I had a small problem with my laptop a few days back ,but it was fixed when I removed and inserted the battery. But the F drive was renamed to D drive automatically. I think this was the cause of the following errors, which i noticed when I tried to use my Reliance Netconnect+ datacard and Error 711 (Cannot load the Remote Access Connection Manager Service) showed up.I tried system restore but i noticed it was disabled and so there were no restore points.A little research showed that Now I have the following errors: I cannot start Remote Access Connection Manager (Error 2:Cannot find the specified file) and cant start Remote Access Auto Connection Manager (Error 1068: The dependency or group failed to start). Both services are set to manual.(Target file is svchost.exe -k netsvcs).
An error message has been bugging my lately, rather since I started using programs which use the remote access connection manager. One of them is songbird (the fire-foxy media player) which cannot listen to shared music, and SecondLife which uses it to make http calls, both of which make up pretty major parts of my day to day.
The actual error reads: "Network Connections Cannot load the remote access connection manager service. Error 711: the operation could not finish because it could not start the remote access connection manager service in time. Please try the operation again."
I found this weblink on microsoft support which explains that windows is stupid and I should load the following dependent services manually. Telephony Remote Access Connection Manager Remote Access Auto Connection Manager
Telephony on my computer is already running, the Remote Access Auto Connection Manager depends on Remote Access Connection Manager, when I try to start the Remote Access Connection Manager service I get the error message: "Services Windows could not start the remote access connection manager service on local computer. Error 1068: The dependancy Service or group failed to start."
The Remote Access Connection Manager depends on Telephony (already running) and Secure Socket Tunneling Protocol Service. When I try to manually start the Secure Socket Tunneling Protocol Service I get the following informative message: "Services The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
I have used Windows 7 build 7057. But in that I was having problem that it keeps giving error 711 (cant load Remote Access Service Connection Manager) whose soln provided on net doesnt work as 'secure socket tunneling protocol' service starts and stops automatically and other services are dependent on it. So the only soln is to reinstall windows. So I switched to XP again and this problem doesnot occur in it.
Now I wasnt to ask that was that some build related problem or other coz i want to install Windows 7 RC now. If anyone have soln to that problem than plz provide it.
I am trying to use my remote desktop connection on my computer to another computer in my home I am using windows 7 but when I try to connect it looks for a password which I have not got where can I find a password
I can remote desktop from PC1 to PC2, however I cannot remote desktop from PC2 to PC1? I turned off Windows Firewall on PC1 and PC2 still couldn't remote desktop PC1. The ports are forwarded on both PCs.
I'm having some trouble with remote desktop connection. I have successfully configured my desktop to remotely access it. But every time I start up remote desktop connection it prompts me to "Save File As ... *.xps". The application is driven by the mstsc.exe process, so it starts up when I start my remote session. If I try to save it, it immediately prompts me again for the same thing. Also my One Note Application starts up on my client pc (Laptop) and is also triggered by the RDP connection process.
Here is what I have already tried: - Tried to just end the Save As .. Application thru windows task manager, but since it is driven by the mstsc.exe, It also closes the remote session - I Also checked my remote desktop settings on my laptop to check and see if there are any programs listed to start up when I connect, but no progams are set!
Also every once in a while it actually starts up without the prompt and I actually experience a perfect and smooth remote session!
I installed Win 7 and if i try to open my computer of click on desktop and open up screen resolution etc. I get "Explorer.exe -Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." I did a search but could not find anything related to this error in Win 7. I have found some others attached to Win XP but have to do with the installation of some software which prevents access to explorer.exe. When I boot in safe mode this issue does not appear...
I have a Sony Vaio Z VPCZ128 GG laptop with windows 7 professional preinstalled. I use a 3G usb modem to connect. Everything worked fine until a few weeks ago. Now when I try to open any dialup connection I get the error: Cannot load the remote access connection manager service. Error 711: the operation could not finish because it could not start the remote access connection manager service in time. Please try the operation again. See attached image. My services are as follows:
1. Remote access connection manager. Not started
2. Secure socket tunneling protocol service. Started
3. Telephony. Started When I try to start the Remote access connection manager, I get the error: Windows could not start the Remote access connection manager service on local computer. Error 2: The system cannot find the file specified. See attached image. Is there any way to solve the problem without having to reinstall or upgrade windows?
an error "the system cannot find the file specified" occured when i was trying to run a setup.exe to setup the microsoft expression4,a microsoft package i 've searched some forums but i haven't resolved it yet....
i use Windows 7 ultimate 32bit, i can't access to C: or D:everything else works perfect (like exe files,regedit,run etc)i can get inside C: or D: via "right click + open" , but when i double click i get error called;"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel."Tried complete scan with nod32+malwarebytes+spybot , no virus/worm/spy anything..
I am running Windows 7 64 bit home. I have a program that does not give me a choice as to where it's printout goes. It just sends printout to the default printer. I want the output to go to a file. I used the printer setting feature to set up a FILE printer. As a printer choice I picked generic text and set it up as the default printer. When I send the printout from the program I am asked for a file name. I enter test.prn as the file name. Then I get an error message: Could not open the file. Access is denied.
i have windows 7 64 bit ultimate, i want to run a game i have called sim city 4, when i try to run it i get an error message saying "error: create file access is denied. Any suggestions on how to fix this?
I am installing more RAM in my system, and want to monitor the page file for improvement/reduction in size and use. Other than performance monitor, can I see the page file in either task manager or resource monitor?
When i start up my dell inspiron laptop i am getting error 0xc000000f and I literraly cannot do anything. I have windows 7 in a usb and it showed to repair my bootmgr and when i click next it comes up with an error start options cannot be opened.
I'm trying to install Java 7 & I keep getting this error:installer : wrapper.createfile failed with error 5: access is denied?I have uninstalled all previous versions of Java, tried installing as administrator... Nothing is working.
I am running a lite version of windows 7 32bit in which the dev took off remote desktop. I have looked everywhere but cant find a guide to reinstalling it.
I know there are a myriad of slave drive access issue posts on here. My thing is that I've managed to take ownership of my slave drive; formerly in a tower - now trying to access it thru my windows 7 laptop. Ive taken ownership of " my documents," but it doesn't seem like it took; I still have to take ownership of every folder in it individually when I go into it. Furthermore, when I going into my music or video folders - I get a "file not found" error when I try to open the files.
I normally use remote desktop connection over my home network by simply typing the IP address assigned by the router to the computer I am trying to connect to.Now I am in a hotel in another city. I tried using the ip provided through ipconfig and whatsmyip.com, but I am unable to connect through remote desktop connection.
I'm really having a hard time configuring Remote Desktop Connection.I'm trying to set up a session between my laptop at work(Windows 7 Home Premium) and my PC at home(Windows 7 Ultimate). Now the settings are fine ('Allow Remote Assistance connections to this computer' and 'Allow connections from computers running [CODE]
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.
i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
I have Dell Latitude E6420 which Window 7,IE9. We use F5 Network & Symantec Antivirus in Office.Yesterday I tried to do remote desktop connection of my Off PC. The URL[xxx/itt] i used errors saying " Your device doesnt not comply the client security policies".tell me which version of IE,antivirus with F5 support Window 7 to do remote connection?
I have been trying for a very long time to set up a Remote Desktop Connection to my work server, and am unable to set it up and connect. The network administrator gave me the IP address for the server and I have double checked that it is correct.He told me not to add anything else to the number when I set it up, but Windows Remote Desktop Connection setup wizard says it must have "https://" before the IP number so I put that in.I always get this error: Quote: An error occurred. Contact your workplace administrator for assistance. I thought it might be a Windows Firewall issue, so I went to check if it was allowed. Remote Desktop Connection Windows 7 how to add it because when I clicked to add another program, it was not listed as an option.I read this tutorial Remote Desktop Connection (RDC) - Network and the first photo under "Option Two" in that post shows Advanced System Settings with a section on Remote Desktop.On my computer it only shows the "Remote Assistance" section and does not show "Remote Desktop" at all, and I'm not sure why.My ISP is AT&T. I have DSL with a wireless router. Is it possible that AT&T is blocking the port I need to use? I connect to the server at my office and know my credentials are good, but I don't even get to the point of being able to enter them when I try to set up the Remote Desktop Connection at home.
I can use remote control between 2 of them, but I can not connect from any of those two to the third one. All the services needed for remote control are running, and I have tried several tutorials on how to set up remote control...and nothing. Again, only on third computer remote control does not work. On that computer I have 2 accounts: one standard and one admin. I have put admin account under "Select users" and did not help. Tried with enabled Administrator account and nothing. Below you will see the picture which describes the problem. I can not select who can connect.
