I just swapped out my 560 ti for an identical model (on warranty). Now GTA-SA won't launch. I've tried a full delete/reinstall of GTA to no avail. I also updated the GPU's drivers.In HW Manager, I have 2 exclamations:
-Video Controller
-USB Controller
The game worked fine with the last gpu (until that gpu developed a noisy fan).
Specs:
Win7 64
8gb ram
i5 2500k
my dmw is crashing sometimes, mostly when i watch Internet or other videos online... i get this error or the pc freezes and i need to restart or logoff to get it to work: [code] if the online privacy statement is not available, please read our privacy statement offline:c:windowssystem32en-userofflps.txt.
View 2 Replies View RelatedI've got a laptop with windows home premium 64 bit installed on it and I use it for gaming a lot. It's high spec and there's usually no problem but I've been having problems with guild wars 2.Basically the game crashes a lot. When it crashes, I end the application in task manager but if you go to the processes tab the process is still there and clicking end process or end process tree doesn't close it down. The game won't restart while this is hanging so I have to reboot the laptop. It's getting very annoying and is happening a couple of times a day. Does anyone know how to fix the problem? Is there a way to kill processes quickly or does anyone know what I can do to stop the crashes full stop?I've tried opening task manager and closing the application then closing down the process which doesn't work. I tried ending the process first before ending the application but that still closes down the application and leaves the process hanging. I've tried to end the process in the cmd line but it still leaves the process hanging or if I do it before ending the application it just closes the application and leaves the process hanging.
View 4 Replies View RelatedIt started less then a month ago and I can't figure out what is causing the issue. I've looked over Event Viewer, but can't seem to get answers on specifics over the net.
Quote: Event Viewer Issues;
2:02:05 The PnkBstrB service entered the stopped state. EventSourceName="Service Control Manager"
EventID Qualifiers="16384">7036</EventID
Keywords>0x8080000000000000</Keywords
EventRecordID>261885</EventRecordID
[code]......
So I have been having troubles with my games recently I have no idea why it is happening but every time I try starting up my games such as Star Wars titles because they are on sale on steam so I picked them up, for Star Wars Battlefront 2 I get to the main menu pick new game and then it says play training I select it and it goes black and takes me to my desktop and there is no error message displayed, and for Star Wars Empire at War it gets passed the game logo's lucas arts ect.. and then it goes black and again no error message
View 1 Replies View RelatedSuddenly my laptop is crashing. Blue screen comes up with this error 0-0000007e. Tried a restore point but did not Work. I haven't installed anything new. Toshiba about 3 1/2 years old. Nothing special happened before.
View 1 Replies View RelatedMy laptop is almost unusable because firefox, explorer and chrome are constantly crashing. I don't know a lot about computers but have been trying to figure out what is causing the crashes. I tried uninstalling my antivirus avg and it did not help. I also uninstalled chrome and firefox and then added them back with no change. I checked my event logs and found dns client 1012 errors but did not know if that has anything to do with the browsers crashing.
View 1 Replies View RelatedMy brand new computer I just built is crashing and restarting without a reason I can find. My System health report won't be very accurate because I need to run OCCT stress test in the background to slow down the amount of times it crashes.
I have run memtest for 12 hours - No errors.
My CPU is cooled by a H100 - temps never go above 40c even under load.
CPU - i5 - 2500k
MOBO - Gigabyte GA-Z68X-UD3H-B3
PSU - Antec 750w
Even on a fresh install it will crash during the setup phase, like where you put in product code and username. Leading me to think its a Hardware issue.
Alright so recently Burnout Paradise has been crashing to the desktop without displaying any kind of error message. I can load the game, select a vehicle, and get in game just fine but the game will crash after a random amount of time. My system specs shouldn't be a problem at all, but you can check them out. Here's what Windows says about the crash[CODE]
View 3 Replies View RelatedSo about a week ago, I was just playing a flash game when my screen appeared to freeze, upon unfreezing Windows Aero stopped working(the transparency on the task bar disappeared). There was no error, it just stopped working. After looking around my computer it told me that Aero wasn't supported, which did not make sense considering it was just supported.So I did a system restore(it was made after a windows update) and it started working again. It worked fine for a few days and just today it did the exact same thing. Of course, I resolved this issue with a system restore as previously, but I would like to find out what the problem is exactly to fix it, since my current solution is just going to be an annoyance.
View 4 Replies View RelatedI bought my New PC under 2 months ago, and now it has this super annoying problem, that i don't know hot to fix.it has the same effect like the windows key, but it wont show the menu. it happens every 3 - 10 minutes, and it's a pain in the ass while playing. after 10 - 30 minutes after this happens, mouse and keyboard wont respond anymore.
View 12 Replies View RelatedI have a problem thaI am hoping someone has a solution to. I had previously installed Windows 7 RC on my computer. I then installed a SATA RAID PCI card and also installed a second HD. I attempted to install Vista on the second HD, but had problems and uninstalled it. When I try to boot up the boot up screen gives me the option of Windows 7 or setup. If I choose Windows 7, there is no problem. If I do not choose and the boot up continues in the setup mode I get an error message on the blue screen of death.
The computer shuts the start up in order to preserve the computer. It instructs me to remove the PCI card and HD and reinstall them. I have done that. I undertand that the boot up files fromVista are still on the the HD in a hidden folder. How do I correct this situation? Can I re-install Vista on the second HD and achieve the desired result? I formatted the second HD after the blue screen, but should I use a drive scrubber and remove all traces? If you know or believe you have an answer, I hope to hear from you.
I got Windows 7 ultimate 64bit from microsoft technet. Everything is working fine except for the USB ports in the back of my computer, when i go to device manager I get the error: Code 43Windows has stopped this device because it has reported problems. (Code 43), I have tried the drivers for my motherboard from the Gigabyte site, the ones for Vista 64bit, but no luck,
View 9 Replies View RelatedI am using VZAccess Manager with a Novatel USB760 modem. I recently installed Avast antivirus software and now I get an error 633 every time I try to connect to the internet
View 1 Replies View RelatedI have installed Football Manager 2009 and when I run it the game said that there wasn't a dll. So I have search on internet and i have found how to solve this problem.. but now the game doesn't says that there isn't the dll but just that there is an error and ask me if i want to send the error to Microsoft. How can I do?
View 3 Replies View RelatedSomehow I messed up install of a PCI wireless adapter. Device Manager says 'device not working properly because it can't load drivers: code 31.
I've pulled the adapter card out. ran the computer awhile without it, reinstalled it and same problem.
Then I did the registry thing about upper and lower filter deletion but the filters are not listed. Yeah I went to the right place in the registry to look.
my computer is upgraded from Vista to 7. I am getting a device manager restricted error.
View 1 Replies View RelatedI've been dealing with this issue for a few weeks now. The message that comes up when I try to open CCC is: "Could not load file or assembly 'CCC.Implementation' or one of its dependencies. The system cannot find the file specified." I've tried everything to fix this. I've followed step by step, about a dozen different guides all over the internet on how to fix this issue, but with no luck. My last resort, today, was to reformat my entire hard drive and do a fresh install of windows 7. I was flabbergasted when I still received the error. I have also tried multiple GPU's, so I know it is not a hardware problem, at least I do not think so. My reason for wanting to open CCC is because I just bought another 4890 for crossfire on Ebay but I can't even enable crossfire to get it working.I should also say that the performance of the single 4890 is perfect, so it is running as it should be[CODE]
View 1 Replies View RelatedIssue with an HP deskjet D4363. It worked just fine when I bought it in November and then just stopped.At first it would print 3 or 4 lines and then freeze. Now it does nothing and isn't even recognised by windows as a printer.I have a code 43 error unrecognised device in my device manager under usb.
View 1 Replies View RelatedI am trying to install Win 7 Ultimate x64 on my roommates laptop. It was having severe issues booting into 7 already so I decided to just wipe it and re-install. I started with a DVD copy and upon boot he realized that his DVD drive was broke. FML. But we can boot from USB so I go buy a large flashdrive and DL a copy of Windows 7 and make it boot-able. So I plug it in and when it starts to load windows files it makes it about 10% and stops.
Then throws an error 0xc00000e9. "An unexpected I/O error has occurred".
Now I know my USB is good, I just bought it. The DVD Drive is messed up but its not being used in any way. It's an older Sony vaio, Core 2 Duo, 2gb ram, the model is burnt off the bottom.
An error message has been bugging my lately, rather since I started using programs which use the remote access connection manager. One of them is songbird (the fire-foxy media player) which cannot listen to shared music, and SecondLife which uses it to make http calls, both of which make up pretty major parts of my day to day.
The actual error reads: "Network Connections
Cannot load the remote access connection manager service.
Error 711: the operation could not finish because it could not start the remote access connection manager service in time. Please try the operation again."
I found this weblink on microsoft support which explains that windows is stupid and I should load the following dependent services manually.
Telephony
Remote Access Connection Manager
Remote Access Auto Connection Manager
Telephony on my computer is already running, the Remote Access Auto Connection Manager depends on Remote Access Connection Manager, when I try to start the Remote Access Connection Manager service I get the error message: "Services Windows could not start the remote access connection manager service on local computer.
Error 1068: The dependancy Service or group failed to start."
The Remote Access Connection Manager depends on Telephony (already running) and Secure Socket Tunneling Protocol Service. When I try to manually start the Secure Socket Tunneling Protocol Service I get the following informative message: "Services
The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
First I want to say that the drive works without problems at the correct speed. The problems come upon disconnect. I also want to to stress that USB 2.0 discs are working flawlessly. If I use safe eject and the look in the device manager I get an error 47 saying that it has been shut down but not disconnected, it also says I can rectify it by disconnecting and reconnecting but this does not work. If I do so the drive will not be recognized. The enclosure has a power switch. After a safe eject I have tried both pulling the USB cable while power is still on and also going the other way by first shutting the power down. In both cases the error 47 shows in device manager. When this happens the CPU load goes up to about 20% and stays that way when it before was around 0 at idle. If I reboot the drive reconnects and I have no problem with it unless I try to safely eject it again.
View 2 Replies View RelatedI clicked on Device Manager > Other Devices > Mass Storage Controller. Under Device Status it said, "The drivers for this device are not installed. (Code 28)."
I don't know what device they are talking about. All the storage devices on my PC seem to be working. Why does DM think there is a Mass Storage Controller at location PCI bus 7, device 1, function 2? I clicked on Update Drive - search failed to find a driver and suggested none needed. I clicked the Uninstall button and the message dissapeared until I rebooted the system.
Can somone tell me why Windows 7 might think there is a Mass Storage Controller on my PC?
Just wanted to reinstall my Windows 7 this morning due to the fact that my dvd writer did not read of write CDs. After some research I learnt that a re-install will do the trick. how I don't know.My system statrt up, loads the windows 7 files and then comes up with the Windows Boot Manager screen stating that it has problems communicating with a device connected to your computer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred.I have tried my 2 SSD drives in Raid 0 and also a single HDD with the same results.My DVD writer is an IDE model, but I can't think that this is the problem since the first time I used this drive and the same original Windows 7 Ultimate Disc there were no problems.I even went as far and got a PS2 keyboard to avoid any USB devices and also downloaded a full untouched version of Windows 7 with the same error! (Maybe my disc got scrtaches after its first use, I don't know)
View 3 Replies View RelatedBootmgr is missing and I've tried every way but reinstalling. I want to reinstall but when it says expanding files it stays on 0 for 30 mins then a error message comes up and I can't reinstall.
View 9 Replies View RelatedWell first of all I started up my PC and it immediately jumped into Startup Repair maybe cause I didn't shut it down properly. It went through the repair and several times. By then I knew something was wrong, I checked the Diagnostics and see what Startup Repair had actually done. It turns out it could not fix an error with the OS Loader.It came up with two error code (0x2) and (0x490).I followed the following instructions:
1. bcdedit /export C:BCD_Backup
2. C:
3. cd Boot
4. attrib bcd -s -h -r
5. ren C:BootBCD BCD.old
6. bootrec /RebuildBCD
I also tried using /FixMBR and /FixBoot However none of these worked and my I tried booting up it came up with the same problem. I went back into the Windows 7 DVD and ran Startup Repair again. It said it was completed successfully but it said also if it doesn't boot then there's something wrong.Which leads to my new error screen that never goes away everytime I switch on the PC. The error message is as follows:A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.If you have a Windows installation disc, insert the disc and restart your computer. Click "Repair You Computer," and then choose a recovery tool.Otherwise, to start Windows so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver sginature enforcement.
File: WindowsSystem32Winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file.
If I try and press ENTER it will take me to the boot menu and if I press ENTER to select an OS (I only have one) then it will jump back to the previous screen.
such as i wrote in the title i get error 0x80070570 when i try to install Windows 7
this the first time i face this problem because i install Windows 7 many times before on the same computer
the problem start with blue screens when i already have a Windows 7 so such as many people do i backup all my files and format C partition Then when i install Windows 7 i 0x80070570 problem so i format all of my hard disk and again i got this error
i tried alot of Solutions but all of them did not solve the problem
i tried to use system recovery options but it unavailing and it tell me boot Manager is missing or corrupt so i tried many commands like bootsect/nt60 and also no luck
now what can i do to solve this problem , can any one help me please ?
crash dumps error while playing Football Manager 2013?
View 1 Replies View RelatedI have used Windows 7 build 7057. But in that I was having problem that it keeps giving error 711 (cant load Remote Access Service Connection Manager) whose soln provided on net doesnt work as 'secure socket tunneling protocol' service starts and stops automatically and other services are dependent on it. So the only soln is to reinstall windows. So I switched to XP again and this problem doesnot occur in it.
Now I wasnt to ask that was that some build related problem or other coz i want to install Windows 7 RC now. If anyone have soln to that problem than plz provide it.
Twice in the last week the computer has locked up and required me to reset it whilst playing Football Manager 2012. There is actually no BSoD shown the game just freezes up completely until I press the reset button. I can't remember any BSoD before when using Windows 7.Most of the computer is 3-4 years old, and I can't remember when I installed Windows 7 Home Premium 64 bit on it probably over 18 months ago when I got a new Graphics Card. The only new hardware in the last few months is a new Razer mouse to replace a faulty ROCCAT mouse, nothing else has changed. Temperatures don't seem to be a big problem and Memtest didn't find any problems, but I haven't had time to run Memtest for more then 3 passes or get inside the case to look at the hardware.
View 1 Replies View RelatedI had a small problem with my laptop a few days back ,but it was fixed when I removed and inserted the battery. But the F drive was renamed to D drive automatically. I think this was the cause of the following errors, which i noticed when I tried to use my Reliance Netconnect+ datacard and Error 711 (Cannot load the Remote Access Connection Manager Service) showed up.I tried system restore but i noticed it was disabled and so there were no restore points.A little research showed that Now I have the following errors: I cannot start Remote Access Connection Manager (Error 2:Cannot find the specified file) and cant start Remote Access Auto Connection Manager (Error 1068: The dependency or group failed to start). Both services are set to manual.(Target file is svchost.exe -k netsvcs).
View 2 Replies View Related