FIX C-Media Drivers (works With Club3D Theatron)
Jun 4, 2009
Just signed up to share this with you all, since you helped me with 7 so much. Normaly I'm such a noob, but I guess I fixed the C-Media chipset problem. It's rather easy. It appears that the HT Omega Striker 7.1 (C-Media chipset) works perfectly with Windows 7 RC. So I downloaded the driver (here HT Omega - Driver Downloads) for my Club3D Theatron DD (also C-Media chipset).
After that I had the Xear3D working. Than I installed the drivers to my own soundcard. Somehow it didn't update the Xear3D program. After assigning the sounds to digital out in the control panel and in Xear3D, I have full working 5.1 out via toslink.
View 2 Replies
ADVERTISEMENT
Apr 19, 2012
This all started earlier today it worked fine yesterday no changes to my computer at all this only happens with avi files cant do system restore I dont use restore points uses too much HDD space
View 4 Replies
View Related
Aug 10, 2009
I am one of the developers of DriverMax. DriverMax is a good driver update application, but until now it only worked for 32-bit versions of Windows. The latest version of DriverMax (5.2) has added support for 64-bit versions of Windows.
View 9 Replies
View Related
Dec 31, 2009
I really need to format my HP Pavilion dv6700 because itsa full of virus, spyware and all that stuff
And i want my brother to try windows 7 as well (its his laptop after all)
[in my desktop pc i have windows 7 and it works fine]
I have already downloaded the drivers for dv6000 BUT i dont know if they will work for the dv6700
ive been lookin around on the hp site but i cant find the drivers for dv6700.
View 3 Replies
View Related
Apr 6, 2009
I am running Windows 7, ver. 7000, on a LG S1 Laptop.
Everything has gone pretty well so far.
But trying to get the drivers and software installed for the direct media buttons hasn't gone so well.
I used the Vista drivers from LG, I had to run them with Vista compatibility. They seemed to run ok, but the buttons don't function any differently and I can't find the service anywhere except in the "programs and features" ie "add remove software"
Anyone have any ideas or had a similar issue?
View 0 Replies
View Related
Aug 22, 2011
Windows 7 is asking me to load drivers through media like usb ,cd/dvd, floppy disks etc.
View 1 Replies
View Related
Apr 27, 2009
I have installed Windows 2003 on my Dell Studio1435 notebook. Internet and Media drivers are not available with me. Please give the siggestion how an get the drivers for the above specificatin.
View 1 Replies
View Related
Sep 16, 2011
I have to install windows 7 on a new hard drive and it keeps asking me for media device drivers. I don't have them. What the next thing I can do!
View 2 Replies
View Related
Dec 2, 2011
I have ran into a new problem with my media player, I tried to play a movie from a tv series and the video plays great but absolutely no sound. I tried music and it won't play either. I did some little research and I keep coming across things about codecs, I don't know what codec I need for windows media 12. I also have divx player and it wont let out a sound either. I'm clueless from this point and also I have updated my drivers for just incase but no luck.
View 1 Replies
View Related
Nov 28, 2012
I have VLC Portable as the default program for opening some video files, like .mp4 and .avi. And I have Foobar (portable) as the default program for .mp3.Usually the icons on .mp4, .avi, .mp3 files get updated with the icons of the assigned media players.But on this PC it's not working. They're still the same icons as if WMP was the default player.Does it have to do with the Standard user account? (Because on other PCs I run from an Admin account and I don't have such problems.)
View 5 Replies
View Related
Dec 22, 2010
How can I make Windows Media Player stop updating media every freaking time I start it up? It always hogs up massive amount of CPU power and goes into (Not Responding) for a min while updating.I only add media files to the Windows Explorer Library so I can get indexed searches. I don't even use WMP to view files or anything. Just to burn some music CDs sometimes.I've tried deleting the files from the WMP library but the next time I open it up, it scans and updates all my files again! Is there a way to completely purge the WMP library and make it not update ever? I've unchecked every option that seems to make it scan and update but it still does it.Basically I want to UNLINK the Windows Explorer Library from the WMP Library.
View 9 Replies
View Related
Jan 18, 2011
How to Change the Default Windows 7 Media Center Media Browser Icon ?
View 0 Replies
View Related
Jul 25, 2011
I'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.
View 9 Replies
View Related
Jan 15, 2009
I have checked two seperate DVD movies and they stop after the splash screens, FBI warning and Corporate logos, and never make it to the DVD menu.
This DVD player is an external player and I have no problem with playback on my Dual boot with Vista Home Premium.
Any suggestions?
View 5 Replies
View Related
May 26, 2012
Windows media player stuck on opening media
View 1 Replies
View Related
Dec 20, 2009
I can't get eithe WMP or MC to play a DVD. I've set the region code. WMP acts like it will play, but then just goes blank, and MC says it cannot play the DVD. These are original discs, not burned copies. I have a custom built system, with 2 graphics cards (GTX 260 and a GT 220) 6 GB of RAM, and an i7 processor. Any help would be greatly appreciated.
View 7 Replies
View Related
Nov 22, 2011
I'm trying to get some videos and pictures off my backup DVDR disk, but for some reason when I tried to restore them on my computer I always get this message:The media in the drive is not the requested media.Please insert the media with the following label into F:Name-PC 1/5/2011 10:49 AM Drive 1
View 2 Replies
View Related
Oct 29, 2012
I wanted to ask if it is possible to set Windows media player to open as the default player inside media center.The reason that I ask this is that I find media center sound is very low quality. I am using it inside windows 7 ultimate X64. I also use Media Browser and have set it to use media player as an external player but it loses some functionality after something is played I have to restart media center and media Browser to play anything again because it will go back to menus but not play anything untill
View 1 Replies
View Related
Jul 9, 2012
What are the major differences betwwen the two? Why would one choose to use WM vs WMC?
View 1 Replies
View Related
Oct 23, 2009
During installation using 64 bit dvd it says the product key isn't valid, but it works fine on 32 bit dvd.
Any ideas?
View 9 Replies
View Related
Mar 27, 2012
My main HD won't work on my main computer, it has "error 15 file not found". It works in my old computer and boots fine.It appears the problem is caused by an old install of linux onto that drive. The accepted solution is to use the repair on the install disk and type into console bootrec.exe /FixMbr. It said it was successful but i'm still getting the same error. It then goes to a big red screen with grub command.
View 1 Replies
View Related
Jun 25, 2011
I did a very stupid thing and now need assistance. I have redirect malware or something on my machine.A search on the topic, talked about using ComboFix as part of a solution. I downloaded it, installed it and it started running immediately, before I could do anything else.I know that was not wise.Now trying to start anything results in "Illegal operation on a registry key that has been marked for deletion."
System is Windows 7 Professional.
View 1 Replies
View Related
Feb 27, 2012
All of a sudden the Up & Down Arrow Keys, the Page Up & Page Down Keys, the Home & End Keys no longer work properly. Whenever I click on any of them nothing happens or I am taken to the very bottom of the page. The only way I can move up & down the page is to use the Scroll Bar.
View 2 Replies
View Related
May 11, 2011
The last few times I have restarted my windows 7 PC everything goes according to how it should, the desktop appears in under two minutes but nothing will work. I can click on any icon and nothing happens then after about 20 minutes evey programme I clicked on earlier will open one after the other. after closing these progs the comp performs normally, I noticed that even Ctrl alt and delete does nothing during this period of disobedience, anyone had this before? It's a hi-spec machine with 4 gigs of mem
View 4 Replies
View Related
Jun 8, 2009
I followed the turorial and tried three or four times to make a VHD and it works but upon re-booting my PC the VHD I created is gone. I can get it back by re-attaching it but reboot and it's gone again. Oh my Bios is set up correctly in case any one asks.
View 2 Replies
View Related
Aug 28, 2012
I went on vacation for 4 weeks after returning, I plugged my pc back in and try to start it. After booting it shows me ''Starting Windows'' and reboots so I tried starting safe mode but that showed me a black screen and did nothing. I also tried Reinstalling Windows but the same thing happens It loads the files and then black screen nothing works. So I decided to use another hard drive but it also didn't work the same thing happens.My pc is an Alienware Aurora R2 with Windows 7 Home Premium 64 bit Not really sure what my specs are but my videecard is an HD Radeon 5670 I have a seagate hd 500gb My processor is an i3 not sure what sort but a dual core 3,02 Ghz and I have 3gb ram the motherboard is made for Alienware not sure what it's called.
View 2 Replies
View Related
Nov 23, 2012
I'd like to know what is "bitcoin" and how it works...
View 8 Replies
View Related
Jan 24, 2009
When I try to install, I get an error in the beginning after the initial web update, every single time...
It says something about not having all the files available for installation? How is that possilible if I can succesfully install it on my other system? Any help is GREATLY appreciated.
I am also installing the CD on an external DVD/RW drive, since this old PC does not have a DVD drive installed. It also does not support USB 2.0. (1.0 only)
By the way, Windows 7 on my laptop has been running great! But my PC used to run 100 times faster with Windows XP. Is there any way I can get my PC running with Windows 7 just like my laptop, and even faster like before?
View 9 Replies
View Related
Jul 1, 2009
I'm having some trouble with media center, and actually also other video players..
I've been trying for some time to get media center running, but I keep having trouble with the codecs.
I'm running win 7 build 7100. First I installed ffdshow and used the MCDU to get media center to use ffdshow, and it worked. But then suddenly out of nothing about a week ago it didn't work anymore. When I tried to play a video-file I got the decoder error from media center telling me th-at the codec isn't working or isn't installed. It's all types of video files, avi, video_TS and so on. I then tried to uninstall ffdshow and install it again, but it didn't help. I then tried to uninstall again and install a different codec-pack. Didn't help. I have tried to install many different codec-packs but nothing helps.
Then I tried to play the video files using other media players. When playing video files in VLC the picture is kind of pixellated, doesn't look good at all (it's like watching the picture of Ripley's daughter as an old woman in Aliens if you remember).
I can't find a solution to this problem as I don't know what is wrong.
View 9 Replies
View Related
Feb 21, 2012
I replaced an XP laptop with a Windows 7 machine. When I VPN into our 10 network I can't get to any 192.168.5 addresses. The XP machine works fine and I have used it this way for 6 years, only the Windows 7 doesn't. I looked at a lot of settings but I can't find anything out of sorts. Any clues? My ipconfig ip is whatever my local router is ex 192.168.1.x and my local connection 2 is a 10 network address.
View 3 Replies
View Related
Oct 15, 2012
For years I've had an internet provider that required me to use certain IP addresses, assigned to me by that provider. It worked perfectly fine all the time.Now, for several reasons, I have a new provider. This one requires auto detection for the IP address (or whatever it is called in English, "Automatisch beziehen" in German). And now I often have connection problems on the PC in my study, which is connected via router. Then I can't access the internet. Windows shows me my usual connection which is called Network 2 and tells me it has no connection, and it also shows me a new Unidentified Network which it obviously created by itself which also has no connection.Unplugging and re-plugging the network cable doesn't help; Windows does a new network scan then but the problems remain. I have to re-boot, sometimes even two or three times, and then all of a sudden the Unidentified Network is gone and my regular Network 2 is working again.
View 5 Replies
View Related
