PC Boots But Nothing Works?
Aug 28, 2012
I went on vacation for 4 weeks after returning, I plugged my pc back in and try to start it. After booting it shows me ''Starting Windows'' and reboots so I tried starting safe mode but that showed me a black screen and did nothing. I also tried Reinstalling Windows but the same thing happens It loads the files and then black screen nothing works. So I decided to use another hard drive but it also didn't work the same thing happens.My pc is an Alienware Aurora R2 with Windows 7 Home Premium 64 bit Not really sure what my specs are but my videecard is an HD Radeon 5670 I have a seagate hd 500gb My processor is an i3 not sure what sort but a dual core 3,02 Ghz and I have 3gb ram the motherboard is made for Alienware not sure what it's called.
View 2 Replies
ADVERTISEMENT
Mar 17, 2012
I have 2 drives, I did a clone win7(c/ partition) on disk 1 to disk 2 with EASEUS Todo Backup Free 4.0, but the cloned disk will not start up, how to activate it so it boots up
View 3 Replies
View Related
Sep 16, 2012
My HP Laptop is booting to the system diagnostic screen and not to Windows. I have already used virus scanning programs and found nothing. Is it possible that it is a problem with the system or does it sound like a bad key on the keyboard?
View 2 Replies
View Related
Jan 17, 2013
I just upgraded my cpu,mobo,ram and HDD recently and I am having some issues. I have the Phenom ll 3.2ghz 1090T amd cpu with the ASRock 970 Extreme 3 mobo with 2x4gb Corsair Vengeance ram. My problem is that when I try to use my ram, my pc freezes on the Starting windows screen while the bubbles are coming together to make the microsoft logo. I am using my old ram that is a 2gb 1333 ram. I have another stick of the same ram but I am unable to use that as well. My OS has all its updates and I am completely stuck right now and a lil frustrated. I have consulted many people and nothing has worked.
View 9 Replies
View Related
Feb 25, 2012
I have a gaming laptop asus g71g with windows 7 loaded on it. When I try to boot up it gets to right before the windows symbol would load and the screen just goes black but the comp stays on.
View 1 Replies
View Related
Jun 29, 2012
I have had a strange problem.Windows 7 only boots up every other boot. In between the computer hangs at the Advent screen.I have been into MSconfig and in start up disabled all and in Services, again disabled all and hidden Microsoft.It now starts up ok but will I have caused other issues by disabling all and hiding Microsoft?
View 8 Replies
View Related
Jul 22, 2012
Turn my labtop and get thisFor atheros pcie Ethernet controller v2.0.1.9(12/15/09),Don't know if I need a windows7 boot up disc. I tryed useing a repair disc I made of my friends windows7 labtop to fix but it didn't work.
View 1 Replies
View Related
Sep 14, 2010
A few weeks back the PC would not wake up from it's sleep mode so I turned it off and it fixed the problem but now when I turn the PC on it boot's and I hear the 'MS jingle' but I am looking at a black screen, after hitting the restart button it start's up and I get the massage the PC was not closed down properly what mode do I wish to start it in, I have checked the task manager before closing down a number of times and there has been nothing running at close down?
View 8 Replies
View Related
Jan 21, 2013
I built a new pc with AMD fx8150 with ASUS M5A97R 2.0 .I had never seen such a bios before with so many complications so loaded bios default and installed OS Win 7 Ultimate x64. (Bios showed 2 DVD drives in boot selection menu when i have only one).I completed the installation and when rebooted the windows returned with error "disk read error occurred-press ctrl+Alt+del to restart) and this continues for 3-4 times and suddenly 5th attempt will boot my windows.sometimes it will only boot after i enter the BIOS>Boot Menu>Boot Priority and select BOOT OVERRIDE option.
View 9 Replies
View Related
Nov 1, 2009
I did have the following setup, on a single drive, two partitions:
345GB: Windows XP (installed first)
120GB: Windows 7
I've made a slight mistake – I've deleted the partition which hosted the MBR for my dual boot setup.
Basically, I have a single hard drive split into two partitions. I thought that I was thoroughly satisfied with Windows 7, so I decided to delete the partition which XP was sitting on. Little did I realise/remember at the time, but the XP partition held all the boot information, thus rendering my newly formed single partition unbootable. I booted GParted to ensure that my partition was intact, and it showed the following:
/dev/sda1 Extended 465GB LBA
/dev/sda5 NTFS 465GB Boot
(I manually flagged /dev/sda5 as 'boot')
This all appeared normal to me, so I put my Windows 7 disc in and attempted the various repair options. In my experience (with XP), FIXMBR from the command prompt usually fixes the issue, in this situation it hasn't. I've also tried 'BootRec.exe /fixmbr' & 'BootRec.exe /fixboot'. None of which seem to work.
My last attempt at fixing this was using the 'Startup repair' option on the Windows 7 disc. This hasn't worked either.
Can someone perhaps kindly offer me a solution? I'd rather not reinstall Windows.
View 4 Replies
View Related
Jan 15, 2013
My windows 7 ultimate x64 was running perfectly well and fast until my Powercool 80 plus 7500W PSU burst (died) i then got a replacement Crosair CX600 600W. I installed the new PSU then power up my PC, It is then when i discovered it takes forever Windows to boot up, and mostly it does not boot up at all.I am suspecting some sort of Hardware damage caused by PSU burst.Checked my RAM on different PC works fine.Checked my Graphic Card on different PC works fine.
View 5 Replies
View Related
Dec 9, 2011
So just a few minutes ago my desktop was running fine and all. I was opening and reading documents off my flash drive when all of a sudden it turned off and proceeded to restart. Upon passing the POST screen, it comes to an error page that says boot device not found. Just FYI I have a WD 250GB boot drive and two additional Samsung 1TB drives set up in RAID 1 NTFS. So I look in BIOS for my boot drive and find it there and it says its working. However, when I try to set the WD boot drive as the first boot device, it does not show it as an option at all. Only my raid drive shows up along with removable drive, and cd drive.I need some ideas as to what could have caused this. The WD drive is a few years old, but I don't think the drive would have just died like that; there were no previous cues for the hard drive starting to fail. It still shows up in BIOS and powers up.I wanna hope that the MBR was somehow corrupted, which should be an easy repair I think if I can get my hands on the ISO file. Also, it's Windows 7 Ultimate 64 bit
View 4 Replies
View Related
Jan 28, 2012
when i first turn on my computer it makes a clicking sound then i get a black screen with just the mouse cursor, if i restart if it works fine, it does this every time if its off a hour or so. its a dell insperon 560 desktop less than a year old, ive spend 3 or 4 hrs will dell tech on phone to no avail, they have tried all kinds of repairs? i think its the hard drive and they are trying to patch it till im out or warranty 28 days left.
View 2 Replies
View Related
Feb 19, 2012
When I installed windows I had both my ssd and my hard drive plugged in, but when it wanted me to select a drive to boot to I highlighted the ssd and clicked next.It installed windows on it and all is good. But then when I went to change some stuff in the bios, I noticed it had my 1tb hard drive as the boot device. Windows is installed to the sdd so I was really confused by this. I tried making the ssd the first boot device but it didn't work, so I just changed it back to my hard drive for now, but I would like to know what's going on. Looking in the windows partition manager right now it does say my ssd is the boot drive. But my hdd does have a system reserved partition on it that's listed as system and active, my ssd is listed as boot and crash dump. Here's a picture of what I'm talking about.
View 7 Replies
View Related
Feb 11, 2010
yesterday I took out one of my 4 HDD's (I call it HDD -A-) to hookup on another PC and when I restarted my machine (where HDD -A- was in) it didn't boot. I already changed boot order in bios to the HDD -B- (win7). I always have to boot from HDD -A- to be able to boot HDD -B- win7. My question:
A few months back I booted from win7 CD and used repair and I think it put the bootsector/MBR/...?? on the wrong HDD. My HDD's are fine. No bad blocks.
Looking for simple solution without having to setup all again.
View 14 Replies
View Related
May 23, 2012
I just turned on my computer and it booted but I can't click anything, not even right click. The keyboard seems to work, and in Safe Mode everything is fine, too. The Computer is only a week old so I'm kinda pissed off.
View 3 Replies
View Related
Oct 15, 2012
my sustem windows 7 freezes after it boots
View 1 Replies
View Related
Sep 27, 2009
Everything was working however now I can only boot into safe mode regular or networking. When I try to boot normal either it reboots or goes into recovery mode.
Suggestions!?
View 2 Replies
View Related
Oct 18, 2011
Windows 7 will not boot into NORMAL mode. It will only boot into SAFE mode.This Windows does not provide the option: Boot into last good configuration....It only offers: SAFE SAFE with Networking normal In Safe Mode, I can not get Windows to react to a hard network connection.I don't know how to get out of the SAFE mode loop and force Windows back into NORMAL mode.
View 3 Replies
View Related
Dec 6, 2011
I use Windows 7 Pro on my Sony VAIO Laptop and I have noticed in the last few weeks that it has became slower and slower so I did the defrag, virus check, disk clean up, windows tweaks and tips un-checked most of the start-up programs and it did make the computer faster except for the boot and shut down and the average time is around 3 minutes for both, so what else can I do before I decide to reformat and set it back to factory settings
View 2 Replies
View Related
Aug 27, 2011
When I start up my laptop (HP Pavillion dv5-1125nr, Windows 7 Ultimate ~3 years old) it loads normally... Until it hits the login screen. The , it starts to go, makes the sound... Then goes black.I just had my monitor and motherboard replaced for another issue I was having, so I don't think it's a physical issue. I have also ran a few malware/spyware tests and nothing comes up. My diagonstics, as well, turn up cleanly.The laptop runs perfectly in safe mode, however
View 1 Replies
View Related
Oct 17, 2012
Windows will only boot into startup repair no matter what. The issue is startup repair was unable to fix the problem. [code]
View 3 Replies
View Related
Nov 17, 2012
today I was cleaning around my computer area and well was dusting where my computer sits and I pushed it too far out and it fell and hit the ground. It was on too and the monitor lost signal even though the VGA cord was plugged in...Since I couldn't properly shut it off by going to start etc etc I just held the power button till it shutdown..I thought my video card got loose so I hit the kill switch unplugged it and checked everything,but it was all fine. When I plugged it back in,it turned on and well kinda lagged on start up,more than usual...I figured everything was fine until I shut it down and after it was off like 5 seconds later it turned on by itself?? I checked my motherboard and components for any damage or cracks but couldn't find anything. Now this I do not mind,i'm just afraid that it'll cause damage to my PC or cause my motherboard to fry or something because now in order to keep it off from starting byitself I have to shutdown then quickly hit the kill switch,sometimes I dont do it fast enough and the computer slightly turns on,too fast to stop me from switching it off. Also when I hit the killswitch to off and then switch it back on.the pc refuses to start itself until I push the ON button and shutdown again.
View 4 Replies
View Related
Nov 17, 2011
I am using windows 7 home basic service pack 1.I had changed the color when windows 7 loads to white color that is after i enter the password when windows is booting i had changed the color to white now i want it to be restored to black but i have forgotten how to do it if any one knows how to do it that will be great.
View 9 Replies
View Related
Feb 22, 2012
Running Win 7 Home Premium 64 bit on a Lenovo Ideapad Laptop.Two days ago, I was trying to make my monitor display just a little less contrast, so I opened a utility called Intel HD Graphics that I found on the bottom right toolbar, and it had sliders with which I fixed the problem. But then I noticed a slider called "Hue", and by moving that quickly from side to side, my monitor went from blue to green to pink to yellow and back again, what can I say, I'm easily entertained.Anyway, the computer froze up, and I had to rude boot it. From then on, I would start the computer, and it would look good, like it would start for real, and I would even see some icons on the desktop, but then it would freeze up and I'd have to rude boot it again. It still works in Safe Mode.
View 1 Replies
View Related
Sep 18, 2012
Magnifier is ON each time PC boots - How to prevent this ?
View 1 Replies
View Related
Oct 27, 2012
[CODE] - When i press the repair computer it won't work and boots.
View 8 Replies
View Related
Dec 27, 2012
I've checked the bios, task scheduler, power settings. I can'y figure out why it is booting up every day at 3am. I can replicate by changing the clock to just befor 3am and then shutdown.
View 9 Replies
View Related
Nov 25, 2011
I"m new to computers, so I will try to be clear as possible.But I have a question about my pc.I turned on my pc and i heard the fans, but the sound was too long and went from low to high. And stops.Then my monitor did turn on, I saw a little message.Then all of the sudden it goes to sleep mode (orange button).After that my system cabinet has that same sound when I turned it on. And stops.
View 9 Replies
View Related
Jul 4, 2012
I built a computer, and I am using a Coreâ„¢ i5-3570K Processor w/ Gigabyte GA-Z77-D3H Motherboard, and I am using the stock CPU Fan (that comes with the Processor), I noticed that the CPU Fan only spins when the computer is booting, then stops spinning when it has finished booting (when windows has fully loaded). When I go into my BIOS Settings, the CPU Fan still spins. But when it boots Windows, it suddenly stops. I have tried unplugging my CPU Fan from the motherboard and plugging it in again, but that doesn't seem to fix it. It is in the correct socket.
View 9 Replies
View Related
Jun 6, 2011
rite i've managed to make a pig's ear of my boot. my windows still boots ine.....butmy boot menu is blank in msconfig boot tabis blankeasyBCD cant see any boot info and asks me for it, it wont write any boot info.bcdedit constantly says the store import operation has failethe device is not ready"in repair also when i try to do anything i.e. importbootrec.exe in repair also doesnt recover it.what im trying to do is have a boot menu, where i have the option for win 7 then a pen drive with a linux disto on it then also CDrom as i normally chop and change between all them 3 onthis pc and im sick of going in the bios 4 times a day to change these options.
View 4 Replies
View Related
