless external keyboard but some keys keep getting stuck and i would like to be able to disable the built-in keyboard).
First let me say, I have purchased a copy of Win 7 Ultimate upgrade from my university. I am NOT, repeat NOT, asking about pirated software. I am asking about a copy of Windows Ultimate 7 Upgrade.I have had issues recently with my system. After a whole lot of BSODs and reinstallations, I have isolated the problem and subsequently relegated that computer to being a home theater PC. During the setup, I was installing Windows. When I put in the key, it rejected it. I input it about 10 times, each time verifying it, and it kept rejecting it. I have installed this copy several times before, and had no problems previously. This is a fresh install, and the installation went smoothly up until that point. I did let it sit for about an hour during the installation. It sat at the point where you put in the username/password and then the windows key.
I built a HTPC with a video card that does DVI and hdmi. The motherboard has a VGA.
But I also need either: s-video or composite What should I do? I don't want to like "downgrade" the video card and just use an old one for everything. Can I run them both? Like switch back and forth? "Simultaneous" is not required.
Also, I would already be using the PCIE 2.0x16 for the video card. I have PCIEx1 and PCI slots open. EDIT: I found this... [URL]
Would this work in letting me switch between the onboard video and the video card?
Basically I know virtually NOTHING about video cards. Last time I got one it refused to work in my computer (an Old Dell).Basically I want to be able to decode 1080p (and do re-encoding, not necessarily 1080p) without my computer bogging down. And I want to stream to my Xbox with subtitles, which my G620 simply CANNOT do (as it requires burning in subtitles on the fly before streaming it to the xbox).I don't want a super expensive GPU, but it needs to be low-profile to fit my case (info in hardware description)
I *think* I've managed to figure out that an AMD Radeon HD 6850/70 will work for playing 3D Blu-Rays with TotalMedia Theatre 5, onto a Samsung 6000 series 3D TV with Active Shutter glasses over HDMI 1.4a.
I am currently building an htpc that will be used solely for watching movies from my hard drive, blu ray discs, and online streaming. I am trying to find an hd media player that is very light and simple. I have tried KMPlayer but it seemed to open fairly slow on my current computer, which isn't slow. I have also tried splash lite which I really like, but on some of the movie files it does not play sound, so no go there. Any other suggestions about what software would be the best? It doesn't need to be powerful because I will just be watching movies, I mostly want it to open fast and and have a small footprint.
got myself a little pc that im using as a HTPC... I initially purchased a DisplayPort to HDMI cable to connect the htpc to the pioneer amp and then to the tv the video signal works perfectly, but i couldn't get any sound coming through, so then i tried adding a audio jack from the htpc to the amp, still no luck...i have test the sound from the htpc and the sound come out from there, but when connect to either the amp or tv, via the audio jack it doesnt work HP Compaq 8200 Elite Ultra-slim PC specifications - HP Small & Medium Business products?
Some time ago i put together a HTPC with a Asrock A75M-HVS mtherboard (VIA VT1705 Audio Codec) hooked up to my tv with HDMI(sound+video), installed windows and installed on the drivers from Asrocks website.Today i was thinking that I had probably installed the audio drivers over the windows drivers and i wanted to make sure i had the latests drivers from VIA, i was looking around how i could stop windows from installing audio drivers, i found a method using gpedit.msc wich seemed to work, it blocked windows from installing its own driver.So I downloaded the latest driver from VIA website (this was a newer version then from asrock's website). I think it installed correctly but the only thing that showed under playback devices was "Speakers", the digital hdmi output had dissapeared.I tought this was a problem with the driver so i download the one from Asrock thinking this one has to work, but the same problem.This had taken several hours of messing around so i tought screw it, ill take the windows drivers, so I let windows install and it seems to work and i got my sound back, under playback devices there are now 2 options again "speakers" and "digital audio hdmi". I get sound using the digital audio output, but only stereo, when i click the configure option it doesnt let me pick 5.1.I dont really care anymore what driver I have, I would just like to have my 5.1 back,
I built a tiny yet powerful HTPC with the new sandybridge Intel i3 CPU. is there some kind of software that will turn off the spinning HD when it is not needed and only turn on if say a tv recording is scheduled for a certain time, record the show, and then turn the hd off again. it runs windows 7 64 bit, 8 gigs of ram, 2tb hd, blu ray burner.
I tried searching first but I seem to have trouble finding the proper terms to narrow the search enough... So I just post this.I put together a HTPC for 24/7 usage (windows media center and iMON remote control, spotify, PowerDVD for Blu-Ray movies). Minimal amount of additional software installed. The problem is it locks up often. The whole Windows 7 goes fully unresponsive (all you can do is power off -> on). It rarely stays responsive for 48 hours. No crash dump is generated. The event log shows nothing special, mainly two error items, one related with errors on Microsoft Security Essentials and the other is Circular Kernel Context Logger session failing to start.The main question is: what is there to do, is there a program that could monitor which other program seems to halt the system? I'd hate to go through eliminating each and every software/hardware component... The second question is: just in case, does anything below ring any bells what might cause the problem?
I am using a very cheap receiver from Amazon with the PC Remote Control drivers provided by Eventghost. From my other readings the best way to identify the remote is the presence of [URL] in the GUID. My problem is this. When I put the computer to sleep and begin watching another source, the commands from the television remote are detected by the IR receiver and wake the PC. Is there any way to select which signals would wake the computer?I currently have the power management settings configured to not allow the IR receiver to wake the computer and use the power button to wake it?
I'm thinking about building a new main PC and hooking my current one up to my receiver and plasma tv (50" Pioneer Kuro 720p). If I put a BluRay player in the new PC, will I be able to display it on the tv over the network or does the BluRay player need to be in the HTPC? My current machine's mobo is IDE, not SATA, so I assume that would limit my options on a BD drive.
ECS H67H2-M black Intel i3-2100 4GB (2x2GB)DDR3 1333MHz Twinmos 9-9-9-24 2TB Samsung HD204UI HDD - OS, media and files Thermaltake Toughpower 600W PSU Lite-on DVD+/-RW Windows 7 x64 Ultimate
I'm having a whole store of BSOD's but the really bugger is the part where i can't shutdpwn the rig completely. If i press shutdown via start in win7 the rig shuts down fine and dandy...but give it 3 secs and it powerback up again..
I am experiencing a unique issue with my WMC HTPC box. Anytime I watch content from either WMC7 or WMP7 I get audio and video stuttering every minute. Sometimes, the stuttering will cause the box to freeze up, forcing a restart. At no time do I receive memory warnings prior to or after each event. I've tried restarting the computer in the hopes of clearing the RAM, clearing the Temp Files, and running ChkDsk (at the time of this posting, the process has taken over 1 hour to complete - not sure if this is normal). I also installed Process Explorer to see if the issue was memory related. While it appears that WMC is hogging up to 3/4 of my RAM at some points, usage is mostly confined between 1.3-1.7 GB.
The spikes occur regardless of the RAM usage but not when WMC is running idle (meaning ON but not displaying content other than the main menu). Process Explorer appears to show that the issue is possibly related to SVCHOST - when I place my mouse over each spike, it displays SVCHOST but not the programs which that particular version of HOST is running. I am running WMC7 64-bit, with two 500GB drives (one mirrored), a third drive (2TB internal) for video and music, 4GB of RAM, an Intel i3, a Hauppauge 1850 Dual Tuner, and a ASUS P7H55-M PRO motherboard. I will update with ChkDsk info when it finishes.
I've recently started to experience a BSOD problem I cannot quite put my finger on. It does not save a log, even though I have it set to save in /Minidump. I have not changed or added any hardware, or software. I completely wiped Windows and started over from scratch, using the most up to date drivers. However they're still occurring, I've restored my BIOS settings to all default settings. I am thinking it was a Hard drive issues, I've ran CHKDSK all both drives - I know my Windows drive was clean, I was not around to see the completion of of my slave drive - I was running CHKDSK via Safemode and came back to a BSOD. I've attached a administrator Eventlog, but am unable to make much sense of it.
NTFS.SYS - Address FFFFF88001338890 base at FFFFF880012450000, Datestamp 4ce792f9 I've ran Memory test already, no errors where found. The next step I am going to try is too unplug my Slave drive and see what happens without it. I've already re-seated both drives and memory sticks.
I have just set up an HTPC and would like to partition the drive so that I have a small drive of, say 32gb for OS and the rest for storage. According to the system (after fist shrink) the c drive is 204gb free of 295gb, but I can't shrink it further. I've done a disc clean up and emptied the recycle bin. What can I do to shrink this to a minimum?
My home built HTPC is based on Asus M2n-SLI mobo and ATI Radeon HD 5450 video card with HDMI out to Onkyo 7.1 receiver which passes video and audio via HDMI to Olevia 36 inch LCD TV. PC (ATI card)-- HDMI out --> stereo receiver -- HDMI out --> TV The HTPC is never turned off. When I turn on the receiver and TV components to watch TV, Win 7 (Home Premium, 64 bit) will mute the system. I cannot just unmute. I have to go into Control Panel > Sound. There I find only one option (expected): AMD HDMI output.When I right click and choose Test option, it works just fine. I make no changes to the configuration and the sound/speaker icon in the system tray is normal. Then I open Media Center and everything works fine. When I'm done watching TV, I turn off the receiver and TV. When I start another session, the problem is back.I did not have this problem with an older receiver but using completely different component connections. PC -- HDMI out --> TV -- audio out --> old stereo receiver.
I have recently purchased all the parts for a computer from Newegg (still waiting for it), with the understanding that the HD graphics capabilities of the Sandy bridge Pentiums will be more than capable of playing back most formats flawlessly (and being able to convert some odd formats to WMC-friendly versions ahead of time), alongside beng used as a sort of download server for the house.
I am copying files from a WHS 2003 to a back-up drive on a HTPC. The WHS and the HTPC are connected physically to a router. The back-up drive is USB 3.0 and plugged into a 3.0 USB input on the HTPC.
The transfer rate is only 40MB/second. Why is this? The data is being transferred via CAT6 cables from the WHS/Router/HTPC and then USB 3.0 to the external drive
I am having some problem, i get often when i want to save or open a file my explorer navigation plane does not appear at the window. Usually i scroll themwith button shortcuts.like this (explorer fine,but for open/save navigation pane vanishes)
I am going to build a new system. It will have a 120gb ssd and 1tb hdd.I usually use the computer for various graphic programs and gaming. Until now i used to have only hdds on my systems, I used to partition them usually like this: c:windows d:various program files and user folder e:graphic programs and their scratch f:games g:storage (projects, videos, pictures, etc).i have decided to get an ssd drive now because I understand that it boosts the overall performance of the system. All the other information that I read about ssd was either irrelevant or too complicated to understand.I am looking for an advise on my new build. Obviously I will use the new hdd for storage but about what I should do with the ssd I am not entirely sure.First of all, should I make partitions on it or this will affect the performance?Second, except for the win system files what should I put on it? Will graphic programs or games benefit from that or should I install them on the hdd? I also read that I should put the temp folders on the hdd for brtter performance is it correct?
I recently upgraded a client's computing site installation. 4 Desktops, software (XP/MS Office 2003 to W7/MS Office 2010) and one MFD. To save some time and make the transition smoother (and attempt to iron out any unforseeables) I set the 4 new workstations up at home - at cat5 hardwired through a TP Link Router under a Workgroup, with each workstation named WORKSTATION01, 02,03 and 04, with file sharing via the workgroup, appropriate advanced sharing center settings and routing via DHCP (dynamic IPs). The network worked flawlessly at home for two weeks, whilst I installed the inevitable updates and made sure when I installed at the site, everything was as up to date as possible and any issues ironed out.However, the client started loosing the ability to navigate to another WORKSTATION via MS Explorer typically, it would happen in the afternoon. Some days, it wouldn't happen at all.BUT! WORKSTATION01 never looses Workgroup visibility in MS Explorer only the other 3 do - and not all at one time always.I've compared all settings on WORKSTATION01 with the other (offending) 3 and they are the same.
All work stations peer at the same level - there is no (higher) server as such. Although WORKSTATION01 has the clients accounting software data file on it and important documents are stored under a SERVER folder which is resident on WORKSTATION01's hard drive.The "visibilities" are always fine when they boot the machines up in the morning. If a device looses the MS Explorer visibility to the Workgroup (under Network) - sometimes rebooting the device restores it, some times it doesn't.They don't loose the MS Explorer visibility if they leave a session(dialogue) permanently open - but they shouldn't have to to that.I've set up a desktop folder with inter-workstation short cuts as a work around and they always work. Other Considerations:
1) SOFTWARE - running Windows Defender with Firewall On and Avast.
2) FIREWALLS ON/OFF - I've read a lot of threads - the jury seems out on this - some advocate turniong them off, others fervently announce this should NEVER be done - use the right settings!
3) DHCP vs STATIC IPs - again, plently of dispute on this as to whether DHCP or static IPs should be used for device routing.
